Professional Documents
Culture Documents
1 of 2 11/4/2013 1:41 AM
Configuring an Ad Hoc Mode WLAN with Windows 7 - For Dummies http://www.dummies.com/how-to/content/configuring-an-ad-hoc-mode-wl...
5. In the Set Up an Ad Hoc Network dialog box, provide the following information:
Add a network name for your wireless network.
Indicate the security type as either WEP or No Authentication.
If you chose WEP, provide the security key for the network and optionally select
the Hide Characters box.
Select Save This Network to keep this network for longer than one session.
6. Click Next to continue.
The confirmation dialog is displayed, showing you the information that you need to
provide to other people who will want to connect to your ad hoc network.
7. Click Close.
After the connection is set up, it initially becomes active and remains so until you
connect to another network. If you did not choose to save the connection, it will be
removed from your wireless configuration at that time and you will need to repeat this
process to reactivate an ad hoc network connection.
Copyright © 2013 & Trademark by John Wiley & Sons, Inc. All rights reserved.
2 of 2 11/4/2013 1:41 AM