| a
SION: B
i REVI
[PROTECTIVE COATING - MARINE SYSTEM |
ene Lechnological Dept —_DALE_ 12.08 2022
Effective date: [2.08 Issued; Eng M. Aldea
Approved ng Susnea
1. SCOPE
This specification establishes the requirements for cortosion protection coating — spray
painting on metal surfaces
The painting system is recommended for the cotrosion protection of steel surfaces, of metal
landmarks exposed to corrosion in the marine environment.
2, REQUIREMENTS
2.1 Surface preparation — abrasive sandblasting — Sa 2.5 according to ISO 8501-1
22 the painting system has three layers
The coating thickness is 240 pm
The allowed tolerance is -10 - +40%
23 The enamel film should be glossy, uniform, with vo traces of dry spray
24 The color of the enamel corresponds to the client requirements.
3. PAINTING SYSTEM
Marine system consisting of: Epoxy primer Primepo Zn62~ Epoxy enamel Primepo £6425
- Polyurethane enamel Primuran E1529
3.1 Used products are:
+ zinc-rich epoxy primer Primepo Zn62
- epoxy enamel Primepo £642
+ polyurethane enamel Primuran E1529
~ thinner for epoxy products Primadil D025
thinner for polyuzethane products Primadil D725
3.2 Zine-tich epoxy primer Primepo Zn62
No. Of applied layers — 1
Layer thickness ~ 60 jum
Mixing ratio
= “A” component (base) 4 patts : “B” component (hardener) | part
3.3 Epoxy enamel Primepo E6423
No. Of applied layers ~ 1
Layer thickness 100 um
Mixing ratio:
- _“A" component (base) 4 parts: “B component (hardener) ] part
3.4 Polyurethane enamel Primuran £1529
No. Of applied layers — 1
Layer thickness 80 um.
Mixing ratio:
“A” component (base) 3 parts: “B” component (hardener) 1 partHelge ree eine leset ieinaiaae sos?
| ae | neviston B
3.5 Reeoating time
recoating time with Epoxy enamel layer
Temperate &
Yo huni
| Temperature & 50% |
humidity
10°C
20°
Final drying time (temperatures higher than 10°C)
4) REVISION CONTROL 1ABL
Drying for recoating
g time with poly urethane cnamel layer is
Diyin;
“Thou
for recoatin
1 hour
24 hours,
| Effective date
62015 |
15.10.2015
{15.10.2015 _
_ PROTECTIVE COATING - MARINE SYSTEM
Aathorization
—_| OM Dept
_ YM