Professional Documents
Culture Documents
: FIBERHOME/HDGL-2020-0202
Technical Proposal
For
Submarine Optical Fiber Cable
Type: FHOC-DAL-48
G.652D
Address: FiberHome Industrial Park, West of Sanhu Avenue, Gaolan Port Economic Zone, Zhuhai, China
Zip code: 519050
Tel: 86-756-6967101
Fax: 86-756-6967102
DOC.No.: FIBERHOME/HDGL-2020-0202
1. GENERAL
This listed specification covers the structure and performance of Submarine Cable as
manufactured by FiberHome Telecommunication Technologies Co., LTD (FiberHome).
Matters not mentioned in this technical specification shall be negotiated by customer and
FiberHome. Customization can be conducted reasonably. The number of fibre can be up
to 96.
2. REFERENT STANDARDS
The cable which FiberHome offered is designed, manufactured and tested based on
below standards, where the specification deviates from below standards, this
specification shall apply.
ISO 9001 Quality Management Systems
ITU-T G972 Definition of terms relevant to optical fiber submarine cable system
ITU-T G976 Test methods applicable to optical fiber submarine cable systems
Address: FiberHome Industrial Park, West of Sanhu Avenue, Gaolan Port Economic Zone, Zhuhai, China
Zip code: 519050
Tel: 86-756-6967101
Fax: 86-756-6967102
DOC.No.: FIBERHOME/HDGL-2020-0202
3. CABLE DESIGN
The design of the offered cable has been a typical structure of submarine cables which
is prevailing over the world and has been approved for stable performance in submarine
cable system. The design life of the submarine optic fiber cable is for a minimum of 25
years operation.
3) Inner sheath
The cable core is protected by a HDPE sheath for mechanical protection.
5) Outer sheath
Outer sheath, which is made of PP rope and asphalt is extruded over the armor tape to
protect the cable from mechanical abrasion during handling, transportation and cable
deploying, and the corrosion induced by hydrogen in the seawater.
Address: FiberHome Industrial Park, West of Sanhu Avenue, Gaolan Port Economic Zone, Zhuhai, China
Zip code: 519050
Tel: 86-756-6967101
Fax: 86-756-6967102
DOC.No.: FIBERHOME/HDGL-2020-0202
Construction Characteristics
Fiber optic type SM (G.652D)
Fiber count up to 48 Fibers
Stainless steel tube O.D. nominal 3.7 mm
PE sheath thickness nominal 3.1 mm
1stGalvanized armoring steel wires nominal 14×φ2.8 mm
2ndGalvanized armoring steel wires nominal 20×φ2.8 mm
2 layers of PP yarns thickness nominal 3.4 mm
Cable outer diameter nominal 27.9 mm
Mechanical Characteristics
Weight in air nominal 1.94 kg/m
Weight in seawater nominal 1.3 kg/m
Ultimate tensile strength (UTS) nominal 275 kN
Cable breaking load (CBL) nominal 275 kN
Fiber breaking load (FBL) nominal 275 kN
Nominal temporary tensile strength (NTTS) nominal 190 kN
Nominal operating tensile strength (NOTS) nominal 95 kN
Nominal permanent tensile strength (NPTS) nominal 65 kN
Address: FiberHome Industrial Park, West of Sanhu Avenue, Gaolan Port Economic Zone, Zhuhai, China
Zip code: 519050
Tel: 86-756-6967101
Fax: 86-756-6967102
DOC.No.: FIBERHOME/HDGL-2020-0202
Usage Characteristics
Minimum bending radius with load 1 m
Minimum bending radius without load 0.8 m
Water depth up to 500 m
Operating temperature range -20 to +50 ℃
Storage temperature range -30 to +60 ℃
Handling temperature range -15 to +45 ℃
Address: FiberHome Industrial Park, West of Sanhu Avenue, Gaolan Port Economic Zone, Zhuhai, China
Zip code: 519050
Tel: 86-756-6967101
Fax: 86-756-6967102
DOC.No.: FIBERHOME/HDGL-2020-0202
Optical Characteristics
Attenuation @1310nm ≤0.35 dB/km
@1550nm ≤0.21 dB/km
Zero dispersion wavelength 1300~1324 nm
Zero dispersion slope ≤0.092 ps/nm2·km
Dispersion @1288~1339nm ≤3.5 ps/nm·km
@1271~1360nm ≤5.3 ps/nm·km
@1550nm ≤18 ps/nm·km
Polarization mode dispersion (PMD) ≤0.2 ps/√km
Cable cutoff wavelength (λCC) ≤1260 nm
Dimensional Characteristics
Mode field diameter @1310nm 9.2±0.4 μm
@1550nm 10.4±0.5 μm
Fiber curl radius ≥4.0 m
Cladding diameter 125±0.7 μm
Core / Clad concentricity ≤0.6 μm
Cladding non-circularity ≤0.7 %
Coating diameter (uncolored) 245±10 μm
Coating / Cladding concentricity ≤12 μm
Coating non-circularity ≤6.0 %
Mechanical Characteristics
Proof test level ≥200 kpsi
(≥1.40) (GPa)
Fatigue resistance parameter (Nd) ≥20
Peak coating strip force 1.3~8.9 N
Address: FiberHome Industrial Park, West of Sanhu Avenue, Gaolan Port Economic Zone, Zhuhai, China
Zip code: 519050
Tel: 86-756-6967101
Fax: 86-756-6967102
DOC.No.: FIBERHOME/HDGL-2020-0202
All fibers have unique fiber coding as shown below for 48 fibers
Fibre
BLUE ORANGE GREEN BROWN GREY WHITE RED NATURAL YELLOW VIOLET PINK AQUA
Color
Ring
Marking
/ 1 2 3 4 5 6 7 8 9 10 11 12
S60 13 14 15 16 17 18 19 20 21 22 23 24
S100 25 26 27 28 29 30 31 32 33 34 35 36
D80 37 38 39 40 41 42 43 44 45 46 47 48
Note: 1. Monochrome: 12;
2. S: Single Ring
3. D:Double Ring
Normal FAT only includes OTDR testing, structure checking on samples, and visual
checking on delivery length. Other tests can be negotiated between clients and
FiberHome, but it may be charged separately.
Address: FiberHome Industrial Park, West of Sanhu Avenue, Gaolan Port Economic Zone, Zhuhai, China
Zip code: 519050
Tel: 86-756-6967101
Fax: 86-756-6967102
DOC.No.: FIBERHOME/HDGL-2020-0202
Address: FiberHome Industrial Park, West of Sanhu Avenue, Gaolan Port Economic Zone, Zhuhai, China
Zip code: 519050
Tel: 86-756-6967101
Fax: 86-756-6967102