This document discusses 8 status messages that can be activated on the DIP-5 device to provide information about the status of various bodybuilder components. It provides details on the parameters to configure each status message, their possible values, and additional information. It also includes a table listing the message ID, text, pictogram, and suggested application for each status message.
This document discusses 8 status messages that can be activated on the DIP-5 device to provide information about the status of various bodybuilder components. It provides details on the parameters to configure each status message, their possible values, and additional information. It also includes a table listing the message ID, text, pictogram, and suggested application for each status message.
This document discusses 8 status messages that can be activated on the DIP-5 device to provide information about the status of various bodybuilder components. It provides details on the parameters to configure each status message, their possible values, and additional information. It also includes a table listing the message ID, text, pictogram, and suggested application for each status message.
Parameters that define the eight bodybuilder status
messages that can be activated on the DIP-5.
If BB-CAN message PropB_CXB via BB-CAN
if not garbage truck or hardwired bodybuilder signals, signal 5 and 6 are available on the bodybuilder connector 21-pin (A156) if Hardwired bodybuilder signals, input 1-6 can be used on the bodybuilder connector 21-pin (A156)
Status messages on DIP
Refer to the Message ID table for the corresponding text and pictogram.
Customer Parameter explanation Range Additional information
parameter code
1-251 Status message 1 0-20
1-252 Status message 2 0-20 1-253 Status message 3 0-20 1-254 Status message 4 0-20 1-255 Status message 5 0-20 1-256 Status message 6 0-20 1-257 Status message 7 0-20 Can only be activated via BB-CAN 1-258 Status message 8 0-20 Can only be activated via BB-CAN
Status Message table
The following table contains the DIP status message texts, pictograms and suggested use of the status message.
Message Text shown Pictogram Suggested
ID on DIP-5 application:
0 Body: Indication that the
Ready body is ready for use. DSYM0397
1 Body: The body is
Malfunction currently unable to become operational DSYM0349 due to one or more functional or structural failures. 2 Body: The hydraulic fluid Hydraulic pressure is either pressure too low or too high. out of range DSYM0393
3 Body: The hydraulic fluid
Hydraulic temperature is too temperature high. too high
DSYM0394
4 Body: Not The body is
secured currently not in a secure state for DSYM0349 driving. 5 Body: This not applicable Footboard for garbage in use preparation. The DSYM0349 footboard is in use by a person, indication for the driver to take extra care when driving. 6 Body: The body is Unable to currently unable to activate become operational DSYM0349 because one or more of the enabling conditions are not satisfied. 7 Body: The additional axle Additional overload is axle activated by load overloaded DSYM0395 monitoring on the additional axle The axle load monitor (ALM) on the factory axles are not monitored by this function. 8 Body: The body has Height disabled the height levelling levelling function of disabled DSYM0396 the air suspension for stability, and applies to both “ECAS on bump” and “ECAS freeze”. 9 Body: PTO The body is using a via transfer PTO with the drive case line disengaged DSYM0398 using a transfer case. 10 Body: The body is Active currently in operation. DSYM0349
11 Body: The Body Not
Cargo not Secured indicates secured that for example, the bay doors of a DSYM0349 tipper are not closed or the netting of a loader are not properly attached for driving. 12 Body: The Body Not Crane not Secured indicates secured that the crane is not DSYM0399 properly immobilised for driving. 13 Body: The Body Not Support Secured indicates legs not that the support secured DSYM0400 legs are not properly immobilised for driving. 14 Body: The support legs Support are out and the legs out driver must not try DSYM0401 to drive. 15 Body: Lift The Body Not beam not Secured message secured and indicates that DSYM0402 the lift beam is not properly immobilised for driving. 16 Body: Tail The tail lift is not lift open properly closed for driving. DSYM0403
17 Body: The tipper is not
Tipper not properly secured immobilised for DSYM0404 driving. 18 <no text is Driven front axle displayed (GINAF). with this telltale> DSYM0405