‘Technical Specifications
‘MIF 407 Rack and Pinton System
With 5” wide gear raclo
‘The following specifications are applicable to the MIF fabricated seven tooth pinion jacking system driven
bby a Braden Cargo Gearmatic LB400A gearbox. The rack and pinion system inchiding support bearings
and housings has been ABS approved since 1992 using a 480,000 in-Ibs. Gearbox at (65.75-Tons Static
Load and 87.67-Ton Combined Load.) The Braden LIB400A gearbox carsies ABS and USCG approval at
480,000 in-bs. Torque. ABS certification of individual boxes is avaitable upon request.
‘Rack and Pinfon Parameters
Pitch Diameter 7.00 inches
Number of Teeth Seven
Pressure Angle 25 Degrees
Face Width 6.50 inches
Material (One Piece Pinion Shaft) BAO
‘Shaft Diameter 4 inches
‘Surface Hardness 36 RC Minium
Core Hardness 33 RC Minimum
Yield Strength 140 KSI
Tensile Strength 160 KSI
ABS Allowable Jacking 65.75 Tons
ABS Allowable Holding, 87.67 Tons
‘Rack Material ASTM AS14-S"wide
Rack Yield Strength 90 KSI
LBAODA Torque @ Quoted Rating. 480,000 in-Ibs.
Maximuti Suggested Jacking Speed 6.00 FT/MIN
Rote inp t Maximum Speed 201P
Available Gear Ratios {56:1