Professional Documents
Culture Documents
Gujarat Technological University
Gujarat Technological University
___________
Q.2 (a) Draw neat sketch of weld and shows all terms associated with it. 03
(b) Explain failure of tension members in detail. 04
(c) An ISMC 150 @ 16.4 Kg of Fe 410 grade of steel is to carry factored 07
tensile force of 750 kN. The channel section is to be welded at the site
to a gusset plate 10 mm thick. Design a fillet weld, if the overlap is
limited to 375 mm.
OR
(c) Design a tension member subjected to factored load of 350 kN. Use 07
double angle section connected back-to-back on either side of gusset
plate of 8 mm thickness with bolts. Use fy = 250 MPa and fu = 410 MPa
for both member and bolt material.
Figure 1
*************
Page 2 of 2