4 + Third Party Template *** ExxonMobil
Proprietary
Component Sheet
Component Name: 70216 Component Number: 70216
‘Trade Name: 70216 Mcs97: s7ca98
Product Number: 969519
Revision Date: w2gub4s . Version: 1.0
STRIPES PH6: __ 1010806020
Type: Additive
Sub Type ‘SubType 2:
Modifier - Dissolved Olefin Copolymer ~
Yy polyt
H2S Hazard: No
Supplier: Chevron Oronite Company LLC
Supplier Manufacturing Source (no restrictions unless specified below):
Country Location ‘Miz. Source Remarks
Certificate of Analysis Specifications:
Limits
‘Chem, & Pivs. Property VOM Methods Min Te
D Kinematic Viscosity 100 ¢ cst asi 0445 13.7
(Blend)
Kinematic Viscosity @ 100 mna/s ASTM D4aS 600 300
2 ASTM Color none ASTM D150 1s
3. Infrared Spectrum none OAM 1030 Matches
1 Appearance None OAM 3027__PASS
Density @ 15 C kg/l_ ASTM D4052 REPORT
Footnotes:
(1) Test blend is 15.0 mass % CN 70216 in ENJ-202 (ENJ-202 is a solvent refined
paraffinic base oil with a typical KVLO0 of 4,6 mm2/s and is not pour point
depressed) .
(2) Either method ASTM 01500 or ASTM D6045 is acceptable
(3) Alternate method ASTM £1252 also acceptable.
(4) Appearance pass is clear to slightly hazy.
C of A Notes:
(1) A Certificate of Analysie is required on the product as delivered and ust include a
date from which the recommended shelf life of the product can be assessed. When it is
within the supplier capability, methods used shall be indicated on Certificates of
Analys
(2) ALL material supplied must be tested by Supplier or designee according to this
specification and meet the etated quality limits. The test methods used must either match
as quoted above or alternative test methods may be used provided the Supplier has
documented statistical equivalence.
Limits
YOM — Methods Min Tn Max
1 Flash Point =o ASTM D93___170
Page 1/3 Printed on: 12-Apr-17 5:57 AM/ + Third Party Template *** ExonMobil
Proprietary
Component Sheet
‘Trade Name: 70216
Revision Date: 12 guL 15 * Version: 1.0
STRIPES PH 1020806020
2 Density ¢ 15 ¢ kg/1 __ ASTM D4052 0.8540
3 Kinematic Viscosity 100 C ost ASTM D445 14.0
(Blend)
Kinematic Viscosity @ 100 ¢ nm2/s__ ASTM D445 750
Kinematic Viscosity @ 40 C mm/s ASTM D445 3000
Footnote
1) Guaranteed specification
(2) Specific Gravity may be reported
12) Rese Blend is 15.0 mags ® GN 7al6 in ENS 202 (URI-202 Oe solvent refined
paraffinic base oil with a typical KV100 of 4.6 mn2/s and 15 not pour poi
depressed) «
Other Characteristics Not
Other Ceeacteristices are defined as characteristics which az0 expected to be met for every
Penge Ge product, but which are not expected to be tested oF ‘reported for every batch which
is produced or delivered.
Handling and Storage lastruetions, Including Temperatures:
Blending Temperature
Storage Temperature
Handling Temperature
Handling and Storage Notes:
ior maximum shelf life, store at < 45 °C
Shelf Life Recommendations: uration. io
24 m0 fiiperature < 45°C, Humidity < 908
FDA Regulations: None
Sheet Comments:
None
eaxonMobil must be notified of any modifications to the material described in this
serafication. Suppliers with formal procurement asroenslie ‘and/or whe have committed to
ezeply with BxxonMobil's Component Product Integr4 ty Manual may notify ExxonMobil based on
conPty ins and conditions defined in said agreements. Before, any, dispatch of the modified
tne eit], gupplier and ExxonMobil must mutually agree that ‘he ‘change causes no detrimental
Takect on performancs. Revised safety data shests must Pe ‘provided to ExxonMobil if
impacted by the change.
Historical Changes:
1.0 12 JUL 15 REVIEW COMMENTS ENTERED BY MENG YE
(ECR 4895)
Page 273 Printed ont 12-Apr-17 5:57 AM
"agComponent Name: 70216 Component Number:
‘Trade Name: 70216 Mcs97:
Product Number:
Reviston Date: 12 JUL 15 . Version:
STRIPES PH 101020602
*** Third Party Template ***
Proprietary
Component Sheet
ExonMobil
Page 3/3
Printed on: 12-Apr-17 5:57 AM