Professional Documents
Culture Documents
Helmet shell size One-size-fits-all helmet shell concept; can be continuously adjusted to fit head
sizes 50–64 cm using the external, yellow coloured adjusting wheel in the
interior design at the back of the helmet
Shock absorption The shock absorption system consists of a hair net with 4-points-attachment
system composed by suspension straps and mesh webbing with leather edges.
• Hair net made from 50% Kermel and 50% viscose
• Suspension straps made of fireproof textiles combined with hook-and-
loop fastener
• Edging made of goatskin
Helmet colours Premium and Extend versions with painted helmet shell:
a) Standard colours:
b) Fluorescent colours:
White (RAL 9016) *
Red (RAL 3020) * Bright yellow (RAL 1026)
Yellow (1021) Bright orange (RAL 2008)
Signal blue (RAL 5026)
Black (RAL 9005) c) Luminescent colour:
White aluminium (RAL 9006)
Yellow green (RAL 6018) Luminescent
*Extend versions with front lamp adapter are available in these two colours only.
Basic version – mass dyed, unpainted helmet shell:
Basic versions:
The raw helmet shell material is dyed with pigment.
Interior design The helmet interior consists of the following subassemblies:
front and back retainer ring, head size adjustment system with carrier ring and
hand wheel, retention system (harness) and suspension system (hair net).
Ventilation system The ventilation system consists of 10 ventilation holes in the crown part of the
helmet shell with a sliding open-closing-mechanism which is continuously
adjustable. The ventilation holes are covered and additionally reinforced with
steel mesh.
• It ensures an optimum climate inside the helmet when the system is open.
• To prevent water, small particles, sparks and metal chips from entering, it
can be closed completely, if necessary.
Safety Goggles Heat and flame-resistant safety goggles with permanent anti-scratch and
1 permanent anti-fog coating, double-lens Pinlock® technology for highest
protection against fogging and scratching, approved according to EN
14458:2018 and EN 166:2001, available in the following versions:
• Version with silicone strap (1)
3 • Version with individual adjustable elastic strap (2)
• Version with the special and easy mounting system QuickConnect
2 including individual adjustable elastic band (3)
Polycarbonate Visor Removable external visor, made of 1,5 mm thick transparent polycarbonate,
(PC) mounted on a support made of ABS.
To protect the eyes and face against particles and fluids.
Specially shaped gasket on the support prevents the passage of water
between the helmet and the visor.
Approved according to EN 166.
Electro Visor (PC) Removable external visor, made of 2 mm thick transparent polycarbonate,
mounted on a support made of ABS.
To protect the eyes and face against electric arcs when working on high
voltage electrical systems.
Specially shaped gasket prevents the passage of water between the helmet
and the visor.
Approved according to EN 166.
Mesh Visor Removable external visor, made of a steel mesh, mounted on a support made
of ABS.
To protect eyes against shavings, cuttings and similar particles, e.g. during
work with a chainsaw.
Specially shaped gasket prevents the passage of water between the helmet
and the visor.
Approved according to EN 1731:2006.
Hearing Protection Passive earmuffs made entirely of high-quality, heat resistant plastic.
Ear protection against noise at medium to high frequencies.
Easy to attach to the helmet.
Simple, individual height adjustment via the temple.
For work in noisy environments, e.g. work with a chainsaw.
Approved according to EN 352-3.
Neck Protector • Neck protector made of aramid and antistatic blue fabric
• Protection of the user's neck and shoulder area
• Mounted to the helmet with fireproof Velcro® loops
Dräger HPS® 3500 • Very light-weight, high-performance helmet lamp with ATEX Zone 0
front lamp approval and mounted to the front part of the helmet
• Various light modes and angles of illumination
• Usable with HPS 3500 Extend versions with front lamp adapter only
Standard helmet • High performance lamps Dräger PX1 und Dräger PX1 Shorty with LED-
lamps technology and ATEX approval
• Adaptation to the helmet possible on left and/or right side via an adapter
with angle adjustment in three positions
• Adaption of various helmet lamp types and manufacturers possible via
different helmet lamp adapters, e.g. Dräger PX 1, UK 4AA, PeliLite 1800,
Adaro L-5 etc.
Back light • Optional LED back light as a warning and indicator light
HPS BuddyLight • Mounted to the back side of the helmet via an adapter with a bayonet-type
connector
• Seven modes in three colours (blue, white and red) that are either
continuously on/off or flashing
Reflective stripes / • Good visibility and thus increased safety in applications with poor visibility
Marking and labelling conditions
• Made of heat-resistant, highly flexible, durable and retro-reflective VizLite™
material
• Available in three different colours (red, yellow, grey-silver)
Helmet carrying bag The helmet carrying bags offers protection during transport and storage, have
an inner compartment and a business card pocket. They are made of
polyester, padded with velour and have a reinforced bottom.
The carrier bags are available in two sizes:
• large, for two helmets and accessories or
• small, for one helmet and accessories.
The small bag has also a detachable, adjustable shoulder strap.
Helmet pouch Lightweight pouch to protect and transport one helmet only.
Asset Management
RFID RFID transponders and barcode labels in two sizes are optionally available for
clear identification of the helmet, e.g. for use in logistics and asset
management.
Barcode
Service life Abstract from IFU: With proper care, both helmet and goggle have a lifetime of about
8 years. Depending on the conditions of use, the lifetime may vary considerably.
The helmet must be replaced if damaged or subjected to mechanical stress.
Dispose of the goggle if there is evident surface damage, such as scratches, cuts
or marks.
However, the actual service life depends heavily on various environmental factors -
such as use, service, maintenance, storage, transport, cleaning, care - to which the
product is exposed.
The statement “lifetime about 8 years" should be understood more as an
orientation or recommendation and not as a binding replacement period after
which the helmet must be replaced.
Cleaning The helmet can be cleaned manually using only neutral soap and lukewarm water.
Packaging Packed in folded box with an Instruction for use.
Logistic information • Each helmet is marked with an individual serial number on the CE certification
label inside the helmet