This document outlines the specifications for a water soluble demulsifier chemical intended for use in the Lakwa oil field in Assam, India. The chemical must be a free-flowing liquid at 20°C and soluble in water to form a clear, homogeneous solution. Laboratory tests will evaluate the chemical's performance at dosages of 120 mg/L at 45°C for demulsification and 60°C for 60 minutes of curing time at the Lakwa GGS-III installation site. The chemical's water content cannot exceed 0.2% by volume.
This document outlines the specifications for a water soluble demulsifier chemical intended for use in the Lakwa oil field in Assam, India. The chemical must be a free-flowing liquid at 20°C and soluble in water to form a clear, homogeneous solution. Laboratory tests will evaluate the chemical's performance at dosages of 120 mg/L at 45°C for demulsification and 60°C for 60 minutes of curing time at the Lakwa GGS-III installation site. The chemical's water content cannot exceed 0.2% by volume.
This document outlines the specifications for a water soluble demulsifier chemical intended for use in the Lakwa oil field in Assam, India. The chemical must be a free-flowing liquid at 20°C and soluble in water to form a clear, homogeneous solution. Laboratory tests will evaluate the chemical's performance at dosages of 120 mg/L at 45°C for demulsification and 60°C for 60 minutes of curing time at the Lakwa GGS-III installation site. The chemical's water content cannot exceed 0.2% by volume.
LAKWA FIELD OF ASSAM ASSET SPECIFICATION No. ONGC / PC / 08 / 2015 (1st Revision 2019) TEST PROCEDURE ONGC/ Test Procedure Vol-IV/ PC/ 08 MATERIAL CODE 100000303
1. Physical state : The material shall be a free flowing
homogeneous liquid at 20°C, free from visible impurities.
2. Solubility of 5% (v/v) of the : Solution should be clear and homogenous