Professional Documents
Culture Documents
Valve stem scratched. 3 Disassemble the valve and inspect the stem.
Replace the stem and plug, if necessary.
Reassemble the valve with new.
Valve leaks internally Problems with actuator 4 Check the system supply pressure. Compare
when shut-off. supply pressure. measured supply pressure to requirements
given on the Top Assembly drawing. Check
the setting and operation of all supply
regulators and needle valves. Check filters
for excessive dirt accumulation.
This document contains proprietary information with all rights and titles reserved and may not be reproduced, disclosed or used in whole or part without
written authorization from Control Components, Inc.