Professional Documents
Culture Documents
General Guidelines:
Please carefully read the guidelines before attempting the assignment.
▪ Using NX, develop 3D solid models for all the problems and these models
should be ready for rapid prototyping.
▪ Models should be developed according to the provided dimensions.
▪ Extract three projection views of each part on an A4 sheet using third
angle convention. Add and fill up title block.
▪ Models should be ready for rapid proto-typing.
▪ Submit the hard copy as well as soft copy. Zips all the files & post them
on Blackboard with your name_id as file name.
▪ The homework will be followed by a quiz.
▪ Due date is next week as usual.
Problem # 1:
Cordless Phone Cover
Hints:
You should use the following tools to complete your model.
Extrude
Pattern Feature (Linear and Circular)
Mirror Feature
Shell Feature
United Arab Emirates University
Department of Mechanical Engineering
Problem #2
Develop the model of the cover block shown below.
Hints:
You should use the following tools to complete your model.
Extrude
Pattern Feature (Linear and Circular)
United Arab Emirates University
Department of Mechanical Engineering
Problem #3
Connecting Rod
Hints:
Use Extrude feature
Use Mirror command
United Arab Emirates University
Department of Mechanical Engineering
Problem # 4
Flanged Elbow
Make 3D solid model of the flanged elbow as per the given dimensions
Hints:
You should use the following commands to complete your model.
Good luck