Professional Documents
Culture Documents
CAT pvt117 PV Module
CAT pvt117 PV Module
Photovoltaic
Features
Proven Energy Yield Advantage Advanced Performance and Reliability
• 17.0% maximum efficiency • Compatible with advanced 1500V plant
• -0/+5W positive power tolerance architectures.
• Generates more energy than conventional • Independently tested to pass accelerated life
crystalline silicon solar. and stress tests beyond industry standards
• Higher yield when compared to typical c-SI • Highly predictable energy in all climates and
modules, resulting in more installed capacity applications
per square meter. • Independently certified for reliable performance
• Superior temperature coefficient, better spectral in high temperature, high humidity, extreme
response in humid conditions and better desert and coastal environments
shading response means more specific annual
energy yield than c-SI modules.
STC
Operating Temperatures Chennai, India
CdTe Relative Energy Gain Over c-Sl
100
4.0%
Power at STC (%)
95 Dubai, UAE
More Energy for Same 3.0%
90 Durban, South Africa
Nameplate Watts
Atlanta, USA
85 2.0%
Linear (Cat Thin Film) Frankfurt, Germany
80
Linear (Silicon Crystalline) 1.0%
75
20 30 40 50 60 70
0.0%
Module Temperature (°C)
-1.0%
-2.0%
0 10 20 30 40 50 60 70 80 90
LEHE1283-01 Page 1 of 2
Microgrid
Photovoltaic
Technical Data
Mechanical Description Module Rating at Standard Test Conditions (STC)
1000 W/m2, AM 1.5, 25°C
Length 1200 mm (47.2 in)
Nominal Values PVT117
Width 600 mm (23.6 in)
Nominal Power (-0/+5 W) PMPP (W) 117.5
Thickness 6.8 mm (0.27 in)
Voltage at PMAX VMPP (V) 70.1
Weight 12 kg (26.5 lbs)
Current at PMAX IMPP (A) 1.68
Area 0.72 m2
Open Circuit Voltage VOC (V) 88.1
Leadwire 2.5 mm2, 610 mm
Short Circuit Current ISC (A) 1.83
488-1778 (female) / 488-1779 (male)
Connectors Module Efficiency % 16.3
(Multi-contact MC4)
Maximum System Voltage VSYS (V) 15001
Bypass Diode None
Limiting Reversing Current IR (A) 4.0
Thin-film CdTe semiconductor,
Cell Type
up to 216 cells Maximum Series Fuse ICF (A) 4.0
Frame Material None Rating at Nominal Operating
Cell Temperature of 45°C
Front Glass 3.2 mm heat strengthened 800 W/m2, 20°C Air Temperature, AM 1.5, 1 m/w Wind Speed
Back Glass 3.2 mm tempered Nominal Power PMPP (W) 89.0
Encapsulation Laminate material with edge seal Voltage at PMAX VMPP (V) 65.9
Load Rating 2400 Pa Current at PMAX IMPP (A) 1.35
Open Circuit Voltage VOC (V) 83.2
MECHANICAL DRAWING
Short Circuit Current ISC (A) 1.5
Temperature Characteristics
Module Operating Range (°C) -40 to +85
Coefficient of PMPP TK (PMPP) -0.28%/°C
Coefficient of VOC TK (VOC) -0.28%/°C
Coefficient of ISC TK (ISC) +0.04%/°C
1. Application Class A for 1000V (class II), Application Class B for 1500V (class 0)
with MC4; Application Class A for 1000V and 1500V (class II) with MC4-EVO 2
Flame) 94%
92%
• CSI Eligible (CA-USA), FSEC (FL-USA), MCS 90%
88%
(UK), CEC Listed (Australia), SII (Israel), 86%
InMetro (Brazil) 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
Years
Manufacturing Sources
www.cat.com/electricpower
• U.S., Malaysia, or Vietnam Sourced ©2018 Caterpillar
All rights reserved.
Materials and specifications are subject to change without notice.
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow”, the “Power
Edge” trade dress as well as corporate and product identity used herein, are
LEHE1283-01 (11/18) trademarks of Caterpillar and may not be used without permission.