Professional Documents
Culture Documents
LRB 2504.05
Concept and characteristics
LRB 355
Attachment
with quick connection Parallel kinematics
The robust universal machine for a wide variety of The solid undercarriage offers excellent stability and low
applications: ground bearing pressure.
s¬Full displacement drilling The uppercarriage with its small swing radius enables
operation in restricted space.
s¬Continuous flight auger drilling
s¬Double rotary drilling Parallel kinematics with a large working area allows to fold
the leader back.
s¬Kelly drilling
All winches are mounted on the leader for low centre of
s¬Soil mixing
gravity and easy operation.
s¬Vibrator slim design
The rigid leader absorbs high torque and is fitted with a
s¬Ring vibrator rope crowd system for high pull forces.
s¬Hydraulic hammer
The quick change system allows for rapid mounting or
s¬Cutter Soil Mixing (CSM) changing of attachment.
Leader 89.2 ft
Elevating
working platform
The powerful Liebherr diesel engine is low in emission and The PDE process data recording system creates the basis
economical through SCR technology. for a complete documentation of the working processes
carried out. Using the PDR evaluation software this
The optional Eco-Silent-Mode reduces fuel consumption documentation is given the desired form.
and noise emission.
Sophisticated solutions provide safe operation and main-
The Litronic control with assistance systems supports the tenance of the machine:
operator:
s¬Cab design for optimum visibility
s¬Joystick control for all machine functions s¬Acoustic and optic warnings
s¬Leader inclination memory s¬Rear and side view cameras etc.
s¬Centrifugal governor for vibrator
s¬Cruise Control for the drilling process etc.
7° 7° 7°
7° 7° 7°
45°
45°
107.9´
77.2´
91.5´
60.8´
39.2´´
39.2´´
0-10.5´
0-10.5´
49.4´´ 49.4´´
R1 R1
5´5 5´5
19´4´´ ´´ ´´
19´4´´
LRB 355 with standard undercarriage LRB 355 with standard undercarriage and optional equipment
Operating weight LRB 355 Operating weight LRB 355 with optional equipment
Total weight with 35.4 inch 3–web shoes 207,235 lbs Total weight with 35.4 inch 3–web shoes 210,100 lbs
The operating weight includes the basic machine LRB 355 (ready for The operating weight includes the basic machine LRB 355 (ready for
operation*) and 3x 13,230 lbs counterweight, without attachment. operation*) and 3x 13,230 lbs counterweight, without attachment.
Additional weights LRB 355 Additional weights LRB 355 with optional equipment
Main winch 56,200 lbf with leader top 10,580 lbs Main winch 56,200 lbf with leader top 10,580 lbs
Elevating working platform 1,985 lbs Elevating working platform 2,205 lbs
Adapter for casing oscillator 2,645 lbs Adapter for casing oscillator 2,645 lbs
Hydraulic leader foot 1,764 lbs Hydraulic leader foot 1,764 lbs
Concrete supply line 1,764 lbs Concrete supply line 1,764 lbs
45°
108.3´
77.2´
39.2´´
0-10.9´
53.9´´
10´10´´ 39.4´´
14´9´´ 15´5´´
12.2´´
16´11´´
R1
5´5
20´11´´ ´´
66´3´´ 11´5´´
12´6´´
15.7´´
47.4´´
35.4´´
23´1´´ 19´4´´ 23´10´´ 11´6´´
Transport standard LRB 355 with 72.8 ft leader Dimensions and weights
includes the basic machine (ready for operation*) with leader, without Length 66.2 ft
attachment (such as rotary, vibrator, hammer etc.) and
without counterweight. Weight complete without counterweight 167,550 lbs
74´5´´ 11´5´´
12´6´´
15.7´´
47.4´´
35.4´´
23´1´´ 19´4´´ 32´ 11´6´´
Transport standard LRB 355 with 89.2 ft leader Dimensions and weights
includes the basic machine (ready for operation*) with leader, without Length 74.4 ft
attachment (such as rotary, vibrator, hammer etc.) and
without counterweight. Weight complete without counterweight 170,420 lbs
29´3´´ 11´5´´
49´´
15.7´´
12´6´´
19´4´´ 35.4´´
23´5´´ 11´6´´
74´5´´ 11´5´´
12´10´´
15.7´´
49.4´´
39.4´´
22´2´´ 20´11´´ 31´4´´ 11´10´´
Transport standard LRB 355 with 89.2 ft leader Dimensions and weights
includes the basic machine (ready for operation*) with leader, without Length 74.4 ft
attachment (such as rotary, vibrator, hammer etc.) and
without counterweight. Weight complete without counterweight 190,700 lbs
74´5´´ 11´5´´
11´9´´
36.8´´
10´ 35.2´´
25´ 15´3´´ 34´2´´ 11´11´´
Transport standard LRB 355 with 89.2 ft leader Dimensions and weights
includes the basic machine (ready for operation*) with leader, without Length 74.4 ft
attachment (such as rotary, vibrator, hammer etc.), without crawlers
and without counterweight. Weight complete without counterweight 148,600 lbs
12´10´´
11´9´´
15.7´´
35.2´´
20´11´´ 39.4´´
24´3´´ 11´10´´ 15´3´´ 11´11´´
8´6´´
8´3´´
8´5´´
11´4´´ 11´5´´ 4´6´´
15´9´´ 7´4´´ 13´2´´ 5´10´´ 7´ 5´10´´
Double rotary drive DBA 300 Vibrator slim design 1500 H Rotary (standard)
Transport weight Transport weight Transport weight
DBA 300 26,000 lbs 1500 H 19,620 lbs BAT 450 20,065 lbs
15.7´´
15.7´´
6´5´´
14.2´´
15´4´´ 3´7´´
11´5´´ 33.7´´ 16´5´´ 4´2´´
11´5´´ 33.7´´
66´3´´(*74´5´´) 11´2´´
9´5´´
Engine Control
Engine type Liebherr D 9512 A7-04 The control system – developed and manufactured by Liebherr – is
Power rating according to ISO 9249 600 kW (805 hp) at 1700 rpm or designed to withstand extreme temperatures and the many heavy–
750 kW (1006 hp) at 1700 rpm duty construction tasks for which this machine has been designed.
Fuel tank 343 gal capacity with continuous level Complete machine operating data are displayed on a high resolution
indicator and reserve warning monitor screen. A GSM/GPRS telematics module allows for remote
Engine complies with 97/68 EC or NRMM exhaust certification inquiry of machine data and operational conditions. To ensure clarity of
EPA/CARB Tier 4f. the information on display, different levels of data are shown in enlarged
The reduced engine speed results in increased fuel efficiency, less noise lettering and symbols.
emission and longer service life of the engine. Control and monitoring of the sensors are also handled by this high
The optional Eco-Silent Mode can be used when the working process technology system. Error indications are automatically displayed on the
does not require the full engine power. This function further reduces the monitor in clear text. The machine is equipped with proportional control
engine speed so allowing the machine to operate even more silently and for all movements, which can be carried out simultaneously.
with enhanced fuel efficiency. The optional Engine Auto-Stop prevents Two joysticks are required for operation. Pedal control can be changed
long idle times after the operator has left the cabin and thus avoids to hand control.
unnecessary fuel consumption and emissions. As an option a diesel Option:
particulate filter is available (for 97/68 EC engines only). PDE®: Process data recording
Option:
Undercarriage with detachable crawlers Noise emission
Drive speed 0 – 1.15 mph
Track force 183,000 lbf Noise emissions correspond with 2000/14/EC directive.
Width of 3-web grousers (option 35.4 inch) 39.4 inch Guaranteed sound pressure level LPA in the cabin 71.8 dB(A)
2 2
13 :53
1.28 m/min
bar
II
I
-15.94m
120.6 kN
25 10 5 4 3 2 1 0 0.0 °
2.47 m³ 20.8 kN
bar AUX KELLY
400 300 200 100 0
1 3.2 100 500
200 kN
80 400
60 300
-0.1°
bar rpm % Nm
40 200 400 2200 100
300 1900 80
% 20 100 1600 60
40 30 20 10 0 -10 200
1300 40
0 0 100 1000 20
235.1 kN
0 700 0
1.28 m/min
-15.94 m
400mm/U
MODE
3 2
2 11 :18
1.73 m/min
bar
15.34 m
194.7 kN
5 2 1 0
0.0 °
1.44m³
bar KELLY
600
400 300 200 100 0
1 3.1
200 kN
400
0.1 °
bar rpm % Nm
400 2200 100
200
300 1900 80
%
1600 60
40 30 20 10 0 -10 200
1300 40
0 100 1000 20
376.3 kN
0 700 0
1.73 m/min
15.34 m
MODE
Technical data Performance data for 72.8 ft leader and auger cleaner
Rotary drive - torque 0 – 331,905 lbf-ft Drilling depth 64.3 ft
Drilling depth with 32.8 ft Kelly extension 97.1 ft
Rotary drive - speed 0 – 40 rpm
Max. pull force (crowd winch and Kelly winch) 202,330 lbf
*) Other drilling diameters available on request
Max. drilling diameter* 47.2 inch
3 2
11 :30
3.27 m/min
bar
-10.80m
-88.4 kN
5 2 1 0
0.29m³ 0.0 °
bar KELLY
400 300 200 100 0 15 600
200 kN
bar 9.7
400 300 200 100 0 400
0.0 °
bar rpm % Nm
400 2200 100
200
300 1900 80
%
1600 60
40 30 20 10 0 -10 200
1300 40
0 100 1000 20
12.0 kN
0 700 0
0.00 m/min
0.00m
MODE
A 3 2
10 :54
1.23 m/min
-5.56 m
-63.9 kN
0.0 °
bar KELLY
300
400 300 200 100 0
2 15
200 kN
200
0.1 °
bar rpm % Nm
400 2200 100
100
300 1900 80
6´3´´ 1600 60
bar 200
1300 40
0 100
400 300 200 100 0 1000 20
188.2 kN
0 700 0
0.00 m/min
-24.25 m
X 83 mm/U -24.3 m
MODE
Other Kelly bars available on request **) Values valid for 72.8 ft leader.
When using a casing oscillator, value X has to be reduced by 5.3 ft. For machines with 89.2 ft leader X + 16.4 ft can be applied.
2 2
17 :10
3.31 m/min
bar
-10.99 m
165.7 kN
25 10 5 4 3 2 1 0 2.44 m³ 0.0 °
MODE
2 2
13:45
3.48 m/min
-18.37 m
-28.4 kN
-1.9 °
MODE
2 2
13:45
3.48 m/min
-18.37 m
-28.4 kN
-1.9 °
MODE
2 2
10 :23
0.00 m/min
-1.12 m
13.0 kN
-1.9°
60 300
2.3°
bar rpm % Nm
40 200 400 2200 100
300 1900 80
20 100 1600 60
200
1300 40
0 0 100 1000 20
20.0 kN
0 700 0
0.00 m/min
-8.40m
MODE
67%
l/m r
0.3 m 0.3 m
0.4 m 0.4 m CompactFlash Standard
0.5 m 0.5 m memory card Optional
0.6 m 0.6 m
0.7 m 0.7 m
0.8 m 0.8 m
0.9 m 0.9 m
1.0 m 1.0 m
PDE®
1.1 m 1.1 m
1.20 m 1.20 m
1.3 m 1.3 m
1.4 m 1.4 m
1.5 m 1.5 m Printer
1.6 m 1.6 m
1.7 m 1.7 m
1.8 m 1.8 m
1.9 m 1.9 m
2.0 m 2.0 m
2.1 m 2.1 m
2.2 m 2.2 m
0 25 50 75 100 125 0 10 20 30
ABC
Depending on the application the recorded and processed data are displayed on the PDE® touchscreen in the operator‘s cab, e.g. in the form of an
online cast-in-place pile.
At the same time the PDE® is operated using this touchscreen. The operator can enter various details (e.g. jobsite name, pile number, etc.) and start
and stop recordings. A recording of every start-stop cycle carried out in the PDE® is established on a CompactFlash memory card.
The PDE® can be configured in a number of ways, e.g. for the connection of external sensors, for the generation of a simple protocol as graphic file
and/or for a printout directly in the operator‘s cab.
Recordings management - The recordings generated by the PDE® system can be imported and managed #&!¬¬$RILLING
in PDR. The data can be imported directly from the CompactFlash card or via the Liebherr telematics system JOB¬SITE
MACHINE¬)$
START¬DATE
MOTORWAY
XX
PILE¬NUMBER %
START¬TIME MAXIMUM¬DEPTH ¬CM
LiDAT. Certain recordings, e.g. for a particular day or jobsite, can be found using filter functions. STOP¬TIME
DURATION
TOTAL¬CONCRETE¬VOL
CONCRETE¬VOLUME¬PILE
OVERCONSUMPTION
MAXIMUM ¬INCLINE
¬M¨
¬M¨
¬
»
Viewing data - The data in each record is displayed tabularly. Combining several recordings provides results,
for example, regarding the total concrete consumption or the average depth. Furthermore, a diagram editor is
available for quick analysis.
Generating reports - A vital element of PDR is the report generator, which allows for the generation of
INDIVIDUALçREPORTSç4HESEçCANçBEçPRINTEDçOUTçDIRECTLYçORçSTOREDçASçPDFçlLESç)NçTHEçPROCESSçTHEçSIZEçCOLOURçLINEç
thickness or even the desired logo can be configured. Moreover, the reports can be displayed in different
languages, e.g. in English and in the national language.