Professional Documents
Culture Documents
65E
Agricultural Tractor
2
Customer Support/Serviceability
Your Cat dealer provides in-field
service by ag tractor technicians with a
“shop on wheels,” plus industry-leading
parts availability and preventive
maintenance programs. Combined with
easy access to daily service points and
no undercarriage lubrication or
maintenance, the Challenger 65E is
designed for minimal servicing with
maximized uptime. pg. 10
✔ New feature
3
Mobil-trac System
Caterpillar designed and manufactured components stand up to tough applications.
Multi-axle belted system means decreased compaction and small turning radius.
The Caterpillar tracked-tractor was Four belt types and three belt widths Two drive-wheel options help further
initially designed and produced to meet match the best belt to the application: increase application flexibility:
the needs of the agricultural market back ■ Standard belts are for typical tillable ■ Standard 60° Chevron Driver features
in 1906. That commitment was further land and are available in 25" efficient mud and debris purging and
demonstrated with the development of (635 mm), 30" (762 mm) and 35" harder rubber compounds for
the Challenger tractor's rubber-belted (889 mm) widths. excellent performance in most
track system more than 70 years later. ■ Special Application (S/A) belts applications.
extend life in high drawbar load ■ Special Application Drive Wheel
Caterpillar’s Mobil-trac system
applications and roading. S/A belts (shown above) features tapered drive
provides excellent traction and flotation
come in 25" (635 mm), 30" slots between drive elements that
plus reduced compaction. The rubber
(762 mm) and 35" (889 mm) widths. allow mud and debris to extrude
belt and grousers allow convenient on- ■ Steep Side-Hill belts have additional through the wheel, eliminating belt-
road travel.
guide blocks to improve retention on to-driver slippage in most sloppy or
The undercarriage and belts are steep side-hill tillage applications and muddy underfoot conditions.
Caterpillar designed and manufactured come in 30" (762 mm) width only.
to ensure quality, reliability and ■ Standard Lug, Inside Protected belt is
4
1 Typical 4WD with triples
2
Challenger 65
Contact
Area
Contact
Area B
A
C
A — Four-wheel-drive tractor compaction curve
Contact B — Challenger tractor compaction curve
Area C — Maximum compaction
Innovative Cat 3176C diesel engine Caterpillar state-of-the-art Four valves per cylinder for superior
delivers large-engine performance from electronically controlled, computer- heat rejection. Valve area equals that of
a compact engine design. The six- actuated unit injection fuel system has an engine with a 40% larger
cylinder 310 horsepower (231 kW) high injection pressure for complete fuel displacement. Valves and unit injection
engine is turbocharged and air-to-air combustion, more efficient fuel use and system are camshaft-actuated for
aftercooled. With high horsepower and reduced emissions. The 25,500 psi precision timing.
low displacement, this engine provides (175 695 kPa) high-compression-ratio Blocks and heads are Caterpillar
excellent fuel economy and durability system provides dependable cold- designed, cast and machined to meet
that can significantly reduce operating starting performance. The dual-filter Caterpillar quality standards.
costs. system reduces component wear.
Extended Life Coolant/Antifreeze offers
Superior lugging performance. High Two-piece articulated pistons with better protection over a longer period of
torque output and a maximum torque forged steel tops withstand higher time, lowers operating costs, requires
rise of 30% makes the 3176C very cylinder pressures. less maintenance and is environmentally
responsive. Its superior lugging
Dual cooling jets keep ring temperatures responsible and recyclable.
capability pulls through sudden, short-
low for long ring and liner life with
term increases in loads, reducing the Larger fuel tank allows up to 20 hours
excellent oil control.
need to downshift while maintaining of continuous field work at maximum
consistent, desirable working speeds to power.
get the work done faster.
6
The Challenger 65E tractor features a Single-lever, in-line transmission The Challenger tractor hydraulic
standard full powershift direct drive control provides the ability to shift up system features:
transmission designed and built by or down, to or from any gear without ■ 40 gpm (151 lpm) flow capacity for
7
Cab
Outstanding comfort, convenience and control contribute to greater productivity.
7
9
10
5
4
1
11
8
Advanced design provides unmatched 5 Improved governor control is now 10 Wet-arm windshield washers and
control, comfort and visibility, along electronic for even more precise wipers are standard on both front and
with easy access to important operating control. rear windows.
information, all designed to make your
6 Performance Monitor (optional) 11 Additional monitor attachment
days in the fields more productive.
displays engine rpm and hours, locations and power plugs and
Enhanced all-around view. Air and power take-off (PTO) rpm, machine conveniently located access panel
muffler stacks are positioned in line ground speed, percent ground slip, improve flexibility when working
with cab corner post for an unobstructed area covered per hour, and total area with a variety of implements.
front view. Large glass area provides covered by the tractor and
outstanding forward and rear visibility implement.
from the operator's seat to the
7 Impressive sound system (optional)
implement or road. Tinted safety glass
(see your Cat dealer for details)
minimizes glare for safe operation.
includes four 13-watt speakers, a
Ergonomics. The E-Series tractors have two-channel 44-watt amplifier with
a more efficient use of space and two 22-watt subwoofers, and a
brighter, quieter cabs for added pre-amp with AM/FM radio and
productivity and visibility. Comfort cassette player. Six-CD changer also
improvements have been made available.
throughout.
8 Transmission access available
Pressurized, air-conditioned cab through convenient floor hatch. Two-
minimizes dust and enhances operator piece mat allows access without
comfort. removing the seats. Easy-to-clean
floor mats improve the operator
Extended roof overhang provides
environment.
additional sun shading for heat and
glare reduction. 9 Challenger Tractor Information
Display (Cat ID) (optional) provides 3 2
1 Resiliently mounted eight-way
machine state information, last field
adjustable air-ride suspension seat
totals, current field totals, daily
for a comfortable ride with an
totals, lifetime totals, and
excellent view of the work
maintenance information for a
environment. Seat swivels for
variety of engine, fuel and
increased comfort while watching
performance measurements via an
implements. Includes fully retractable
easy-to-read vacuum-fluorescent
seatbelt.
display.
2 Trainer seat, a Caterpillar exclusive,
allows an extra person to comfortably
ride along for training and
demonstration purposes. Includes
fully retractable seatbelt and large
storage compartment.
3 Redesigned parking brake handle is
relocated for better access and ease of
operation.
4 New control layout features
repositioned hydraulic levers for
easier multi-application use. Rocker
switches throughout the cab are
back-lit for easier viewing.
9
Complete Customer Support
When you buy a Cat machine, you also get Caterpillar’s total commitment
to customer support.
In-field service by Cat dealer ag tractor technicians from a
“shop on wheels” means fast service, when and where you
need it.
Machine management services. Cat dealers help manage
your tractor investment with:
■ Effective preventive maintenance programs.
Technical Analysis.
■ Information to make the most cost-effective repair option
decisions.
Parts availability. Most Cat parts are immediately available.
Cat dealers can depend on our worldwide computer network
to find parts not in their inventory to minimize downtime.
Selected components are economically available as
Caterpillar Remanufactured Products.
Flexible financing. Talk to your Cat dealer to arrange
affordable financing and learn how terms can be structured
to meet your cash flow requirements.
Serviceability
Simplified service means more productive time in the fields.
10
Engine Transmission
Four-stroke cycle, in-line six cylinder 3176C turbocharged air-to-air 10-speed forward, two-speed reverse
aftercooled (ATAAC) diesel engine. direct drive powershift.
77°F (25°C) and 29.32 in Hg (99 kPa) ■ pressure lubricated with full-flow
2 4.5 7.3
dry barometer filtered and cooled oil At 2300 engine rpm maximum travel
■ used 35° API gravity fuel having an ■ dry-type air cleaner with primary and
speed is 19.7 mph (31.7 km/h).
LHV of 18,390 Btu/lb (42 780 kJ/kg) secondary elements
when used at 86°F (30°C) [ref. fuel ■ direct-electric 12-volt starting and
Features
density of 7.001 lb/U.S. gal charging system with two 12-volt, ■ designed and built for tillage and
Mobil-trac System
Combines mobility and speed characteristics of rubber tires with the efficiency and high performance of tracks.
Features
■ three belt sizes
tensioning system
Transmission 15 57 ■ steering control starts hydraulic flow steering unit to drive wheels
Differential and from pump to motor when steering ■ 5.08:1 reduction greatly increases
final drives 57 216 wheel is turned torque for heavy drawbar applications
■ steering motor drives steering
Crankcase 8 30
differential
Cooling system 15 57 ■ smooth, even, full-power turns
Hydraulic tank 18 68 ■ optional high-torque steering motor
industry
Weight (approximate)
Cab
Caterpillar cab, Rollover Protective Structure (ROPS), and
Falling Object Protective Structure (FOPS) are standard.
ROPS complies with SAE J395, SAE Features ■ suspended inching pedal and brake
J1040 APR88, 86/295/EEC and ■ air-ride suspension seat provides pedal
ISO 3471-1986. maximum comfort ■ deceleration pedal
■ seat is eight-way adjustable ■ electronic governor control
FOPS complies with SAE 1043 SEP87
— fore/aft position ■ training seat with seatbelt
and ISO 3449-1984.
— swivel (28° left/35° right) ■ in-line transmission shifter
Cab meets OSHA and MSHA limits for — backrest angle ■ electrical outlets for auxiliary
operator sound exposure with doors — horizontal isolation monitors and other electrical
closed according to ANSI/SAE J1166 — damper adjustment equipment
JUL87. — operator height/weight ■ rear-access grommet for routing
— lumbar support cables into cab
Note: When properly installed and
— armrest position ■ wet-arm windshield washers and
maintained, the cab offered by ■ seatbelt wipers, front and rear
Caterpillar, when tested with doors ■ four-position implement hydraulic ■ thicker, softer seat cushions
closed according to ANSI/SAE J1166
controls with auto kickouts and float ■ two-piece floor mat
MAY 90, meets OSHA and MSHA
lockout, and in-cab flow control for all ■ electronic three-point hitch control
requirements for sound exposure limits
four circuits positioned close together (optional)
in effect at time of manufacture.
and at a 60° angle to the operator ■ stereo system — high performance
■ tilt and telescoping steering wheel sound system (optional)
■ PTO controls (optional)
fender
■ Scheduled Oil Sampling (S•O•S)
ports standard
Hydraulic Controls Three-point Hitch
Closed-center, pressure-compensated, Optional. Lift capacity per
load-sensing implement system. ASAE S349-1, fully raised:
13,194 lb (5985 kg).
Power Take-off
Output at 2100 rpm is 40 gpm Features Optional PTO provides maximum
■ accepts implements conforming to
(151 liters/min). Operating pressure is flexibility to match wide variety of
2900 psi (19 981 kPa). SAE-ASAE Category III and PTO-driven equipment.
Category IV Narrow
Features ■ electro-hydraulically controlled for
■ four-position implement hydraulic Features
smooth, easy and precise control with
controls with auto kickouts and float ■ 1.75" (44.4 mm) 20-spline shaft
standard position and draft control
lockout ■ easily visible from operator's
■ 1000 rpm at 2050 engine rpm
■ flow control adjustment for all four ■ shaft located at rear of tractor
compartment
circuits inside the cab
■ Caterpillar’s XT hose
Factory installed lb kg lb kg
Belts Hitch ready, AEM three-point hitch and scraper 50 23
30" (762 mm) standard lug 420 191 Power take-off, 1000 rpm,
30" (762 mm) standard lug, reinforced 560 254 1.75" (44.4 mm) diameter, 20-spline 600 272
35" (889 mm) standard lug 932 423 Radiator, multi-row 126 57
25" (635 mm) heavy-duty lug -24 -11 Special Application Drive Wheel 965 437
30" (762 mm) heavy-duty lug 382 173 Steering, high torque — —
35" (889 mm) heavy-duty lug 880 399 Three-point hitch with draft control 1800 816
30" (762 mm) steep side-hill 440 200
Field installed
Corrosion protection — —
Auxiliary engine drive
Counterweight
Cat ID
Front with bracket
(20 suitcase-style weights) 2172 985.2 Cooling, high ambient
Front with bracket Display electronic
(10 suitcase-style weights) 1166 529 Horn, dual, forward
Front bracket only 146 66 Kit, three-point hitch with draft control
Mid-beam weights, two 365 166 Kit, PTO
Rear counterweight, 1184 537 Player kit, CD changer
includes 13 rear weights, Radio kit, basic
two support blocks Radio kit, with CD changer controls
Deluxe cab Subwoofer with amplifier
Halogen lamps, additional, 9 4 Sunvisor, cab, front
two front, two rear Switch, implement status
Performance monitor, programmable 15 7
Subwoofer and amplifier 14 7
Sunvisor 8 4
Dimensions
(approximate)
9' 4"
2848 mm
5' 0"
1528 mm
3"
63.5 mm
1' 2"
378 mm 7' 6" 1' 3" 2' 10" 8' 11"
2286 mm 381 mm 882 mm 2721 mm
19' 6"
10' 0" 5945 mm
3048 mm 21' 0"
(30" Belts) 6413 mm
19' 8"
6005 mm
21' 2"
6459 mm
www.CAT.com
© 1998 Caterpillar
Printed in U.S.A.
AEHQ5283-02 (2-98) Materials and specifications are subject to change without notice.
Replaces AEHQ5283-01 Featured machines in photos may include additional equipment.
See your Caterpillar dealer for available options.