Professional Documents
Culture Documents
Belzona 1212
Belzona 1212
1000 SERIES
KEY BENEFITS
EXCELLENT ADHESION
Belzona 1212 exhibits high adhesive strength
to non-grit blasted contaminated substrates.
SURFACE TOLERANT
Belzona 1212 can be applied directly onto
manually prepared, wet or oil-contaminated
surfaces as well as underwater.
RAPID CURE
Belzona 1212 cures rapidly after mixing of the
two components. It also cures extremely well
APPLICATION AREAS
at temperatures as low as 5°C (41°F).
• Plate bonding, corrosion pit filling and localised repair HIGH MECHANICAL STRENGTH
of wet, sweating or oil contaminated pipes where grit When fully cured, Belzona 1212 demonstrates
blasting cannot be achieved excellent mechanical properties, resulting in
excellent durability and longevity in service.
• In-situ sealing of oil and fluid leaks on storage tanks,
engines, gearboxes, transformers and sumps
• Long-term repair of offshore structures and marine SIMPLE TO USE
vessels, including ship hulls, rudders, propellers and Belzona 1212 has a simple 1:1 volume mix
ballast tanks, without taking the equipment out of service ratio, making it very simple to use and apply
with minimal training and simple tools.
• Underwater repairs including use in splash zones and
coastal structures
www.belzona.com
1212
1000 SERIES
35 30
Oils
30
Water 25
Dolly Pull Off Adhesion
25
20 20
28.3 MPa
30.5 MPa
28.3 MPa
24.7 MPa
15
22.5 MPa
15
18.4 MPa
10 17.2 MPa
13.0 MPa
10 40°C cure
5 20°C cure
10°C cure
0 5
Fully Synthetic
Transformer
Underwater
Crude Oil
Hydraulic
Gearbox
Motor Oil
Diesel
Wet
Oil
Oil
Oil
0
0 2 4 6 8 10 12 14 16 18 20 22 24
Cure Time (hours)
• Belzona 1212 demonstrates excellent adhesion • Following a 90 minute cure at 20°C (68°F), a one inch
to contaminated mild steel surfaces prepared to square bracket bonded with Belzona 1212 will be able to
SSPC-SP11/ISO 8501-1 St3. support a tensile load of greater than 200kg (440lbs).
• After a 4 hour cure at 20°C (68°F), the same bracket
will be able to support a load of greater than 1000kg
(2200lbs).
ISO 9001:2008
Q 09335 Belzona products are manufactured
ISO 14001:2004 under an ISO 9000 Registered
EMS 509612 Quality Management System