Professional Documents
Culture Documents
Single component, moisture curing polyurethane, multi-use elastomeric joint sealant for
horizontal & vertical applications
TYPICAL APPLICATIONS
Skin formation time (23°C, 50% RH) <70 minutes
· Expansion and movement joints in floors and
Rate of cure in mm 24 hours (23°C,
walls 2-3mm
50% RH)
· Dynamically moving joints in concrete and Resistance to flow 23°C ISO 7390 < 3mm
masonry substrates 50°C ISO 7390 < 3mm
· Precast concrete joints Shrinkage (ISO 10563) < 10%
· Jersey barriers and similar
+5°C to
· Shopping malls and other pedestrian areas Temperature of application
+40°C
· Warehouses and light industrial factories
Specific gravity 1.25
· Schools, universities, galleries, office
buildings, hospitals, clinics etc. Shore A hardness ASTM C661 31-34
· Irrigation channels and water tanks (when
Tear strength (23°C / 50% RH) 6N/mm
used with suitable primer)
E-Modulus at 100% (23° C / 50% RH) 0.4N/mm²
ADVANTAGES Elongation at break (23° C / 50% RH) >500%
· Primer-free on dry concrete in non-
submerged conditions Elastic recovery (23° C / 50% RH) >70%
· Single component, easy to apply Vertical slump ASTM C639 Nil
· Non-shrink, non-sag, gun grade for vertical
Movement capability ASTM C719 ±25%
use
· Durable, resilient seal -40°C to
Service temperature
+70°C
· Can be over painted after curing when
No cracking
applied on concrete or blockwork substrates. Effects of accelerated Weathering
and loss of
· Forms a smooth blister free surface when ASTM C793-05 250 hours UV
adhesion
applied onto dry substrates
· Good resistance to dilute acids and alkalis
· Different colours available
MBS_CC-UAE/Sl_473U_11_17/v1
The technical information and application advice given in this Master Builders Solutions publication are based on
STATEMENT OF the present state of our best scientific and practical knowledge. As the information herein is of a general nature, no
RESPONSIBILITY assumption can be made as to a product's suitability for a particular use or application and no warranty as to its
accuracy, reliability or completeness either expressed or implied is given other than those required by law. The user
is responsible for checking the suitability of products for their intended use.
Field service where provided does not constitute supervisory responsibility. Suggestions made by Master Builders
NOTE Solutions either orally or in writing may be followed, modified or rejected by the owner, engineer or contractor since
they, and not Master Builders Solutions, are responsible for carrying out procedures appropriate to a specific
application.