Professional Documents
Culture Documents
Orfit develops and produces orthotic fabrication We reach this goal through innovative R&D
materials that offer the highest possible and manufacturing.
performance to both therapists and patients in
physical rehabilitation. Our Research and Development team is
dedicated to continuously developing new
Innovative solutions for your orthotic products as well as improving existing
requirements products and applications. We work in
close collaboration with the most advanced
We are truly the only provider that invents rehabilitation centres throughout the world to
innovative thermoplastic formulations and that make sure that our products and services meet
uses the latest manufacturing techniques to your requirements.
make materials that offer the best solution to
you and your patient. Our state of the art production facilities feature
highly advanced thermoplastic compounding
All of our materials are of the utmost quality and extrusion technology. We carefully control
and comply with uncompromising standards of every production stage since it has a direct
safety and quality control. impact on how orthotic fabrication materials
perform in your daily practice.
Our goal is to provide you with solutions for all
your orthotic fabrication requirements. Rigorous control is crucial to ensure that all of
our products are ideally suited to their purpose
Innovative R&D and production and your needs.
2
ABOUT ORFIT
High quality standards MRSA, the so called hospital bacteria, is Environmental responsibility
the most common nosocomial infection in
High quality standards reflect our way of Europe. It is estimated that over 170,000 MRSA All of our thermoplastic materials are tested
thinking. Orthotic applications in physical infections in Europe result in 5000 deceases according to strict biocompatibility standards.
rehabilitation require accuracy and durability. every year. The Department of Health and They are all latex-free and biodegradable. We
The same goes for our production process. Human Services in the USA estimated 94,360 comply with the most stringent environmental
We are committed to providing excellent invasive MRSA infections in 2008, associated standards throughout the production process.
quality products that are available within the with 18,650 deaths each year.
shortest deadlines. Our commitment is backed Education
by compliance with ISO 13485 standards, as The WHO considers the Escherichia colli as
well as with European CE standards, FDA a “super bacteria” because it is increasingly We are committed to excellence in customer
standards and many other national standards. resistant to antibiotics. education.
We are firmly devoted to safety and to The antibacterial property prevents cross Orfit is pleased to offer assistance with all of
preserving the environment. contamination in a clinical setting and keeps your splinting questions and patient concerns.
orthoses hygienic for a longer period of time. We also offer high quality practical splinting
Antibacterial property These orthoses also have a longer life cycle. workshops to promote excellence in orthotic
fabrication.
The majority of our thermoplastic materials Non-stick (NS) coating
have a unique antibacterial property. The We have the answers to your most challenging
antibacterial effect of the coating was The majority of Orfit products have a non- questions about orthoses, including tips and
determined using the ISO 22196:2011 test stick (NS) coating. The NS coating allows tricks to make splinting fun!
method. The results show a reduction for temporary bonding during fabrication.
of > 99,99% of the following bacteria: After fabrication of the orthosis, the bonded
> Methicillin-Resistant Staphylococcus Aureus materials can be opened. The orthosis can be
(MRSA) moulded directly onto bandages and cotton
> Staphylococcus Aureus lining in post-surgical conditions. In addition,
> Escherichia Colli the NS coating makes the orthosis more
> Vancomycin-Resistant Enterococci (VRE) resistant to fingerprints and dirt.
3
ABOUT THE PRODUCTS
Drapability
4
TABLE OF CONTENTS
TABLE OF CONTENTS
6 ELASTIC PRODUCTS 24 HIGH RESISTANCE 38 ACCESSORIES
TO STRETCH PRODUCTS
6 Orficast® Thermoplastic on a Roll 38 Allfit™
- Orficast® 24 Multifit® NS 40 Dynasyst™
- Orficast® More 26 Orfit® Eco 45 Hook and Loop straps
8 Orfit® Classic 28 Orfibrace™ NS 46 Working tools
10 Orfit NS
®
48 Padding and lining
12 Orfit Colors NS
®
49 Water baths
14 Orfit Strips
®
30 FLEXIBLE PRODUCTS 50 Dry heater
16 Orfilight® NS 51 Heat gun
- Orfilight NS ®
30 Orfit Crystal NS
®
- Orfilight Black NS
®
52 EDUCATION
- Orfilight Atomic Blue NS
®
AND INFORMATION
18 Aquafit™ NS 32 ORFIT PRE-CUTS
20 Tecnofit ™
52 Tips for working with
22 Orfizip Light NS
®
33 Orfit Classic pre-cuts
®
Orfit thermoplastic materials
35 Orfilight NS pre-cuts
®
53 Maintenance of the orthosis
36 Orfit® Eco pre-cuts 54 Material properties
37 Orfit Colors NS pre-cuts
®
56 Textbooks
57 Online product information and education
58 PRODUCT OVERVIEW
58 Product overview
5
ELASTIC PRODUCTS | ORFICAST® THERMOPLASTIC ON A ROLL
Comes in different widths, thicknesses and A large variety in widths and thicknesses enables you to treat a wide range of clinical applications
colours and to accommodate different orthotic designs. Orficast More allows, amongst others, for making
a volar or dorsal slab.
Excellent elasticity in two directions Allows precise conformability to the patient's anatomy, for example in the web space.
Adaptable when needed Orthoses can be adapted when corrections are needed. Avoids waste of material.
Easy to cut Easy to cut and add small pieces to use as a reinforcement of the orthosis.
Self-adhesive capacity, especially when dry Dry heat is helpful for bonding corners and straps. Overlapping seams are not perceptible on the
heated inside.
Breathable material Excellent patient comfort and compliance: lightweight, allows ventilation and prevents maceration
of the skin.
7
ELASTIC PRODUCTS | ORFIT® CLASSIC
ORFIT® CLASSIC
HIGH PERFORMANCE HANDLING
Recommended applications
Unlimited potential for fabrication of very
large to very small upper and lower extremity
orthoses according to the thickness you
choose.
“Soft” version:
Small finger, thumb, hand, wrist, wrist/thumb,
elbow and toe orthoses and cervical collars.
“Stiff” version:
Large and long arm orthoses, AFO’s and
circumferentially applied fracture bracing.
PRODUCTS
ELASTIC
ELASTIC PRODUCTS | ORFIT® CLASSIC
Non-coated material Temporary adhesion during orthotic fabrication and reliable permanent bonding by using dry
heat. Tackiness helps orthosis to stay in place during fabrication.
All attachments and outriggers can be applied with maximum ease.
Excellent stretch (1000%) without tearing Very precise moulding that conforms to patient anatomy, for example in the hand arches
and first web space.
Full elastic memory (100%) Completely remouldable and easy to adjust after reheating locally. Avoids waste of material.
Available in high stretch (“soft”) version “Soft” version has less resistance to stretch and more drape.
and low stretch (“stiff”) version “Stiff” version has increased resistance to stretch and less drape.
Surface with antibacterial properties Prevents cross contamination between materials in a splinting department and keeps orthoses
hygienic for a longer period of time. Orthoses have a longer life cycle.
9
ELASTIC PRODUCTS | ORFIT® NS
ORFIT® NS
COATED FOR EASE OF USE
Recommended applications
Unlimited potential for fabrication of very large
to very small orthoses.
“Soft” version:
Small finger, thumb, hand, wrist, wrist/thumb,
elbow and toe orthoses and cervical collars.
“Stiff” version:
Large and long arm orthoses, AFO’s and
circumferentially applied fracture bracing.
PRODUCTS
ELASTIC
ELASTIC PRODUCTS | ORFIT® NS
Coated, non-stick material No accidental bonding. Allows for moulding directly over bandages and cotton linings in post-
surgical conditions. Coating allows for temporary bonding during fabrication.
Reliable permanent bonding is possible after removing the coating and using dry heat.
All attachments and outriggers can be applied with maximum ease.
Excellent stretch (1000%) without tearing Very precise moulding that conforms to patient anatomy, for example in the hand arches and first
web space. Accurate moulding improves correct dispersion of skin pressure.
Full elastic memory (100%) Completely remouldable and easy to adjust after reheating locally.
Avoids waste of material.
Available in high stretch (“soft”) version “Soft” version has less resistance to stretch and more drape.
and low stretch (“stiff”) version “Stiff” version has increased resistance to stretch and less drape.
Surface with antibacterial properties Prevents cross contamination between materials in a splinting department and keeps orthoses
hygienic for a longer period of time. Orthoses have a longer life cycle.
11
ELASTIC PRODUCTS | ORFIT® COLORS NS
ORFIT® COLORS NS
EXCITING COLOURS FOR YOUR PATIENTS
Recommended applications
Unlimited potential for fabrication of very
small to very large orthoses according to the
thickness you choose. Small finger, thumb,
hand, wrist, wrist/thumb, elbow and toe
orthoses, cervical collars and circumferentially
applied fracture braces.
Coated, non-stick material No accidental bonding. Allows for moulding directly over bandages and cotton linings in post-
surgical conditions. Coating allows for temporary bonding during fabrication.
Reliable permanent bonding is possible after removing the coating and using dry heat.
All attachments and outriggers can be applied with maximum ease.
Excellent stretch (1000%) without tearing Very precise moulding that conforms to patient anatomy, for example in the hand arches and first
web space. Accurate moulding improves correct dispersion of skin pressure.
Excellent elastic memory (100%) Completely remouldable and easy to adjust after reheating locally. Avoids waste of material.
Surface with antibacterial properties Prevents cross contamination between materials in a splinting department and keeps orthoses
hygienic for a longer period of time. Orthoses have a longer life cycle.
Sonic Silver Atomic Blue Gold Violet Hot Green Dominant Black Dynamic Red Ocean Blue Bright Pink
13
ELASTIC PRODUCTS | ORFIT® STRIPS
ORFIT® STRIPS
QUICK AND EASY TO USE
Recommended applications
Quick and easy moulding of small corrective
finger and hand orthoses, such as anti-swan
neck orthosis and anti-claw hand orthosis.
Coated, non-stick material No accidental bonding. Allows for moulding directly over bandages and cotton linings in post-
surgical conditions. Coating allows for temporary bonding during fabrication.
Reliable permanent bonding is possible after removing the coating and using dry heat.
All attachments and outriggers can be applied with maximum ease.
Available in two widths and two thicknesses Choice of material thickness according to the required resistance to force.
Surface with antibacterial properties Prevents cross contamination between materials in a splinting department and keeps orthoses
hygienic for a longer period of time. Orthoses have a longer life cycle.
15
ELASTIC PRODUCTS | ORFILIGHT® NS
ORFILIGHT® NS
UP TO 30% LIGHTER THAN OTHER MATERIALS
Coated, non-stick material No accidental bonding. Allows for moulding directly over bandages and cotton linings in post-
surgical conditions. Coating allows for temporary bonding during fabrication. Reliable permanent
bonding is possible after removing the coating and using dry heat. All attachments and outriggers
can be applied with maximum ease.
Surface with antibacterial properties Prevents cross contamination between materials in a splinting department and keeps orthoses
hygienic for a longer period of time. Orthoses have a longer life cycle.
Maximum stretch without tearing Easy to handle and perfect control of material during moulding. Material can be stretched
sufficiently in order to position the material correctly and hold it in place during orthotic
fabrication.
Moderate memory Completely remouldable and easy to adjust after reheating locally. Avoids waste of material.
Soft velvet surface touch and easy to trim edges Patient comfort leading to increased patient compliance with wearing schedule.
17
ELASTIC PRODUCTS | AQUAFIT™ NS
AQUAFIT™ NS
THE BEAUTY OF CRYSTAL WHITE
Recommended applications
Unlimited potential for fabrication of very
large to very small upper and lower extremity
orthoses according to the thickness you
choose.
“Soft” version:
Small finger, thumb, hand, wrist, wrist/thumb,
elbow and toe orthoses and cervical collars.
“Stiff” version:
Large and long arm orthoses, AFO’s and
circumferentially applied fracture bracing.
18
PRODUCTS
ELASTIC
ELASTIC PRODUCTS | AQUAFIT™ NS
Coated, non-stick material No accidental bonding. Allows for moulding directly over bandages and cotton linings in post-
surgical conditions. Coating allows for temporary bonding during fabrication.
Reliable permanent bonding is possible after removing the coating and using dry heat.
All attachments and outriggers can be applied with maximum ease.
Excellent stretch (1000%) without tearing Very precise moulding that conforms to patient anatomy, for example in the hand arches and first
web space. Accurate moulding improves correct dispersion of skin pressure.
Full elastic memory (100%) Completely remouldable and easy to adjust after reheating locally. Avoids waste of material.
Available in high stretch (“soft”) version and “Soft” version has less resistance to stretch and more drape.
low stretch (“stiff”) version “Stiff” version has increased resistance to stretch and less drape.
Surface with antibacterial properties Prevents cross contamination between materials in a splinting department and keeps orthoses
hygienic for a longer period of time. Orthoses have a longer life cycle.
19
ELASTIC PRODUCTS | TECNOFIT™
TECNOFIT™
STRONG AND RIGID SUPPORT
Recommended applications
Unlimited potential for the fabrication of all
size orthoses according to the thickness you
choose with extra care and prevention of
pressure points.
Non-coated material Temporary adhesion during orthotic fabrication and reliable permanent bonding by using dry
heat. Tackiness helps orthosis to stay in place during fabrication.
All attachments and outriggers can be applied with maximum ease.
Excellent stretch (300%) without tearing Very precise moulding that conforms to patient anatomy, for example in the hand arches and first
web space. Accurate moulding improves correct dispersion of skin pressure.
Excellent elastic memory Completely remouldable and easy to adjust after reheating locally. Avoids waste of material.
21
ELASTIC PRODUCTS | ORFIZIP® LIGHT NS
ORFIZIP® LIGHT NS
ACTIVATE, MOULD AND ZIP
Recommended applications
Lightweight circumferential orthoses for
immobilization and protection following trauma
and/or surgery.
22
PRODUCTS
ELASTIC
ELASTIC PRODUCTS | ORFIZIP® LIGHT NS
Excellent stretch Very precise moulding conforms to patient anatomy, for example in the hand arches and first web
space. Accurate moulding improves correct dispersion of skin pressure.
Coated, non-stick material No accidental bonding. Allows for moulding directly over bandages and cotton linings in post-
surgical conditions. Reliable permanent bonding is possible after removing the coating and using
dry heat. All attachments and outriggers can be applied with maximum ease.
Can accommodate all wrist sizes Available in two thicknesses and three sizes (S, M, L) to accommodate all patients.
Quick and easy one-step application Time-saving (no additional attachments needed).
Length of zipper can be adjusted (zipper must be trimmed and properly sealed).
Increased patient comfort and compliance Washable, extra lightweight material with a soft velvet surface touch and optimal skin ventilation.
Easy to put on and take off.
Surface with antibacterial properties Prevents cross-contamination between materials in a splinting departement and keeps orthoses
hygienic for a longer period of time. Orthoses have a longer life cycle.
23
HIGH RESISTANCE TO STRETCH PRODUCTS | MULTIFIT® NS
MULTIFIT® NS
EMBRACE DIVERSITY
24
PRODUCTS
ELASTIC
HIGH RESISTANCE TO STRETCH PRODUCTS | MULTIFIT® NS
High resistance to stretch and moderate drape The perfect balance between drape and resistance to stretch. The material holds it shape
perfectly against increased tone, and it readily contours to the fingers, hands and wrist using mild
to moderate pressure.
Minimal memory The fabricated orthosis will hold its shape when heated for minor adjustments. Small corrections
are easy to make after spot-heating the orthosis with a heat gun.
Coated, non-stick material The non-stick coating prevents accidental bonding and allows for moulding directly over
bandages and cotton linings in post-surgical conditions. The coating allows for temporary
bonding during fabrication. Reliable permanent bonding is possible after removing the coating
and using dry heat. All attachments and outriggers can be applied with maximum ease.
Surface with antibacterial properties Prevents cross contamination between materials in a splinting department and keeps orthoses
hygienic for a longer period of time. Orthoses have a longer life cycle.
25
HIGH RESISTANCE TO STRETCH PRODUCTS | ORFIT® ECO
ORFIT® ECO
THE PERFECT SOLUTION FOR TIGHT BUDGETS
HIGH RESISTANCE
Orfit Eco is a tacky, non-coated material Temporary adhesion during orthotic fabrication and reliable permanent bonding by using dry
TO STRETCH
PRODUCTS
heat. Tackiness helps orthosis to stay in place during fabrication.
All attachments and outriggers can be adhered easily.
Orfit Eco Black NS is a non-stick, coated No accidental bonding. Allows for moulding directly over bandages and cotton linings in post-
material (NS version) surgical conditions. Coating allows for temporary bonding during fabrication. Reliable permanent
bonding is possible after removing the coating and using dry heat. All attachments and outriggers
can be applied with maximum ease.
Orfit Eco Black NS has a surface with Prevents cross contamination between materials in a splinting department and keeps orthoses
antibacterial properties hygienic for a longer period of time. Orthoses have a longer life cycle.
Offers excellent rigidity and excellent Easy handling and control of the material during moulding. Allows to apply pressure during the
resistance to fingerprints fabrication of the orthosis.
High resistance to stretch and low drape Very strong material which holds its shape perfectly against increased tone. The combination of
the moulding capacity and a precise pattern design allows to mould and conform to patient anatomy.
Low to moderate elastic memory Orthoses are completely remouldable. Avoids waste of material.
27
HIGH RESISTANCE TO STRETCH PRODUCTS | ORFIBRACE™ NS
ORFIBRACE™ NS
BACK TO ACTION, AS SOON AS POSSIBLE
Recommended applications
All large and rigid orthoses.
Permanent bracing.
HIGH RESISTANCE
Coated, non-stick material No accidental bonding. Allows for moulding directly over bandages and cotton linings in post-
TO STRETCH
PRODUCTS
surgical conditions. Coating allows for temporary bonding during fabrication.
Reliable permanent bonding is possible after removing the coating and using dry heat.
All attachments and outriggers can be applied with maximum ease.
Excellent rigidity and excellent resistance to Allows to apply pressure during the fabrication of the orthosis.
fingerprints Excellent for all mechanical attachments.
High resistance to stretch and low drape Easy handling and control of material during moulding.
Moderate memory Remouldable. Orthosis can be easily adjusted after local reheating.
Smooth surface finish Comfortable and pleasant surface feel, which may contribute to patient compliance.
Surface with antibacterial properties Prevents cross contamination between materials in a splinting department and keeps orthoses
hygienic for a longer period of time. Orthoses have a longer life cycle.
29
FLEXIBLE PRODUCTS | ORFIT® CRYSTAL NS
ORFIT® CRYSTAL NS
SEE-THROUGH SOFTNESS
Recommended applications
Soft and flexible circumferential orthoses for
protection during sporting and activities.
30
FLEXIBLE PRODUCTS | ORFIT® CRYSTAL NS
Coated, non-stick material No accidental bonding. Allows for moulding directly over bandages and cotton linings in post-
surgical conditions. Coating allows for temporary bonding during fabrication.
Low elastic memory Small corrections can be made after reheating locally.
Flexible material Flexible orthoses can help remind patients to avoid extreme positioning without completely
PRODUCTS
FLEXIBLE
immobilizing their extremity.
Lightweight Allows for the fabrication of lightweight and therefore more comfortable orthoses.
Surface with antibacterial properties Prevents cross contamination between materials in a splinting department and keeps orthoses
hygienic for a longer period of time. Orthoses have a longer life cycle.
31
ORFIT PRE-CUTS
ORFIT PRE-CUTS
SIZING
Measure the total hand width at the MCP joints
of the 2nd to 5th finger.
GAUNTLET THUMB POST ORTHOSIS 35810 (small) COMPLETE THUMB ORTHOSIS 35900 (small) DORSAL COCK-UP ORTHOSIS 35818 (x-small)
Orfit® Classic 35811 (medium) Orfit® Classic 35901 (medium) Orfit® Classic 35820 (small)
1.6 mm (1/16”) micro perfo, soft 35812 (large) 2.0 mm (1/12”) micro perfo, soft 35902 (large) 3.2 mm - 1/8” non perfo, stiff 35821 (medium)
This orthosis gives an extremely comfortable Intended for acute cases. The dorsal An excellent alternative to volar wrist 35822 (large)
immobilization and stabilization of the part at the level of the thumb prevents cock-up orthosis as this design allows for
complete thumb column. It can serve for hyperextension of the distal phalanx. increased function while maintaining the
the treatment of De Quervain tenosynovitis, This part can easily be cut away when wrist in extension. This orthosis design is
PRE-CUTS
rheumatoid arthritis, basal joint necessary. suitable as a base for the attachment of low
osteoarthritis, thumb sprain and pre- or profile outriggers. Available in four sizes for
post-operative thumb management. all hand sizes from children to adults.
WRIST + THUMB ORTHOSIS 35814 (small) GAUNTLET IMMOBILIZATION ORTHOSIS 35830 (small) ULNAR DRIFT ORTHOSIS 35817KL (left)
Orfit® Classic 35815 (medium) Orfit® Classic 35831 (medium) Orfit® Classic 35817KR (right)
2.0 mm (1/12”) micro perfo, soft 35816 (large) 2.0 mm (1/12”) micro perfo, soft 35832 (large) 3.2 mm - 1/8” non perfo, stiff
A traditional wrist and thumb immobilization A complete immobilization orthosis for the This unique pattern offers the most realistic
orthosis for very acute joint and tendon wrist. Due to its lightweight and small size, it and functional ulnar deviation orthosis for
inflammations. This orthosis gives full is very comfortable, very supportive and also patients with early stages of rheumatoid
comfort thanks to its circumferential design extremely strong and durable. arthritis and ulnar drift of the digits.
and long lever.
33
ORFIT PRE-CUTS
ANTI-SPASTIC ORTHOSIS + THUMB PIECE 35870 (small) INTRINSIC ANTI-SPASTIC HAND ORTHOSIS 35910 (small)
Orfit® Classic 35871 (medium) Orfit® Classic 35911 (medium)
3.2 mm - 1/8” non perfo, stiff 35872 (large) 3.2 mm - 1/8” mini perfo, stiff 35912 (large)
This orthosis design offers an easy way to This orthosis has a radial bar for added
manage the patient with spasticity of the strength on the radial side of the orthosis,
upper extremity. The volar-dorsal design ideal for patients with spasticity.
and separate thumb piece make orthotic
fabrication easier. The orthosis maintains the
wrist and fingers in extension.
INTRINSIC RESTING HAND ORTHOSIS 35850 (small) RHEUMATOID ARTHRITIS RESTING ORTHOSIS 35840 (small)
Orfit® Classic 35851 (medium) Orfit® Classic 35841 (medium)
3.2 mm - 1/8” non perfo 35852 (large) 3.2 mm - 1/8” mini perfo 35842 (large)
An orthotic design for management of a A specific design for preventive and
variety of hand problems. corrective orthotic fabrication of the
stereotype rheumatoid hand. Both antero-
posterior and latero-lateral deformities
of wrist and fingers, as well as thumb
deformities, are easily realigned.
34
ORFIT PRE-CUTS
ORFILIGHT® NS PRE-CUTS
RHEUMATOID ARTHRITIS RESTING 35840/L (small) WRIST + THUMB ORTHOSIS 35814Z/L/NS (small) DORSAL BLOCKING ORTHOSIS 35843/L (small)
ORTHOSIS 35841/L (medium) Orfilight® Black NS 35815Z/L/NS (medium) Orfilight® NS 35844/L (medium)
Orfilight® NS 35842/L (large) 2.5 mm (3/32”) micro perfo 35816Z/L/NS (large) 2.5 mm - 3/32" micro perfo 35845/L (large)
2.5 mm (3/32") micro perfo A traditional wrist and thumb immobilization and 3.2 mm - 1/8” mini perfo
A specific design for preventive and orthosis for very acute joint and tendon This design is well suited for the custom
corrective orthotic fabrication of the inflammations. This orthosis gives full fabrication of an orthosis following flexor tendon
stereotype rheumatoid hand. comfort thanks to its circumferential design repair surgery.
PRE-CUTS
Both antero-posterior and latero-lateral and long lever.
deformities of wrist and fingers, as well as
thumb deformities, are easily realigned.
DORSAL COCK-UP ORTHOSIS 35818/L (x-small) GAUNTLET THUMB POST ORTHOSIS 35810/L (small)
Orfilight® NS 35820/L (small) Orfilight® NS 35811/L (medium)
3.2 mm - 1/8” non perfo 35821/L (medium) 1.6 mm (1/16”) micro perfo 35812/L (large)
35822/L (large) GAUNTLET THUMB POST ORTHOSIS 35810Z/L/NS (small)
DORSAL COCK-UP ORTHOSIS 35820Z/L/NS (small) Orfilight® Black NS 35811Z/L/NS (medium)
Orfilight® Black NS 35821Z/L/NS (medium) 1.6 mm (1/16”) micro perfo 35812Z/L/NS (large)
3.2 mm - 1/8” non perfo 35822Z/L/NS (large)
This orthosis gives an extremely comfortable immobilization and stabilization of the complete
An excellent alternative to volar wrist cock-up orthosis as this design allows for increased function while maintaining thumb column. It can serve for the treatment of De Quervain tenosynovitis, rheumatoid arthritis,
the wrist in extension. This orthosis design is suitable as a base or the attachment of low profile outriggers. basal joint osteoarthritis, thumb sprain and pre- or post-operative thumb management.
35
ORFIT PRE-CUTS
DORSAL COCK-UP ORTHOSIS 35818/ECO (x-small) ANTI-SPASTIC ORTHOSIS + THUMB PIECE 35870Z/ECO/NS (small) INTRINSIC ANTI-SPASTIC HAND ORTHOSIS 35910Z/ECO/NS (small)
Orfit® Eco 35820/ECO (small) Orfit® Eco Black NS 35871Z/ECO/NS (medium) Orfit® Eco Black NS 35911Z/ECO/NS (medium)
3.2 mm (1/8”) non perfo 35821/ECO (medium) 3.2 mm (1/8”) mini perfo 35872Z/ECO/NS (large) 3.2 mm (1/8”) mini perfo 35912Z/ECO/NS (large)
A most functional orthosis for most wrist 35822/ECO (large) The purpose of this orthosis is to maintain This orthosis has a radial bar for added
complaints, especially for flaccid palsy. the long flexor muscles stretched in order to strength on the radial side of the orthosis,
Very suitable as a basic orthosis to receive inhibit the hypertonicity. ideal for patients with spasticity.
low profile extension outriggers. Produced
in 4 sizes, one of which is for children (hand
width: 40-50 mm).
36
ORFIT PRE-CUTS
GAUNTLET THUMB POST ORTHOSIS 35810MB/NS (small) COMPLETE THUMB ORTHOSIS 35900B/NS (small)
Orfit® Colors NS 35811MB/NS (medium) Orfit® Colors NS 35901B/NS (medium)
2.0 mm (1/12”) micro perfo 35812MB/NS (large) 2.0 mm (1/12”) micro perfo 35902B/NS (large)
This orthosis gives an extremely comfortable Intended for acute cases. The dorsal
immobilization and stabilization of the part at the level of the thumb prevents
complete thumb column. It can serve for hyperextension of the distal phalanx. This
the treatment of De Quervain tenosynovitis, part can easily be cut away when necessary.
PRE-CUTS
rheumatoid arthritis, basal joint steoarthritis,
thumb sprain and pre- or post-operative
thumb management.
37
ACCESSORIES | ALLFIT™
ALLFIT™
ALWAYS FITS WHATEVER YOUR PATIENT NEEDS
Recommended applications
Change the shape of any appliance or utensil
handle.
Quick activation time (1 minute) Fast and easy to use and no need for special training.
Transparent when activated, white when cooled Indicates when the material is ready to mould. Pleasing neutral colour.
Pellets simply stick together uniformly and Short melting time and quick adherence around objects.
stick very well to other surface objects. Easy to mould into a desired shape. Smooth surface all around for increased patient comfort.
ACCESSORIES
Allfit is ready to use.
39
ACCESSORIES | DYNASYST™
DYNASYST™
MOBILIZATION ORTHOSES WITH ORFITUBE, COILS AND SPRINGS, AND ISOFORCE
Recommended applications
Orfitube
- Mobilization orthoses, for example post-
operative orthoses after tendon surgery or to
recover range of motion
- Fabrication of postural orthoses
Isoforce
- Lack of full passive PIP joint extension
- PIP joint flexion contracture
- Dynamic and static progressive orthoses
ACCESSORIES | DYNASYST™
Patient pleasing aesthetic appearance May lead to increased patient compliance with protocol.
Low profile design Spring coils are placed at the lateral sides of the joints.
Crossbar systems create a perpendicular traction force on the involved segment.
Large choice between Orfitubes and joint Orfitube Adjusters allow for easy and correct alignment of finger loops and easy to adjust angles.
spring coils Simplified adjustment and re-adjustment of correct angles of alignment and applied forces.
Outrigger system specifically designed to Isoforce ensures a constant force transmission and a constant force application angle throughout
address the problem of the stiff PIP joint the complete PIP joint range of motion. Isoforce maintains a 90 degrees force application angle
regardless of changes in joint position.
ACCESSORIES
41
ACCESSORIES | DYNASYST™
ORFITUBE
Art. N° 35311 - ORFITUBE™ KIT Art. N° 35305 - ORFITUBE™ ADJUSTER KIT Art. N° 35318 - ORFITUBE™ ENDS
Contains: > 10tubes of 330 mm (13”) long The Orfitube Adjuster puts you in full control of longitudinal and 20 pcs.
> 3 different types of elastic thread with different degrees lateral position of Orfitubes. But there is more than one angle from Chromium-plated tube ends, fit on all Orfitubes, reducing friction of
of elastic strength (on a spool). which you can look at this product. The compact design allows you the elastic thread with the tube edge to a minimum.
> 1 spool polyester monofilament for an optimal gliding to fix one individual adjuster for each finger. The adjusters are light-
effect (if necessary). weight, very cost-effective and more elegant than ever before.
> 2 bending wires.
Art. N° 35310 - ORFITUBES™ + BENDING WIRES Art. N° 35304 - SINGLE ORFITUBE™ ADJUSTER - 5 PCS. + Art. N° 35308 - ORFITUBE™ BENDING TOOL
10 tubes of 330 mm (13”) long, incl. 2 bending wires. ALLEN WRENCH For easy bending of the strong Orfitubes without stress on the
5 single Orfitube adjusters + 1 Allen wrench thumbs.
42
ACCESSORIES | DYNASYST™
Art. N° 35801 - KNUCKLE BENDER COIL SPRING Art. N° 35800 - FINGER COIL SPRING Art. N° 35802 - FINGER EXTENSION ASSIST
10 pcs. (Gauge 1 mm (1/24”) - coil diameter 10 mm (5/12”)) 10 pcs. (Gauge 0.7 mm (1/37”) - coil diameter 5 mm (1/5”)) 10 pcs. (Gauge 1 mm (1/24”) - coil diameter 4 mm (1/6”))
Designed to assist the intrinsic muscle weakness, e.g. with ulnar The short leg is bent and anchored in the dorsal bridge of the The short leg is secured between two layers of Orfit Classic.
nerve palsy. The spring can also be turned upside down to increase orthosis. The long leg is bent and cut to length. The spring power is The long leg is bent to size. At total finger flexion the spring is
spring power. Torque force at full finger extension: ca. 1000 g.cm. adjusted by altering the coil design. tightened up to a torque force of ca. 2000 g.cm. The spring is
especially designed for finger extension assists in combination with the
Orfit orthosis Art. N° 35818/ECO up to 35822/ECO.
ACCESSORIES
Art. N° 35804 - WRIST EXTENSION COIL SPRING RADIAL WRIST EXTENSION SPLINT Art. N° 35805 - SPRING WIRE
10 pcs. (5 left + 5 right) Art. N° 35865K (small) Length: 15 m (591”)
(Gauge 1.5 mm (1/16”) - coil diameter 15 mm (3/5”)) Art. N° 35866K (medium) Thickness: 1 mm (1/24”)
Two types supplied: coiled (left or right) Art. N° 35867K (large) For making your own coil springs and outriggers.
Torque force when tightened over an angle of 130°: 5000 g.cm. Radial nerve patients need two strong assisting extension coils.
When recovering, the coils help to rebalance muscle power.
Set for fabrication of one orthosis includes:
> 2 Orfit Classic pre-cuts (3.2 mm (1/8”) non perfo stiff).
> 2 lateral coil springs: gauge diameter 1.5 mm (1/16”) 43
Coil diameter 15 mm (3/5”) - Torque force: 5000 g. cm.
ACCESSORIES | DYNASYST™
ISOFORCE THREADS
44
ACCESSORIES | HOOK AND LOOP STRAPS
HOOK AND LOOP STRAP 25 MM (1”) HOOK AND LOOP STRAP 50 MM (2”) DOUBLE SIDED HOOK OR LOOP STRAP
Available in a standard and self-adhesive version in different colours. Available in a standard and self-adhesive version in different colours. 25 mm (1") width x 25 m (82') length
ACCESSORIES
ELASTIC LOOP TAPE SPLINT STRAP See full product range
Available in different widths and colours. Available in different lengths.
on the product overview pages.
45
ACCESSORIES | WORKING TOOLS
Art. N° 35061 - SHARP SCISSORS - CURVED (14 CM) Art. N° 35065 - STRONG SCISSORS Art. N° 35066 - GINGHER SHEARS
Slim design excellent for trimming orthoses. The stainless steel Strong cogged pair of scissors with return spring to cut sheets Voted best scissor in the world by the majority of the therapists.
blades are curved to make cutting around curves easy. from 2 mm (1/12") to 4.2 mm (3/16"). Scissor length: 20 cm - 7 7/8"
Surgical grade instrument.
Scissor length: 14 cm - 5 33/64"
46
ACCESSORIES | WORKING TOOLS
Art. N° 35134 - CHROME PLATED EYELET SETTER Art. N° 35307 - DEBURRING KNIFE Art. N° 35105 - DYNAMOMETER
To set eyelets in leather, fixation straps and Orfit To smoothen orthosis edges. Ideal to finish orthoses made of non-perforated Accurate dynamometer, max. 600 g.
1.6 mm - 1/16" and 2 mm - 1/12". material in a fast and efficient way. Two blades are inside the handle. Ideal to measure static and dynamic orthosis tractions.
Art. N° 35137: 200 eyelets of 4 mm (1/6” diameter) Art. N° 35307B10: 10 spare blades with straight cut A ring is attached to one end, a clip to the other.
Art. N° 35307B20: 10 spare blades with oblique cut
ACCESSORIES
Art. N° 35003G - YELLOW MARKER Art. N° 35003Z - BLACK MARKER Art. N° 35003W - WHITE MARKER
This special marker allows drawing a pattern on the splinting This special marker allows drawing a pattern on the splinting This special marker allows drawing a pattern on the splinting
material that is indelible even in water, but is easily wiped off. material that is indelible even in water, but is easily wiped off. material that is indelible even in water, but is easily wiped off.
Art. N° 35003G/1 - Refill Yellow Marker Art. N° 35003Z/1 - Refill Black Marker Art. N° 35003W/1 - Refill White Marker
47
ACCESSORIES | PADDING AND LINING
Art. N° 35110 - LUXOFOAM NON PERFORATED Art. N° 35112 - LUXOFOAM PERFORATED Art. N° 35111 - ORFILASTIC
Luxofoam is a self-adhesive soft PVC foam used for padding of small Sizes: 49 cm x 97 cm x 3 mm (19 3/10” x 38 1/5” cm x 7/64”) Orfilastic is a terrycloth lining material with a backing of
surfaces. It does not detach when heated in water, and can therefore self-adhesive open cell foam. Used for covering large orthosis
be used for prepadded orthosis applications. surfaces to prevent and absorb perspiration.
Sizes: 49 cm x 97 cm x 3 mm (19 3/10” x 38 1/5” x 7/64") Easily removable with lukewarm water.
Sizes: 50 cm x 1 m x 3 mm (20” x 39 2/5” x 7/64”)
Art. N° 35117 - ORFILASTIC BLACK Art. N° 360201N.ST1 - EDGING STRIP NATURAL COLOUR Art. N° 35116 - SOFT VELVET EDGING STRIP BLACK
Orfilastic Black is a terrycloth lining material with a backing of self- Thin low temperature thermoplastic lining material. Thin, soft, stretchable, elastic and self-adhesive textile lining material.
adhesive open cell foam. Used for covering large orthosis surfaces to Sizes: 0,8 mm x 20 mm x 3000 mm (0 1/32" x 3/4" x 118 1/10”) Sizes: 1 mm x 25 mm x 2500 mm (1/25" x 1" x 8’ 2.5”)
prevent and absorb perspiration. Easily removable with lukewarm water.
Sizes: 50 cm x 1 m x 3 mm (20” x 39 2/5” x 7/64”)
48
ACCESSORIES | HEATING DEVICES
WATER BATHS
ACCESSORIES
Large water bath in stainless steel.
Inner dimensions: 740 L x 540 W x 100 H mm
Temperature range: 60°C - 90°C
Water content: approximately 30 litre
Integrated faucet facilitates regular Excellent temperature control and Attached lid to maintain temperature Integrated anti-drip edge Grid with high and accessible
draining and replacing of water. temperature uniformity with a digital and reduce evaporation. The hinged lid on the inside of the lid. handles provides easy and safe
display and timer. with handle can be placed in an open loading and removal of products.
position.
49
ACCESSORIES | HEATING DEVICES
DRY HEATER
Heat surface dimensions: 438 L x 318 W mm
32503/230EU 230V EU
32503/230UK 230V UK
32503/230CH 230V CH
ACCESSORIES
Ideal to heat precise areas
on small and large thermoplastic
orthoses to attach outriggers
and straps or to make detailed
corrections.
51
EDUCATION AND INFORMATION | USER TIPS
52
EDUCATION AND INFORMATION | MAINTENANCE
EDUCATION AND
INFORMATION
53
EDUCATION AND INFORMATION | MATERIAL PROPERTIES
Properties Thickness
Elastic Low stretch Flexible On a roll 1.6 mm 2.0 mm 2.4 mm 2.5 mm 3.2 mm 4.2 mm Available Transparent
in pre-cuts when activated
Orficast® ■
Orfit® NS Soft ■ ■ ■ ■ ■ ■ ■
Orfit® NS Stiff ■ ■ ■ ■
Orfit® Colors NS ■ ■ ■ ■
Orfilight® NS ■ ■ ■ ■ ■
Orfilight® Black NS ■ ■ ■ ■ ■
Aquafit™ NS Soft ■ ■ ■ ■ ■
Aquafit™ NS Stiff ■ ■ ■
Tecnofit™ ■ ■ ■ ■
Orfizip® Light NS ■ ■ ■ ■
Multifit® NS ■ ■ ■
Orfit® Eco ■ ■ ■ ■
Orfibrace™ NS ■ ■ ■
Orfit® Crystal NS ■ ■ ■ ■
54
EDUCATION AND INFORMATION | MATERIAL PROPERTIES
Low Medium High Low Moderate High Full Low Moderate High Non-stick Activation Working Hardening
Coating Temperature time time
■ ■ ■ ■ 65°C-149°F
EDUCATION AND
INFORMATION
55
EDUCATION AND INFORMATION | TEXTBOOKS
TEXTBOOKS
Art. N° 21021E - THE SPLINTING GUIDE Art. N° 52013 - ORTHOTIC DESIGN AND FABRICATION FOR THE UPPER EXTREMITY
Compiled by Paul Van Lede OT, MS. A Practical Guide by Orfit Product Specialist Debby Schwartz and Drs. Katherine Schofield covers
> Static hand orthoses. foundational knowledge for the use of orthoses as an intervention in occupational therapy practice.
The combination of illustrations, text and instructional video material makes Orthotic Design and
> Dynamic hand orthoses.
Fabrication for the Upper Extremity a valuable resource for occupational therapy students, new graduates,
and novice clinicians.
56
EDUCATION AND INFORMATION | ORFIT ONLINE
EDUCATION AND
INFORMATION
www.linkedin.com/showcase/orfit-splinting-&-physical-rehabilitation
Follow us on Linkedin for company news, press releases,
and relevant industry news.
Art. N° 21021E - THE SPLINTING GUIDE
Download available on www.instagram.com/orfitindustries/
www.orfit.com/physical-rehabilitation/ Follow us on Instagram for quick and interesting product updates.
accessories/the-splinting-guide/
www.pinterest.com/orfitindustries
Follow us on Pinterest for orthotic pictures and splinting tutorials. 57
PRODUCT OVERVIEW
Black 4036Z
Orange 4036OR
ORFICAST®
6 CM
ORFICAST® MORE
12 CM
ORFICAST® 6 CM - LENGTH 3 M
58
PRODUCT OVERVIEW
30 CM
maxi perfo
mini perfo
8334.SO3
8334.SO4
8354.SO3
8354.SO4
OVERVIEW
PRODUCT
59
PRODUCT OVERVIEW
ORFIT® CLASSIC PRE-CUTS (packed per 2 pieces) ORFIT® CLASSIC PRECUTS (packed per 2 pieces)
Size Art. N° Size Art. N°
GAUNTLET THUMB POST ORTHOSIS ANTI-SPASTIC ORTHOSIS + THUMB PIECE
Orfit Classic 1.6 mm (1/16”) micro perfo, soft small 35810 Orfit Classic 3.2 mm (1/8”) non perfo, stiff small 35870
medium 35811 medium 35871
large 35812 large 35872
COMPLETE THUMB ORTHOSIS INTRINSIC ANTI-SPASTIC HAND ORTHOSIS
Orfit Classic 2.0 mm (1/12”) micro perfo, soft small 35900 Orfit Classic 3.2 mm (1/8”) mini perfo, stiff small 35910
medium 35901 medium 35911
large 35902 large 35912
WRIST + THUMB ORTHOSIS
ULNAR DRIFT ORTHOSIS
Orfit Classic 2.0 mm (1/12”) micro perfo, soft small 35814
Orfit Classic 3.2 mm (1/8”) mini perfo, stiff left 35817KL
medium 35815
right 35817KR
large 35816
INTRINSIC RESTING HAND ORTHOSIS
GAUNTLET IMMOBILIZATION ORTHOSIS
Orfit Classic 3.2 mm (1/8”) non perfo, stiff small 35850
Orfit Classic 2.0 mm (1/12”) micro perfo, soft small 35830
medium 35851
medium 35831
large 35852
large 35832
RHEUMATOID ARTHRITIS RESTING ORTHOSIS
DORSAL COCK-UP ORTHOSIS
Orfit Classic 3.2 mm (1/8") mini perfo, stiff small 35840
Orfit Classic 3.2 mm (1/8”) non perfo, stiff x-small 35818
medium 35841
small 35820
large 35842
medium 35821
large 35822
60
PRODUCT OVERVIEW
ORFIT® NS ORFIT®
COLORS NS
1.6 mm (1/16”) non perfo 8332.SO1/NS 2.0 mm (1/12”) non perfo Violet 8133PU.1/NS
maxi perfo 8334.SO3/NS 8354.SO3/NS 2.0 mm (1/12”) micro perfo Violet 8133PU.2/NS
OVERVIEW
PRODUCT
61
PRODUCT OVERVIEW
ORFIT® ORFIT®
COLORS NS COLORS NS
PRE-CUTS
Dominant Black 35900Z/NS 35901Z/NS 35902Z/NS
Dominant Black 35830Z/NS 35831Z/NS 35832Z/NS
Dominant Black 35814Z/NS 35815Z/NS 35816Z/NS
62
PRODUCT OVERVIEW
OVERVIEW
PRODUCT
63
PRODUCT OVERVIEW
ORFILIGHT® NS ORFILIGHT® NS
PRE-CUTS PRE-CUTS
ORFILIGHT® NS PRE-CUTS (packed per 2 pieces) ORFILIGHT® NS PRE-CUTS (packed per 2 pieces)
Orfilight NS 2.5 mm (3/32") micro perfo small 35840/L Orfilight NS 3.2 mm (1/8”) non perfo x-small 35818/L
Orfilight NS 1.6 mm (1/16”) micro perfo small 35810/L Orfilight Black NS 3.2 mm (1/8”) non perfo small 35820Z/L/NS
medium 35815Z/L/NS
large 35816Z/L/NS
64
PRODUCT OVERVIEW
AQUAFIT™ NS TECNOFIT™
1.6 mm (1/16") non perfo 8632N.1/NS 2.5 mm (3/32”) non perfo 8738.1
micro plus perfo 8639N.2+/NS 3.2 mm (1/8”) non perfo 8734.1 8754.1
Thickness Perforation 45 cm x 60 cm 60 cm x 90 cm
(mm-inch) types (17 11/16” x 23 5/8”) (23 5/8” x 35 3/8”)
OVERVIEW
PRODUCT
65
PRODUCT OVERVIEW
2.5 mm (3/32”) micro perfo small 39108N/25MI/L/NS 3.2 mm (1/8”) non perfo 7134.1/NS
medium 39112N/32MI/L/NS
MULTIFIT® NS - BLACK
large 39113N/32MI/L/NS
Thickness Perforation 45 cm x 60 cm 60 cm x 90 cm
(mm-inch) types (17 11/16” x 23 5/8”) (23 5/8” x 35 3/8”)
ORFIZIP® LIGHT NS ATOMIC BLUE
3.2 mm (1/8”) non perfo 7134Z.1/NS
Thickness Perforation Size Art. N°
(mm-inch) types non perfo 7154Z.1/NS
large 39110MB/25MI/L/NS
medium 39112MB/32MI/L/NS
large 39113MB/32MI/L/NS
66
PRODUCT OVERVIEW
ORFIT® ECO - SHEET MATERIAL ORFIT® ECO PRE-CUTS (packed per 2 pieces)
Thickness Perforation 45 cm x 60 cm 60 cm x 90 cm Size Art. N°
(mm-inch) types (17 11/16” x 23 5/8”) (23 5/8” x 35 3/8”)
DORSAL COCK-UP ORTHOSIS
2.4 mm (3/32") non perfo 8938N.1
Orfit Eco 3.2 mm (1/8”) non perfo x-small 35818/ECO
mini perfo 8938N.4
small 35820/ECO
3.2 mm (1/8") non perfo 8934N.1 8954N.1
medium 35821/ECO
mini perfo 8934N.4 8954N.4
large 35822/ECO
ORFIT® ECO BLACK NS - SHEET MATERIAL ANTI-SPASTIC ORTHOSIS + THUMB PIECE
Thickness Perforation 45 cm x 60 cm 60 cm x 90 cm Orfit Eco Black NS 3.2 mm (1/8”) mini perfo small 35870Z/ECO/NS
(mm-inch) types (17 11/16” x 23 5/8”) (23 5/8” x 35 3/8”)
medium 35871Z/ECO/NS
2.4 mm (3/32") non perfo 8938Z.1/NS
large 35872Z/ECO/NS
mini perfo 8938Z.4/NS
INTRINSIC ANTI-SPASTIC HAND ORTHOSIS
3.2 mm (1/8") non perfo 8934Z.1/NS 8954Z.1/NS
Orfit Eco Black NS 3.2 mm (1/8”) mini perfo small 35910Z/ECO/NS
mini perfo 8934Z.4/NS 8954Z.4/NS
medium 35911Z/ECO/NS
large 35912Z/ECO/NS
OVERVIEW
PRODUCT
67
PRODUCT OVERVIEW
ALLFIT™
Quantity Art. N°
68
PRODUCT OVERVIEW
DYNASYST™ DYNASYST™
Art. N° Art. N°
ORFITUBE ISOFORCE
Single Orfitube™ adjuster - 5 pcs. + Allen wrench 35304 Polyester monofilament thread 35315
Orfitube™ bending tool 35308 Elastic thread (max. resistance 200 g.) 35312
COILS AND SPRINGS Elastic thread (max. resistance 400 g.) 35313
Knuckle bender coil spring 35801 Elastic thread (max. resistance 600 g.) 35314
OVERVIEW
PRODUCT
69
PRODUCT OVERVIEW
Sharp Scissors - Curved (14 cm) 35061 Luxofoam non perforated 35110
Chrome plated eyelet setter 35134 Soft velvet edging strip (black) 35116
Dynamometer 35105
70
PRODUCT OVERVIEW
Standard loop strap - 25 mm (1”) 25 m(98 2/5”) white 35400L Standard loop strap - 50 mm (2”) 25 m (98 2/5”) white 35413L
black 35404L
SELF-ADHESIVE LOOP TAPE Colour Art. N°
fluo yellow 35402L
fluo pink 35403L Self-Adhesive loop tape - 50 mm (2”) 25 m (98 2/5”) white 35414L
beige 35416L
SELF-ADHESIVE LOOP TAPE Length Colour Art. N°
beige 35412L Standard hook strap - 50 mm (2”) 25 m (98 2/5”) white 35413H
beige 35415H
STANDARD HOOK STRAP Length Colour Art. N°
beige 35411H Self-adhesive hook tape - 50 mm (2”) 25 m (98 2/5”) white 35414H
black 35442H
SELF-ADHESIVE HOOK TAPE Length Colour Art. N°
Self-adhesive hook tape - 25 mm (1”) 25 m (98 2/5”) white 35405H
beige 35412H
blue 35406H
black 35409H
OVERVIEW
PRODUCT
71
PRODUCT OVERVIEW
beige 35439L
black 35432L
beige 35440L
black 35443L
SPLINT STRAP
Width Length Colour Art. N°
72
PRODUCT OVERVIEW
OVERVIEW
PRODUCT
73
www.orfit.com ORFIT INDUSTRIES
Art. N° 52000/1
Vosveld 9A | B-2110 Wijnegem | Belgium
08-06-2022
T (+32) (0)3 326 20 26
welcome@orfit.com
All rights reserved. No part of this publication may be produced, stored in a retrieval system Responsible editor:
or transmitted, in any way, form or by any means, electronic, mechanical, photocopying or otherwise, Steven Cuypers Groene Wandeling 58, B-2970 's-Gravenwezel
without prior written permission of Orfit Industries. D/2022/13.637/19