This certificate documents the inspection results of 16428 pieces of 1/2" x 1" hex cap screws supplied by Ningbo Eco-Fastening Industry Supply Co., Ltd. to Compañia H. Carlos Schneider Peru. The screws were made of C1035 steel, hot-dip galvanized to 55-61 micrometers, and met the dimensional, chemical composition, mechanical property, and coating thickness standards of ASTM F3125F3125M-15a for hex bolts. Samples passed tests for appearance, hardness, tensile strength, yield strength, proof load stress, torque, and other metrics. The document concludes that the screws conform to the specifications for ASTM F3125F3125M-15a
This certificate documents the inspection results of 16428 pieces of 1/2" x 1" hex cap screws supplied by Ningbo Eco-Fastening Industry Supply Co., Ltd. to Compañia H. Carlos Schneider Peru. The screws were made of C1035 steel, hot-dip galvanized to 55-61 micrometers, and met the dimensional, chemical composition, mechanical property, and coating thickness standards of ASTM F3125F3125M-15a for hex bolts. Samples passed tests for appearance, hardness, tensile strength, yield strength, proof load stress, torque, and other metrics. The document concludes that the screws conform to the specifications for ASTM F3125F3125M-15a
This certificate documents the inspection results of 16428 pieces of 1/2" x 1" hex cap screws supplied by Ningbo Eco-Fastening Industry Supply Co., Ltd. to Compañia H. Carlos Schneider Peru. The screws were made of C1035 steel, hot-dip galvanized to 55-61 micrometers, and met the dimensional, chemical composition, mechanical property, and coating thickness standards of ASTM F3125F3125M-15a for hex bolts. Samples passed tests for appearance, hardness, tensile strength, yield strength, proof load stress, torque, and other metrics. The document concludes that the screws conform to the specifications for ASTM F3125F3125M-15a
Add: Yindiannong (Zhongjie ), Luotuo Town, Zhenhai District, Ningbo, China CERTIFICATE OF MATIERES (AS PER EN10204 3.1.B) INOICE NO: CISER1804 PURCHASER: COMPAÑIA H. CARLOS SCHNEIDER PERU SIZE: 1/2" X 1" CONTRACT NO.: 18EGCIHCS04P QUANTITIES: 16428 PCS MANUFACTURING DATE: NOV 24,2018 LOT NO.: 1804P14 COMMODITY: HEX CAP SCREW A325 TYPE 1 HDG FINISH FULL THREAD MATERIAL: C1035 COATING SPE.: ASTM A153 CL.C-2005,≥ 53 μ DIMENSIONAL INSPECTION H.D.G THICKNESS: 55-61 μ SAMPLING DATE: JAN 2019 SAMPLES: 50 PCS
INSPECTION ITEM STANDARD ACTUAL RESULT RESULT
APPEARANCE OK OK OK HEAD MARK CISER A325 OK OK WIDTH ACROSS FLATS 21.59-22.23 21.75-21.82 OK WIDTH ACROSS CORNERS 24.61-25.65 25.02-25.11 OK HEAD HEIGHT I 7.67-8.20 7.90-8.06 OK LENGTH 22.35-25.4 25.09-25.22 OK GO-GAGE GO GO OK NO-GO-GAGE NO-GO NO-GO OK
CHEMICAL COMPOSITION HEAT NO . 4-06202
CHEMICAL ELEMENT C Mn(%) P(%) S(%) Si(%) Mo Cr Ni Al Ti V TEST RESULT 0.33 0.69 0.017 0.002 0.15 _ _ _ _ _ _
MECHANICAL PROPERTIES (ACC TO SPECIFICATION:ASTM F3125F3125M-15a)SAMPLES: 2 PCS
TEST ITEM STANDARD ACTUAL RESULT RESULT
SURFACE MAX34 32.2-32.8 OK HARDNESS (HRC) CORE 24-35 30.3-31.5 OK TENSILE STRENGTH(KSI) 120 126-129 OK YIELD STRENGTH(KSI) 92 99-100 OK PROOF LOAD STRESS(KSI) 85 85 OK Fbi (KN) 63 69.3-72.4 OK △2i (Deg) 240° 241.8-243.4 OK TORQUE END(Nm) MAX 169 124.5-128.7 OK NOTE: MATERIAL DESCRIBED IN THIS DOCUMENT HAS BEEN INSPECTED UNDER THE PARAMETERS SET FORTH AND FOUND TO BE IN CONFORMANCE WITH THE CHEMICAL AND MECHANICAL PROPERTIES OF ASTM F3125F3125M-15a. Organizer : FERNANDO FU Date : JAN 5,2019 Auditing : FERNANDO FU Date : JAN 5,2019