This document provides 9 problems for determining internal forces like normal force, shear force, and bending moment at various points along simply supported and continuous beams. The problems involve calculating these internal forces at specific points, sections, and determining the location of supports to achieve a certain internal force value.
This document provides 9 problems for determining internal forces like normal force, shear force, and bending moment at various points along simply supported and continuous beams. The problems involve calculating these internal forces at specific points, sections, and determining the location of supports to achieve a certain internal force value.
This document provides 9 problems for determining internal forces like normal force, shear force, and bending moment at various points along simply supported and continuous beams. The problems involve calculating these internal forces at specific points, sections, and determining the location of supports to achieve a certain internal force value.
and moment at points E and F in the beam. Chapter 7: Internal Forces
Problem Set #5
1.Determine the internal normal force, shear force, and
moment at points C and D in the simply-supported beam. Point D is located just to the left of the 2500-lb force.
6. Determine the shear force and moment acting at
a section passing through point C in the beam.
2. Determine the internal normal force, shear force,
and the moment at points C and D.
7. Determine the internal normal force, shear force,
and bending moment at point C
3. Determine the normal force, shear force, and
moment at a section passing through point C. Assume 8. Determine the internal normal force, shear force, the support at A can be approximated by a pin and B as and moment acting at point C and at point D, which is a roller. located just to the right of the roller support at B.
4. Determine the normal force, shear force, and
9. Determine the distance a as a fraction of the beam’s moment in the beam at sections passing through points length L for locating the roller support so that the D and E. Point E is just to the right of the 3-kip load. moment in the beam at B is zero.