Professional Documents
Culture Documents
• Input : SDI(2EA,BNC)
• Resolution 1280 X 768
Analog(3EA,BNC), DVI-I(1)
• Aspect ratio 15:9
• Output : SDI(1EA,BNC)
• Contrast 400:1
Analog(3EA,BNC)
BLM-170 • Viewing Angle : 176 ˚
• Power:12V DC (11V-17V) / AC100-230V
( 17 Inch HD LCD Monitor ) • Rack Kit, V-Mount, Hood
• Dual Link Model” (Option)
• Input : SDI(2EA,BNC)
• Resolution 1440 X 900
Analog(3EA,BNC), DVI-I(1)
• Aspect ratio 16:10
• Output : SDI(1EA,BNC)
• Contrast 1000:1
BLM-190 Analog(3EA,BNC)
• Viewing Angle : 160 ˚
(19 Inch HD LCD Monitor )
• Power: AC100-230V
• Rack Mount
-- 2 --
• Resolution 1366 X 768 • Input : SDI(2EA,BNC)
• Aspect ratio 16:9 Analog(3EA,BNC), DVI-I(1)
• Contrast 1000:1 • Output : SDI(1EA,BNC)
BLM-320 • Viewing Angle : 178 ˚ Analog(3EA,BNC)
( 32 Inch HD LCD Monitor ) • Power: AC100-230V
• Dual Link Model (Option), Wall Bracket
-- 3 --
IMPORTANT SAFETY INSTRUCTIONS
1. Read all of these instructions.
2. Save these instructions for later use.
3. All warnings on the product and in the operating instructions should be adhered to.
4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
5. Do not use attachments not recommended by the appliance manufacturer as they may cause
hazards.
6. Do not use this appliance near water “ for example, near a bathtub, washbowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool, etc.
PORTABLE CART WARNING
7. Do not place this appliance on an unstable cart, stand, or table. (symbol provided by RETAC)
The appliance may fall, causing serious injury to a child or adult, and
serious damage to the appliance.
Use only with a cart or stand recommended by the manufacturer, or
sold with the appliance.
Wall or shelf mounting should follow the manufacturer instructions, and
should use a mounting kit approved by the manufacturer.
An appliance and cart combination should be moved with care. Quick
stops, excessive force, and uneven surfaces may cause the appliance
and cart combination to overturn.
8. Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to insure
reliable operation of the appliance and to protect it from overheating, these openings must not be
blocked or covered.
The openings should never be blocked by placing the appliance on a bed, sofa, rug, or other similar
surface.
This appliance should not be placed in a built-in installation such as a bookcase unless proper
ventilation is provided.
9. This appliance should be operated only from the type of power source indicated on the marking label.
If you are not sure of the type of power supplied to your home, consult your dealer or local power
company. For appliance designed to operate from battery power, refer to the operating instructions.
10. This appliance system is equipped with a 3-wire grounding type plug (a plug having a third
(grounding) pin).
This plug will only fit into a grounding-type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet, contact your electrician to replace obsolete outlet.
Do not defeat the safety purpose of the grounding plug.
11. For added protection for this product during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable
system.
This will prevent damage to the product due to lightning and power-line surges.
12. Do not allow anything to rest on the power cord.
Do not locate this appliance where the cord will be abused by persons walking on it.
13. Follow all warnings and instructions marked on the appliance.
14. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
15. Never push objects of any kind into this appliance through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the appliance.
16. Do not attempt to service this appliance yourself as opening or removing covers may touch
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
-- 4 --
17. Unplug this appliance from the wall outlet and refer servicing to qualified service personnel under
the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the appliance.
c. If the appliance has been exposed to rain or water.
d. If the appliance does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as improper adjustment
of other controls may result in damage and will often require extensive work by a qualified
technician to restore the appliance to normal operation.
e. If the appliance has been dropped or the cabinet has been damaged.
f . When the appliance exhibits a distinct change in performance this indicates a need for service.
18. When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
19. Upon completion of any service or repairs to this appliance, ask the service technician to perform
routine safety checks to determine that the appliance is in safe operating condition.
FCC NOTICE
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions :
(1)This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
To assure continued compliance, follow the attached installation instruction and do not make any unauthorized
modifications.
Note:
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The user may find the booklet “Something About Interference” available from FCC local regional offices
helpful.
Warning :
To assure continued FCC emission limit compliance, the user must use only shielded interface cables when
connecting to host computer or peripheral devices. Also, any unauthorized changes or modifications to this
equipment could void the user’s authority to operate this device.
-- 5 --
SAFETY PRECAUTIONS
WARNING :
CAUTION -TO REDUCE THE RISK OF FIRE OR SHOCK
RISK OF ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS
DO NOT OPEN EQUIPMENT TO RAIN OR MOISTURE.
-TO REDUCE THE RISK OF FIRE OR SHOCK
CAUTION: TO REDUCE THE ELECTRICK SHOCK.
HAZARD, KEEP THIS EQUIPMENT AWAY
DO NOT REMOVE COVER (OR BACK). FROM ALL LIQUIDS. USE AND STORE ONLY
NO USER SERVICEABLE PARTS INSIDE. IN LOCATIONS WHICH ARE NOT EXPOSED
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL TO THE RISK OF DRIPPING OR SPLASHING
LIQUIDS, AND DO NOT PLACE ANY LIQUID
CONTAINERS ON TOP OF THE EQUIPMENT.
The lightening flash with arrowhead symbol, CAUTION :
within an equilateral triangle, is intended to
alert the user to the presence of In order to maintain adequate ventilation, do not
uninsulated “dangerous voltage” within the install or place this unit in a bookcase, built-in
product’s enclosure that may be of cabinet or any other confined space. To prevent
sufficient magnitude to constitute a risk of risk of electric shock or fire hazard due to
electric shock to persons. overheating, ensure that curtains and any other
materials do not obstruct the ventilation.
The exclamation point within an equilateral
triangle is intended to alert the user to the CAUTION :
presence of important operating and
maintenance (servicing) instructions in the
TO REDUCE THE RISK OF FIRE OR SHOCK
literature accompanying the appliance. HAZARD AND ANNOYING INTERFERENCE,
USE THE RECOMMENDED ACCESSORIES
THIS EQUIPEMNT MUST BE GROUNDED ONLY.
To ensure safe operation, the three-pin plug must be CAUTION :
inserted only into a standard three-pin power outlet
which is effectively grounded through normal This apparatus can be operated at a voltage in
household wiring. Extension cords used with the the range of 100-240 V AC.
equipment must have three cores and be correctly Voltage other than 120V are not intended for
wired to provide connection to the ground. Wrongly U.S.A and Canada.
wired extension cords are a major cause of fatalities.
The fact that the equipment operates satisfactorily CAUTION :
does not imply that the power outlet is grounded or Operation at a voltage other than 120V AC may
that the installation is completely safe. require the use of a different AC plug. Please
For your safety, if you are in any doubt about the contact either a local service center for
effective grounding of the power outlet, please assistance in selecting an alternate AC plug.
consult a qualified electrician.
Notice (U.S.A. only) :
CAUTION: This product has a fluorescent lamp that
THE AC RECEPTACLE (MAINS SOCKET OUTLET) contains a small amount of mercury. It also
SHALL BE INSTALLED NEAR THE EQUIPMENT contains lead in some components. Disposal of
AND SHALL BE EASILY ACCESSIBLE. these materials may be regulated in your
TO COMPLETELY DISCONNECT THIS community due to environmental considerations.
EQUIPMENT FROM THE AC MAINS, For disposal or recycling information please
DISCONNECT THE POWER CORD PLUG FROM contact your local authorities, or the Electronics
THE AC RECEPTACLE. Industries Alliance: <http://www.eiae.org.>
-- 6 --
Caution for AC Power Cord
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
Appropriate AC Power Cord must be used in each local area.
This symbol on the products and/or accompanying documents means that used
electrical and electronic products should not be mixed with general household waste.
For proper treatment, recovery and recycling, please take these products to designated
collection points, where they will be accepted on a free of charge basis. Alternatively, in
some countries you may be able to return your products to your local retailer upon the
purchase of an equivalent new product.
Disposing of this product correctly will help to save valuable resources and prevent any potential
negative effects on human health and the environment which could otherwise arise from inappropriate
waste handling. Please contact your local authority for further details of your nearest designated
collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for
further information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for the correct
method of disposal.
CE NOTICE
This is Class B product. In a domestic environment this may cause radio interference in
which case the user may be required to take adequate measures.
The apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.
-- 7 --
Contents
1. Outline • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 9
2. Main Features • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 9
3. Controls and Functions (BLM-084,170~550) • • • • • • • • • • • • 10
3-1. Front Panel • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 10
3-2. Rear Panel • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 12
3-3. Tally & Audio • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 14
3-4. Function Buttons for FUNCTION 1 and FUNCTION 2 • • • • • • 15
4. Display Status • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 15
5. INPUT Select Menu • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 16
6. Control and Use of OSD Menu • • • • • • • • • • • • • • • • • • • • • • 17
6-1. Video • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 17
6-2. Display • • • • • • • • • • • • • • • • • • • • • • • • • • • • 18
6-3. Color • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 19
6-4. Marker • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 20
6-5. Audio • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 20
6-6. GPI Control • • • • • • • • • • • • • • • • • • • • • • • • • • 21
6-7. System Configuration • • • • • • • • • • • • • • • • • • • • • • • • • • 21
7. How to use Program Update Port • • • • • • • • • • • • • • • • • • • • • 22
8. Remote Terminal Assignment • • • • • • • • • • • • • • • • • • • • • • • 22
9. List of Compatible Signal Formats • • • • • • • • • • • • • • • • • • • • • 24
10. Specifications• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 25
11. IR Remote Controller • • • • • • • • • • • • • • • • • • • • 29
12. Dimensions • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 30
13. Troubleshooting • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 34
14. Maintenance • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 34
15. Up version and Modification of Product • • • • • • • • • • • • • • • • 34
-- 8 --
1. Outline
This product is the multi-format Digital LCD HD Monitor to display various kind of
digital video input signal as HD/SD-SDI Digital and analog signal such as Composite
YC, RGB DVI/PC-RGB and Component.
This is also High Definition Broadcasting Monitor which can make it available to do
output of stable video signal with the menu of considering convenient user interface
and the easy control for brightness and color, and by EQ function of HD-SDI input part.
2. Main Features
Diagonal Line Compensation by MADI (Motion Adaptive De- interlace) and LADI
(Low Angle Diagonal Interpolation)
Waveform, Time Code Display, Under Scan/ Zero Scan / Over Scan / Zoom
Audio Input/Out, Audio Metering Display, Built In Speaker, Ear Phone Jack
Optional Accessory :
- ND Filter (BLM-S/D Models)
- Wall Mount (BMT-10W, BMT-20W, BMT-30W, BMT-50W) -
- Rack Mount (BLM-084/ BLM-170/ BLM-190/ BLM-200/ BLM-240)
- V Mount (BLM-084/BLM-170) / HOOD (BLM-084/ BLM-170)
- Carrying Case
-- 9 --
3. Controls and Functions
① INPUT SELECT
This is used to select Analog input and OSD menu is displayed for this.
② SDI 1, SDI 2 INPUT SELECT : This is for selecting SDI CH1 and CH2 input.
③ SCAN : This function is for converting into Under Scan or Zero Scan or Over Scan Mode or
Zoom.
-- 10 --
④ MARKER
For Marker selecting button, ‘Marker’ is displayed on screen.
In case input signals are DVI ,RGB, PC-RGB and YUV, Marker is not displayed.
! FUNCTION 1(F1)
⑤
Function buttons are selected from SYSTEM menu. They are operated by F1, F2 Buttons.
⑥ FUNCTION 2(F2)
1) In case it is not OSD Menu working, it works to be the selected function on the SYSTEM
Menu.
2) When OSD Menu setting, it works as a DOWN (▼) Button.
⑦ BLUE / GRAY
1) Each time, user can press the button, the mode changes as follows.
(BLUE Only -> GRAY -> Normal)
2) When on OSD Menu, it works as a UP(▲) Button.
* BLUE Only : Only Blue signal is displayed on screen.
* GRAY : with color off, only Luminance is displayed.
GRAY(Mono) function operates in SDI1,2, CVBS1,2,3 and YC mode.
⑧ MENU
When pressing button, OSD menu is displayed.
⑨ ENTER / ADJUST
1) OSD Menu setting is by Enter key. Save setting functions, after that, move to next step.
2) Except for Menu operation, each time you press the ADJUST button, it changes sequentially.
” Brightness” ->”Contrast”-> “Phase(Hue)”-> “Saturation”-> “Sharpness” -> Speaker Volume
and then, control Bar is displayed on screen bottom and the set Button of UP(▲) , Down (▼) button
can change and can be saved to be function of ENTER/ADJUST button.
⑩ STANDBY
It can be used to be power on/ off button.
⑪ IR Remote receiver (BLM-320,420,470,550)
This is for BLM-320 to BLM-550 products.
-- 11 --
3.2 Rear Panel
Rear (BLM-084)
Side (BLM-170)
Real/Side (BLM-190~550)
-- 12 --
BLM- Series
④,⑤,⑥ : CVBS (Composite) 1,2,3 /Y, Pb, Pr / R, G, B / Y,C Input Terminal (BNC)
These are for Analog input terminal. Possible to use 3 types of input signal.
1) Composite 1,2,3.
2) Component Y,U,V(Y,Pb,Pr) and R,G,B.
3) S-Video Y,C signal.
⑪ AC INPUT Terminal
Supply AC power
Use only the power cord designated to ensure safety and EMC
regulation of each countries.
! Do not use AC and DC power together. It may be cause of fire or product defective.
-- 13 --
3-3 Tally & Audio
1) Tally
Tally Lamp
-- 14 --
3-4 Function Buttons for FUNCTION 1 and FUNCTION 2
4. Display Status
The function of displaying the mode to confirm the operating status of product.
Some functions are not able to support according to option.
Closed Caption Display : Standard 608(CVBS & Component: NTSC/PAL)
Time Code
Display
(Option)
Video
Waveform
Menu Position: Left-Top, Left-Bottom, Right-Top, Right-Bottom, Center (Option)
-- 15 --
1) Audio Level Display Mode (BLM-084/170/190/240/260/320/420/470/550)
Used Audio Level Display Mode from Audio Setup Menu as selecting On/Off.
On : Left (even channel), Right (odd channel) OFF : Make Off of Level Bar.
Display Position : Possible to display at the top/bottom of the screen.
-- 16 --
6. Control and Use of OSD Menu
1. Press “MENU” button for OSD Display .
2. Press “ENTER” button after menu selection by using UP (▲) / DOWN (▼) button.
3. Adjust status on the selected item with ENTER and UP (▲) / DOWN (▼) button.
4. Move to previous menu by using MENU button and OSD screen is finished as pressing menu
continuously.
In case there is no input signal or no detected signal, the menu can be erased.
!
When you set menu in inaccurate signal status, it may cause disorder.
MENU setting value is according to input signal mode. Therefore, please check the
!
input mode from the bottom of menu when changing condition which is set.
6-1. VIDEO
▪ Brightness
▪ Contrast : Adjust contrast.
▪ Hue
▪ Saturation
▪ Sharpness
▪ RGB Color Set : Control RGB each Level
in YPbPr,RGB and PC-RGB input mode.
There are Default and User Adjust.
▪ NTSC Setup : Select 0 IRE,7.5 IRE. It operates in 7.5IRE -> NTSC or YUV mode.
▪ Analog Loop : It only works with the product which has loop terminal.
Set up On/Off impedance of Analog Loop output terminals.
Yes ->using Loop output. No -> Not using Loop output.
! When user does not use Loop terminal, select Analog Loop ‘No’.
-- 17 --
6-1-1. VIDEO (RGB,YPbPr)
It is displayed as selecting RGB Color Adjust
to User Adjust when PbPr,RGB and PC-RGB
input mode.
▪ Red Gain : Control gain of Red input.
▪ Green Gain :Control gain of Green input.
▪ Blue Gain : Control gain of Blue input.
▪ Red Bias : Control bias of Red input.
▪ Green Bias : Control bias of Green input.
▪ Blue Bias : Control bias of Blue input.
6-2. DISPLAY
Set screen size mode or display status.
▪ SD Aspect : Set screen mode 16:9 or 4:3.
▪ 1:1 Scan :
ON-> Output the screen with input Pixel
size in SD mode.
OFF ->Output the screen with LCD size
in SD mode.
▪ Anamorphic : Make vertical resize to
see Anamorphic screen (2.35:1) on
720/50P,59.94P mode.
▪ PaP Main : Select input of left main screen from PaP mode.
Possible to select all input signals. (SDI1, 2, CVBS1, 2, 3, S-VIDEO, YPbPr, RGB, PC-RGB, DVI)
▪ PaP Sub : Select input of right sub-screen from PaP mode.
It moves to input mode automatically which can be operated when selecting main screen.
Main and sub-screen have limitation to select.( the same signal and type are not possible)
▪ Waveform Display : (BLM-084/170/190/240/260/320/420/470/550)
Display Video wave of HD/SD-SDI input signal on the screen.
Select 4 display position.
▪ Time Code Display : (BLM-084/170/190/240/260/320/420/470/550)
Display Time Code of VITC area at HD/SD-SDI input signal.
Select display position. (Upper/Lower)
▪ Pixel to Pixel : Available 8.4”, 17” and 19 product only. The output of 1920*1080 is done
without scale down. You are able to set the position of screen to Left Upper, Right Upper,
Left Button, Right Button and Center.
-- 18 --
6-2-1. DISPLAY (PC-RGB)
This is displayed when PC-RGB signal is
selected.
▪ PC SCAN : Set output status as
Fill or Aspect mode.
▪ V. Position : Adjust position of screen in
PC mode input.
▪ H. Position : Adjust horizontal position of
screen.
▪ Phase : Adjust digital converting of SC of
input signal.(VGA)
6-3. COLOR
▪ Color Temperature
Set the white balance or color
temperature on screen among
USER,3200°K,5400°K,6500°K,9300°K, and VAR.
▪ VAR Number-> Selectable from 1 to 63 step and
from 3000°K to 9300°K.
▪ USER-> Adjust RGB Level and color temperature.
▪ R,G,B Gain : Control each R, G, B Gain in USER
mode.
▪ R,G,B Bias : Control each R, G, B Bias in USER
mode.
* Use professional measure to adjust Color Temperature (White Balance) for precise adjustment.
Color Temperature is adjusted by specializing measurement machine to set precisely.
-- 19 --
6-4. MARKER
▪ Marker 16:9
Set the type of marker in case
the aspect ratio setting is16:9.
- Type of Marker
: 4:3,15:9,14:9,13:9, 1.85:1,2.35:1, OFF
▪ Safety Area 16:9
Select the range of SAFETY AREA in
16 : 9 HD screen.
- Safety Area : 95%,93%,90%, 88%,85%
80%, OFF
▪ Safety Area 4:3
Select the range of Safety Area in 4:3
SD mode.
- Safety Area : 95%,93%,90%,88%,85%,
▪ Center Marker : Select ON/OFF for center marker. 80%, OFF
▪ Marker Color : Select Marker color. Color -> White, Red, Green, Blue, Gray, Black
▪ Marker Back Color : Select marker of area for safety in among Normal, Half tone or Black.
▪ Status/Menu Display : Set time and menu information.
Select one of 5sec,10/15/20/25/30~60 sec
▪ Status/Menu Blend : Set transparency of menu and indication window on the screen.
Menu Position: Select for Center, Left Top, Right Top, Left Button, Right Button
Analog Closed Caption: Select for OFF, CC1, CC2. This is for 608 Standard. The function provides
for composite, component signal as 525/60,625/50(NTSC,PAL)
6-5. AUDIO
▪ Embedded Audio (L : left)
Select Digital Audio (L) output from 1 to 16
channels when SDI input.
▪ Embedded Audio (R : right)
Select Digital Audio (R) from 1 to 16
channels when SDI input.
▪ Audio Level Meter
Select ON/OFF for the function which can
display Embedded Audio signal of SDI
input to display a Level bar on the screen.
▪ Level Meter Position : Select position of level
display with upper or Lower.
▪ Speaker Source : Select Speaker output between Line (external input) and SDI
(De-embedded).
▪ Speaker Output : Select Speaker output status among L, R, L/R, MIX and OFF.
▪ Speaker Volume : Select Speaker output level.
-- 20 --
6-6. GPI CONTROL
▪ GPI Control :
Select external control terminal ON/OFF.
It is not possible to control through
Remote terminal from outside or external
area when it is OFF.
▪ GPI Port 1,2,3,4,5,6,7
Select each terminal of external Remote
Control Terminal (RJ-45).
Double function for each port is prohibited.
▪ Remote ID Number : Set the number when controlling IR remote controller (Option)
▪ Serial Remote : Select whether use external Serial Port control or not.
Not operated Key and IR remote controller when Serial Remote is ON.
! To terminate Update Firmware status, press Menu button for about 3 sec.
▪ Setup Load : This menu is the function to make wholly change for function value which has
already been set.
Factory : To return to the factory default.
User 1,2,3 : Menu setting is transferred to the Menu of 1,2,3 to be saved by user.
▪ Setup Save : Save current menu setting. The types of save are USER 1,2,3.
USER 1,2,3 can be used by Setup Load.
▪ Firmware Version : Program version.
▪ Operating Time : Product operating time.
-- 21 --
7. How to use Program Update Port
Program Update Port (RJ-11)
This is for upgrading firmware program, Color Temperature, Gamma and Color Measure. It also
can be used for controlling multi monitor by using exclusive control program on your PC.
1
2 “Through Terminal” is the same function as “Remote Terminal”.
3
4 It is useful to connect with Remote Terminal
5 (Through Terminal: Option)
6
7
Through (RJ-45) 8
-- 22 --
8-2. Remote Terminal Assignment
A A A A
PC (Control S/W)
Specifications can be changeable for the efficiency and quality improvement of this
product without prior notice. Adaptor(RS-485 <-> Remote Board) Converter
-- 23 --
9. List of Compatible Signal formats
9-1. Video Signals
Composite Component HD/SD-
NO Input Signal Formats DVI
Video Y,Pb,Pr R,G,B(SOG) SDI
1 NTSC (525/59.94i) √ - - - -
2 PAL (625/50i) √ - - - -
3 720*480/59.94i(SD/NTSC) - √ √ √ -
4 720*480/59.94p,60p - √ - - √
5 720*576/50i (SD/PAL) - √ √ √ -
6 720*576/50p - √ - - √
7 1280*720/59.94p - √ - √ √
8 1280*720/60p - √ - √ √
9 1280*720/50p - √ - √ √
10 1920*1035/59.94i - √ - √ -
11 1920*1035/60i - √ - √ -
12 1920*1080/24sf - √ - √ -
13 1920*1080/23.98sf - √ - √ -
14 1920*1080/24p √ - √ -
15 1920*1080/23.98p √ - √ -
16 1920*1080/25p - √ - √ √
17 1920*1080/29.97p - √ - √ √
18 1920*1080/30p - √ - √ √
19 1920*1080/50p - - - - √
20 1920*1080/50i - √ - √ √
21 1920*1080/59.94p - - - - √
22 1920*1080/59.94i - √ - √ √
23 1920*1080/60p - - - - √
24 1920*1080/60i - √ - √ √
25 2048*1080/24psf,sf - - - √ -
• When Analog YPbPr mode’s 1035/59.94i, 60i signal input, Marker is displayed in 1080/59.64i, 60i and out put.
• Vertical frequency 23.98, 29.97 and 59.94Hz is displayed as 24, 30 and 60 on the screen.
• Output screen mode can be out put with automatic control in DVI mode.
-- 24 --
10. Specifications
Function BLM-084 BLM-170 BLM-190
Input Channel 2EA, BNC
Input Signal 800mVp-p ± 10%, 75Ω
SDI-INPUT
HD-SDI Signal Max, 1.485Gbps
SD-SDI Signal Max, 270Mbps
Output Channel 1EA, BNC, Selected Output (D series:2EA, BNC, Loop Out)
SDI-OUTPUT
Output Signal 800mVp_p ± 10%, 75Ω
Input Channel DVI With Gender (DVI +Gender 15Pin)
VGA INPUT Analog Level R, G, B : 0.7Vp-p, H/V Sync : 4V ± 1Vp-p
Input Mode 640 X 480 up to 1280 X 1024, max 1600 X 1200
Input Channel 1EA, DVI-I, 24pin, Female
DVI INPUT DVI – Interface TMDS Single Link (DVI Standard)
DVI Digital Mode 640 X 480 up to 1920 X 1200 640 X 480 up to 1920 X 1200 640 X 480 up to 1920 X 1200
-- 25 --
Function BLM-200 BLM-240 BLM-260
Input Channel 2EA, BNC
Input Signal 800mVp-p ± 10%, 75Ω
SDI-INPUT
HD-SDI Signal Max, 1.485Gbps
SD-SDI Signal Max, 270Mbps
SDI- Output Channel 1EA, BNC, Selected Output (D series:2EA, BNC, Loop Out)
OUTPUT Output Signal 800mVp_p ± 10%, 75Ω
Input Channel DVI With Gender (DVI +Gender 15Pin)
VGA
Analog Level R, G, B : 0.7Vp-p, H/V Sync : 4V ± 1Vp-p
INPUT
Input Mode 640 X 480 up to 1280 X 1024, max 1600 X 1200
Input Channel 1EA, DVI-I, 24pin, Female
DVI – Interface TMDS Single Link (DVI Standard)
DVI INPUT
640 X 480 up to 1920 X
DVI Digital Mode 1200
640 X 480 up to 1920 X 1200 640 X 480 up to 1920 X 1200
DIGITAL SMPTE-260M
1035i(60/59.94)
(1920*1035)
FORMAT
SMPTE-259M/125M
480i(59.94)
/ITU-R 576i(50)
BT656(720*480/576)
Speaker Internal 2EA 2EA 2EA
Size 20” 24” 26”
Resolution 1680 X 1050 1920 X 1200 1920 X 1200
Pixel Pitch 0.258 mm 0.270 mm 0.2865 mm
Color 16.7M 16.7M 16.7M
LCD R/L : 178 , U/D : 178 R/L : 178 , U/D : 178 R/L : 178 , U/D : 178
Viewing Angle degrees degrees degrees
Luminance of White 300 cd 400 cd 500 cd
Contrast Ratio 800 : 1 700 : 1 800 : 1
Display Area (H X V) 433.4 X 270.90 mm 518.4 X 324 mm 550 X 343.8 mm
DIGITAL SMPTE-260M
1035i(60/59.94)
(1920*1035)
FORMAT
SMPTE-259M/125M
480i(59.94)
/ITU-R 576i(50)
BT656(720*480/576)
Speaker Internal 2EA 2EA 2EA
Size 32” 42” 47”
Resolution 1366 X 768 1920 X 1080 1920 X 1080
Pixel Pitch 0.170*0.510 mm 0.4845 mm 0.5415 mm
Size 55”
Resolution 1920 X 1080
Pixel Pitch 0.630 mm
Color 16.7 M
30°
6M(20ft)
30°
Operation Range of IR Remote Controller is 30° (up, down, left and right) and
operation distance is about 6M(20ft).
-- 29 --
12. DIMENSIONS
Battery Pack VESA Mounting Hole
V-Mount (75*75mm)
Hole Size M4, Depth 10mm
-- 30 --
VESA Mounting Hole
(100*100/75*75mm)
Size M4, Depth 10mm
-- 31 --
WALL Mounting Hole
(300*270mm)
Size M8, Depth 20mm
-- 32 --
WALL Mounting Hole
(600*400mm)
Size M8, Depth 20mm
-- 33 --
13. Trouble Shooting
Solutions to common problems related to the monitor are described here.
If none of the solutions presented here solves the problem, unplug the monitor and consult
an authorized dealer or service center.
14. Maintenance
▪ When a still video of LCD is displayed for a long time, it may appear wrong image by
heating on the screen. This is due to the characteristics of the LCD display and is not
malfunction. After power off for a moment, start over again.
▪ The red spots, blue spots and green spots on the panel surface are a normal characteristic
of LCD displays, and it is not a problem. The LCD display is built with very high precision
technology, however, be aware that a few very small pixels may be a little troubled by
crossing each other or lighting.
▪ Periodic maintenance inspection time of backlight is about 50,000 hours.
▪ Periodic maintenance inspection time of fan motor (option) is about 10,000 hours.
-- 34 --