Professional Documents
Culture Documents
DISSALATORI - WATERMAKERS
GENERAL CATALOGUE
Residential
Motor homes
Ribs
Sailing yachts
Motor yacht 30 - 55 ft
Cruise ships
Ships
Oil rigs
Resorts
Swimming pool
CORPORATE
Since 1995 HP HIGH PRESSURE SRL has been producing, on a 2500 square meter productive area based in south
of Milan (Italy) a wide range of manual semi-automatic and fully automatic reverse osmosis watermakers, from 35
up to 3000lt/h in the standard series available with DC 12/24V tension supply or AC in all the standard voltages, for
any kind of use, the battery system for sailboats and the professional system for Yachts and Mega-Yacht.
HP HIGH PRESSURE SRL is ISO 9001 certificated (EQA – UKAS) and designs by AUTODESK INVENTOR on the
3D format all the watermakers produced in its facility, taking care of all the details and manufacturing the 80% of the
machines components in house. To face all the more exigent quality standards, each of the watermakers produced
is tested accurately before the shipment.
HP HIGH PRESSURE SRL, have excelled in the watermaker reverses osmosis market, introducing new and very
important effective automation-systems and advance technical solutions, that render the machines fully automatic.
All the plants of the HP’s production can be equipped with the membranes automatic washing system (HP VAL –
HP patent 1997), that is a hydraulic valve that automatically exchanges the water inlet from the sea water side to
the fresh water one, in order to change from the desalination system to the membrane washing system and vice
versa; The automatic pressure regulation system (HP RP TRONIC – HP patent 2002), is a motorized needle valve,
that avoids to operate the regulator by hands at every watermaker start, but that automatically regulates the system
working pressure at a precise set value, with any kind of salinity and temperature of the sea water.
The membrane automatic conservation system (HP AMCS), doses a quantity of biocide liquid in the osmosis
membranes, during their flushing at every machine stop, avoiding the bacteria proliferation at the end of every
desalination cycle. The AMCS can also be used for the winter conservation of the osmotic modules, just increasing
the dosing percentage of the quantity of biocide on the dosing pump. The thermal energy recovery system of the
electrics motors (HP TERS – Patent HP 2002), cooling the electric motors with the sea water feeding the system,
pre-heats the seawater incoming on the membrane, rendering the membranes more productive at the same salinity
and pressure level. In the last years the on board electronics made wide steps on. All the automatic-series systems
can be easily used even in the manual system, even in case one of the machine components failed. HP waterma-
kers are equipped with the best electronics available on the market.
Therefore from January 2007 all the RP TRONIC HP plants will be able to communicate with all the monitoring
systems on board by adopting a MODBUS protocol, programmed in the HP LOGIC. So finally the watermakers
will be integrated to the computerized management systems of the boats. HP DEMI 5, newest portable softening
system, which allows to clean the boats with no spots on windows and hulls and HP DEMI DOUBLE are available
since 2008. In 2011 HP WATERMAKERS renovates the HP SC serie, introducing the newest models HP SC330
(330 lt/h) and HP SC440 (440 lt/h), which in the same overall dimensions, able to produce higher capacities of water
thanks to the 3.15 X 40 exclusive membranes and axial pistons pumps, which are granting an extraordinary produc-
tivity. All the HP plants are covered by a 3 years warranty on the functioning and on the corrosion for each single
item assembled in the machine. The warranty is valid at our retailers and technical assistance network around the
world.
HP's PATENTS AND NEW FEATURES
AUTOMATIC WASHING SYSTEM (1997)
The first HP’s patent. The invention of this hydraulic device finally gives the possibility to avoid a manual action on
the exchange valves, for the flushing cycle. This is actually used on all the plants of the automaticseries.
set2010 set2011
ISSN 1825-6155 - Bimestrale - Anno VII - Poste Italiane Spa - Spedizione in abbonamento postale - D.L. 353/2003 (conv. in L. 27/02/2004 n. 46) art. 1, comma 1, DCB Milano
4
TECNOLOGIE NAUTICHE, MOTORI E ACCESSORI
settembre 2010
www.demi5.com
Demi 5 is the portable system which integrates a softener with a manual control valve to easily operate
softening, rinse and regeneration stages, HS-EasyBRINE a disposable brine cartridge for the easiest
resin regeneration, CB a carbon block pre-filter, so that the appliance can perform filtration at 5 micron,
for crystal clear water, dechlorination, get rid from bad tastes and odours, pesticides, insecticides, Volatile
Organic Compounds (VOC). Demi Double is a softening system with automatic regeneration stage. Both
systems are designed for softening, for a complete or partial removal of the Total Hardness and prevent
from scales and calcareous encrustations. DEMI5 and DEMI DOUBLE can be used for the cleaning of all
the surfaces with an extraordinary NO SPOTS effect. After having used the softeners the surface dry is not
necessary. These systems protect from impurities, corrosion, and limestone deposits, all the pipes, boost
pumps, boilers, showers, faucests and ice makers.
Model PRICE
HP Demi 5 990
HP Demi Double 2.750
CB 5 µ 26
HS Easy Brine 10,80
Kit Easy Test 5 pz 5
RETAIL PRICE LIST VAT EXCLUDED
Flow rates are calculated for sea waters with the following characteristics: 35000 ppm a 25°C at 60 bar
• AISI 316 PUMP BASE AND FILTER SUPPORTS • MANUAL PRESSURE REGULATION SYSTEM
• BRASS HIGH PRESSURE PUMP • AISI 316 HIGH PRESSURE FITTINGS
• AISI 316 BOOST PUMP • ELECTRIC SWITCHBOARD
• OSMOTIC MEMBRANES 2540 • GAUGE METER
• AISI 316 PRESSURE VESSEL 2540 • MANUAL WASHING SYSTEM
Flow rates are calculated for sea waters with the following characteristics: 35000 ppm a 25°C at 60 bar
Flow rates are calculated for sea waters with the following characteristics: 35000 ppm a 25°C at 60 bar
Flow rates are calculated for sea waters with the following characteristics: 35000 ppm a 25°C at 60 bar
MODEL SCD 260/2 SCD 260 SCD 400 SCD 470 SCD 540/4 SCD 540 SCD 660/6 SCD 880/8
Flow rate Lt/h 260 260 400 470 540 540 660 880
Nominal flow rate Lt/h 332 332 498 581 664 664 840 1120
Daily flow rate Lt/day 6240 6240 9600 11280 12960 12960 15840 21120
Nominal flow rate Lt/day 7968 7968 11952 13944 15936 15936 20160 26880
Installed Power kW 2x2.2 2x2.2 2x2.2 2x2.2 2x2.2 2x2.2 2x3 2x3
Total Weight Kg 139 177 202 215 153 215 175 197
Overall dimension mm 1100X 1100X 1100X 1100X 1100X 1100X 1100X 1100X
LxHxD 520X600 550X600 640X600 640X600 520X600 640X600 640X600 640X600
CONNECTION SCD 260/2 SCD 260 SCD 400 SCD 470 SCD 540/4 SCD 540 SCD 660/6 SCD 880/8
Sea water inlet 2X1"-30mm 2X1"-30mm 2X1"-30mm 2X1"-30mm 2X1"-30mm 2X1"-30mm 2X1"-30mm 2X1"-30mm
Tank inlet (for washing) 2X1/2"-20mm 2X1/2"-20mm 2X1/2"-20mm 2X1/2"-20mm 2X1/2"-20mm 2X1/2"-20mm 2X1/2"-20mm 2X1/2"-20mm
Concentrate drain 2X1/4"-10mm 2X1/4"-10mm 2X1/4"-10mm 2X1/4"-10mm 2X1/4"-10mm 2X1/4"-10mm 2X1/4"-10mm 2X1/4"-10mm
Permeate outlet 2X1/4"-10mm 2X1/4"-10mm 2X1/4"-10mm 2X1/4"-10mm 2X1/4"-10mm 2X1/4"-10mm 2X1/4"-10mm 2X1/4"-10mm
Not conforming water outlet 2X1/2"-20mm 2X1/2"-20mm 2X1/2"-20mm 2X1/2"-20mm 2X1/2"-20mm 2X1/2"-20mm 2X1/2"-20mm 2X1/2"-20mm
REGULATION SCD 260/2 SCD 260 SCD 400 SCD 470 SCD 540/4 SCD 540 SCD 660/6 SCD 880/8
Working pressure 60 bar 60 bar 60 bar 60 bar 60 bar 60 bar 60 bar 60 bar
Alarm for low pressure 20 bar 20 bar 20 bar 20 bar 20 bar 20 bar 20 bar 20 bar
Alarm for high pressure 68 bar 68 bar 68 bar 68 bar 68 bar 68 bar 68 bar 68 bar
Flow rates are calculated for sea waters with the following characteristics: 35000 ppm a 25°C at 60 bar
MODEL SCDV 260/2 SCDV 260 SCDV 400 SCDV 470 SCDV 540/4 SCDV 540 SCDV 660/6 SCDV 880/8
Flow rate Lt/h 260 260 400 470 540 540 660 880
Nominal flow rate Lt/h 332 332 498 581 664 664 840 1120
Daily flow rate Lt/day 6240 6240 9600 11280 12960 12960 15840 21120
Nominal flow rate Lt/day 7968 7968 11952 13944 15936 15936 20160 26880
Installed Power kW 2x2.2 2x2.2 2x2.2 2x2.2 2x2.2 2x2.2 2x3 2x3
Total Weight Kg 139 177 202 215 153 215 175 197
Overall dimension mm 840X 840X 840X 840X 840X 840X 840X 840X
LxHxD 1100X495 1100X495 1100X495 1100X495 1100X495 1100X495 1100X495 1100X495
CONNECTION SCDV 260/2 SCDV 260 SCDV 400 SCDV 470 SCDV 540/4 SCDV 540 SCDV 660/6 SCDV 880/8
Sea water inlet 2X1"-30mm 2X1"-30mm 2X1"-30mm 2X1"-30mm 2X1"-30mm 2X1"-30mm 2X1"-30mm 2X1"-30mm
Tank inlet (for washing) 2X1/2"-20mm 2X1/2"-20mm 2X1/2"-20mm 2X1/2"-20mm 2X1/2"-20mm 2X1/2"-20mm 2X1/2"-20mm 2X1/2"-20mm
Concentrate drain 2X1/4"-10mm 2X1/4"-10mm 2X1/4"-10mm 2X1/4"-10mm 2X1/4"-10mm 2X1/4"-10mm 2X1/4"-10mm 2X1/4"-10mm
Permeate outlet 2X1/4"-10mm 2X1/4"-10mm 2X1/4"-10mm 2X1/4"-10mm 2X1/4"-10mm 2X1/4"-10mm 2X1/4"-10mm 2X1/4"-10mm
Not conforming water outlet 2X1/2"-20mm 2X1/2"-20mm 2X1/2"-20mm 2X1/2"-20mm 2X1/2"-20mm 2X1/2"-20mm 2X1/2"-20mm 2X1/2"-20mm
REGULATION SCDV 260/2 SCDV 260 SCDV 400 SCDV 470 SCDV 540/4 SCDV 540 SCDV 660/6 SCDV 880/8
Working pressure 60 bar 60 bar 60 bar 60 bar 60 bar 60 bar 60 bar 60 bar
Alarm for low pressure 20 bar 20 bar 20 bar 20 bar 20 bar 20 bar 20 bar 20 bar
Alarm for high pressure 68 bar 68 bar 68 bar 68 bar 68 bar 68 bar 68 bar 68 bar
Flow rates are calculated for sea waters with the following characteristics: 35000 ppm a 25°C at 60 bar
Note: The effective production of drinking water can be lower of about 40-50% in comparison with the nomi-
nal capacity, in function of a temperature of the seawater lower than 25°C, in function of the grade of the filth
of the water in taken and other negative factors.
STANDARD KITS
WASHING KIT (COD.1) Includes: 1KG EB A1 - 1KG EB B2 - 1KG EB CONSERVE 120
Extra for ADR package (airfreight) 80
FILTER KIT UC SERIES (COD.2) includes: 57
4 wounded 5 micron 5 inches mignon cartridge
MEMBRANES AND PRESSURE VESSELS (compatible with all the watermaker brands)
Pressure Vessel 2521 (2,5 inches x 21 inches) AISI 316 450
Pressure Vessel 2540 (2,5 inches x 40 inches) AISI 316 620
Pressure Vessel 31540 (3,15 inches x 40 inches) Fiberglass 600
Pressure Vessel 4040 (4 inches x 40 inches) 1.200
Pressure Vessel 8040 (8 inches x 40 inches) 2.600
Nanofiltration Membrane for HP ACQUA PURA + pressure ves. 380
Osmotic Membrane SW 30 2521 DOW CHEMICAL 426
Osmotic Membrane SW 30 2540 DOW CHEMICAL 582
UV STERILIZER
UV Sterilizer 2500 Lt/h 1.250
UV Sterilizer 5000 Lt/h 1.750
UV Sterilizer 8000 Lt/h 2.950
UV Sterilizer 13000 Lt/h 5.000
UV Sterilizer 18000 Lt/h 5.700
UV Sterilizer 26000 Lt/h 5.900
SODA MACHINES
Manual CO2 FIZZY WATER MACHINE include: 196
1 C - 1 P.E.T . 1 Lt bottle - 1 P.E.T. 0,5 Lt bottle - 250gr CO2
rechargeable container 60
250 gr CO2 rechargeable container 12
PACKAGES
Package (mod. UC) 60
Package (mod. SC - SC KIT) 120
Package (mod. V) 120
Package (mod. DOUBLE) 350
UV Steriliser
DITTA - COMPANY
MITTENTE - SENDER
ALIMENTO - FEED
PERMEATO - PERMEATE
RECUPERO - RECOVERY
PRETRATTAMENTO - PRETREATMENT
UTILIZZO - APPLICATION
ALIMENTO - FEED
Il suddetto questionario è richiesto per la costruzione di impianti ad osmosi inversa per acque diverse da
quelle di mare (come ad esempio possono essere quelle di pozzo).
I dati richiesti sono fondamentali per l’esatto dimensionamento dell’impianto ad osmosi inversa, si racco-
manda pertanto di compilare il questionario in tutte le sue parti.
The above form is requested for the construction of Reverse Osmosis plants for the treatment of brackish
and tap waters.
The requested data are fundamental for the perfect dimensioning of the RO system, then HP HIGH PRESSURE
Srl suggest to fill the form in all its parts.
In case the registration card will not be sent back within the specified terms, the warranty will not
be considered valid.
The warranty covers every defects of the materials or of manufacturing and it is limited to the repairing and/or the
substitution of the defective part at the factory of ZIBIDO SAN GIACOMO, MILANO, ITALY.
The warranty only cover the parts and does not cover any labor, trip, lodge or any transport costs at the customers
place. These costs will be on customer’s charge. These expenses will be calculated by HP, approved and paid
before the service intervention will take place.
The warranty is subjected to the yearly intervention, effected by the authorized HP SERVICE POINTS.
The maintenances MUST be effected yearly at the end of every season (filter change, membrane conservation etc.).
The maintenances will be subjected to the INTERVENTION COST and to the consumable material cost (as oils,
filters). These costs will have to be paid at the service point following its rates and payment conditions.
The watermakers will be considered covered by warranty, after the first year, only showing the SERVICE stamp on
the booklet.
Any bad intervention or manumission on the machine, by not authorized personnel will let the warranty automati-
cally decay.
If one of the yearly maintenance has not been effected the warranty will not be considered valid.
In any case the warranty does not give the right for any kind of compensation.
HP HIGH PRESSURE SRL declines any responsibility for damages caused by its machines.
- if the machine has been repaired, dismantled, or manumitted by non authorized personnel.
- If the damage has been provoked by a wrong installation.
- If the machine has been used improperly.
- If the machine has been used in the harbors.
- If the machine has been used in polluted waters.
- If the machine has been used over its limit (see user manual).
- If the material are subjected to the normal wearing down.
The machine or the defected part will have to be sent back to the HP factory in ZIBIDO SAN GIACOMO.
HP can express the last judgment about the causes of the damage and, if it can be considered as a case of war-
ranty.
After the reparation, the plant or the part will be sent back to the customer, that will be charged
of the shipment costs.
HP High Pressure Srl has the right, to apply any modifications, to the warranty terms, at any time.
COMPETENT COURT - For any eventual dispute, Milan will be the competent court.
HP WATERMAKERS UAE
Al Badr Street
Old Industrial Area
AJMAN UAE
e-mail: hpuae@hpwatermaker.it