Professional Documents
Culture Documents
Manufacturer of Telecommunication Cables (Copper & Optical Fiber), HDPE Duct & Electircal Overhead Conductors & Cables
\Xob___
1. General
l.l Scope
This Specification covers the design requirements and performance standard for the supply of optical
fiber cable in the industry. ensures a stable quality control system for our cable products through
several programs including ISO 9001.
1.2 Reference
The cable are designed, manufactured and tested according to the standards as follows:
ITU-T G.652 Characteristics of a single-mode optical fiber
ETA TIA 458 Standard Optical Fiber Materials Classes and Preferred Sizes
rEC 60794-r-2 Optical fiber cables-part l-2: Generic specification-Basic optical cable
test procedure
of the cable.
I.4 Application
Item Value
ITU-T G,652D
-{Or2--
3" Optical Cable
3.L Technical Characteristics
fibers with enough space and
D The unique second coating and stranding technology provide the
bending endurance, which ensure good optical property
of the fibers in the cable
performance
F Accurate process control ensures good mechanical and temperature
}Highqualityrawmaterialguaranteesthelongservicelifeofcable
cr shmth
Annd {$ted tapr}
l\:ata bhrtking tapt
our.d aptie frbr
Cw filling csrllpswd
Limited
All Rights Reserved Copyright @2020, Bangladesh Cable Shilpa
http://www.bcsl. gov.bd
"l0b-_
3.4 Dimensions and DescriPtions
The standard structure of cable is shown in the following table, other structure and fiber count are
also
Number 8
Diameter 2.1
Material MDPE
Color Black
Outer Sheath
Thickness (mm) Nominal: 2.0i0.2
Item Value
l. Tensile Performance (N) 2500
2. Crush (N/100 mm) 2000
<Ca-
tal Test Characteristics
of the eable are in accordance with the
The mechanical and environmental performances
attenuation measurements required in this section
following table. unless otherwise specified, all
shall be performed at 1310 nm & 1550 nm'
rEc 60794-l-2-87
Cycles:10 Additional attenuation: <0. I dB
Length under test: 1m No damage to outer jacket and inner eleme
Turns: + 1 80o
rEC 60794-1-2-F5B
Water Time : 12 hours No water leakage, except for the messenger
Penetration Sample length : 3m part..
Water height : 1m
rF,C 60194-1-2-F1
Sample length: at least 1000m
The change in attenuation coefficient shall
Temperature Temperature range: -40oC - +70'C
be less than 0.05 dB/km'
cycling Cycles: 2
Temperature cycling test dwell time:
l2 hours
"b'rrt>
Packaging and Drum
Unlessotherwisespecified,thecablesheathmarkingshallbeasfollows:
r Color: white
oContents:ProductionCompanyname,theyearofmanufacture'thetypeofcable'cable
number, length marking
o Interval L * 0.Zoh m
outersheathmarkinglegendcanbechangedaccordingtouser,srequests.
fo4-
-.I[iffir:* BHifu.,
Cable ShilPa Limited
All Rights Reserved Copyright @2021, Bangladesh
http :/iwww.bcsl' gov'bd