Professional Documents
Culture Documents
RX 65 Manual
RX 65 Manual
©2011 Beltronics.
Manufactured and Printed in Canada.
Beltronics Pro RX65 • 121RX65-2 U LT I M AT E R ADAR / L ASER / SAFET Y DETECTOR
Congratulations Quick Reference Card
The BEL Pro RX65 is the most advanced If you’ve used a radar detector before,
radar, laser and safety detector ever a review of the Quick Reference Guide on
designed by Beltronics. pages 4 and 5, and the Programming
The BEL RX65 includes full X, K, information on pages 12 and 13 will briefly
SuperWide Ka, and Safety Warning System explain the new features.
radar capability, front and rear laser If this is your first detector, please read
detection, digital signal processing (DSP) the manual in detail to get the most out of Remove card along perforations
for superior range and reduced false your RX65’s outstanding performance and
alarms, our patented Mute and AutoMute, innovative features. BEL Pro RX65 Quick Reference Card
audible and visual band alerts, and all the Please drive safely.
performance you’d expect from Beltronics. There are 7 user-selectable options so you
can customize your RX65 for your own
An example
Here is how you would turn RX65’s
In addition, the BEL RX65 introduces FCC Note: preferences. AutoMute feature off.
a new level of revolutionary performance Modifications not expressly approved by The buttons labeled CITY and BRT
are also used to enter the Program Mode, 1 Enter the Program Mode by holding
and innovative features. the manufacturer could void the user’s REVIEW your current program settings, both the CITY and BRT buttons down for 2
and to CHANGE any settings as desired. seconds. RX65 will beep twice and display
• Superior long-range radar and laser FCC granted authority to operate the The words PROGRAM, RVW and CHG are Program.
detection, including new “POP” equipment. located on the top of the detector, and are
highlighted in graphics. 2 Then hold the RVW button down. The
mode alert RX65 will scroll through the categories,
• Advanced Programming lets you How to use Programming starting with Pilot (Pilot), then Voice
To begin using your RX65, QuickMount Slot Radar Antenna and Laser Lens Rear Laser Port
Insert RX65’s adjustable Windshield mount The rear panel of your RX65 should have Receives laser signals from behind the
just follow these simple steps into this slot. Page 7 a clear view of the road ahead. For best vehicle.
performance, do not mount the RX65
1 Plug the small end of the power cord
QuickMount Button directly behind windshield wipers Earphone Jack
into the side jack of the detector, and
Press the button, and slide the Windshield or tinted areas. Page 6 Accepts standard 3.5mm MONO earphone.
plug the large end of the power cord
mount into one of its four locking positions.
into your car’s lighter socket.
Page 7 Brightness Button
Press to adjust display brightness.There are
2 Mount your RX65 on the windshield
City Button three brightness settings, plus Dark Mode.
using the supplied windshield mount.
Switches between AutoScan, City and In the Dark Mode, the power-on
Highway, settings. In general, we indication will be changed to a dim “AD,”
3 Press the PWR button, located top left,
recommend AutoScan. Page 8 “HD,” or “CD” (indicating AutoScan, Dark,
to turn RX65 on.
Highway Dark, or City Dark). In the Dark
Power Button Mode, RX65’s meter will not display during
4 Press and hold the Volume/Mute
Press the PWR button to turn the RX65 on an alert, only the audio will alert you.
button to adjust the volume.
or off. Page 8 Page 9
Please read the manual to fully understand
AutoMute Power Jack
RX65’s operation and features.
RX65’s patented AutoMute automatically Plug the SmartPlug into this connector.
reduces the volume level of the audio alert Alphanumeric Matrix Display Pages 6
after a brief period. Page 8. If you prefer, RX65’s display will show Highway,
you can turn AutoMute off. Page 8 AutoScan, or City as its power-on indication. Volume / Mute Button
If you prefer, you can choose other power- Press and hold to adjust the volume level.
Programming on indications. Page 12-14 Briefly press this button (above the
RX65 is ready to go, just plug it in and During an alert, the display will display) to silence the audio for a specific
turn it on. But you can also easily change 8 indicate radar band, and a precise bar graph alert. Page 8
features for your preferences. Page 12-16 of signal strength. Page 10
NOTE: In the Dark Mode the display
will not light during an alert. Page 9
The display can also show Safety Radar
text messages. Page 22-23
4 5
Installation
6 7
Controls and Features
Power On/Off If you prefer, you can turn the You can also select conventional Audible Alerts
To turn the RX65 on, press the PWR button AutoMute feature off. See the Programming Highway and City modes.When driving in
on the left side of the top case.When section for details. urban areas where annoying X-band For Radar signals:
you turn the RX65 on, it goes through a intrusion alarms and door openers are RX65 uses a Geiger-counter-like sound
sequence of alerts. Volume / Mute Button common, City mode can be engaged to to indicate the signal strength and type of
If you prefer, you may program your To adjust the alert tone volume, press and lower X-band sensitivity and reduce X-band radar signal being encountered.
RX65 for a shorter power-on sequence. See hold the Volume/Mute bar located on the alerts. Full sensitivity is maintained on all When you encounter radar, a distinct
the Programming section for details. top case. other bands.You can customize RX65’s City audible alert will sound and occur faster as
The Mute button, located on RX65’s mode sensitivity. See the Programming the signal gets stronger.This allows you to
Voice top case, allows you to silence the audio section for details. judge the distance from the signal source
The RX65 has our Digital Voice alert during a radar encounter. without taking your eyes from the road.
feature, which provides a digital voice To mute the audio for a single specific Brightness Button Each band has a distinct tone for easy
announcement of the band being detecting. signal, briefly press the Volume/Mute RX65’s BRT button selects the brightness identification.
If you prefer, you can turn the Digital button.After that radar encounter has of RX65’s display.There are four settings: X-band = chirping tone
Voice feature off in programming. See passed, the mute will automatically reset Maximum, Medium, Minimum, and Dark. K-band = buzzing tone
Programming section for details. and the audio will alert you to the next Press the BRT button to select your Ka-band = double-chirp tone
encounter. preferred brightness.
Power-on indication For Laser signals:
After RX65’s start-up sequence is complete, Highway / AutoScan / City Switch Dark Mode Since laser signals are a possible threat
the alphanumeric display will show The City button selects RX65’s sensitivity When you select the Dark mode with the no matter how weak, RX65 alerts you to all
Highway, City, or AutoScan to indicate mode.We recommend the AutoScan mode BRT switch, RX65 changes to a very laser signals with a full laser alert.
which sensitivity mode is selected. for most driving. inconspicuous power-on indication: a very
If you prefer, you can select alternate RX65’s AutoScan mode provides long- BRT AD, HD, or CD. (In this display, the A, H, For Safety signals:
power-on displays. See the Programming range warning, with minimum false alarms. or C indicates AutoScan, Highway, or City, RX65 will alert you to these signals
section for details. In this mode, RX65’s internal computer and the D indicates Dark.) with a double-buzz tone (and digital voice
continuously analyzes all incoming signals When RX65 is in the Dark mode, the if programmed) with a corresponding text
AutoMute and intelligently adjusts the sensitivity. display will not show visual alerts when message.A complete listing of the text
Your RX65 has our patented AutoMute RX65 detects signals. Only the audible alert messages is on page 23.
feature.After RX65 alerts you to a radar will tell you of detected signals.
encounter at the volume you have selected,
the AutoMute feature will automatically
reduce the volume to a lower level.This
keeps you informed without the annoyance
of a continuous full-volume alert.
8 9
Controls and Features
Power Connector Signal Strength Meter Threat Display A few more examples will help you
RX65’s power jack uses a telephone-type RX65’s alphanumeric display consists of RX65’s Threat Display option is an better see how the Threat Display works.
connector.This new 6-pin connector only 280 individual LEDs, to provide an intuitive advanced display for experienced detector
works with the included coiled SmartPlug, ultra-bright display of signal strength and users. Please use RX65 for a few weeks to K9 X1
or the optional Direct-wire SmartPlug. text messages. get familiar with its other features before Here Threat Display shows a strong
The coiled SmartPlug is a special RX65’s standard bar-graph signal using Threat Display. K-band signal, and a weak X-band signal.
power cord that has a power-on indicator strength meter only displays information To use the Threat Display instead
(which only lights up when the RX65 is on of the bar graph signal strength meter, Ka1 X9
turned on), a bright alert light that warns a single radar signal. If there are multiple you must select Threat Display in RX65’s Here Threat Display shows a weak
of radar or laser, and a convenient mute signals present, RX65’s internal computer Programming (see pages 12-15). Ka-band signal, and a strong X-band
button right on the plug. It’s perfect for any determines which is the most important RX65’s Threat Display simultaneously signal.
car where reaching the detector’s mute threat to show on the bar-graph meter. tracks multiple radar signals and their
button on the windshield is a stretch. When RX65 detects radar, it displays relative signal strength. Threat Display Details
For discreet night driving, put RX65 the band (X, K, or Ka), and a precise bar Threat Display can help you The band designators (X, K, Ka) will
in the Dark mode, and use the SmartPlug graph of the signal strength.When RX65 spot a change in your normal driving stay on the display for a few seconds after
for your visual alerts. Other drivers won't detects a laser signal, the display will show environment; for example, a traffic radar the signal has passed.This allows you to see
know you have a detector. “Laser.” unit being operated in an area where there what the unit detected, even on very brief
An optional Direct-wire SmartPlug NOTE: If you are operating RX65 in the are normally other signals present. signals.
is also available.This version includes a Dark mode, the display will not light when The Threat Display is actually a
small display module, which can be wired a signal is detected – only the audio alert miniature spectrum analyzer. It shows what
directly into your electrical system, with a will be heard, and the flashing alert lamp on band each signal is and its signal strength. Tech Display
10 foot straight cord to route to your RX65. the SmartPlug. BEL RX65’s new Tech Display option is also
For more information or to order, call Ka9 K2 X1 for the experienced detector user. In this
us toll-free at 1-800-341-2288. Above is the Threat Display if the mode, RX65 will display the actual numeric
RX65 was detecting a strong Ka-band, a frequency of the radar signal being
weak K-band, and a weak X-band signal. received.
NOTE: If you use Threat Display,
the brief signal shown in the power-on K 24.150
sequence when you turn on your RX65 Tech Display shows one K-band
will also be in Threat Display: an X with a signal at 24.150 gigahertz.
decaying numeric signal. NOTE: Even long-time detector users
will require a significant amount of time to
get familiar with this new level of
information about detected signals.
10 11
Programming Overview of Programming
There are 7 user-selectable options so you An example Press the REVIEW button Press the CHANGE button
can customize your RX65 for your own Here is how you would turn RX65’s to go from one category to change your setting
preferences.The buttons labeled CITY and AutoMute feature off. to the next within a category
BRT are also used to enter the Program
Mode, REVIEW your current program 1 Enter the Program Mode by holding PILOT Pilot HWY * Full word: Highway, AutoScan or City
(Power-on indication) Pilot H Letter: H or A or C
settings, and to CHANGE any settings as both the CITY and BRT buttons down for Pilot V Vehicle voltage
desired.The words PROGRAM, RVW, and 2 seconds. The RX65 will beep twice and
CHG are located on the top of the detector, display Program. VOICE Voice ON * Voice alerts on
and are highlighted in colored graphics. Voice OFF Voice alerts off
Pages 14-16 explain each option in more 2 Then hold the RVW button down. The
detail. RX65 will scroll through the categories, POWER-ON SEQUENCE PwrOn STD * Standard power-on sequence
starting with Pilot (Pilot), then Voice PwrOn FST Fast power-on sequence
How to use Programming (Voice), then Power-on sequence SIGNAL STRENGTH METER Meter STD * Standard signal strength meter
1 To enter Program Mode, press and (PwrOn), then Signal strength meter Meter THT Threat Display
hold the CITY and BRT buttons for 2 (Meter), and then AutoMute (aMute). Meter TEC Tech Display
seconds. The unit will beep twice, and will
display the word Program. 3 Release the RVW button when RX65 AUTOMUTE aMute ON * AutoMute on
shows the AutoMute item. Since the factory aMute OFF AutoMute off
2 Then press the RVW button to setting is for AutoMute to be on, RX65 will
CITY MODE SENSITIVITY City STD * Standard City mode sensitivity
review the current settings.You can display aMute ON. City LoX Low X band sensitivity in City Mode
either tap the button to change from item If you accidentally don’t release the City NoX No X band sensitivity in City Mode
to item, or hold the button to scroll through RVW button in time, and the RX65 goes
the items. to the next category, hold the RVW button BANDS Bands ALL * Default bands
down again, and after RX65 scrolls Bands MOD One or more bands are disabled
3 Press the CHG button to change through all categories, it will begin again
any setting. You can either tap the button at the top of the list. Turn bands “ON” or “OFF” by
to change from setting to setting, or hold pressing the VOLUME/MUTE button
the button to scroll through all the options. 4 Press the CHG button to change from
aMute ON to aMute OFF.
* Factory Default Settings X ON or OFF
To reset RX65 to its original factory K ON or OFF
4 To leave the Program Mode, settings, press and hold the “CITY” Ka USA or Intl or OFF
simply wait 8 seconds without 5 To complete the Programming, simply and “BRT” buttons while turning POP ON or OFF
pressing any button. The unit will display wait 8 seconds without pressing any the power on.The RX65’s display LSR ON or OFF
Complete, beep 4 times, and return to button. The RX65 will display Complete, will provide a Reset message, SWS ON or OFF
normal operation. beep 4 times, and return to normal accompanied by an audible alert, TSR ON or OFF (Default is ON)
operation. acknowledging the reset.
12 13
Details of Programming
Pilot (Power-on indication) Voice Signal Strength Meter City Mode Sensitivity
NOTE:When you are using the Dark mode, Voice On (Voice alerts on) MeterSTD (Standard meter) City STD (Standard)
the display will only show HD,AD, or CD, In this setting, all radar, laser, and SWS (if In this setting, the meter displays the band In this setting, when you put RX65 in the
(Highway-Dark,AutoScan-Dark, or City- programmed on) alerts will be of the received signal, and a bar graph City mode, X-band sensitivity is significantly
Dark). accompanied by a digital voice. shows the relative signal strength. (factory reduced, to reduce annoyance from X-
default) band intrusion alarms and motion sensors.
Pilot HWY (Full description) Voice Off (Voice alerts off) (factory default)
In this setting, RX65 will display “Highway,” In this setting, only the audio tones will be MeterTHT (Threat Display)
“City,” or “Auto” as its power-on indication. heard during an alert or SWS message. In this setting, the meter simultaneously City LoX (Low X band sensitivity)
(factory default) tracks multiple radar signals, including In this setting, when you put RX65 in the
Power-on Sequence relative signal strength for each. City mode, X-band sensitivity is reduced
Pilot H (Letter) PwrOnSTD (Standard) NOTE:The Threat Display feature is more than the standard setting.This will
In this setting, RX65 will display “H” for In this setting, each time you turn on the explained in more detail on pages 10-11. reduce X band alarms from other sources
Highway,“C” for City, and “A” for AutoScan. RX65, it will display “BEL RX65,”“Laser,”“Ka- even further, but also significantly reduces
band,”“K-band,”“X-band,”“Safety,” and any MeterTEC (Tech Display meter) range to X band traffic radar.
Pilot V (Vehicle voltage) changes to factory settings. (factory default) In this setting, the meter displays the actual
In this setting, RX65 will continually display numeric frequency of the radar signal City NoX (No X band sensitivity)
“H” for Highway,“C” for City, and “A” for PwrOnFST (Fast power-on) received. In this setting, when you put RX65 in the
AutoScan, and the vehicle’s voltage. If the In this setting, the RX65 will only provide a NOTE:The Tech Display feature is City mode, it will not respond to any X
vehicle’s voltage drops below 10.5 volts, a brief audible tone, and will display any non- explained in more detail on page 11. band signals. WARNING: Only choose
low voltage warning is displayed, followed factory settings. this setting if you are absolutely
by an audible alert.A high voltage warning AutoMute certain that there are no X band traffic
is also given if the voltage goes above 16.0 aMute ON (AutoMute on) radar units where you drive.
volts.The high-voltage warning is also In this setting, RX65’s audio alerts will
followed by an audible alert. initially be at the volume you set, but after NOTE:These settings only apply when
a few seconds, the RX65 will automatically RX65 is operated in City mode. X-band
reduce the volume level, to keep you sensitivity is not affected when used in
informed, but not annoyed. (factory default) “AutoScan,” or “Highway” modes.
14 15
Details of Programming Technical Details
Power Requirement
• 12VDC, Negative Ground
• SmartPlug (included)
16 17
Technical Details
18 19
Technical Details
How Radar Works Radar range also depends on the How Laser (Lidar) Works There are limitations to LIDAR equip-
Traffic radar, which consists of microwaves, power of the radar equipment itself. Laser speed detection is actually LIDAR ment. LIDAR is much more sensitive to
travels in straight lines and is easily The strength of the radar unit’s beam (Light Detection and Ranging). LIDAR weather conditions than RADAR, and a
reflected by objects such as cars, trucks, diminishes with distance.The farther the guns project a beam of invisible infrared LIDAR gun’s range will be decreased by
even guardrails and overpasses. Radar radar has to travel, the less energy it has for light.The signal is a series of very short anything affecting visibility such as rain,
works by directing its microwave beam speed detection. infrared light energy pulses, which move, fog, or smoke.A LIDAR gun cannot operate
down the road.As your vehicle travels into Because intrusion alarms and motion in a straight line, reflecting off your car and through glass and it must be stationary in
range, the microwave beam bounces off sensors often operate on the same returning to the gun. LIDAR uses these light order to get an accurate reading. Because
your car, and the radar antenna looks for frequency as X-Band radar, your RX65 pulses to measure the distance to a vehicle. LIDAR must have a clear line of sight and
the reflections. Using the Doppler Principle, will occasionally receive non-police radar Speed is then calculated by measuring how is subject to cosine error (an inaccuracy,
the radar equipment then calculates your signals. Since these X-Band transmitters are quickly these pulses are reflected given the which increases as the angle between the
speed by comparing the frequency of usually contained inside of a building, or known speed of light. gun and the vehicle, increases) police
the reflection of your car to the original aimed toward the ground, they will LIDAR (or laser) is a newer technology typically use LIDAR equipment parallel to
frequency of the beam sent out. generally produce much weaker readings and is not as widespread as conventional the road or from an overpass. LIDAR can be
Traffic radar has limitations, the most than will a true radar encounter.As you radar, therefore, you may not encounter used day or night.
significant of these being that it typically become familiar with the sources of these laser on a daily basis.And unlike radar
can monitor only one target at a time. If pseudo alarms in your daily driving, they detection, laser detection is not prone to
there is more than one vehicle within will serve as confirmation that your RX65’s false alarms. Because LIDAR transmits a
range, it is up to the radar operator to radar detection abilities are fully much narrower beam than does radar, it is
decide which target is producing the operational. much more accurate in its ability to distin-
strongest reflection. Since the strength of guish between targets and is also more
the reflection is affected by both the size How “POP” Works difficult to detect. AS A RESULT, EVEN
of the vehicle and its proximity to the “POP” mode is a relatively new feature for THE BRIEFEST LASER ALERT SHOULD
antenna, it is difficult for the radar operator radar gun manufacturers. It works by BE TAKEN SERIOUSLY.
to determine if the signal is from a sports transmitting an extremely short burst,
car nearby or a semi-truck several hundred within the allocated band, to identify
feet away. speeding vehicles in traffic. Once the target
is identified, or “POPPED,” the gun is then
turned to its normal operating mode to
provide a vehicle tracking history, (required
by law).
20 21
Technical Details
TSR Traffic Signal Rejection How Safety Radar Works SWS Text Messages Weather Related Hazards
Your radar detector includes a new Safety Warning System, or SWS, uses a Highway Construction or Maintenance 33 High Wind Ahead
optional boost in anti-falsing software to modified K-band radar signal.The SWS safety 1 Work Zone Ahead 34 Severe Weather Ahead
eliminate excessive alerts from erroneous X radar system has 64 possible messages (60 2 Road Closed Ahead/Follow Detour 35 Heavy Fog Ahead
and K-band sources. One example of this is currently allocated).The SWS messages 3 Bridge Closed Ahead/Follow Detour 36 High Water/Flooding Ahead
traffic flow monitoring systems.These your RX65 can display are listed on the 4 Highway Work Crews Ahead 37 Ice On Bridge Ahead
systems, which are becoming more widely facing page. 5 Utility Work Crews Ahead 38 Ice On Road Ahead
used in several countries, generate K-band From the factory, your RX65 is 6 All Traffic Follow Detour Ahead 39 Blowing Dust Ahead
signals to measure the flow of traffic on a programmed with SWS decoding OFF. If 7 All Trucks Follow Detour Ahead 40 Blowing Sand Ahead
given road. Unfortunately most detectors SWS is used in your area, your RX65 will 8 All Traffic Exit Ahead 41 Blinding Snow Whiteout Ahead
see this as a real threat and will display the safety messages associated with 9 Right Lane Closed Ahead 42 For future use
alert you to it unnecessarily. Our the signal. If you wish to detect this system, 10 Center Lane Closed Ahead Travel Information/Convenience
new proprietary software (TSR), use the Programming feature to turn 11 Left Lane Closed Ahead 43 Rest Area Ahead
intelligently sorts, ranks and rejects this RX65’s SWS decoding ON. 12 For future use 44 Rest Area With Service Ahead
type of false alarm automatically.The result NOTE: Some of the safety messages Highway Hazard Zone Advisory 45 24 Hour Fuel Service Ahead
is ultimate protection without excessive have been condensed, so that each message 13 Stationary Police Vehicle Ahead 46 Inspection Station Open
false alarms. can be displayed on one or two screens on 14 Train Approaching/At Crossing 47 Inspection Station Closed
The TSR software is turned on by RX65’s eight-character display. 15 Low Overpass Ahead 48 Reduced Speed Area Ahead
default in the Programming section of your Since Safety radar technology is 16 Drawbridge Up 49 Speed Limit Enforced
detector. If you believe this type of system relatively new, and the number of 17 Observe Drawbridge Weight Limit 50 Hazardous Materials Exit Ahead
isn’t used in your area, you can simply turn transmitters in operation is not yet 18 Rock Slide Area Ahead 51 Congestion Ahead/Expect Delay
it off. Otherwise, your detector is ready to widespread, you will not receive Safety 19 School Zone Ahead 52 Expect 10 Minute Delay
start protecting you right out of the box. signals on a daily basis. Do not be surprised 20 Road Narrows Ahead 53 Expect 20 Minute Delay
If you have any questions about this if you encounter emergency vehicles, road 21 Sharp Curve Ahead 54 Expect 30 Minute Delay
new feature, please give us a call or visit our hazards and railroad crossings that are 22 Pedestrian Crossing Ahead 55 Expect 1 Hour Delay
website for more details. unequipped with these transmitters.As 23 Deer/Moose Crossing 56 Traffic Alert/Tune AM Radio
Safety transmitters become more prevalent 24 Blind/Deaf Child Area 57 Pay Toll Ahead
(the number of operating transmitters 25 Steep Grade Ahead/Truck Use Low Gear 58 Trucks Exit Right
is growing every day), these Safety radar 26 Accident Ahead 59 Trucks Exit Left
signals will become more common. 27 Poor Road Surface Ahead 60 For future use
For more information and details 28 School Bus Loading/Unloading Fast/Slow Moving Vehicles
about SWS safety radar, visit their web site 29 No Passing Zone 61 Emergency Vehicle In Transit
at www.safetyradar.com. 30 Dangerous Intersection Ahead 62 Police In Pursuit
31 Stationary Emergency Vehicle Ahead 63 Oversize Vehicle In Transit
32 For future use 64 Slow Moving Vehicle
22 23
Troubleshooting
RX65 did not provide a Safety • Safety transmitters may not be commonly used in your area. CD Sensitivity control is in City mode, display is in Dark mode (page 9)
signal while within range of an
emergency vehicle. No display RX65 is in the Dark mode, and is programmed for Dark All (page 9)
RX65’s display is not working. • Press the BRT button to deactivate Dark Mode. PilotHWY One of the many programming messages (pages 12-16)
RX65’s audible alerts are less loud • RX65 is in AutoMute Mode. See page 8 for details. WorkZone One of the many Safety Radar messages (pages 22-23)
after the first few alerts.
RX65 bounces or sags on • RX65 is not making contact with the windshield to provide
Caution RX65 has detected a Safety Radar Signal, but the signal isn’t yet strong
enough to decode the specific safety message (page 22-23)
windshield. stability.While holding down RX65’s QuickMount button,
slide RX65 toward the windshield so that the back top edge
makes firm contact. X5, or K5, RX65 has been programmed in the Threat Display mode (page 10-11)
or KA9 etc.
RX65’s power-on sequence • A loose power connection or dirty lighter socket can cause
reoccurs while you are driving. RX65 to be briefly disconnected.
VG2 RX65 has detected a VG2 unit (radar detector detector)
Your 14-year old son has changed You can return all of the programming options to the factory
all 7 of the Programming options. defaults by holding down the CITY and BRT buttons while
you turn RX65 on.
24 25
Service
If you did not purchase your detector directly from BELTRONICS, please fill out this section and return to us,
Serial Number__________________
Address______________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
Phone Number (In case we have a question)_____________________________________________
First Name:___________________ Middle Initial____ Last Name__________________________
If you purchased your detector directly from BELTRONICS, you do not need to fill this out.
1 Check the troubleshooting section of Representative. If the detector has been
this manual. It may have a solution to your damaged, abused or modified, the repair
problem. cost will be calculated on a parts and labor
basis. If it exceeds the basic repair charge,
@
www.
2 Call us at 1-800-341-2288.We may be you will be contacted with a quotation.
able to solve your problem over the phone. If the additional payment is not received
beltronicspro
RX65 to the factory for repair, we will choose not to have your RX65 repaired
Blue
provide you with a Service Order Number, at the price quoted), your RX65 will be
which must be included on the outside of returned, without repair. Payment can be
Red
Enclose the following information with Ship RX65 and Power Cord To:
your RX65:
• Your Service Order Number BELTRONICS
• Your name and return address Customer Service Department
1.
2.
3.
4.
26 27
Warranty and Accessories