The 2 tonne an hour machine has a big mill capacity, large
hammers and a heavy duty screw feeder with a 0.55 kilowatt motor and heavy duty flights manufactured from 5mm wear plate. The main function of the swing hammer mill is to crush -60mm top size wet coal reducing it to -4mm to -6mm top size product. This operation is carried out by a controlled feed rate to the mill housing. The screw feeder features a drop down bottom door for easy cleaning. The swing hammermill is constructed from top quality materials. All chutes and screw conveyor are galvanised, the liner plates are mild steel and the screens are manufactured from 316 grade stainless steel with the screw feeder being manufactured from wear resistant steel. The frame covers and guards are made from galvanised steel. The screw feeder assembly, crusher housing and top hopper are all painted with Epigloss 4 to reduce friction and product hang up. The unit also includes a drop down step reducing the height for lifting product into the top chute. The main feature of the mill is the high product through put with little dust emission, minimal operator Overall dimensions L 1900 x W 1200 x H 1430 attention and with improved safety features. The unit is fitted with a mushroom emergency stop and a stop/start station. There are Power Three phase 415V 20 AMP plug safety cut out switches preventing the mill from operating when the Drive motors 5.5 KW mill door is not securely latched, on the top feed hopper lid and on the screw feed housing inspection door. The mill is fitted with two Feed screw motor .55KW heat treated hammers and a stainless steel screen. The internal surfaces of the mill are fitted with 6mm wear plates. The bottom Machine mass Approximate 500kg loading chute is designed to take a 23 litre plastic bucket to be fitted Approx. Mass 250 (kg) underneath. It is fitted with a spring loaded foot operated mechanism and includes dust seals. The machine is manufactured Material Input size 60mm from galvanised steel and painted with two coats of industrial enamel. The machine will come with two (2) fixed and two (2) swivel Material output size -4 to -5mm castors. The unit is powered by a, 3 phase motor 415Volt 20 amp 5 Compressed air blow down for pin outlet. internal cleaning