Professional Documents
Culture Documents
Nook Jack Catalog
Nook Jack Catalog
Ve r s i o n 3 . 0 5 . 0 2
w w w . n o o k i n d u s t r i e s . c o m
MARKET SEGMENTS
SERVED
Aerospace
Packaging
Automotive
Electronics
Transportation
Precision Ball Screws Ball Splines CC™ Cylinders Linear Slides Electric Cylinders Tire Manufacture
Entertainment
Semiconductor
Factory Automation
Steel
Chemical
Worm Gear Screw Jacks Profile Rails Planetary Roller Screws EZZE Mounts™ Modular Linear Actuators Medical & Diagnostic
NOOK PARTNERS
NOOK QUALITY EVOLUTION
Since 1969, Nook Industries, Inc. has relentlessly and Laser Lead Measurement - Precise • Design for Six Sigma manufacturing
• D.O.E. (Design of Experiments) QUALITY SYSTEMS AND
continuously developed the capabilities and skills to lead error gauging is utilized to validate ACCREDITATIONS
• APQP (Advanced Product Quality Planning)
deliver products of the highest quality. Knowledge of processes to conform to Nook internal
• DFMEA, PFEMA
testing and design, coupled with this experience working specifications and customer requirements. • FEA (Finite Element Analysis)
with stringent customer requirements in aerospace, • DVP&R (Design Verification Plan & Report) SUPPLY CHAIN APPROVAL
medical, energy and military applications has provided the • Reliability Testing PROCESS
background to be a reliable partner. • Process validation to 21 CFR Part 82 (Medical
Device)
HIGH TECH QUALITY EXPERIENCE STATE OF THE ART
MANAGEMENT SYSTEMS
TESTING
When you select Nook Industries as a supplier, you can
Zeiss Roundness Measurement -
be assured that your product will be designed and tested
Critical to quality, characteristics such as Efficiency Measurement - Nook Engineering has designed APQP LAUNCH PROTOCOLS
to rigorous product planning. Pre-design activity includes
roundness are monitored throughout the test machines to measure and validate screw assembly
understanding of customer requirements applied to
screw manufacturing process. efficiency.
predictive models, engineering calculations and linear
modeling through prototype development, stereo- SYSTEM AND PROCESS
PROTOCOLS
lithography samples of form, fit, and function that verify
design criteria.
CERTIFICATIONS
ITAR
DESIGN AND TEST FOR FAULT
Nook Industries is registered with the Department Of TOLERANCE AND PROGNOSTICS
State For International Traffic In Arms Compliance.
CUBIC JACKS.....................................154-177
Nook worm gear screw jacks are used in many military applications.
WORM GEAR
Technical Information..................... 156-161
Technical Data................................ 162-177
INTRODUCTION
JACK MODELS
ActionJac™ Worm Gear Screw Jack systems are ruggedly BALL SCREW JACKS STAINLESS STEEL SCREW JACKS METRIC TRAPEZOIDAL SCREW JACKS
designed and produced in standard models with load
ActionJac™ Ball Screw Jacks use a ball screw ActionJac™ Stainless Steel Machine ActionJac™ Trapezoidal Screw Jacks utilize the same
handling capacities from 1⁄4 ton to 100 tons. They may be
and nut made from hardened alloy steel with Screw Jacks are ideal for use in demanding rugged design as ActionJac™ Machine Screw Jacks.
used individually or in multiple arrangements. There are no
hardened bearing balls carrying the load environments where corrosion resistance These true metric jacks include a lift shaft with a
“standard” travel lengths and each Worm Gear Screw Jack is
between nut and screw. This rolling action is required. All external components are special trapezoidal thread form. This thread form
built to specification.
reduces friction between the nut and the screw manufactured from 300 Series Stainless has been created to stay within ISO standards
The jack housings are made of ductile iron and proportioned to permitting smooth and efficient movement Steel materials. These jacks use a stainless yet retains the centralizing feature of our 2C acme
support the rated capacity of the unit. MJ, 1⁄4 ton, and 1⁄2 ton of the load. Because of the greater steel worm with a high strength bronze threads. These jacks can be supplied with IEC
models have aluminum housings. efficiency and rolling action, the ball drive sleeve. Load capacities for Stainless motor mounts.
screw can operate at higher speeds or Steel Machine Screw Jacks range from
Each ActionJac™ Worm Gear Screw Jack incorporates an
increased duty cycle when compared 1,300 to 23,000 pounds. For increased
alloy steel worm which drives a high strength bronze worm
with the Machine Screw Jack. The capacity, a 17-4PH hardened worm is
gear (drive sleeve). The worm shaft is supported on anti-
addition of a high efficiency ball screw available.
friction tapered roller bearings with external seals provided to
and nut reduces the required input torque to
prevent loss of lubrication (sealed radial bearings on the MJ,
approximately one-third the torque required for the
1⁄4 , 1⁄2, and 1 ton units). The drive sleeve is supported on
Machine Screw Jack.
antifriction tapered roller or ball thrust bearings. Rotation of
the drive sleeve causes the lifting screw to translate or rotate,
depending upon jack configuration.
ONLINE
INTRODUCTION
worm gear and nut rotate together. When the lift shaft is held to
prevent rotation, the lift shaft will move linearly through the gear
box to move the load.
This printing press application utilizes two upright translating ball screw jacks to set the proper In this automobile lift, the linear motion is provided by two inverted rotating ball screw jacks.
gauge on the feed rollers.
ONLINE
INTRODUCTION
pages 30 and 68. threads, somewhat reducing jack life.
dampers. Machine Screw and Ball Screw Jacks from 1 ton to 15 ton (and the load) will turn and not translate. A feature can be added
capacities can be supplied with double clevis mounts. One clevis is NOTE: Mounting hardware for double clevis jacks should be to a machine screw jack to prevent lift shaft rotation. This type of Ball screw jacks can also be supplied with a device that prevents
mounted on the end of the lift shaft and the other clevis is welded specified as heat treated alloy steel clevis pins with at least 100,000 jack is referred to as a “keyed jack” and is available in upright and rotation of the lift shaft. Anti-rotation is accomplished by a square
to a heavy duty stem cover, which is welded to the housing. Double psi ultimate tensile strength. inverted models. A keyed jack has a keyway machined along the guide attached to the screw translating inside a square stem cover
clevis designs are available with optional accessories such as boots, length of the lifting screw. A matching key is fastened to the cover attached to the jack. The square stem tube is supplied with lube
Double clevis jacks used horizontally will have reduced column
motor mounts, right-angle reducers, motors, encoders and rotary of the jack which will eliminate lift shaft rotation. The keyway in the fittings.
strength and life. For most horizontal applications, Nook recommends
limit switches. the use of an Electric Cylinder (contact Nook Engineering for more screw causes greater than normal wear on the internal drive sleeve
To check column strength limitations for each application, use the information).
extended pin-to-pin dimension and the column strength chart on
Double Clevis Double Clevis Upright Keyed Upright Keyed Inverted Keyed Inverted Keyed
Ball Screw Jack Machine Screw Jack Ball Screw Jack Machine Screw Jack Ball Screw Jack Machine Screw Jack
In this solar panel application, the linear motion is provided by a double clevis machine screw jack. In this road barrier application, the linear motion is provided by an inverted keyed machine
screw jack.
INTRODUCTION
load conditions require precision positioning control. Adjustable With a Lead accuracy of ±0.004” per foot, actual travel could be
selection of inch and metric ball, acme and trapezoid screws in long
backlash Machine Screw Jack models are available to reduce from 11.996 to 12.004 inches.
lengths. Jacks are not preassembled or stocked with standard length
backlash to approximately 0.003”.
screws. Each jack is made to order based on travel length. The rolled thread ball screw, as employed in ActionJac™ products,
An Anti-backlash Machine Screw Jack allows the lash between the is held within ±0.004” per foot lead error. The rolled acme thread
Nook Industries has the capability to manufacture long screws for
drive sleeve thread and the lifting screw thread to be controlled by screws used in our machine screw jacks have a typical lead accuracy
special applications, limited only by the availability of raw materials.
adjusting the top cover of the jack. The anti-backlash jack design has of ±0.004” per foot.
Rotating screw jacks may be assembled with a larger diameter
an upper drive sleeve and a lower drive sleeve. Adjustment of the
lift screw for greater column strength. Jacks can be supplied with When multiple jacks are used to move a load with precise
cover changes the relative distance between the drive sleeves. This
special pitch lift screws to change the jack operating speed. synchronicity, lift shafts of similar lead accuracy can be factory
change in distance compensates for any lash. Because the drive
selected and supplied as sets. Consult factory for matched lead set
sleeve is split, the life of an Anti-backlash Machine Screw Jack will
TWIN LEAD SCREWS tolerances.
be less.
Jacks can also be assembled with twin lead screws if required by the
Anti-backlash Machine Screw Jacks minimize backlash, but should INPUT TORQUE
application. Contact the engineers at Nook Industries for availability.
not be used to completely eliminate backlash. While it may be
Upright Anti-Backlash Inverted Anti-Backlash The input torque is the rotary force required at the input of the jack
desirable to totally eliminate backlash, the result would be a lock-up Machine Screw Jack Machine Screw Jack TRAVEL VS. INPUT REVOLUTIONS to generate an output force at the lift shaft. The product specification
of lifting shaft and drive sleeve.
pages show the torque necessary to raise one pound. This number
The number of turns of the worm required to move one inch is a
Ball Screw Jacks can be factory adjusted to reduce backlash by multiplied by the load is the required input torque.
function of the worm gear ratio and the lead of the screw. The charts
selecting bearing ball size in the ball nut. This selective fit technique
at the front of each section give the number of “turns of worm for Due to static friction, starting or “breakaway” torque can be as
can be used to achieve a lash between the ball nut and ball screw of
1” raise” for each jack. The motor rpm divided by this number is the much as two to three times running torque. If the load is moved
0.003” - 0.005”. Precision ball screws with preloaded ball nuts can be
linear speed of the jack lift shaft or travel nut. Conversely, the desired horizontally, the force required to move the load will be lessened in
supplied to achieve zero lift shaft backlash.
travel rate multiplied by the “turns of worm for 1” raise” equals the proportion to the coefficient of friction of the surface along which
input rpm required. the load is moved. In addition, the force needed to start, stop and
hold the load (inertia loading) is provided by the jack. Jack sizing
LEAD ACCURACY AND MATCHED LEAD should consider all these forces. If an application calls for several
Lead accuracy is the difference between the actual distance jacks to be driven together in series, the first jack should be limited
traveled versus the theoretical distance traveled based on lead. For to three times the rated Maximum Input Torque, as listed in the Jack
example: A screw with a 0.5 inch lead and ±0.004” per foot lead Selection chart for the particular selected jack. For multiple high lead
ball screw jacks or belt/chain driven jacks contact Nook Industries for
In this steel press application, the inverted translating anti-backlash jacks set
the roller height with precision control.
Nook worm gear screw jacks are used widely in the locomotive industry.
INTRODUCTION
variation in the lift shafts may result in unequal load distribution.
the force on the lifting shaft cannot cause the drive system to used to stop the motor. Mechanical stops can cause damage to the
TARE DRAG TORQUE Jacks of varying capacity with equal “turns of worm for 1” travel”
reverse direction. Machine Screw Jacks having gear ratios between jacks because most electric motors will deliver stall torques much
may be used to accommodate unequal loading.
The gear box components (bearings, seals and grease) in a jack 20:1 and 32:1, can be considered self-locking. However, vibration, higher than their rated torques and motor inertia can cause severe
add “tare drag”. The product specification pages show the tare drag wear, temperature, or lubrication characteristics may case any worm shock loads. For hand operation, mechanical stops can be provided. Number of Jacks - The number of jacks used depends on physical size
torque. When loading ActionJac™ Worm Gear Screw Jacks with screw jack to backdrive and should be considered. All other ratios and design of the equipment. Stiffness of the equipment structure
loads less than 25% of their rated capacity, tare drag torque needs will require a brake to prevent backdriving. All Ball Screw Jacks can BALL SCREW VS. MACHINE SCREW JACK and guide system will determine the appropriate number of jacks
to be added to the torque requirement. backdrive and require some means of holding the load, such as a required. Fewer jacks are easier to drive, align and synchronize.
The decision to use a ball screw jack or a machine screw jack is based
brake on the motor. The product specification pages show holding
on the application. For many applications, a ball screw model is the
INPUT SPEED torque values. Holding torque represents the amount of input torque
best choice. Ball screw jacks are more efficient and therefore require DUTY CYCLE
required to restrain the load.
ActionJac™ Worm Gear Screw Jacks are rated for up to 3,000 rpm less power than a machine screw jack in the same application.
Cycle Time – Total time the jack is operating in one complete cycle
input speed, provided horsepower and temperature ratings are not In addition to back driving, system inertia usually results in some
For low duty cycle applications, for hand-operated applications, or if
exceeded. Contact Nook Industries engineers if higher input speeds over travel when the motor is switched off. The inertia of the system Duty Cycle – Percentage of time on versus total time.
backdriving is not acceptable consider a machine screw jack.
are required. should be considered when determining the brake size required to Verify the duty cycle for the selected jack. Recommended duty
stop a dynamic load. ActionJac™ Ball Screw Jacks are preferred for:
cycles at max horsepower are:
DUTY CYCLE • Long travel lengths
TEMPERATURE • Long, predictable life
Duty cycle is the ratio of run time to total cycle time. Some of the • Ball screw jacks = 35% (65% time off)
• High duty cycles
mechanical energy input to a worm gear screw jack is converted All ActionJac™ Worm Gear Screw Jacks are suitable for operation • Machine screw jacks = 25%.(75% time off)
• Oscillating motion
into heat caused by friction. The duty cycle is limited by the ability within the specified limits provided that the housing temperature is
of the worm gear screw jack to dissipate heat. An increase in not lower than -20°F or higher than +200°F. Factory supplied grease Duty cycle is based on standard ambient temperature, with 1 minute
ActionJac™ Machine Screw Jacks are preferred for:
temperature can affect the properties of some components resulting in standard units will operate in this range. For higher or lower on 2 minute off cycles. The ability of the jack to dissipate the heat
in accelerated wear, damage and possible unexpected failure. operating temperature ranges contact Nook Industries. • Resistance to backdriving
that builds during operation determines duty cycle. Anything that
• Vibration environments
Maximum allowable horsepower ratings (see product specification reduces the amount of heat generated or increases heat dissipation
Housing temperature should be monitored and kept below 200°F • Manual operation
pages) are based on intermittent operation. The approximate • High static loads will allow higher duty cycles. Jacks may be limited by maximum
maximum. Continuous or heavy duty operation is possible by de-
allowable duty cycles are: Ball Screw Jacks= 35% Machine Screw temperature (200°F) and not duty cycle. Contact Nook Industries for
rating the jack capacity, external cooling of the unit or through the
Jacks= 25% assistance with these applications.
use of a recirculating lubrication system. JACK SIZING CONSIDERATIONS
Jacks are limited by multiple constraints: load capacity, duty cycle,
horsepower, column strength, critical speed, type of guidance, HORSEPOWER RATINGS
brakemotor size, and ball screw life. To size a screw jack for these The horsepower limit of the jack is a result of the ability to dissipate
constraints, application information must be collected. the heat generated from the inefficiencies of its components.
Maximum horsepower ratings are based on intermittent operation.
Horsepower is calculated by using the following formula:
LOAD CAPACITY
The load capacity of the jack is limited by the physical constraints of Torque to Number of
raise one pounds input
× ×
its components (drive sleeve, lift shaft, bearings, etc.). All anticipated Horsepower
pound to be raised rpm
loads should be within the rated capacity of the jack. Loads on the per jack =
jack in most applications include: static loads, dynamic or moving 63,025
loads, cutting forces or other reaction forces and acceleration/ The product specification pages show the “torque to raise one
deceleration loads. pound” value for each jack. Add tare drag torque if operating under
25% rated load.
For shock loads, the peak load must not exceed the rated capacity
of the jack, and an appropriate design factor should be applied that is Horsepower values are influenced by many application specific
commensurate with the severity of the shock. variables including mounting, environment, duty cycle and
lubrication. The best way to determine whether performance is
For accidental overloads not anticipated in the design of the system,
within horsepower limits is to measure the jack temperature. The
jacks can sustain the following overload conditions without damage:
temperature of the housing near the worm must not exceed 200°F.
10% for dynamic loads, 30% for static loads.
Total Load - The total load includes static loads, dynamic loads and
Nook worm gear screw jacks are used widely in sawmills.
inertia loads from acceleration and deceleration. Also consider
reaction forces received from the load such as drilling or cutting ONLINE
forces when using a jack to move a machine tool.
14 NOOK PRECISION ACTUATORS nookindustries.com
The specifications and data in this publication are believed to be accurate and reliable. However, it is the responsibility of the product user to determine the suitability of
Nook Industries products for a specific application. While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement. 15
WORM GEAR SCREW JACKS
DESIGN CONSIDERATIONS (CONTINUED)
For multiple jack arrangements, total horsepower required depends a point at which the maximum length “L” intersects the maximum BRAKEMOTOR SIZING REQUIRED APPLICATION DATA
on horsepower per jack, number of jacks, the efficiency of the gear load. Be sure the jack selected is above and to the right of that point. Load
Safety is the most important consideration. A brake motor is
INTRODUCTION
box(es) and the efficiency of the arrangement. recommended for all ActionJac™ products where there is a
Maximum Length – The maximum length includes travel, housing • Total Maximum Thrust Load on Jacks
Arrangement efficiency – length, starting/stopping distance, extra length for boots and length possibility of injury. • Total Maximum Thrust Load on any one Jack
• Two jacks = 95% to accommodate attachment of the load. • Number of Jacks
Only 20:1 or greater ratio Machine Screw Jacks can be considered
• Three jacks = 90% If column strength is exceeded for the jack selected, consider the self-locking in the absence of vibration.
• Four jacks = 85% Travel
following options:
• Six to eight jacks = 80% The horsepower requirements determine the size of the motor. • Inches
The efficiency of each miter gearbox is 90%. Therefore, motor • Change the jack configuration to put the lift shaft in tension Upon selecting a brake motor, verify that the standard brake has • Orientation (vertical, horizontal, arc, diagonal, etc.)
horsepower requirement for the arrangement: • Increase size of jack. sufficient torque to both hold the load and stop the load.
• Add a bearing mount (like the EZZE-MOUNT™) for rotating Travel Rate
CAUTION: High lead ball screw jacks may require larger nonstandard
HP Number jacks. • Optimal Speed
Horsepower × brakes to stop the load. An appropriately sized brake will insure
per jack of jacks • Change the lift shaft mounting condition (e.g. from clevis • Minimal Acceptable Speed
Arrangement = against excessive “drift” when stopping for both the Ball Screw and
to top plate).
Arrangement
( Efficiency
Gearbox
) • Maximum Acceptable Speed
N
× Machine Screw Jacks.
Efficiency CAUTION: Chart does not include a design factor.
Duty Cycle
The charts assume proper jack alignment with no bending loads on BALL SCREW LIFE
• Distance Per Cycle
where N = Number of gearboxes. the screw. Effects from side loading are not included in this chart. A major benefit of the use of ball screw jacks is the ability to predict • Number of cycles per time period
Jacks operating horizontally with long lift shafts can experience the theoretical life of the ball screw.
Do not exceed the maximum allowable input horsepower for a jack. • Maximum Distance Traveled in any Year
bending from the weight of the screw.
Many models cannot lift the full rated load at 1,800 rpm. • Life Desired
Ball screw life charts are located at the beginning of each ball screw
If the horsepower required exceeds the maximum value for the jack CRITICAL SPEED jack section. (pages 28 -29, 121, and 160) Configuration
selected, several solutions are possible. • Tension, Compression, or both
The speed that excites the natural frequency of the screw is referred FINISHES
• Use a larger jack model to increase the maximum to as the critical speed. Resonance at the natural frequency of the • Driven by Hand, Motor, or Other
allowable horsepower. screw will occur regardless of the screw orientation or configurations GEAR BOX HOUSING FINISH • Translating, Rotating, or Double Clevis
• Use a Ball Screw Jack to reduce the power required to do of the jack (vertical, horizontal, translating, rotating, etc.). The critical 1⁄2 ton, MJ, 1 ton Aluminum Industrial Enamel Paint
the same work. Arrangement
speed will vary with the diameter, unsupported length, end fixity
• Operate at a lower input speed. 2 ton - 100 ton Ductal Cast Iron Industrial Enamel Paint • Arrangement Type, (H, T, U, Inline)
and rpm of the screw. Since critical speed can also be affected by
• Use a right angle reducer to bring the power requirement SS Jacks 300 Series Casting Unpainted • Arrangement Dimensions (X, Y1, Y2, etc.)
the shaft straightness and assembly alignment, it is recommended
within acceptable limits.
that the maximum speed be limited to 80% of the calculated critical Cubic Jacks Aluminum Clear Anodize For dimension information, please refer to the guides online at www.
speed. nookindustries.com.
Per customer request, we can apply epoxy paint or MIL specification
When utilizing multiple jack arrangements, the input torque to the
Because of the nature of most screw jack applications, critical speed primers and paints or paint to other special requirements.
first jack must be considered. It is recommended that the number of
is often overlooked. However, with longer travels, critical speed
jacks driven through a single jack input be limited to a maximum of
should be a major factor in determining the appropriate size jack.
three jacks. Consult Nook Application Engineers for arrangements
Refer to Nook Industries Precision Screw Assemblies Design Guide
where more than three jacks will be driven through a single jack
to best determine the appropriate critical speed for a particular jack
input.
selection.
COLUMN STRENGTH Travel Rate – Establishing a travel rate allows for evaluation of critical
Column strength is the ability of the lift shaft to hold compressive speed and horsepower limits. Acceleration/deceleration time needs
loads without buckling. With longer screw lengths, column strength to be considered when determining maximum required travel rate.
can be substantially lower than nominal jack capacity.
TYPE OF GUIDANCE
If the lift shaft is in tension only, the screw jack travel is limited by
Linear motion systems require both thrust and guidance. Jacks are
the available screw material or by the critical speed of the screw.
designed to provide thrust only and provide insufficient guidance
Refer to the acme screw and ball screw technical sections for
support. The guidance system must be designed to absorb all loads
critical speed limitations. If there is any possibility for the lift shaft to
other than thrust.
go into compression, the application should be sized for sufficient
column strength. Nook Industries can provide either hardened ground round shafting
or square profile rail to support and guide linear motion systems.
Charts are provided in each section to determine the required jack
size in applications where the lift shaft is loaded in compression.
To use the charts (pages 30, 68, 102, 122, 140, 158, and 159), find Nook worm gear screw jacks are used widely in tire manufacturing.
INTRODUCTION
60”/min. This would require using the 6:1 gear ratio when using a Shafting to use would be the LJT-50
1750 rpm AC motor during retraction and 720 rpm during extension. π
Using the horsepower formulas on page 15 the total horsepower NSpeed = .6192 ×( 72 in ) 2 × 1.907 × 106 = 2,248 rpm
need when fully loaded is 3.0 HP with a dual speed 1750/800 AC
motor.
NTwist = 96 in-lb × ( 72 in ) = .28°
.0102 in-lb × 4,200 lb × 720 rpm 25,000
HPper jack = = .489 hp / jack
63,025 (during extension)
SELECTION
LinkJac™Line Shafting: The longest center to center distance Column Strength: The jacks will be loaded in compression and in
between the jack and gearbox is 24 inches, leaving a shaft length of mounting condition D. Based on the load and number of jacks, the
INTRODUCTION
17 inches. Using the formula on page 193 based on Torsional Twist, 2.5-MSJ jack or larger could be used.
the proper Line Shafting to use would be the LJ-8.
Speed and Horsepower: Using a standard 1750 AC motor and the
π
NSpeed = .6692 ×(17 in ) 2 × 3.895 × 105 = 44,547 rpm 2.5-MSJ with 12:1 gear ratio, the travel rate will be .6 inches per
second. Using the horsepower formula on page 15, the horsepower
limit would be exceeded. Using the 5-MSJ 24:1 gear ratio, the travel
NTwist = 41.48 in-lb × ( 17 in ) = .57° rate will be .45 inches per second and the horsepower per jack will
1,235 be sufficient to lift the load. A 3 HP motor would be adequate for the
requirements.
SELECTION
.0144 in-lb × 1,400 lb × 1,725 rpm
Reference Number: From page 31, create reference numbers HPper jack = = .56 hp / jack
63,025
for the following: three 2.5 ton ball screw jacks, inverted rotating
configuration, 12:1 worm gear ration, 15 inches “L” dimension.
HParrangement = .56 hp per jack × 4 jacks = 2.92 total hp
Jacks: .85 × .9
A steel tube manufacturer is developing a new OD polisher that will
A manufacturer is looking to periodically raise and lower a cylindrical (3) 2.5-BSJ-IR 12:1/SSE-1/SSE-2/FA/15/S LinkJac™Line Shafting: The longest center to center distance
increase production by 22%. Because of the increased production
mixer eight inches during the mixing cycle to allow product testing Gearboxes: time, the set-up crew is unable to set the feed table manually between the jack and gearbox is 48 inches, leaving a shaft length of
to insure product quality and consistency. The cylinder weighs 1,700 and is looking to automate the feed table height using screw jack 41 inches. Since the motor is located in the middle, only half the total
(2) GB210 Type D
lbs and is mounting on a movable cart allowing for the final product actuators. The feed table length is 24 feet and weighs 5,600 lbs with torque is needed for calculated torsional twist. Using the formula on
to be moved to a dispensing station. The customer wants a 4 times Shafting: the largest diameter steel pipe. The table height will need to change page 193, the proper Line Shafting to use would be the LJ-16.
safety factor with respect to capacity. (2) LJ-8 17” OAL approximately once every 15 minutes, but no more than 10 times a π
(1) LJ-8 12” OAL day. Maximum height change is 9 inches. The travel rate is .4 inches NSpeed = .6192 ×(41 in ) 2 × 1.168 × 106 = 4,246 rpm
SPECIFICATIONS
per second.
Couplings:
• Single motor and drive
• The load will be in tension. (3) P-2200-XX (½ - ½) SPECIFICATIONS NTwist = 40.32 in-lb × ( 41 in ) = .09°
• Total travel 8 inches (5) P-2200-178 (¾- ¾) • Single motor and drive, with the possibility to remove the motor
19,500
• 4 times safety factor
• 8 inches in 5 seconds Motor: and drive by hand SELECTION
• The load will be in compression.
2 HP AC Motor 1750 rpm Reference Number: From page 69, create reference numbers for the
ANALYSIS • Total travel 14 inches
• .25 inches in 1 second following: three 2.5 ton ball jacks, upright translating configuration,
Configuration: To minimize the size of the motor drive, a Ball Screw 24:1 worm gear ration, 14 inches travel.
jack will be used. Based on the mounting frame, the inverted rotating ANALYSIS
Jacks:
configurations will be used. Configuration: Because of the possibility to be hand driven, a
(4) 5-MSJ-U 24:1/SSE-1/SSE-2/FC/14/S
Column Strength: The jacks will be loaded in tension, therefore machine screw jack with 24:1 gear ratio is needed to prevent back
column strength does not need to be considered driving. Based on the mounting constraints, the upright translating Gearboxes:
jack with a clevis rod end will be used. Due to the length of the feed (1) GB210S Type D
Speed and Horsepower: Using a standard 1750 AC Motor and the
table, four jacks will be used in-line with a center mounted motor
2.5HL-BSJ with the 12:1 gear ratio, full travel would be reached in Shafting:
through a single gearbox.
3.5 seconds. Using the horsepower formulas on page 15, a 2 HP AC (2) LJ-16 17” OAL
motor running at 1750 rpm will be adequate for the requirements. (1) LJ-16 12” OAL
ONLINE
Nook ball screw jacks are used extensively in the automobile manufacturing industry.
Nook ball screw jacks are fitted with Nook’s own PowerTrac™ Ball OVERTURNING LOAD - A load that tends to rotate the nut radially
LOAD DEFINITIONS DESIGN CONSIDERATIONS
to an anti-friction (ball) bearing. These elements do not wear COMPRESSION LOAD - A load that tends to “squeeze” the screw. FIG. 2
during normal use, but rather fatigue. Therefore, ball screw life is (See FIG. 1)
OVERTURNING
LOAD
predictable and is determined by calculating the fatigue failure of the THRUST LOAD
components.
FIG. 1
Proper lubrication, regular maintenance, and operation within LOAD LOAD THRUST LOAD
specified limits will allow PowerTrac™ Ball Screws to operate to the SIDE LOAD
predicted life. PROPER BALL NUT ORIENTATION - When a ball screw assembly
is used in an orientation other than vertical, it is important to orient
BACKLASH - Backlash (lash) is the relative axial movement between the return tubes to optimize ball nut operation. (See FIG. 4)
a screw and nut without rotation of the screw or nut. The axial
movement between a new PowerTrac™ ball nut and screw will
FIG. 4
range from .003” to .015” depending on size. Lash in ball screws
will remain constant during normal use. LOAD LOAD
no no
ONLINE
NOTES:
1) The recommended maximum speed is 3,000 rpm provided that 5) All Ball Screw Jacks can backdrive and require some means 7) Accessories such as boots, limit switches, top plates and clevises 11) Tare drag torque need only be added if operating under 25%
the recommended horsepower and temperature are not exceeded. of holding the load, such as a brake on the motor. The product are available. rated load.
specification pages show holding torque values. Holding torque
2) Input torque is shown as torque to lift one pound of load. Starting 8) Catalog dimensions are representative only and are subject to
represents the amount of input torque required to restrain the load Torque to Number
torque is 50% greater than torque shown. For loads less than 25% change without notice. For construction, use only certified prints.
and does not indicate recommended brake size to bring the dynamic raise one × of pounds × rpm
of rated loads add tare drag torque. Horsepower
load to a stop. 9) Units are not to be used for the purpose of personnel support or pound to be raised
per jack =
3) Maximum (allowable) horsepower ratings are based on a 35% movement.
6) All units are suitable for intermittent operation providing that the 63,025
duty cycle at standard ambient temperature, with 1 minute on 2
housing temperature including ambient is not lower than -20°F or 10) End-of-travel stops are not provided.
minute off cycles. For operation at higher duty cycles or repeated
higher than +200°F. Factory supplied grease in standard units will
use over any segment of the total travel, temperature must be
operate in this range. 12) Starting Torque is 50% greater than torque shown.
monitored and remain less than 200°F.
For higher or lower operating temperature ranges consult Nook 13) Measurements listed are for non-keyed jacks. See individual jack
4) Overload capacity of the Ball Screw Jack is as follows: 10% for
Industries. pages for keyed jack info.
dynamic loads, 30% for static loads.
0.5-BSJ 750 893 1,678 116 2,097 10-BSJ 15,000 241 103 301 128
0.5HL-BSJ 500 3,014 5,662 3,767 7,078 10HL-BSJ 10,000 812 346 1,015 432
250 24,111 45,299 56,623 56,623 5,000 6,497 2,765 8,121 3,457
1-BSJ 1,500 316 4,785.9 394 5,982 20-BSJ 30,000 287 554 358 692
1HL-BSJ 1,000 1,065 16,152 1,331 20,190 20HL-BSJ 20,000 967 1,869 1,209 2,336
500 8,518 129,218 10,648 161,523 10,000 7,737 14,952 9,672 18,690
4,000 52 — 66 — 60,000 323 572 403 715
2-BSJ 3,000 124 — 155 — 30-BSJ 45,000 764 1,355 955 1,694
2R-BSJ 2,000 419 — 524 — 30HL-BSJ 30,000 2,579 4,574 3,223 5,718
1,000 3,351 — 4,189 — 15,000 20,630 36,596 25,787 45,744
5,000 27 63 34 79 100,000 505 — 631 —
Nook ball screw jacks are used in the manufacture of airplane components. Nook ball screw jacks are used in numerous maritime applications.
Column strength is the ability of the lift shaft to hold compressive TO USE THIS CHART:
loads without buckling. With longer screw lengths, column strength
may be substantially lower than nominal jack capacity.
Find a point at which the maximum length “L” intersects the 2.5-BSJ-U 6:1 / 10BT-1 / 2CA-2C / FT / 24.5 / BS
maximum load. Be sure the jack selected is above and to the right
If the lift shaft is in tension only, the screw jack travel is limited by of that point.
BALL SCREW MODEL HOUSING CONFIGURATION
the available screw material or by the critical speed of the screw. For
CAUTION: chart does not include a design factor. Model # Model # F = Standard Flange Base
critical speed limitations, contact Nook Engineering. If there is any
300,000
A U
I
= Upright
= Inverted
DC = Double Clevis
UK = Upright Keyed
B = Travel Nut Position "B"
50,000
30.0–TON B
20.0–TON L SHAFT ORDER CODE
30,000
ONE END L TRAVEL
BY CLEVIS,
For Translating Screw Models (U and I) use actual Travel in inches.
Load (lbs.)
10,000 5.0–TON
CCW Position 1, 3, 5 & 7 MODIFIER LIST
C
3.0–TON
2.5–TON CW Position 2, 4, 6 & 8 E and/or B Optional
2.0–TON E = In-Line Encoder (Motor or motor mount required)
3,000 B = Bellows Boots (See page 204-205. Must
ONE END FIXED,
2,000 1.0–TON ONE END calculate extend and retract length.)
CCW Shaft CW Shaft P = Nook Tube Sensor System PNP
SUPPORTED
L N = Nook Tube Sensor System NPN
(CLEVIS
1,000 0.5–TON ATTACHED TO
GUIDE STRUCTURE) S or M Required
S = Standard. no additional description required
500 ORDER CODES (Must Include A Position)
M = Modified, additional description required
ONE END FIXED, NOTE: Both Shaft Extensions Must Be Specified
300 ONE END
200
SUPPORTED L No Accessory
(RADIAL BEARING) SSE-_ = Standard Shaft Extension, Position 1 or 2
000-_ = Delete Shaft Extension, Position 1 or 2
100
D
SPC-_ = Special Modified Shaft Extension, Position 1 or 2
A 1 2 3 4 5 10 15 25 35 50 100
B 2 4 6 8 10 20 30 50 70 100 200 Motor Mounts Without Motor (Position 1 or 2)
BOTH ENDS FIXED Used on 2.5 to 20 Ton Jacks. See pages 180-181 for standard motor
C 3 6 9 12 15 30 45 75 105 150 300
(TOP PLATE L mount order codes.
D 4 8 12 16 20 40 60 100 140 200 400 ATTACHED TO
GUIDED Motor Mounts With Motors (Position 1 or 2)
“L” (inches) STRUCTURE) Used on 2.5 to 20 Ton Jacks. see pages 180-181 & 184
for available motors.
Inch Ball Screw Jack
Right Angle Reducer (Position 1 through 8)
Used on 2.5 to 20 Ton Jacks. See pages 182-183 for available
AVAILABLE LIFT SCREW LENGTHS Right Angle Reducers.
As a major manufacturer of industrial lead screws, Nook Industries screw jacks can be built with a larger diameter lift screw for greater Limit Switches (Position 1 C or E through 8 C or E)
stocks a wide selection of ball screws. Nook Industries has the column strength, or a different lead to change the jack operating Used on 2 to 100 Ton Jacks. See pages 192-197 for available limit
capacity to make long ball screws for special applications. Rotating speed. switches.
ONLINE
0.5-BSJ & 0.5HL-BSJ TOP VIEW 0.5-BSJ-U & 0.5HL-BSJ-U 0.5-BSJ-I & 0.5HL-BSJ-I 0.5-BSJ-UR & 0.5HL-BSJ-UR 0.5-BSJ-IR & 0.5HL-BSJ-IR 0.5-BSJ-IK & 0.5HL-BSJ-UK 0.5-BSJ-IK & 0.5HL-BSJ-IK
3 .437
- 24 UNF-2A 13 Ø 1
8 + Travel .436 1 + Travel 1 Sq.
1 16 2 4
2 1 Clockwise 1 2
4 1 Rotation 3
8 2
3 TYP. Raises Load 28 3
TYP. 1 5
4 Ø2 4
.375 4 8 4
Ø TYP. 3
.373 4 1 Closed 4
4 4 Ø1 8
Closed 4
.941 Ball Nut 4
5 L position A,
.938 1 1 3 3 3
16 specify
× × 1.003 8
8 16 4 8 position B L
11 Keyway 0.997 for opposite
R 3
16 TYP. 13 1 28 Ball Nut
+ Travel 1 1 1
5 9 1 1 Closed Ø1 position A, 2 + Travel 1 Closed
2 1 Ø 16 8 8 4 1 8
8 Ø1 5 specify position B
TYP. 32 16 1 Sq.
TYP. 8 for opposite 4
2 Holes
NON-KEYED KEYED
Backdrive
Max Input Max Allowable Tare Drag Holding Max Worm Speed Max Load at Max Worm Speed Max Load at
Turns of Worm Torque Input Torque Torque Torque to raise 1 lb at Rated Load 1,750 rpm Torque to raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio for 1” Travel (in-lb) (hp) (in-lb) (ft-lb) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
0.5-BSJ Capacity: 0.5 tons 5:1 25 9.5 ⁄3
1
1 1.0 .0095 1,800 rpm 1,000 .0105 1,800 1,000
Screw: 0631-0200
20:1 40 10.2 1
⁄6 1 1 .0102 1,030 rpm 588 .0112 936 534
Screw Specs:
Root diameter (in): 0.500 0.5-BSJ Ball Nut and Flange 0.5-BSJ & 0.5HL-BSJ Options
Start torque = 1.5 × Running .822 Top Plate (optional): 9000-00-12 Clevis End (optional): 9001-00-12
Torque Ø1 1
.796 R 1 1 B.C.
Approximate weight (lbs) 3 2 3 2
Ø
.312
1
4 8 -24 UNF-2B .319
“0” Travel: 3 1 17 1
Ø2 Ø
64 Ø21 Ø
3 2 1
Per inch travel: 0.03 4
4 Holes
4 4
1
3
17 4
Grease: 0.3 32
on 1.750 BC
5
9 16 13
Ø 4 Holes
32 16 3
Ø 3
0.5HL-BSJ Ball Nut and Flange 4 8 -24 UNF-2B
Caution: Jack is self-lowering. Lifting screw must be secured to prevent rotation for non-keyed units.
.700
1 Sq.
3 .796 R
1
4
1 17
2 D D
4 64
17 4 Holes
32 on 1.750 BC
ONLINE
1-BSJ TOP VIEW 1-BSJ-U UPRIGHT 1-BSJ-I INVERTED 1-BSJ-UR UPRIGHT ROTATING 1-BSJ-IR INVERTED ROTATING 1-BSJ-UK UPRIGHT KEYED 1-BSJ-IK INVERTED KEYED
FOR ORDERING: Specify “L” FOR ORDERING: Specify “L”
Ø .500
.499
3 1 5
1 Sq.
2 - 13 UNC-2A 5 8
3 7 4 8 + Travel Ball Nut 1
5
1 8 + Travel
116 34
TYP. Position A, 5
TYP. Clockwise Ø1 8
rotation 3 Specify
15 raises load 5 Ø2 4 Position B 5 1
58 58
16 For Opposite 3 4
Closed Ø1 8 Closed
1.253 5 5
.500 5 4 8 3 48 5
Ø 48
1.247 .498 TYP. L
L 8 48
3
1 1 8 3 1
1.505
7 8 × 16 × 1 8 4
8R Ø 13 Keyway 1.495
1 32 5 1 Ball Nut Position A,
22 2 TYP. 3 34 5
TYP. TYP.
2 Holes 8 + Travel 5
Ø116
3
1 8 Closed Ø1 8 5 Specify Position B 5 Ø1 8
8 1 8 + Travel
for opposite 3
1 8 Closed
1 Sq.
NON-KEYED KEYED
Max Input Max Allowable Tare Drag Backdrive Max Worm Speed Max Load at Max Worm Speed Max Load at
Turns of Worm Torque Input Torque Holding Torque Torque to raise 1 lb at Rated Load 1,750 rpm Torque to raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio for 1” Travel (in-lb) (hp) (in-lb) (ft-lb) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
1-BSJ
5:1 25 19 1
⁄2 3 1.5 .0095 1,660 1,895 .0104 1,515 1,731
Capacity: 1 ton
Screw: 0750-0200
20:1 100 9 1
⁄4 3 .5 .0045 1,750 rpm 2,000 .0049 1,608 1,837
Screw Specs: 1-BSJ-DC DOUBLE CLEVIS 1-BSJ Ball Nut and Flange 1-BSJ Options
Root diameter (in): 0.602 Top Plate (optional): 9000-00-11 Clevis End (optional): 9001-00-11
.863
Start torque = 1.5 × Running 1 1
14 5
Ø116 1 1 Ø
.312
.886 R 2 - 13 .322
Torque 2
3 1 29 21
UNC-2B
2
32 2 B.C.
Approximate weight (lbs) 3
4 19 9
Ø 32
3
3
Ø 232 8
“0” Travel: 8 8 4 Holes Ø31 Ø1
1
13 4
17 on 2.093 B.C. 2 4 1
Per inch travel: 0.04 32
16
Grease: 0.5 5
616
3
8 13
7
Ø 4 Holes
Closed 16 16 1 1
Ø1 -13 UNC-2B
4 2
1 3 Ø .312 TYP.
1 2 + Travel
8
3
4
1
2 5
116
Caution: Jack is self-lowering. Lifting screw must be secured to prevent rotation for non-keyed units.
ONLINE
1HL-BSJ TOP VIEW 1HL-BSJ-U UPRIGHT 1HL-BSJ-I INVERTED 1HL-BSJ-UR UPRIGHT ROTATING 1HL-BSJ-IR INVERTED ROTATING 1HL-BSJ-UK UPRIGHT KEYED 1HL-BSJ-IK INVERTED KEYED
Ø .500
5 .499
1 Sq.
8
1 Ball Nut Position A, 5
3 5
7 4 2 - 13 UNC-2A 8 + Travel Specify Position B 1
34
1 8 + Travel
5
3 116 for opposite Ø1 8
TYP. Clockwise 1
TYP. rotation 11 4
3 6 16
15 raises load 11 Ø2 4
6 16 L 3 Closed
16 Ø1 8
Closed 11 3 11
1.253 11 5 L 8 5 16 11
.500 5 16 5
Ø 16
1.247 .498 TYP. 16
1
3 1
1 1 8 3 34 Ball Nut Position A, 4
1.505
7 8 × 16 × 1 1.495
8
Specify Position B
8R Ø
13
Keyway for opposite 5
1 32 5 3 5 5 Ø18
22 2 TYP. 8 + Travel 5 1 8 Closed 3 8 18 + Travel 3
2 Holes Ø116 Ø1 8 1 8 Closed
TYP. TYP.
1 Sq.
NON-KEYED KEYED
Max Input Max Allowable Tare Drag Backdrive Max Worm Speed Max Load at Max Worm Speed Max Load at
Turns of Worm Torque Input Torque Holding Torque Torque to raise 1 lb at Rated Load 1,750 rpm Torque to raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio for 1” Travel (in-lb) (hp) (in-lb) (ft-lb) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
1HL-BSJ
5:1 10 48.2 1
⁄2 3 3.5 .0241 654 747 .0265 595 680
Capacity: 1 ton
Screw: 0750-0500
20:1 40 22.8 1
⁄4 3 1.5 .0114 691 790 .0125 628 718
Screw Specs: 1HL-BSJ-DC DOUBLE CLEVIS 1HL-BSJ Ball Nut and Flange 1HL-BSJ Options
Root diameter (in): 0.602
Top Plate (optional): 9000-00-11 Clevis End (optional): 9001-00-11
Start torque = 1.5 × Running 1 1
15
Ø 116 .863 1 .312
14 1 Ø
Torque 2
21 2 - 13
2 .322
3 .937 R 2 B.C. UNC-2B
Approximate weight (lbs) 4
17 15
2 3
32 16
“0” Travel: 8 3
8 Ø
9 Ø31 Ø1
1 8 3
19 32 2 4 13 4
Per inch travel: 0.04 Ø2
1
16
32 4 Holes
Grease: 0.5 3 on 2.093 BC 3
78 7 8 13
Ø 4 Holes
Closed 16 16 1 1
Ø1 -13 UNC-2B
4 2
1 Ø .312
1 2 + Travel 3
8
3 TYP.
4
1 5
2 116
Caution: Jack is self-lowering. Lifting screw must be secured to prevent rotation for non-keyed units.
ONLINE
NON-KEYED KEYED
Turns of Max Input Max Allowable Tare Drag Backdrive Max Worm Speed Max Load at Max Worm Speed Max Load at
Worm for 1” Torque Input Torque Holding Torque Torque to raise 1 lb at Rated Load 1,750 rpm Torque to raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio Travel (in-lb) (hp) (in-lb) (ft-lb) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
2-BSJ
6:1 24 40 2 4 3 .0100 1,800 4,000 .0110 1,636 3,740
Capacity: 2 tons
Screw: 1000-0250
12:1 48 26 11⁄2 4 1.5 .0064 1,800 4,000 .0070 1,636 3,740
24:1 96 17 1
⁄2 4 1 .0043 1,800 4,000 .0047 1,636 3,740
Screw Specs: 2-BSJ-DC DOUBLE CLEVIS 2-BSJ Ball Nut and Flange 2-BSJ Options
Root diameter (in): 0.820 1 Top Plate (optional): 9000-00-01 Clevis End (optional): 9001-00-01
1 1.10 .625
Start torque = 1.5 × Running 1 2
5 1 Ø
.635
1 8 - 18
Torque 1
2
1.15 R
3 B.C. UNF-2B
Ø1.687 5 3
Approximate weight (lbs) 3 8 23 17 4 1
1
4 8 Ø 2
“0” Travel: 18 7 Ø3
1 64 41 D Ø1
1 2
1
2
7 4 4 Holes 4 2
Per inch travel: 0.6 8
on 2.750 BC
Closed
Grease: 0.5 7
13 16 15 5
Ø 4 Holes 1
Ø1
32 16 2 8 - 18 UNF-2B
Motor Mount Limit Switch
see pg 180-181 see pg 196-201
Ø.625 TYP.
2 + Travel
1
1
2
3
1 4 21
1
32
Caution: Jack is self-lowering. Lifting screw must be secured to prevent rotation for non-keyed units.
ONLINE
2R-BSJ TOP VIEW 2R-BSJ-U UPRIGHT 2R-BSJ-I INVERTED 2R-BSJ-UR UPRIGHT ROTATING 2R-BSJ-IR INVERTED ROTATING 2R-BSJ-UK UPRIGHT KEYED 2R-BSJ-IK INVERTED KEYED
5 Ø .750
7 .749
1
32 3
Clockwise 8 8 - 18 UNF-2A 1
1 rotation 1 + Travel 18
TYP. 16 raises load
TYP. Ball nut position A
1 15
Ø3 2 Specify position B 316
7 for opposite 1
1
1 Ø .500
.498 TYP. Closed 7 Closed Ø3 2
4 5
58 5 11
1.705 58 532
7 5
1.703 13 3 58
6 1 1 1 216 Ø1 4
× ×1
8 16 2 L 5
Keyway 1.750
1 L 8
2 TYP. 1.740
2 3 TYP.
21 3 15
1 + Travel 3 16 2 Closed
Ø132 2 Closed 5 Ø1 4 Ball nut position A 1
1 3 13 Specify position B 1 Ø3 2
2R 14 Ø 32 8 1 2 4 + Travel 11
1 18 for opposite
TYP. TYP. 4 Holes 16
2 Sq.
NON-KEYED KEYED
Max Input Max Allowable Tare Drag Backdrive Max Worm Speed Max Load at Max Worm Speed Max Load at
Turns of Worm Torque Input Torque Holding Torque Torque to raise 1 lb at Rated Load 1,750 rpm Torque to raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio for 1” Travel (in-lb) (hp) (in-lb) (ft-lb) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
2R-BSJ
6:1 24 40 2 4 3 .0100 1,800 4,000 .0110 1,636 3,740
Capacity: 2 tons
Screw: 1000-0250
12:1 48 26 11⁄2 4 1.5 .0064 1,800 4,000 .0070 1,636 3,740
24:1 96 17 1
⁄2 4 1 .0043 1,800 4,000 .0047 1,636 3,740
Screw Specs: 2R-BSJ-DC DOUBLE CLEVIS 2R-BSJ Ball Nut and Flange 2R-BSJ Options
Root diameter (in): 0.820 1
12
Top Plate (optional): 9000-00-01 Clevis End (optional): 9001-00-01
1 1.10 .625
Start torque = 1.5 × Running 1
5 1 Ø
.635
12 8 - 18
Torque 1.15 R 3 B.C. UNF-2B
3 Ø1.687 5 3
Approximate weight (lbs) 4 8 23 17 4 1
1
1 2
“0” Travel: 18 1
8 Ø
64 41 D Ø1
1 2
Ø3 4 2 2
4 4 Holes
Per inch travel: 0.6 7
7 8 on 2.750 BC
Grease: 0.5 7
Closed 13 16 15
Ø 4 Holes 1 5
Ø1
32 16 2 8 - 18 UNF-2B
Motor Mount Limit Switch
see pg 180-181 see pg 196-201
1 21
132
Caution: Jack is self-lowering. Lifting screw must be secured to prevent rotation for non-keyed units.
ONLINE
2.5-BSJ TOP VIEW 2.5-BSJ-U UPRIGHT 2.5-BSJ-I INVERTED 2.5-BSJ-UR UPRIGHT ROTATING 2.5-BSJ-IR INVERTED ROTATING 2.5-BSJ-UK UPRIGHT KEYED 2.5-BSJ-IK INVERTED KEYED
1 2 Sq.
5 Ø .787 2 4 + Travel
1 1 7 8 - 18 UNF-2A 5
18 + Travel .786
3 1 8 1 3
2 8 Clockwise 18 Ø3 4
TYP. TYP. 13
rotation 3
raises load 3 Ball nut position A 16 51
5 34 75 64
1 78 Specify position B 8
1 for opposite
1 8 Ø .500 TYP. Closed Closed
64 .498 1 3 11
1.752 1 64 Ø1 4 5 16
1.750 1 1 64 7 11 61
1 × ×1 28 4
5 8 16 1 L 16
4 3 7 Keyway 11 51
2 8 18 2 1.755 L
64
TYP. 16
1.745
3
1 Ø 13 4 Holes 5 29 3 Ball nut position A Ø3 4
2R 1 9 32 1 8 + Travel Ø132 1
216 Closed
Ø 14
Specify position B 2
1
+ Travel
1
216 Closed
2 1 13 4
16 16 3 16 1 for opposite
1 2 Sq.
TYP. TYP. 8
NON-KEYED KEYED
Max Input Max Allowable Tare Drag Backdrive Max Worm Speed Max Load at Max Worm Speed Max Load at
Turns of Worm Torque Input Torque Holding Torque Torque to raise 1 lb at Rated Load 1,750 rpm Torque to raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio for 1” Travel (in-lb) (hp) (in-lb) (ft-lb) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
2.5-BSJ
6:1 24 51 2 5 4 .0102 1,800 5,000 .0112 1,636 4,674
24:1 96 21 1
⁄2 5 1.5 .0042 1,500 4,287 .0046 1,370 3,914
Screw Specs: 2.5-BSJ-DC DOUBLE CLEVIS 2.5-BSJ Ball Nut and Flange 2.5-BSJ Options
Root diameter (in): 0.820 1.10 Top Plate (optional): 9000-00-01 Clevis End (optional): 9001-00-01
.625
Start torque = 1.5 × Running 5 1 Ø
.635
1.15 R 8 - 18
Torque 1
1
12 Ø1.687 5 3 B.C. UNF-2B
3 1
Approximate weight (lbs) 1
12
8 23 17 4 1
2
8 Ø 1
“0” Travel: 17 1 64 41 D Ø1
1 2
3 Ø3 4 Holes 4 2 2
4
Per inch travel: 0.6 4
on 2.750 BC
7
Grease: 0.5 13 16 15
1 Ø 4 Holes 1 5
Ø1
82 32 16 2 8 - 18 UNF-2B
Closed
Motor Mount Limit Switch Secondary Reducer
see pg 180-181 see pg 196-201 see pg 182-187
3 Ø .625 TYP.
2 + Travel 4
1
12
1 29
132
Caution: Jack is self-lowering. Lifting screw must be secured to prevent rotation for non-keyed units.
ONLINE
2.5HL-BSJ TOP VIEW 2.5HL-BSJ-U UPRIGHT 2.5HL-BSJ-I INVERTED 2.5HL-BSJ-UR UPRIGHT ROTATING 2.5HL-BSJ-IR INVERTED ROTATING 2.5HL-BSJ-UK UPRIGHT KEYED 2.5HL-BSJ-IK INVERTED KEYED
Ø .787
.786
1 5 2 Sq.
3 11 7
8 - 18 UNF-2A
5
1 8 + Travel 1
18 1
2 8 8 2 4 + Travel
TYP. TYP. Clockwise Ball nut position A 13
rotation 316
raises load Specify position B
3 1
1 3 Ø3 4 for opposite 3 Ø3 4
18 74 74 51
1 Ø .500
.498 TYP. 3 Closed 64
6 1.752 Closed 3 Ø1 4
4 68
1.750 3 3
1 1 1 68 L 11 68
5 × ×1 7 3 16 6
4 3 7 8 16 1 28 Ø3 4
28 1 8 Keyway 11 L 51
TYP. 2 1.755 16 64
1.745
1 3 Ball nut position A
2R 1 9 13
Ø 32 1
5
+ Travel 29 1 Ø1 4 13 3
Ø3 4
2 3 16 Specify position B
216 1
16 8 Ø1
32 16 Closed 1
1
2 4 + Travel
TYP. TYP. 4 Holes 18 for opposite 2 Sq. 1
216 Closed
NON-KEYED KEYED
Turns of Max Input Max Allowable Tare Drag Backdrive Max Worm Speed Max Load at Max Worm Speed Max Load at
Worm for 1” Torque Input Torque Holding Torque Torque to raise 1 lb at Rated Load 1,750 rpm Torque to raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio Travel (in-lb) (hp) (in-lb) (ft-lb) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
2.5HL-BSJ
6:1 6 202 2 5 14 .0404 624 1,783 .0444 567 1,620
Capacity: 2.5 tons
Screw: 1000-1000
12:1 12 122 11⁄2 5 6 .0244 775 2,214 .0268 705 2,013
24:1 24 85 1
⁄2 5 5 .0170 371 1,059 .0187 337 964
Screw Specs: 2.5HL-BSJ DOUBLE CLEVIS 2.5HL-BSJ Ball Nut and Flange 2.5HL-BSJ Options
Root diameter (in): 0.820 1.03 Top Plate (optional): 9000-00-01 Clevis End (optional): 9001-00-01
.625
Drag torque (in-lb): 5 1 1
1 Ø 1.587 1.06 R
5 1 Ø
.635
2 8 - 18
Start torque = 1.5 × Running 1 5 1
3 B.C. UNF-2B
12 3 3
Torque 8 32 Ø 17 4 1
1
3 64 2
1 41 D 1 1
Approximate weight (lbs) 4 3 D
4
4 Holes
4 Ø1
2
2
2
on 2.750 BC
“0” Travel: 17
7
Per inch travel: 0.6 8
1
13 16 15
2 Ø 4 Holes 1 5
Grease: 0.5 Closed 32 16 Ø1
2 8 - 18 UNF-2B
Motor Mount Limit Switch Secondary Reducer
see pg 180-181 see pg 196-201 see pg 182-187
3 Ø.625
2 + Travel 4 TYP.
1
12
1 29
132
Caution: Jack is self-lowering. Lifting screw must be secured to prevent rotation for non-keyed units.
ONLINE
3-BSJ TOP VIEW 3-BSJ-U UPRIGHT 3-BSJ-I INVERTED 3-BSJ-UR UPRIGHT ROTATING 3-BSJ-IR INVERTED ROTATING 3-BSJ-UK UPRIGHT KEYED 3-BSJ-IK INVERTED KEYED
Clockwise 15 5
1 3 316 Ø3 8
32 116 rotation 5 Ball nut position A 5 11
raises load Ø3 8 Specify position B 88
TYP. TYP. 5 16
.625 88 for opposite Closed
1 Ø
14 .623 TYP. Closed 3
Ø1 4
1
1.705 Ø4 8 1 5
3 3 74 5 1 7
74 8
1 1.703 16 × 32 × 1 1
74 L 8
32
1 TYP. 3 Keyway L
1 4 TYP. TYP.
1 13 1 11
2 5 Ø3 2 16
1 2 1.755 16 Ball nut position A
8
2R 1 3
13 1.745 15 Specify position B
32 Ø 32 3 16 1
TYP. 1 for opposite 1 Ø3 2
TYP. 4 Holes 3 18 2 4 + Travel
Equal to travel 21 2 Closed Ø1 4 2 Closed
Ø132
2 Sq.
NON-KEYED KEYED
Turns of Max Input Max Allowable Tare Drag Backdrive Max Worm Speed Max Load at Max Worm Speed Max Load at
Worm for 1” Torque Input Torque Holding Torque Torque to raise 1 lb at Rated Load 1,750 rpm Torque to raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio Travel (in-lb) (hp) (in-lb) (ft-lb) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
3-BSJ
6:1 14.53 100 2 6 6 .0167 1,260 4,313 .0184 1,142 3,914.
Capacity: 3 tons
Screw: 1171-0413 24:1 58.10 42 ⁄2
1
6 2 .0070 750 2,572 .0077 682 2,338.
ONLINE
5-BSJ & 5HL-BSJ TOP VIEW 5-BSJ-U & 5HL-BSJ-U 5-BSJ-I & 5HL-BSJ-I 5-BSJ-UR & 5HL-BSJ-UR 5-BSJ-IR & 5HL-BSJ-IR 5-BSJ-UK & 5HL-BSJ-UK 5-BSJ-IK & 5HL-BSJ-IK
UPRIGHT INVERTED UPRIGHT ROTATING INVERTED ROTATING UPRIGHT KEYED INVERTED KEYED
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 10 1 L(min) = travel + 6
NON-KEYED KEYED
Max Input Max Allowable Tare Drag Backdrive Max Worm Speed Max Load at Max Worm Speed Max Load at
Turns of Worm Torque Input Torque Holding Torque Torque to raise 1 lb at Rated Load 1,750 rpm Torque to raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio for 1” Travel (in-lb) (hp) (in-lb) (ft-lb) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
5-BSJ
6:1 12.66 183 3 10 14 .0183 1,033 5,904 .0201 941 5,375
Capacity: 5 tons
Screw: 1500-0473
24:1 50.66 73 3
⁄4 10 5 .0073 547 3,700 .0080 590 3,376
5-HL-BSJ
6:1 6 387 3 10 30 .0387 498 2,792 .0426 444 2,537
Capacity 5 tons
Screw: 1500-1000
24:1 24 153 3
⁄4 10 10 .0153 308 1,765 .0168 280 1,600
Screw Specs: 5-BSJ-DC & 5HL-BSJ-DC DOUBLE CLEVIS 5-BSJ Ball Nut and Flange 5-BSJ & 5HL-BSJ Options
Root diameter (in): 1.140 Top Plate (optional): 9000-00-02 Clevis End (optional): 9001-00-02
11 13 1.977
Start torque = 1.5 × Running 4 4
3 B.C. 1
1
1 4 1.000
Torque 22 Ø 2.625
7 1.613 R 1-12 UNF-2B Ø
1.010
5 1
Approximate weight (lbs) 1
14
8 4
16 17 Ø4 1 3 1
4 2
1
Ø 2 Ø1 4 3 2
“0” Travel: 35 Ø4
15 32 4
4
16 4 Holes
Per inch travel: 0.6 on 4.062 BC 5
Grease: 1 12 15 Ø
11
4 Holes
8 13
16 1
Closed 16 16 3
Ø1 1-12 UNF-2B
5HL-BSJ Ball Nut and Flange 4
Motor Mount Limit Switch Secondary Reducer
1.718 see pg 180-181 see pg 196-201 see pg 182-187
1.720 R
Ø 2.625
3 3 + Travel 1 35
4 17
1 Ø 1.000 TYP.
8
Ø
22 15 32
Ø4
1 16 4 Holes
1
1
14
4 23 on 4.125 BC
8
Caution: Jack is self-lowering. Lifting screw must be secured to prevent rotation for non-keyed units.
ONLINE
10-BSJ & 10HL-BSJ TOP VIEW 10-BSJ-U & 10HL-BSJ-U 10-BSJ-I & 10HL-BSJ-I 10-BSJ-UR & 10HL-BSJ-UR 10-BSJ-IR & 10HL-BSJ-IR 10-BSJ-IK & 10HL-BSJ-IK 10-BSJ-IK & 10HL-BSJ-IK
UPRIGHT INVERTED UPRIGHT ROTATING INVERTED ROTATING UPRIGHT KEYED INVERTED KEYED
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 10 3 L(min) = travel + 6
NON-KEYED KEYED
Turns of Max Input Max Allowable Tare Drag Backdrive Max Worm Speed Max Load at Max Worm Speed Max Load at
Worm for 1” Torque Input Torque Holding Torque Torque to raise 1 lb at Rated Load 1,750 rpm Torque to raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio Travel (in-lb) (hp) (in-lb) (ft-lb) (in-lb) (rpm) (lbs) (in-lb) (rpm) (lbs)
10-BSJ
8:1 16.88 302 5 20 13 .0151 1,043 11,925 .0166 949 10,847
Capacity: 10 tons
Screw: 1500-0473
24:1 50.66 153 11⁄2 20 4 .0077 618 7,016 .0085 556 6,355
10-HL-BSJ
8:1 8 638 5 20 26 .0319 494 5,645 .0351 449 5,132
Capacity 10 tons
Screw: 1500-1000
24:1 24 323 11⁄2 20 6 .0162 293 3,334 .0178 266 3,044
Screw Specs: 10-BSJ-DC & 10HL-BSJ-DC DOUBLE CLEVIS 10-BSJ Ball Nut and Flange 10-BSJ & 10HL-BSJ Options
Root diameter (in): 1.140 1 Top Plate (optional): 9000-00-04 Clevis End (optional): 9001-00-04
1
1 2 1
Start torque = 1.5 × Running Torque 4 1.977 4 1 B.C. 4
Ø
1.000
8
Approximate weight (lbs) 2
1
Ø 2.625
1-12 UNF-2B
1
1
1
1.010
2 7 1.613 R 4 2
“0” Travel: 50 1 8 4
5 53 D Ø2 3 2
1 16 4 4
Per inch travel: 0.8 4 Ø
17 4
15 32
Grease: 1.5 Ø4
16 4 Holes 5
on 4.062 BC 13 8 13
Ø 4 Holes 1
1 16 16 Ø2 1-12 UNF-2B
13
8
Closed Motor Mount Limit Switch Secondary Reducer
10HL-BSJ Ball Nut and Flange see pg 180-181 see pg 196-201 see pg 182-187
1.977
Ø 2.625 1.720 R
1 41
7 132 3 64 17
3 + Travel 1 1 Ø 1.000 TYP. Ø
8 4 15 32
1 Ø4 4 Holes
2 16
2 on 4.125 BC
1 7
1 2
4 8
Caution: Jack is self-lowering. Lifting screw must be secured to prevent rotation for non-keyed units.
ONLINE
20-BSJ & 20HL-BSJ 20-BSJ-U & 20HL-BSJ-U 20-BSJ-I & 20HL-BSJ-I 20-BSJ-UR & 20HL-BSJ-UR 20-BSJ-IR & 20HL-BSJ-IR 20-BSJ-UK & 20HL-BSJ-UK 20-BSJ-IK & 20HL-BSJ-IK
TOP VIEW UPRIGHT INVERTED UPRIGHT ROTATING INVERTED ROTATING UPRIGHT KEYED INVERTED KEYED
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 14 1 L(min) = travel + 8 7
2 16
3 1
NON-KEYED KEYED
Max Input Max Allowable Tare Drag Backdrive Max Worm Speed Max Load at Max Worm Speed Max Load at
Turns of Worm Torque Input Torque Holding Torque Torque to raise 1 lb at Rated Load 1,750 rpm Torque to raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio for 1” Travel (in-lb) (hp) (in-lb) (ft-lb) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
20-BSJ
8:1 16 626 71⁄2 40 27 .0157 755 17,204 .0173 683 15,613
Capacity: 20 tons
Screw: 2250-0500
24:1 48 314 21⁄2 40 7 .0079 501 11,397 .0087 453 10,349
20-HL-BSJ
8:1 8 1,253 71⁄2 40 54 .0313 377 8,629 .0344 343 7,840
Capacity 20 tons
Screw: 2250-1000
24:1 24 628 21⁄2 40 13 .0157 251 5,737 .0173 228 5,211
Screw Specs: 20-BSJ Ball Nut and Flange 20-BSJ & 20HL-BSJ Options
Root diameter (in): 1.850 2.561 2.272 R Top Plate (optional): 9000-00-06 Clevis End (optional): 9001-00-06
Start torque = 1.5 × Running Torque Ø 3.375
3 13 1.250
64 5 B.C. 4 Ø
3
Approximate weight (lbs) 9
116 Ø 21 1
4 1 1.260
32 1
“0” Travel: 85 3 6 Holes
2
11
3
Ø5 8 on 4.375 BC Ø7 Ø2 3 5
Per inch travel: 1.5 4 16
Grease: 2.2
13 5
Ø 4 Holes 1 3 3
16 8 2 16 Ø2 1 -12 UN-2B
20HL-BSJ Ball Nut and Flange 4 4
ONLINE
30-BSJ & 30HL-BSJ 30-BSJ-U & 30HL-BSJ-U 30-BSJ-I & 30HL-BSJ-I 30-BSJ-UR & 30HL-BSJ-UR 30-BSJ-IR & 30HL-BSJ-IR 30-BSJ-UK & 30HL-BSJ-UK 30-BSJ-IK & 30HL-BSJ-IK
TOP VIEW UPRIGHT INVERTED UPRIGHT ROTATING INVERTED ROTATING UPRIGHT KEYED INVERTED KEYED
For ordering, specify “L” dimension For ordering, specify “L” dimension
3
L(min) = travel + 18 8 L(min) = travel + 11
Ø 2.361 13 4
1
Sq.
1 2.360 4 2
16
1 1 3
3 3 Ø5 3 13 Ø7 4
3 2 4 + Travel 4 Closed
1 3 1 D 1 4 Closed 16 1 16
1 R 8 1 + Travel 1 4.005 16 4 Sq.
8 5 3 2 Ø 42 2
8 4 4 Holes 3.995
TYP. TYP.
NON-KEYED KEYED
Max Input Max Allowable Tare Drag Backdrive Max Worm Speed Max Load at Max Worm Speed Max Load at
Turns of Worm Torque Input Torque Holding Torque Torque to raise 1 lb at Rated Load 1,750 rpm Torque to raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio for 1” Travel (in-lb) (hp) (in-lb) (ft-lb) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
30-BSJ
102⁄3:1 16.16 989 11 60 21 .0162 715 24,515 .0178 649 22,250
Capacity: 30 tons
Screw: 3000-0660
32:1 48.48 503 31⁄2 60 5 .0084 438 15,006 .0092 399 13,680
30HL-BSJ
102⁄3:1 7.11 2,292 11 60 67 .0367 315 10,794 .0404 286 9,805
Capacity 30 tons
Screw: 3000-1500
32:1 21.33 1,144 31⁄2 60 15 .0191 193 6,600 .0210 175 6,000
Screw Specs: 30-BSJ Ball Nut and Flange 30-BSJ & 30HL-BSJ Options
Root diameter (in): 2.480 Top Plate (optional): 9000-00-08 Clevis End (optional): 9001-00-07
3.349
Start torque = 1.5 × Running Torque Ø 4.750 2 1.750
3.059 R 6 B.C. Ø
Approximate weight (lbs) 5 1 -12 UN-2B 1.760
9 2 1
16 4 2
“0” Travel: 220 2 25 1
2
11
3
Ø Ø8 2 31 D 5
Per inch travel: 2.4 32
8 Holes
2 16
3
Grease: 3.5 Ø7 8 on 6.25 BC
1 3 1 1
Ø 1 4 Holes 1
30HL-BSJ Ball Nut and Flange 16 4 3 16 Ø3
2
2
4
-12 UN-2B
ONLINE
50-BSJ TOP VIEW 50-BSJ-U UPRIGHT 50-BSJ-I INVERTED 50-BSJ-UR UPRIGHT ROTATING 50-BSJ-IR INVERTED ROTATING 50-BSJ-UK UPRIGHT KEYED 50-BSJ-IK INVERTED KEYED
NON-KEYED KEYED
Max Input Max Allowable Tare Drag Backdrive Max Worm Speed Max Load at Max Worm Speed Max Load at
Turns of Worm Torque Input Torque Holding Torque Torque to Raise 1 lb at Rated Load 1,750 rpm Torque to Raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio for 1” Travel (in-lb) (hp) (in-lb) (ft-lb) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
50-BSJ
102⁄3:1 10.66 2,560 16 90 40 .0256 394 22,509 .0281 359 20,506
Capacity: 50 tons
Screw: 4000-1000
Caution: Jack is self-lowering. Lifting screw must be secured to prevent rotation for non-keyed units.
ONLINE
75-BSJ TOP VIEW 75-BSJ-U UPRIGHT 75-BSJ-I INVERTED 75-BSJ-UR UPRIGHT ROTATING 75-BSJ-IR INVERTED ROTATING 75-BSJ-UK UPRIGHT KEYED 75-BSJ-` INVERTED KEYED
3.250 11 5 Sq.
Ø 4 + Travel
4 1 5 1 3.249 16
3 -12 UN-2A 3 + Travel 3 1
4 16 4 Ø7 4
12 1 Clockwise
TYP. 58 11
rotation 11 1
TYP. raises load Ball nut position A 16 1
8
Ø 11 Specify position B
1.750 27 27
Ø 1 for opposite
7
316 1.748 TYP. Closed
13 2 D 1 Closed 1 1
19 22 2 22 2 22
1 Ø7 2
6.003 22 2
L 1 3
6.000 3 3 1 1111 4
23 8 × 16 × 2 2 1 16 Ø7 L Ball nut position A
1 3 1
1 1 Keyway TYP. 2 Specify position B 1
92 72 4 8
for opposite
11
11
16 11 1
1 1 1 4 16 Ø7
7 5 Ø 2 8 4 Holes 5.505 5 4 Closed Ø7 1 4 1
1 + Travel Ø6 3 + Travel 5 Closed
2R TYP. TYP. 2 5.495 4 5 Sq. 4
NON-KEYED KEYED
Max Input Max Allowable Tare Drag Backdrive Max Worm Speed Max Load at Max Worm Speed Max Load at
Turns of Worm Torque Input Torque Holding Torque Torque to Raise 1 lb at Rated Load 1,750 rpm Torque to Raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio for 1” Travel (in-lb) (hp) (in-lb) (ft-lb) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
75-BSJ
102⁄3:1 10.66 3,660 28 155 110 .0244 482 41,326 .0268 439 37,627
Capacity: 75 tons
Screw: 4000-1000
32:1 32 1,680 9 155 25 .0112 338 28,970 .0123 307 26,352
Caution: Jack is self-lowering. Lifting screw must be secured to prevent rotation for non-keyed units.
ONLINE
100-BSJ TOP VIEW 100-BSJ-U UPRIGHT 100-BSJ-I INVERTED 100-BSJ-UR UPRIGHT ROTATING 100-BSJ-IR INVERTED ROTATING
NON-KEYED KEYED
Max Input Max Allowable Tare Drag Backdrive Max Worm Speed Max Load at Max Worm Speed Max Load at
Turns of Worm Torque Input Torque Holding Torque Torque to Raise 1 lb at Rated Load 1,750 rpm Torque to Raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio for 1” Travel (in-lb) (hp) (in-lb) (ft-lb) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
100-BSJ
102⁄3:1 10.66 4,880 32 205 152 .0244 413 47,232 – – –
Capacity: 100 tons
Screw: 4000-1000
Caution: Jack is self-lowering. Lifting screw must be secured to prevent rotation for non-keyed units.
ONLINE
Nook Machine Screw Jacks are fitted with Nook’s own PowerAc™ BACKLASH - Backlash (lash) is the relative axial movement between OVERTURNING LOAD - A load that tends to rotate the nut radially
FIG. 1
Acme Lead Screws and Nuts. Nook Industries manufactures a screw and nut without rotation of the screw or nut. The axial around the longitudinal axis of the screw. (See FIG. 2)
PowerAc™ precision acme screws by thread rolling for ActionJac™ movement between a new PowerAc™ acme nut and screw will SIDE LOAD - A load that is applied radially to the nut. (See FIG. 2)
Worm Gear Machine Screw Jacks, a process that produces high- range from .003” to .015” depending on size. Lash in ball screws
precision screws. Nook Acme Screw products feature centralizing will remain constant during normal use. LOAD LOAD
CAUTION - Although a side load will not prevent the lead screw from
thread forms for smooth, no-wedging performance. operating, the nut is not designed to operate with a side load, such
as those generated from pulleys, drive belts, misalignment, etc.
STRAIGHTNESS - PowerAc™ Acme Lead Screws are straight LOAD DEFINITIONS
Nook machine screw jacks are used in large material transfer applications. Nook machine screw jacks are used in solar applications.
35-MSJ 10 ⁄3:1
2
35 3 ⁄4
3
.667 3.009 16 3,450 11 200 8,035 .0493 50 1AB-MSJ 20:1 1 0.750 0.200 0.502 100 21 0.26 750 855 0.011 3.0
32:1 35 3 ⁄4
3
.667 3.009 48 1,800 3 ⁄2
1
122 4,904 .0257 50 2AB-MSJ 25:1 2 1.000 0.250 0.698 100 41 0.51 780 1,780 0.010 4.0
50-MSJ 102⁄3:1 50 41⁄2 .667 3.782 16 5,555 16 181 10,382 .0555 100 2.5AB-MSJ 25:1 2.5 1.000 0.250 0.698 100 51 0.51 625 1,785 0.010 5.0
32:1 50 41⁄2 .667 3.782 48 3,014 5 104 5,982 .0301 100 5AB-MSJ 25:1 5 1.500 0.250 1.196 100 116 0.67 365 2,085 0.012 10.0
75-MSJ 10 ⁄3:1
2
75 5 .667 4.286 16 8,236 28 214 18,368 .0549 155 10AB-MSJ 25:1 10 2.000 0.250 1.694 100 309 1.38 282 3,225 0.015 20.0
32:1 75 5 .667 4.286 48 3,780 9 150 12,862 .0252 155 15AB-MSJ 25:1 15 2.250 0.250 1.944 100 505 1.33 165 2,835 0.017 20.0
100-MSJ 10 ⁄3:1
2
100 6 .667 5.254 16 13,166 32 153 17,330 .0665 205 20AB-MSJ 25:1 20 2.500 0.250 2.193 100 712 2.32 205 4,690 0.018 40.0
32:1 100 6 .667 5.254 48 7,460 121⁄2 106 11,941 .0377 205
NOTES (CONT’D):
NOTES: 4) Overload capacity of the Machine Screw Jack is as follows: 10% 11) Tare drag torque need only be added if operating under 25%
1) The recommended maximum speed is 1,800 rpm provided that for dynamic loads, 30% for static loads. 7) Accessories such as boots, limit switches, top plates and clevises rated load.
the recommended horsepower and temperature are not exceeded. are available.
5) Machine Screw Jacks having gear ratios between 20:1 and
Torque to Number
2) Input torque is shown as torque to lift one pound of load. Starting 32:1 are self-locking and will hold loads without backdriving in the 8) Catalog dimensions are representative only and are subject to raise one × of pounds × rpm
absence of vibrations. All other ratios may require a brake to prevent Horsepower
Torque is 100% greater than torque shown. For loads less than 25% change without notice. For construction, use only certified prints. pound to be raised
per jack =
of rated loads add tare drag torque. backdriving.
9) Units are not to be used as personnel support or movement. 63,025
3) Maximum allowable horsepower ratings are based on a 25% duty 6) All units are suitable for intermittent operation providing that the
10) End-of-travel stops are not provided.
cycle at standard ambient temperature, with 1 minute on 2 minute housing temperature including ambient is not lower than -20°F or 12) Starting Torque is 100% greater than torque shown.
off cycles. For operation at higher duty cycles or repeated use over higher than +200°F. Factory supplied grease in standard units will 13) Measurements listed are for non-keyed jacks. See individual jack
any segment of the total travel, temperature must be monitored and operate in this range. For higher or lower operating temperature pages for keyed jack info.
remain less than 200°F. ranges consult Nook Industries, Inc.
300,000 L
ONE END FIXED UR = Upright Rotating IK = Inverted Keyed Travel Nuts
ONE END FREE IR = Inverted Rotating L shown in
200,000 100.0–TON position "A" L
75.0–TON
GEAR RATIO
100,000 50.0–TON
35.0–TON
B Refer to product pages for available ratios.
30.0–TON
BOTH ENDS SHAFT ORDER CODE TRAVEL
L
20.0–TON SUPPORTED For Translating Screw Models (U and I) use actual Travel in inches.
30,000 15.0–TON BY CLEVIS For Rotating Screw Models (UR and IR) use "L" Dimension in Inches.
20,000 10.0–TON
ENDS
10BT - 1
Load (lbs.)
MJ-xx TOP VIEW MJ-xx-U UPRIGHT MJ-xx-I INVERTED MJ-xx-UR UPRIGHT ROTATING MJ-xx-IR INVERTED ROTATING MJ-xx-UK UPRIGHT KEYED MJ-xx-IK INVERTED KEYED
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 3 21 L(min) = travel + 1 21
32 32
.313 Acme nut
Ø .312
5 position A,
Clockwise 3 8 Specify position B
21 11 rotation 8 - 24 UNF-2A
3 4 8 raises load 1 Equal to travel for opposite 1
4 TYP. 3 38
1 2 1 2
38 Ø2 4 8
Closed
.375 Closed 5
.941 Ø .373 TYP. 3 5 3 L 1 3 2
8
28 3 28 17 Ø1 8 28
.938 16 1.003 1 4 3
L
† Lift shafts are made from 300 series stainless steel material except for 5⁄8-5 and 5⁄8-8. * Torque to Raise 1 lb
** Travel is based on one end fixed and the other end free. See page 68 for other mounting considerations.
Mini Jack Standard: MJAB-xx-U MJAB-xx-I MINI JACK Acme Nut and Flange MINI JACK Options
Start torque = 2 × Running Torque UPRIGHT ANTI-BACKLASH INVERTED ANTI-BACKLASH 9 Top Plate (optional): 9000-00-12 Clevis End (optional): 9001-00-12
Approximate weight (lbs) 1
1 32 Ø1 1
Ø 32 4 Holes 1
8 on Ø1.75 B.C. 1 2 .312
“0” Travel: 2.5 1
1 B.C.
2 3 - 24 UNF-2B
Ø
.319
8 1
Per inch travel: 0.2 3
8
1 2 1
Grease: 0.5 Closed Ø2 4 Ø2 1 Ø
3
1
3
3 3 4 4 4
2 2 17
8 8
32
9 5 13
Ø 4 Holes 3 3 - 24 UNF-2B
1
32 16 16 Ø 8
1 Closed 4
8
1-MSJ TOP VIEW 1-MSJ-U UPRIGHT 1-MSJ-I INVERTED 1-MSJ-UR UPRIGHT ROTATING 1-MSJ-IR INVERTED ROTATING 1-MSJ-UK UPRIGHT KEYED 1-MSJ-IK INVERTED KEYED
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 5 1 L(min) = travel + 2 5
32 32
.500
Ø
.499
3 7 3 1
116 Clockwise 5
TYP. rotation 4 2 -13 UNC-2A Equal to 8 Acme nut
TYP. raises load 1
Travel position A, 34 3
NON-KEYED KEYED
Turns of Max Input Max Allowable Tare Drag Max Worm Speed Max Load at Max Worm Speed Max Load at
Worm for 1” Torque Input Torque Torque to Raise 1 lb at Rated Load 1,750 rpm Torque to Raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio Travel (in-lb) (hp) (in-lb) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
1-MSJ
5:1 25 45 1
⁄2 3 .0225 700 800 .0259 608 695
Capacity: 1 ton
Screw: 3⁄4-5
20:1 100 21 1
⁄4 3 .0105 750 857 .0121 651 744
Screw Specs: 1AB-MSJ-U 1AB-MSJ-I 1-MSJ-DC DOUBLE CLEVIS 1-MSJ Acme Nut and Flange 1-MSJ Options
Root diameter (in): 0.502 UPRIGHT ANTI-BACKLASH INVERTED ANTI-BACKLASH Top Plate (optional): 9000-00-11 Clevis End (optional): 9001-00-11
1 17 1 .312
Screw lead (in): 0.200 1 14 32
Ø1 8
1
1 Ø
2 17 2 .322
Start torque = 2 × Running Torque Ø 64 4 Holes 21 2 - 13
3 9 UNC-2B
1 32 on 2.094 B.C. 2 B.C. 3
Approximate weight (lbs) 3
4
8 3
“0” Travel: 5.5 8 5 Ø31 1 13 4
Ø2 8 Ø1 1
2 4 16
Per inch travel: 0.3 13
4 32
Grease: 0.5 5 3
Closed Closed 7 8 13 1
13 13 Ø 4 Holes Ø1 1
3 32 3 32 16 16 4 -13 UNC-2B
2
3
1 8 Closed 1 Ø .312 Typ.
1 2 + Travel
3
4
1 5
3 116
2 8
ONLINE
2-MSJ TOP VIEW 2-MSJ-U UPRIGHT 2-MSJ-I INVERTED 2-MSJ-UR UPRIGHT ROTATING 2-MSJ-IR INVERTED ROTATING 2-MSJ-UK UPRIGHT KEYED 2-MSJ-IK INVERTED KEYED
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 6 15 L(min) = travel + 3 5
Clockwise 16 8
1 3 rotation
32 116 .625 Acme nut
raises load Ø
TYP. TYP. 5 .624 position A,
7
.500 8 8 -18 UNF-2A Equal to
3 Specify position B
Ø
.498 TYP. 4 15
NON-KEYED KEYED
Turns of Max Input Max Allowable Tare Drag Max Worm Speed Max Load at Max Worm Speed Max Load at
Worm for 1” Torque Input Torque Torque to Raise 1 lb at Rated Load 1,750 rpm Torque to Raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio Travel (in-lb) (hp) (in-lb) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
2-MSJ
6:1 24 100 2 4 .0250 1,260 2,881 lbs. .0288 1,096 2,505
Capacity: 2 tons
Screw: 1-4
12:1 48 62 11⁄2 4 .0154 1,525 3,486 lbs. .0177 1,326 3,031
24:1 96 42 1
⁄2 4 .0105 750 1,715 lbs. .0121 651 1,488
Screw Specs: 2AB-MSJ-U 2AB-MSJ-I 2-MSJ-DC DOUBLE CLEVIS 2-MSJ Acme Nut and Flange 2-MSJ Options
Root diameter (in): 0.698 UPRIGHT ANTI-BACKLASH INVERTED ANTI-BACKLASH Top Plate (optional): 9000-00-01 Clevis End (optional): 9001-00-01
.625
Screw lead (in): 0.250 3
4
1 5
8 - 18 1 Ø
.635
Ø2
Start torque = 2 × Running Torque 1 9
3 B.C. UNF-2B
12 Ø 3
Approximate weight (lbs) 2 32 4 Holes
on 2.750 B.C. 1
1
4
3 41 D 1 1 2
“0” Travel: 15 4 4 Ø1
2 2
2
1
Per inch travel: 0.45 5
5 16 1
5 Ø3 4
8 7
Grease: 0.5 54
Closed 13 16 15
Closed Ø 4 Holes 1 5
4 4 32 16 Ø1
2 8 - 18 UNF-2B
3 21
4 132
2R-MSJ TOP VIEW 2R-MSJ-U UPRIGHT 2R-MSJ-I INVERTED 2R-MSJ-UR UPRIGHT ROTATING 2R-MSJ-IR INVERTED ROTATING 2R-MSJ-UK UPRIGHT KEYED 2R-MSJ-IK INVERTED KEYED
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 6 15 L(min) = travel + 3 5
1 16 8
3 2 TYP.
3
116 Clockwise .625
TYP. rotation .624 D
raises load 5 3
11 7 8 -18 UNF-2A Equal to 4
Acme nut 15
NON-KEYED KEYED
Turns of Max Input Max Allowable Tare Drag Max Worm Speed Max Load at Max Worm Speed Max Load at
Worm for 1” Torque Input Torque Torque to Raise 1 lb at Rated Load 1,750 rpm Torque to Raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio Travel (in-lb) (hp) (in-lb) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
2R-MSJ
6:1 24 100 2 4 .0250 1,260 2,881 .0288 in-lb 1,096 rpm 2,505 lbs.
Capacity: 2 tons
Screw: 1-4
12:1 48 62 11⁄2 4 .0154 1,525 3,486 .0177 in-lb 1,326 rpm 3,031 lbs.
24:1 96 42 1
⁄2 4 .0105 750 1,715 .0121 in-lb 651 rpm 1,488 lbs.
Screw Specs: 2RAB-MSJ-U 2RAB-MSJ-I 2R-MSJ-DC DOUBLE CLEVIS 2R-MSJ Acme Nut and Flange 2R-MSJ Options
Root diameter (in): 0.698 UPRIGHT ANTI-BACKLASH INVERTED ANTI-BACKLASH 3 1
Ø2
Top Plate (optional): 9000-00-01 Clevis End (optional): 9001-00-01 .625
4 Ø
Screw lead (in): 0.250 1 9
5 1 .635
12 Ø 8 - 18
Start torque = 2 × Running Torque 2 32 4 Holes
on 2.750 B.C.
3 B.C. UNF-2B
3 3 1
Approximate weight (lbs) 4
1
4
1
1
2
Ø3 2 1 41 D 1 2
“0” Travel: 15 1
54
5 Ø3 4
4 Ø1
2 2
5 8
Per inch travel: 0.45 516 Closed
13
Closed 1 7
Grease: 0.5 4 2
2
1.750 16 13 16 15 1 5
1.740 Ø 4 Holes Ø1
4 32 16 2 8 - 18 UNF-2B
Motor Mount Limit Switch
2 + Travel 3 Ø .406 TYP.
4 see pg 180-181 see pg 196-201
1
2 Closed 12
3 21
4 132
ONLINE
2.5-MSJ TOP VIEW 2.5-MSJ-U UPRIGHT 2.5-MSJ-I INVERTED 2.5-MSJ-UR UPRIGHT ROTATING 2.5-MSJ-IR INVERTED ROTATING 2.5-MSJ-UK UPRIGHT KEYED 2.5-MSJ-IK INVERTED KEYED
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 6 13 L(min) = travel + 3 11
16 16
1 1 Clockwise .625
3
2 TYP. 18 rotation 3
.624 D
TYP. raises load
4
5 Acme nut 13
316
1
Ø .500 TYP. 8 -18 UNF-2A 11 position A,
NON-KEYED KEYED
Turns of Max Input Max Allowable Tare Drag Max Worm Speed Max Load at Max Worm Speed Max Load at
Worm for 1” Torque Input Torque Torque to Raise 1 lb at Rated Load 1,750 rpm Torque to Raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio Travel (in-lb) (hp) (in-lb) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
2.5-MSJ
6:1 24 126 2 5 .0252 1,000 2,858 .0290 869 2,483
Capacity: 2.5 tons
Screw: 1-4
12:1 48 74 11⁄2 5 .0148 1,277 3,650 .0170 1,110 3,174
24:1 96 53 1
⁄2 5 .0106 594 1,699 .0122 516 1,476
Screw Specs: 2.5AB-MSJ-U 2.5AB-MSJ-I 2.5-MSJ-DC DOUBLE CLEVIS 2.5-MSJ Acme Nut and Flange 2.5-MSJ Options
Root diameter (in): 0.698 UPRIGHT ANTI-BACKLASH INVERTED ANTI-BACKLASH 3 Top Plate (optional): 9000-00-01 Clevis End (optional): 9001-00-01 .625
4 1 Ø
Screw lead (in): 0.250 Ø2 5 1 .635
1
12 8 - 18
Start torque = 2 × Running Torque Ø
9 3 B.C. UNF-2B
3 2 32 4 Holes
on 2.750 B.C.
3 1
Approximate weight (lbs) 4
4
1
1
2
41 D 1 2
“0” Travel: 17 1 4 Ø1 2
53 1 5 Ø3 4 2
Per inch travel: 0.45 8
Closed
54 8
7
Grease: 0.5 4 13 16 15 1 5
4 Ø 4 Holes Ø1
32 16 2 8 - 18 UNF-2B
3 3
29
4 4 132
ONLINE
5-MSJ TOP VIEW 5-MSJ-U UPRIGHT 5-MSJ-I INVERTED 5-MSJ-UR UPRIGHT ROTATING 5-MSJ-IR INVERTED ROTATING 5-MSJ-UK UPRIGHT KEYED 5-MSJ-IK INVERTED KEYED
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 8 3 L(min) = travel + 4 11
4 16
1 3
4 2 TYP. 18 Clockwise
rotation 3 1 -12 UNF-2A 5 Ø 1.000
TYP. raises load 14 + Travel 0.999
8 1
7 .750 Acme nut 3
116 Ø .748 TYP. 1 44 5
NON-KEYED KEYED
Turns of Max Input Max Allowable Tare Drag Max Worm Speed Max Load at Max Worm Speed Max Load at
Worm for 1” Torque Input Torque Torque to Raise 1 lb at Rated Load 1,750 rpm Torque to Raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio Travel (in-lb) (hp) (in-lb) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
5-MSJ
6:1 16 376 3 10 .0376 500 2,873 .0432 437 2,501
Capacity: 5 tons
Screw: 11⁄2-22⁄3
24:1 64 144 3
⁄4 10 .0144 330 1,875 .0166 287 1,627
Screw Specs: 5AB-MSJ-U 5AB-MSJ-I 5-MSJ-DC DOUBLE CLEVIS 5-MSJ Acme Nut and Flange 5-MSJ Options
Root diameter (in): 1.066 UPRIGHT ANTI-BACKLASH INVERTED ANTI-BACKLASH 1 Top Plate (optional): 9000-00-02 Clevis End (optional): 9001-00-02
1 12
Screw lead (in): 0.375 Ø3
3 B.C. 1-12 UNF-2B 1
1 29 14
Start torque = 2 × Running Torque 2
3 32 33 1
Approximate weight (lbs) 64 4 Holes 1 3 14 1
on 4.063 B.C. Ø4 2 Ø1 4 2
“0” Travel: 30.0 7 Closed
15 4
3 2 Ø 1.000
1 Ø4 16 4 0.010
Per inch travel: 0.7 72
2
1
1 3
28
ONLINE
10-MSJ TOP VIEW 10-MSJ-U UPRIGHT 10-MSJ-I INVERTED 10-MSJ-UR UPRIGHT ROTATING 10-MSJ-IR INVERTED ROTATING 10-MSJ-UK UPRIGHT KEYED 10-MSJ-IK INVERTED KEYED
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 8 7 L(min) = travel + 4 11
8 16
1.250
1 Ø
52 7 Clockwise 1.249
18 7
TYP. rotation 1 5 2 Acme nut position A, 48
TYP. 1 1 4 -12 UNF-2A
raises load 12 8 + Travel Specify position B
NON-KEYED KEYED
Turns of Max Input Max Allowable Tare Drag Max Worm Speed Max Load at Max Worm Speed Max Load at
Worm for 1” Torque Input Torque Torque to Raise 1 lb at Rated Load 1,750 rpm Torque to Raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio Travel (in-lb) (hp) (in-lb) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
10-MSJ
8:1 16 753 5 20 .0377 418 4,776 .0434 363 4,149
Capacity: 10 tons
Screw: 2-2
24:1 48 384 11⁄2 20 .0192 246 2,813 .0221 214 2,444
Screw Specs: 10AB-MSJ-U 10AB-MSJ-I 10-MSJ-DC DOUBLE CLEVIS 10-MSJ Acme Nut and Flange 10-MSJ Options
Root diameter (in): 1.410 UPRIGHT ANTI-BACKLASH INVERTED ANTI-BACKLASH 1
14 Top Plate (optional): 9000-00-03 Clevis End (optional): 9001-00-03
2
Screw lead (in): 0.5 Ø3
1
1 -12 UNF-2B
1 1 4 1
Start torque = 2 × Running Torque 22 29
3 32 Ø
33
4 Holes 4 B.C.
8
14
64 on 4.063 B.C. 1
Approximate weight (lbs) 1
14
1
4 1
5 22
“0” Travel: 45.0 78
5 15
Ø416 Ø5 3
4 Ø2 4
1 16 1.000
Closed 72 Ø 1.010
Per inch travel: 1.2 5
58 Closed
Grease: 1.5 5
58 Ø
13 5 Ø2 1
1 -12 UNF-2B
16 8 9 4
4 Holes 116
ONLINE
15-MSJ TOP VIEW 15-MSJ-U UPRIGHT 15-MSJ-I INVERTED 15-MSJ-UR UPRIGHT ROTATING 15-MSJ-IR INVERTED ROTATING 15-MSJ-UK UPRIGHT KEYED 15-MSJ-IK INVERTED KEYED
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 10 1 L(min) = travel + 5 3
2 16
1 7 1.500
5 2 TYP. 18 Clockwise Ø 1.499 Acme nut position A,
rotation 3 1
TYP. raises load 1 2 -12 UNF-2A Specify position B
14 5
2 for opposite
1.000
Ø 0.998 TYP. 8 + Travel 1 1
9 1 5 Ø4 2 Ø4 2
116 84 Ø5 8 6 1
1 92
NON-KEYED KEYED
Max Input Max Allowable Tare Drag Max Worm Speed Max Load at Max Worm Speed Max Load at
Turns of Torque Input Torque Torque to Raise 1 lb at Rated Load 1,750 rpm Torque to Raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio Worm for 1” Travel (in-lb) (hp) (in-lb) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
15-MSJ
8:1 16 1,221 5 20 .0407 258 4,424 .0468 224 3,847
Capacity: 15 tons
Screw: 21⁄4-2
24:1 48 654 11⁄2 20 .0218 244 2,478 .0251 125 2,152
Screw Specs: 15AB-MSJ-U 15AB-MSJ-I 15-MSJ-DC DOUBLE CLEVIS 15-MSJ Acme Nut and Flange 15-MSJ Options
Root diameter (in): 1.684 UPRIGHT ANTI-BACKLASH INVERTED ANTI-BACKLASH 1 1
37
Top Plate (optional): 9000-00-05 Clevis End (optional): 9001-00-05
12 24 1 1
Screw lead (in): 0.5 1 64 Ø3 2
1
1 2 -12 UNF-2B 1
12
1 41 4 8 B.C.
Start torque = 2 × Running Torque 22 Ø 64
1
1 6 Holes 1
Approximate weight (lbs) 1
14 32 on 4.625 B.C. 3
4 1
9 22 1.000
Ø5 4 Ø2 1 4 Ø 1.010
“0” Travel: 55.0 3 1 2 16
84 82 3
Per inch travel: 1.4 Closed
Ø5 4
Closed 1
Grease: 1.5 1 1
62 Ø
13
4 Holes 5 22 D 1
1
-12 UNF-2B
6 2 16 13 2
8 116
ONLINE
20-MSJ TOP VIEW 20-MSJ-U UPRIGHT 20-MSJ-I INVERTED 20-MSJ-UR UPRIGHT ROTATING 20-MSJ-IR INVERTED ROTATING 20-MSJ-UK UPRIGHT KEYED 20-MSJ-IK INVERTED KEYED
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 11 1 L(min) = travel + 5 3
4 16
1.750
Ø
1.749 Acme nut position A,
3 11 3
5 4 TYP. 1 1 -12 UN-2A 1
16 TYP. Clockwise
2 4 2 Specify position B
5 2 for opposite
rotation 1 + Travel
94 8 3
raises load 6
Closed 4 1 1
NON-KEYED KEYED
Turns of Max Input Max Allowable Tare Drag Max Worm Speed Max Load at Max Worm Speed Max Load at
Worm for 1” Torque Input Torque Torque to Raise 1 lb at Rated Load 1,750 rpm Torque to Raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio Travel (in-lb) (hp) (in-lb) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
20-MSJ
8:1 16 1,740 71⁄2 40 .0435 272 6,209 .0500 236 5,402
Capacity: 20 tons
Screw: 21⁄2-2
24:1 48 873 21⁄2 40 .0218 180 4,130 .0251 157 3,587
Screw Specs: 20AB-MSJ-U 20AB-MSJ-I 20-MSJ Acme Nut and Flange 20-MSJ Options
Root diameter (in): 1.908 UPRIGHT ANTI-BACKLASH INVERTED ANTI-BACKLASH Top Plate (optional): 9000-00-06 Clevis End (optional): 9001-00-06
37 1
Screw lead (in): 0.500 1
64 Ø3
2 3
3 14
Start torque = 2 × Running Torque 1 Ø
41 5 B.C. 14
3 64 1
Approximate weight (lbs) 2
3
1
2 1 Ø 1.250
1 Ø5 Ø7 Ø2 3 11 2 2 1.260
“0” Travel: 80.0 9
2
Closed 4 4 5
16
6 Holes
Per inch travel: 1.8 on 4.625 B.C.
3
1 -12 UN-2B
Grease: 2.25 13
Ø16 4 Holes 5 3 4
8 1 Ø2 4
1 2 16
7
7 16
Motor Mount Limit Switch Secondary Reducer
see pg 180-181 see pg 196-201 see pg 182-187
3
3 Closed
16
ONLINE
30-MSJ TOP VIEW 30-MSJ-U UPRIGHT 30-MSJ-I INVERTED 30-MSJ-UR UPRIGHT ROTATING 30-MSJ-IR INVERTED ROTATING 30-MSJ-UK UPRIGHT KEYED* 30-MSJ-IK INVERTED KEYED*
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 13 9 L(min) = travel + 6 3
16 16
2.500
1 Ø 2.499
7 TYP. 2 1 TYP. 2
1 2
4
-12 UN-2A
4 4
Clockwise 13 5 + Travel 3
rotation 10 1
16 8 Acme nut position A, 8 1 3 3
raises load Closed 3 8 12 6 D 6 16 D
Ø7 Specify position B 2 16
NON-KEYED KEYED
Turns of Max Input Max Allowable Tare Drag Max Worm Speed Max Load at Max Worm Speed Max Load at
Worm for 1” Torque Input Torque Torque to Raise 1 lb at Rated Load 1,750 rpm Torque to Raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio Travel (in-lb) (hp) (in-lb) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
30-MSJ
102⁄3:1 16 2,710 11 50 .0452 256 8,764 .0520 222 7,618
Capacity: 30 tons
Screw: 33⁄8-11⁄2
32:1 48 1,411 31⁄2 50 .0235 156 5,364 .0270 136 4,668
Screw Specs: 30AB-MSJ-U 30AB-MSJ-I 30-MSJ Acme Nut and Flange 30-MSJ Options
Root diameter (in): 2.652 UPRIGHT ANTI-BACKLASH INVERTED ANTI-BACKLASH 1 Top Plate (optional): 9000-00-07 Clevis End (optional): 9001-00-08
Ø4
Screw lead (in): 0.667 2 6 B.C. 1 2
2 4 -12 UN-2B
Start torque = 2 × Running Torque 4
1 2
41 2
1 1.750
2 Ø 8 Holes 1 1 2 15 D
Approximate weight (lbs) Ø8 2 Ø3 2 1.760
64 on 6.250 B.C. 1 4
8 16
“0” Travel: 145.0 10
13
3
2
16 Ø7 8
Per inch travel: 2.9 Closed
1
1
Grease: 3.5 1 8
1 Ø116 4 Holes 3
4
2
5
16 3
1
D
2
4
-12 UN-2B
8 8 2
8
ONLINE
35-MSJ TOP VIEW 35-MSJ-U UPRIGHT 35-MSJ-I INVERTED 35-MSJ-UR UPRIGHT ROTATING 35-MSJ-IR INVERTED ROTATING 35-MSJ-UK UPRIGHT KEYED* 35-MSJ-IK INVERTED KEYED*
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 18 3 L(min) = travel + 10 11
8 16
7 1
TYP. 24
3.000
TYP. Clockwise Ø
rotation 2.999
raises load 1 1
2 3 3
4 3-12 UN-2A 2 Acme nut position A, 88 3
1.375 Equal to 12 4 Closed
7 Ø TYP. travel Specify position B 1
2 1.373 1 Ø6
1 16 for opposite Ø6 4
3 4
NON-KEYED KEYED
Turns of Max Input Max Allowable Tare Drag Max Worm Speed Max Load at Max Worm Speed Max Load at
Worm for 1” Torque Input Torque Torque to Raise 1 lb at Rated Load 1,750 rpm Torque to Raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio Travel (in-lb) (hp) (in-lb) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
35-MSJ
102⁄3:1 16 3,450 11 50 .0493 200 8,035 .0570 174 6,950
Capacity: 35 tons
Screw: 33⁄4-11⁄2
32:1 48 1,800 31⁄2 50 .0257 122 4,904 .0295 107 4,273
Screw Specs: 35AB-MSJ-U 35AB-MSJ-I 35-MSJ Acme Nut and Flange 35-MSJ Options
Root diameter (in): 3.009 UPRIGHT ANTI-BACKLASH INVERTED ANTI-BACKLASH Top Plate (optional): 9000-00-013 Clevis End (optional): 9001-00-16
Screw lead (in): 0.667 3
7 4 B.C. 1
22
Start torque = 2 × Running Torque 1 Ø5
3-12 UN-2B
5 2
Approximate weight (lbs) 2 Ø1
1 1 1.531
3 Closed 16 Ø10 2 Ø4 1 4 Ø
“0” Travel: 145.0 12 4 Holes 78 1.541
8
on 7.000 B.C.
Per inch travel: 3.4 8D 3-12 UN-2B
2 Ø9
Grease: 3.5 5
Ø1 8 4 Holes 1 1 5 Ø4
5 4 2 16
5 9
9 8
8
Limit Switch
see pg 196-201
7
3 Closed
16
ONLINE
50-MSJ TOP VIEW 50-MSJ-U UPRIGHT 50-MSJ-I INVERTED 50-MSJ-UR UPRIGHT ROTATING 50-MSJ-IR INVERTED ROTATING 50-MSJ-UK UPRIGHT KEYED* 50-MSJ-IK INVERTED KEYED*
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 17 7 L(min) = travel + 7 3
8 4
3.500
Ø
3.499
Acme nut position A,
Clockwise 4
11 TYP. 1 rotation Specify position B
54 1
raises load 3 -12 UN-2A for opposite
TYP. 3 4 1
7 1.500 + Travel 1 Ø7 Ø7
2 Ø 1.498 TYP. 3 2 10 8
8 14 8 Closed Ø 11 1
15 4
NON-KEYED KEYED
Turns of Max Input Max Allowable Tare Drag Max Worm Speed Max Load at Max Worm Speed Max Load at
Worm for 1” Torque Input Torque Torque to Raise 1 lb at Rated Load 1,750 rpm Torque to Raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio Travel (in-lb) (hp) (in-lb) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
50-MSJ
102⁄3:1 16 5,555 16 100 .0555 181 10,382 .0638 158 9,032
Capacity: 50 tons
Screw: 41⁄2-11⁄2
32:1 48 3,014 5 100 .0301 104 5,982 .0346 91 5,204
Screw Specs: 50AB-MSJ-U 50AB-MSJ-I 50-MSJ Acme Nut and Flange 50-MSJ Options
Root diameter (in): 3.782 UPRIGHT ANTI-BACKLASH INVERTED ANTI-BACKLASH Top Plate (optional): 9000-00-09 Clevis End (optional): 9001-00-09
Screw lead (in): 0.667 Ø6 3
8 B.C. 1 1
4 3 4 -12 UN-2B 3
Start torque = 2 × Running Torque 2
1
1 1
4
1.781
32 22 Ø
Approximate weight (lbs) 6 Ø1 6 Holes 1 1.791
32 on 8.000 B.C. 5
Ø11 Ø5
4
“0” Travel: 280.0 14 7 3
9
8 Ø9 4
Per inch travel: 5.0 Closed
27
Grease: 5.8 27
10 32
10
32 Ø1 3 4 Holes 1 1 1 Ø5
1
3 4 -12 UN-2B
8 4 3 16
Limit Switch
see pg 196-201
1
4 4 Closed
ONLINE
75-MSJ TOP VIEW 75-MSJ-U UPRIGHT 75-MSJ-I INVERTED 75-MSJ-UR UPRIGHT ROTATING 75-MSJ-IR INVERTED ROTATING 75-MSJ-UK UPRIGHT KEYED* 75-MSJ-IK INVERTED KEYED*
For ordering, specify “L” dimension For ordering, specify “L” dimension
7 4-12 UN-2A L(min) = travel + 22 3 L(min) = travel + 10 1
7 1 Clockwise 3 16 1 16 4
3 12 TYP. 5 1 1 1 + Travel
16 8 rotation 3 Ø7 2
TYP. 16 Closed 4 4.250
raises load 4 1 Ø 1
Ø13 4.248 17 Closed
NON-KEYED KEYED
Turns of Max Input Max Allowable Tare Drag Max Worm Speed Max Load at Max Worm Speed Max Load at
Worm for 1” Torque Input Torque Torque to Raise 1 lb at Rated Load 1,750 rpm Torque to Raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio Travel (in-lb) (hp) (in-lb) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
75-MSJ
102⁄3:1 16 8,236 28 155 .0549 214 18,368 .0631 186 15,950
Capacity: 75 tons
Screw: 5-11⁄2
32:1 48 3,780 9 155 .0252 150 12,862 .0290 130 11,180
Limit Switch
see pg 196-201
ONLINE
100-MSJ TOP VIEW 100-MSJ-U UPRIGHT 100-MSJ-I INVERTED 100-MSJ-UR UPRIGHT ROTATING 100-MSJ-IR INVERTED ROTATING
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 2325 L(min) = travel + 10 1
32 4
1 4 Clockwise
11 TYP. rotation 1
2
TYP. raises load 4 4-12 UN-2A 5.000
4 Ø
5 4.998
1.750 1 1 + Travel 5
Ø TYP. Ø10 8 Acme nut position A, 1 1
1.748 8 14 13
Ø 16 Specify position B 4 4
7.500 1 1 for opposite
NON-KEYED KEYED
Turns of Max Input Max Allowable Tare Drag Max Worm Speed Max Load at Max Worm Speed Max Load at
Worm for 1” Torque Input Torque Torque to Raise 1 lb at Rated Load 1,750 rpm Torque to Raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio Travel (in-lb) (hp) (in-lb) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
100-MSJ
102⁄3:1 16 13,166 32 205 .0665 153 17,330 – – –
Capacity: 100 tons
Screw: 6-11⁄2
32:1 48 7,460 121⁄2 205 .0377 106 11,941 – – –
Limit Switch
see pg 196-201
ONLINE
Nook stainless steel machine screw jacks are used extensively in the paper industry.
QUICK REFERENCE
STAINLESS STEEL JACKS
Max Worm NOTES: 7) Accessories such as boots, top plates and clevises are available.
Lifting Turns of Max Input Max Speed at Max Load Torque to Tare Drag 1) The recommended maximum speed is 1,800 rpm provided that
Gear Capacity Screw Dia Screw Root Dia Worm for Torque Input Rated Load at 1,750 Raise 1 lb. Torque 8) Catalog dimensions are representative only and are subject to
the recommended horsepower and temperature are not exceeded. change without notice. For construction, use only certified prints.
MODEL Ratio (tons) (in) Lead (in) (in) 1” Travel (in.-lb.) (hp) (rpm) rpm (lb) (in-lb) (in-lb)
6:1 1.67 11⁄2 .375 1.066 16 125 3 1,510 2,873 .0376 10 3) Maximum allowable horsepower ratings are based on a 25% duty 11) For greater capacity, specify a 17-4PH hardened worm.
5SS-MSJ
cycle at standard ambient temperature, with 1 minute on 2 minute 12) Tare drag torque need only be added if operating under 25%
24:1 1.67 11⁄2 .375 1.066 64 48 3
⁄4 985 1,875 .0144 10
off cycles. For operation at higher duty cycles or repeated use over rated load.
8:1 3.33 2 .500 1.410 16 251 5 1,255 4,775 .0377 20 any segment of the total travel, temperature must be monitored and
10SS-MSJ Torque to Number
remain less than 200°F. raise one x of pounds x rpm
24:1 3.33 2 .500 1.410 48 128 1 ⁄2
1
739 2,813 .0192 20 Horsepower
pound to be raised
4) Overload capacity of the Stainless Steel Machine Screw Jack is as per jack =
8:1 5.00 2 ⁄4
1
.500 1.684 16 407 5 774 4,424 .0407 20
15SS-MSJ follows: 10% for dynamic loads, 30% for static loads. 63,025
24:1 5.00 2 ⁄4
1
.500 1.684 48 218 1 ⁄2
1
434 2,478 .0218 20
5) Stainless Steel Machine Screw Jacks having gear ratios between 13) Starting Torque is 100% greater than torque shown.
Nook stainless steel jacks are used widely in the commercial food industry. Nook stainless steel jacks used in a dairy processing application.
Column strength is the ability of the lift shaft to hold compressive To use this chart: 2SS-MSJ- U 6:1 / SSE-1 / 000-2 / FT / 24.5 / BS
loads without buckling. With longer screw lengths, column strength
Find a point at which the maximum length “L” intersects the
may be substantially lower than nominal jack capacity.
maximum load. Be sure the jack selected is above and to the right SS MACHINE SCREW MODEL HOUSING CONFIGURATION
If the lift shaft is in tension only, the screw jack travel is limited by the of that point. F = Standard Flange Base
Model #
available screw material or by the critical speed of the screw. Refer 2SS-MSJ
CAUTION: Chart does not include a design factor.
to the acme screw technical section for critical speed limitations. If 5SS-MSJ
there is any possibility for the lift shaft to go into compression, the The chart assumes proper jack alignment with no bending loads on 10SS-MSJ SCREW CONFIGURATION
15SS-MSJ
application should be sized for sufficient column strength. the screw. Effects from side loading are not included in this chart. 20SS-MSJ TRANSLATING - U and I MODELS
25SS-MSJ T = Standard Threaded End
Jacks operating horizontally with long lift shafts can experience C = Clevis End
The chart below is used to determine the required jack size in 35SS-MSJ
bending from the weight of the screw. P = Top Plate
applications where the lift shaft is loaded in compression.
CONFIGURATION ROTATING - UR and IR MODELS
U = Upright A = Travel Nut Position "A"
I = Inverted B = Travel Nut Position "B"
UR = Upright Rotating
100,000 MOUNTING CONDITIONS IR = Inverted Rotating UR - Upright Rotating IR - Inverted Rotating
A
Travel Nuts
10,000
20SS–MSJ
15SS–MSJ
B SHAFT ORDER CODE TRAVEL
For Translating Screw Models (U and I) use actual Travel in inches.
BOTH ENDS L For Rotating Screw Models (UR and IR) use "L" Dimension in inches
10SS–MSJ SUPPORTED
BY CLEVIS
ENDS SSE - 1
Load (lbs.)
3,000 5SS–MSJ
MODIFIER LIST
2,000 C CCW Position 1 B and/or H Optional
B = Bellows Boots (See page 204-205. Must calculate extend and
CW Position 2
2SS–MSJ ONE END FIXED, retract length.)
1,000 ONE END H = Hardened Worm
SUPPORTED L
(CLEVIS S or M Required
ATTACHED TO CCW Shaft CW Shaft
500 S = Standard. no additional description required
GUIDE STRUCTURE)
M = Modified, additional description required
300 ONE END FIXED,
ONE END
200 SUPPORTED L
ORDER CODES (Must Include A Position)
(RADIAL BEARING)) NOTE: Both Shaft Extensions Must Be Specified.
100 No Accessory
A 1 2 3 4 5 10 15 25 35 50 100 D SSE-_ = Standard Shaft Extension, Position 1 or 2
000-_ = Delete Shaft Extension, Position 1 or 2
B 2 4 6 8 10 20 30 50 70 100 200 BOTH ENDS FIXED SPC-_ = Special Modified Shaft Extension, Position 1 or 2
L
(TOP PLATE
C 3 6 9 12 15 30 45 75 105 150 ATTACHED TO
D 4 8 12 16 20 40 60 100 140 200 GUIDED
STRUCTURE)
“L” (inches)
Inch Stainless Steel Machine Screw Jack
2SS-MSJ TOP VIEW 2SS-MSJ-U UPRIGHT 2SS-MSJ-I INVERTED 2SS-MSJ-UR UPRIGHT ROTATING 2SS-MSJ-IR INVERTED ROTATING
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 6 15 L(min) = travel + 3
16
5 .625
7 Ø Acme nut position A,
Clockwise -18 UNF-2A .624 3
1 3 rotation 8 8 Equal to Specify position B
3 TYP. 1 raises load 4
2 16 travel for opposite
TYP. .500 15
Ø TYP. 1 3
1 .498 Ø3 16
1 1 2
4 54
1.705 Closed 15
1 1 3
1.703 × ×1 15 16 L
8 16 3 1 13
Keyway TYP. 16 216
2 1.755 L
1 TYP. 3 15 Acme nut
1 TYP. 1.745 3 position A,
4 16
21 Specify
1 13 Equal to travel Ø1 2 Closed 3
R 1 Ø 4 Holes position B
2 32 4
Capacity* Turns of Worm for Max Input Torque Max Allowable Tare Drag Torque to Max Worm Speed Max Load at
MODEL Gear Ratio (tons) 1” Travel (in-lb) Input (hp) Torque (in-lb) Raise 1 lb (in-lb) at Rated Load (rpm) 1,750 rpm (lb)
2SS-MSJ
6:1 0.66 24 33 2 4 .0250 1,800 1,320
24:1 0.66 96 14 1
⁄2 4 .0150 1,800 1,320
Grease: 0.5
Motor Mounts Limit Switch
see pg 180-181 see pg 196-201
ONLINE
5SS-MSJ TOP VIEW 5SS-MSJ-U UPRIGHT 5SS-MSJ-I INVERTED 5SS-MSJ-UR UPRIGHT ROTATING 5SS-MSJ-IR INVERTED ROTATING
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 8 5 L(min) = travel + 4
8
1 23 1.000
1 Clockwise Ø
4 2 TYP. 32 0.999
rotation
TYP. raises load 1
3 1-12 UNF-2A
1 5
4 + Travel Acme nut position A,
.749 8 5
1 Ø TYP. 7 Specify position B 4
1 .747 7 Closed Ø4 8
2 8 for opposite
8
2.189
2.187 3 3 1 45 1 5
× ×1 8 4 4
1 16 32 4 8 8
1
6 Keyway TYP.
2 1 2 2.255 L
3 2 2.245 L
4 Acme nut
5 position A,
5 4
11 3 15 8 Specify
3 1 Ø + Travel Ø2 2 Closed
4 Holes 8 8 16 position B
R 2 16 1
4 3 4 for opposite
Capacity* Turns of Worm for Max Input Torque Max Allowable Tare Drag Torque to Max Worm Speed Max Load at
MODEL Gear Ratio (tons) 1” Travel (in-lb) Input (hp) Torque (in-lb) Raise 1 lb (in-lb) at Rated Load (rpm) 1,750 rpm (lb)
5SS-MSJ
6:1 1.67 16 125 3 10 .0376 1,510 2,873
24:1 1.67 64 48 3
⁄4 10 .0144 985 1,875
ONLINE
10SS-MSJ TOP VIEW 10SS-MSJ-U UPRIGHT 10SS-MSJ-I INVERTED 10SS-MSJ-UR UPRIGHT ROTATING 10SS-MSJ-IR INVERTED ROTATING
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 8 5 L(min) = travel + 4
8
1.250
Ø
1.249 Acme nut position A,
1
5 TYP.
* ForClockwise
13
2 32
greater capacity, specify a 17- 2
Specify position B
for opposite
2
4PH rotation
TYP. hardened worm.
raises load 1 1
1 4 -12 UNF-2A
5
48
1
2 5 + Travel
1.000 8
Ø TYP. 3
11 0.998 6 7 Closed Ø5 8
1 8
7 16
2.600 1
5 42 5
2.598 48 48 L
3 1 1 1
84 Keyway TYP. 1 L
4 × 8 × 12
7 2
2 2 Acme nut
8 position A,
5
13 48
Ø 4 Holes 5 + Travel 2.245 Specify
7R 3 7 16 7 11
34 28 8 Ø2 8 2.255 2 Closed position B
8 16 2
TYP. TYP. for opposite
ONLINE
15SS-MSJ TOP VIEW 15SS-MSJ-U UPRIGHT 15SS-MSJ-I INVERTED 15SS-MSJ-UR UPRIGHT ROTATING 15SS-MSJ-IR INVERTED ROTATING
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 9 7 L(min) = travel + 4 1
8 2
1.500
Ø
1.499
Acme nut position A,
2 Specify position B
1 13 Clockwise for opposite
5 TYP. 2 TYP.
2 32 rotation
raises load 1 3
3 1 -12 UNF-2A 5
1 1 2 5 + Travel 8
1.000 84 4 8
Ø TYP.
11 0.998 Closed
1 116
7
2 5
2.600 Ø5 1
3 8 3
2.598 1 1 1 5 5 58
1 8 4 L
9
4 4 × 8 × 12
5 L
Keyway TYP. 2.755
1 8
3 22 2.745
3 Acme nut
8
5 3 position A,
+ Travel 58
8 7 15 Specify
15 Ø2 2 16 Closed
7 7 Ø 16 4 Holes 8 2 position B
R 3 8 TYP. 3 TYP.
8 for opposite
ONLINE
20SS-MSJ TOP VIEW 20SS-MSJ-U UPRIGHT 20SS-MSJ-I INVERTED 20SS-MSJ-UR UPRIGHT ROTATING 20SS-MSJ-IR INVERTED ROTATING
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 10 15 L(min) = travel + 4 1
16 2
1.750
Ø
1.749
Acme nut position A,
1 Specify position B
2
3 2 for opposite
2 1 - UN-2A 5
1 15 4 + Travel
5 2 TYP. 1 16 1 8 7
Clockwise 9 4 Closed 6
TYP. rotation 16
raises load 1
Ø6
8
1.000
Ø TYP.
2 0.998
7
83 7 5
7
6 16
4 6 16 3 8 L
2.600
4 3.255 L
2.598
1 1 1 3.245
11 4 × 8 × 12 7 Acme nut
1 3 Keyway TYP. 616
48 position A,
5 1 3
8 + Travel Ø3
2 316 Closed 1
Specify
1 22 position B
1 1 Ø1 8 4 Holes for opposite
1 R 4 8 TYP. 3 TYP.
Capacity* Turns of Worm for Max Input Torque Max Allowable Tare Drag Torque to Max Worm Speed Max Load at
MODEL Gear Ratio (tons) 1” Travel (in-lb) Input (hp) Torque (in-lb) Raise 1 lb (in-lb) at Rated Load (rpm) 1,750 rpm (lb)
20SS-MSJ
8:1 6.66 16 580 5 40 .0435 540 4,140
ONLINE
25SS-MSJ TOP VIEW 25SS-MSJ-U UPRIGHT 25SS-MSJ-I INVERTED 25SS-MSJ-UR UPRIGHT ROTATING 25SS-MSJ-IR INVERTED ROTATING
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 13 21 L(min) = travel + 5 1
32 32
2.250
Ø
2.249
ONLINE
35SS-MSJ TOP VIEW 35SS-MSJ-U UPRIGHT 35SS-MSJ-I INVERTED 35SS-MSJ-UR UPRIGHT ROTATING 35SS-MSJ-IR INVERTED ROTATING
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 15 1 L(min) = travel + 6 1
16 2
3.000
Ø 2.999
7 Acme nut position A,
TYP. 23 1
32
4 Clockwise Specify position B
TYP. for opposite
rotation
raises load 21 3-12 UN-2A 89
4 Equal to 16
3
1.375 1116 Closed travel
21 Ø 1.373 TYP.
2
12 1
2 Ø8 1
3.752 9 8
3.750 8 2 9
15 1 5×5
×2
16 8
16
L
2 16 32 1
Keyway 14 L
4.005 Acme nut
41 TYP. 3.995
6 2 position A,
Specify
Equal 1
Ø4 2 89
to travel 7 16 position B
5 5 3 Closed 1 for opposite
1 R 1 3 Ø1 16 32
8 5 34 8
8
Capacity* Turns of Worm for Max Input Torque Max Allowable Tare Drag Torque to Max Worm Speed Max Load at
MODEL Gear Ratio (tons) 1” Travel (in-lb) Input (hp) Torque (in-lb) Raise 1 lb (in-lb) at Rated Load (rpm) 1,750 rpm (lb)
35SS-MSJ
102⁄3:1 11.66 16 1,150 11 50 .0493 603 8,035
ONLINE
METERS OF TRAVEL
OPERATING LOAD UPRIGHT & UPRIGHT &
Raise for Max Worm
MODEL (kN) INVERTED INVERTED ROTATING
Lifting Screw Root One Turn Max Input Max Speed at Max Load at Torque to No Load Back Drive
Gear Capacity Screw Dia Lead Dia of Worm Torque Input Rated Load 1,425 rpm Raise 1 Torque Holding EM05-BSJ 4 34,295 42,869
MODEL Ratio (kN) (mm) (mm) (mm) (mm) (N·m) (kW) (rpm) (kN) kN (N·m) (N·m) Torque
2 274,360 342,950
EM05-BSJ 5:1 5 16 5 12.9 1.00 1.21 0.21 1,625 5.0 0.24 0.11 1.0 1 2,194,880 2,743,600
20:1 5 16 5 12.9 0.25 0.51 0.09 1,625 5.0 0.10 0.11 0.5 EM1-BSJ 8 21,455 26,819
5 87,880 109,850
EM1-BSJ 5:1 10 20 5 17.5 1.00 2.41 0.38 1,500 10.0 0.24 0.34 2.0
2.5 703,040 878,800
20:1 10 20 5 17.5 0.25 1.14 0.19 1,585 10.0 0.11 0.34 1.0
EM2.5-BSJ 22 2,793 3,716
EM2.5-BSJ 6:1 25 25 5 22.5 0.83 5.05 1.08 2,035 25.0 0.20 0.56 4.5 12 18,321 22,901
12:1 25 25 5 22.5 0.42 3.05 0.65 2,035 25.0 0.12 0.56 2.5 6 146,565 183,206
EM5-BSJ 44 28,660 35,825
24:1 25 25 5 22.5 0.21 2.13 0.38 1,695 25.0 0.09 0.56 2.0
22 229,283 286,604
EM5-BSJ 6:1 50 40 10 34.8 1.67 19.3 2.28 1,125 39.4 0.39 1.13 16.0
10 2,441,406 3,051,758
24:1 50 40 10 34.8 0.42 7.7 0.56 695 24.4 0.15 1.13 6.5 EM10-BSJ 88 6,315 7,894
EM10-BSJ 8:1 100 50 10 45.2 1.25 31.9 3.75 1,125 78.9 0.32 2.26 26.0 44 50,522 63,153
22 404,178 505,223
24:1 100 50 10 45.2 0.42 16.2 1.12 665 46.6 0.16 2.26 13.5
EM20-BSJ 170 6,702 8,378
NOTES: 6) All units are suitable for intermittent operation providing that the
housing temperature including ambient is not lower than -30°C. or
1) The recommended maximum speed is 3,000 rpm providing
higher than +95°C. Factory supplied grease in standard units will
that the recommended horsepower and temperature are not
operate in this range. For higher or lower operating temperature
exceeded.
ranges consult Nook Industries.
2) Input torque is shown as torque to lift one kN of load. Starting
7) Accessories such as boots, limit switches, top plates and
torque is 50% greater than torque shown. For loads less than
clevises are available.
25% of rated loads add tare drag torque.
8) Catalog dimensions are representative only and are subject to
3) Maximum allowable horsepower ratings are based on a 35%
change without notice. For construction, use only certified prints.
duty cycle at standard ambient temperature, with 1 minute on 2
minute off cycles. For operation at higher duty cycles or repeated 9) Units are not to be used as personnel support or movement.
use over any segment of the total travel, temperature must be
10) End-of-travel stops are not provided.
monitored and remain less than 95°C.
11)ΔStarting torque is100% greater than torque shown.
4) Overload capacity of the Metric Ball Screw Jack is as follows:
0% for dynamic loads, 20% for static loads.
Torque to Number Tare
5) All Ball Screw Jacks can backdrive and require some means kW raise one x of kN + Drag x RPM
kN(N •m) to be raised Torque
of holding the load, such as a brake on the motor. The product per jack =
Column strength is the ability of the lift shaft to hold compressive To use this chart: Find a point at which the maximum length “L”
EM2.5-BSJ- U 6:1 / SSE-1 / 80B5-2 / FT / 580mm / BS
loads without buckling. With longer screw lengths, column strength intersects the maximum load. Be sure the jack selected is above and
may be substantially lower than nominal jack capacity. to the right of that point. BALL SCREW MODEL HOUSING CONFIGURATION
F = Standard Flange Base
Model # Model #
If the lift shaft is in tension only, the screw jack travel is limited by CAUTION: Chart does not include a design factor.
EM05-BSJ EM5-BSJ
the available screw material or by the critical speed of the screw. EM1-BSJ EM10-BSJ
The chart assumes proper jack alignment with no bending loads on EM2.5-BSJ EM20-BSJ
Refer to the ball screw technical section for critical speed limitations.
the screw. Effects from side loading are not included in this chart.
SCREW CONFIGURATION
If there is any possibility for the lift shaft to go into compression, the
Jacks operating horizontally with long lift shafts can experience TRANSLATING - U and I MODELS
application should be sized for sufficient column strength. CONFIGURATION T = Standard Threaded End
bending from the weight of the screw. C = Clevis End
The chart below is used to determine the required jack size in U = Upright P = Top Plate
I = Inverted
applications where the lift shaft is loaded in compression.
UR = Upright Rotating ROTATING - UR and IR MODELS
IR = Inverted Rotating A = Travel Nut Position "A"
B = Travel Nut Position "B"
700
MOUNTING CONDITIONS Travel Nuts
SHAFT ORDER CODE L shown in
A position "A" L
500
L
300
SSE - 1
ONE END FIXED
EM20 ONE END FREE TRAVEL
100
EM10 B CCW Position 1
CW Position 2
Travel in mm.
For Rotating Screw Models (UR and IR) use "L"
Dimension in mm.
70 BOTH ENDS
SUPPORTED
L ORDER CODES (Must Include A Position)
EM5
NOTE: Both Shaft Extensions Must Be Specified.
50 BY CLEVIS MODIFIER LIST
ENDS
E and/or B optional
30
Load (kN)
“L” (mm)
Metric Ball Screw Jack
ONLINE
EM05-BSJ TOP VIEW EM05-BSJ-U UPRIGHT EM05-BSJ-I INVERTED EM05-BSJ-UR UPRIGHT ROTATING EM05-BSJ-IR INVERTED ROTATING
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 125 L(min) = travel + 75
22 + Travel
20 M10x1.5-6g Ø10k6 Ø55
Capacity Raise for One Turn Max Input Torque Max Allowable No Load Backdrive Holding Torque to Max Worm Speed Max Load at
MODEL Gear Ratio (kN) of Worm (mm) (N-m) Input (kW) Torque (N-m) Torque (N-m) Raise 1 kN (N-m) at Rated Load (rpm) 1,425 rpm (kN)
EM05-BSJ
5:1 5 1.00 1.21 0.21 0.11 1.0 .24 1,625 5.0
Caution: Jack is self-lowering. Lifting screw must be secured to prevent rotation for non-keyed units.
ONLINE
EM1-BSJ TOP VIEW EM1-BSJ-U UPRIGHT EM1-BSJ-I INVERTED EM1-BSJ-UR UPRIGHT ROTATING EM1-BSJ-IR INVERTED ROTATING
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 164 L(min) = travel + 90
25 M12x1.5-6g
25.5 + Travel
Ø12k6
Ø70
76 TYP. Ball Nut
25
36 TYP. 191 Position A,
2.5 TYP. 25 Closed Specify
TYP. Clockwise Ø70 83
rotation Position B
raises load for opposite
153.5 153.5
Ø14h7
Ø35
95 L
10
31.75 Ø70
115 5×5×25N9 70
L
38 10
45 35 83 Ball Nut
Ø35 Position A,
M6x1.0-6H 48 Specify
25.5 + Travel Closed
Ø8.8 Ø33.5 4 Holes Eq. SP on Position B
30 Ø44.44 bolt circle 25
40 for opposite
TYP. TYP. 4 Holes
Capacity Raise for One Turn Max Input Torque Max Allowable No Load Backdrive Holding Torque to Max Worm Speed Max Load at
MODEL Gear Ratio (kN) of Worm (mm) (N-m) Input (kW) Torque (N-m) Torque (N-m) Raise 1 kN (N-m) at Rated Load (rpm) 1,425 rpm (kN)
EM1-BSJ
5:1 10 1.00 2.41 0.38 0.34 2.0 .24 1,500 10.0
Caution: Jack is self-lowering. Lifting screw must be secured to prevent rotation for non-keyed units.
ONLINE
EM2.5-BSJ TOP VIEW EM2.5-BSJ-U UPRIGHT EM2.5-BSJ-I INVERTED EM2.5-BSJ-UR UPRIGHT ROTATING EM2.5-BSJ-IR INVERTED ROTATING
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 186 L(min) = travel + 107
Capacity Raise for One Turn Max Input Torque Max Allowable No Load Backdrive Holding Torque to Max Worm Speed Max Load at
MODEL Gear Ratio (kN) of Worm (mm) (N-m) Input (kW) Torque (N-m) Torque (N-m) Raise 1 kN (N-m) at Rated Load (rpm) 1,425 rpm (kN)
EM2.5-BSJ
6:1 25 0.83 5.05 1.08 0.56 4.5 0.20 2,035 25.0
Caution: Jack is self-lowering. Lifting screw must be secured to prevent rotation for non-keyed units.
ONLINE
EM5-BSJ TOP VIEW EM5-BSJ-U UPRIGHT EM5-BSJ-I INVERTED EM5-BSJ-UR UPRIGHT ROTATING EM5-BSJ-IR INVERTED ROTATING
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 260 L(min) = travel + 157
40 M25x1.5-6g Ø114
Ø25k6
45 + Travel
40
Ball Nut 121
115 TYP. 36 290 Ø108
3 TYP. 30 TYP. Closed Position A,
TYP. Clockwise
Specify
rotation
raises load Position B 17.5 Ø65
236 236 for opposite
36.5 Ø20h7
167
L Ball Nut
55.56 L
203 Position A,
6×6×30N9 100 Ø114
Specify
13 Position B
76 58 57 121 for opposite
17.5 40
45 + Travel
Ø18 - 4 Holes 70 Ø65
76 57 Ø60 Closed
4 x R19 TYP. TYP. Ø32 C'bore
Capacity Raise for One Turn Max Input Torque Max Allowable No Load Backdrive Holding Torque to Max Worm Speed Max Load at
MODEL Gear Ratio (kN) of Worm (mm) (N-m) Input (kW) Torque (N-m) Torque (N-m) Raise 1 kN (N-m) at Rated Load (rpm) 1,425 rpm (kN)
EM5-BSJ
Caution: Jack is self-lowering. Lifting screw must be secured to prevent rotation for non-keyed units.
ONLINE
EM10-BSJ TOP VIEW EM10-BSJ-U UPRIGHT EM10-BSJ-I INVERTED EM10-BSJ-UR UPRIGHT ROTATING EM10-BSJ-IR INVERTED ROTATING
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 283 L(min) = travel + 173
50 M30x2-6g Ø30k6
Ø137
40.5 + Travel 50
140 TYP.
4 TYP. 36 TYP. 48 Ball Nut
TYP. 295 125
Clockwise Closed Position A,
rotation Ø108 Specify
raises load
Position B
233 233
Ø25h7 for opposite 17 Ø76.5
40
180 L
222
66 107 Ball Nut
8×7×36N9 Ø137 L Position A,
57.5 Specify
52 125 Position B
73
17 for opposite
40.5 + Travel 13 80 Ø76.5
Ø22 - 4 Holes Ø73 Closed 50
4 x R22 95.5 73
TYP. TYP. Ø40 C'bore
Capacity Raise for One Turn Max Input Torque Max Allowable No Load Backdrive Holding Torque to Max Worm Speed Max Load at
MODEL Gear Ratio (kN) of Worm (mm) (N-m) Input (kW) Torque (N-m) Torque (N-m) Raise 1 kN (N-m) at Rated Load (rpm) 1,425 rpm (kN)
EM10-BSJ
6:1 100 1.25 31.9 3.75 2.26 26.0 0.32 1,125 78.9
Caution: Jack is self-lowering. Lifting screw must be secured to prevent rotation for non-keyed units.
ONLINE
EM20-BSJ TOP VIEW EM20-BSJ-U UPRIGHT EM20-BSJ-I INVERTED EM20-BSJ-UR UPRIGHT ROTATING EM20-BSJ-IR INVERTED ROTATING
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 370 L(min) = travel + 215
60 M45x2-6g 45 + Travel
Ø45k6 Ø159
148 TYP. 47
4 TYP. 40 TYP. TYP. 60
Ø159 172
Clockwise Ball Nut
448 376 Position A,
rotation
raises load Closed 375.5 Specify
Ø25h7 Position B
51 for opposite Ø90
225
17.5
279
73
8×7×40N9 L Ball Nut
143 Ø159 L Position A,
105 76 Specify
82.55 17.5
Position B
172
for opposite
Ø26 - 4 Holes 90 Ø90
105 76 Ø46 C'bore 45 + Travel
4 x R29 TYP. TYP. Ø89 19 Closed 60
Capacity Raise for One Turn Max Input Torque Max Allowable No Load Backdrive Holding Torque to Max Worm Speed Max Load at
MODEL Gear Ratio (kN) of Worm (mm) (N-m) Input (kW) Torque (N-m) Torque (N-m) Raise 1 kN (N-m) at Rated Load (rpm) 1,425 rpm (kN)
EM20-BSJ
8:1 200 1.5 75.2 5.6 4.52 61.0 0.38 710 99.8
Caution: Jack is self-lowering. Lifting screw must be secured to prevent rotation for non-keyed units.
ONLINE
100 EM10
B SSE - 1 TRAVEL
BOTH ENDS L For Translating Screw Models (U and I) use actual Travel in mm.
70 CCW Position 1
SUPPORTED For Rotating Screw Models (UR and IR) use "L" Dimension in mm.
BY CLEVIS CW Position 2
50 EM5 ENDS
Load (kN)
MODIFIER LIST
20
EM2.5 C CCW Shaft CW Shaft
E and/or B Optional
E = In-Line Encoder (Motor or motor mount is required.)
B = Bellows Boots (Must calculate retracted and extended
ONE END FIXED, boot length. See page 204-205)
ONE END P = Nook Tube Sensor System PNP
10 EM1
SUPPORTED L ORDER CODES (Must Include A Position) N = Nook Tube Sensor System NPN
(CLEVIS NOTE: Both Shaft Extensions Must Be Specified.
7 ATTACHED TO
No Accessory S or M Required
GUIDE STRUCTURE)
SSE-_ = Standard Shaft Extension, Position 1 or 2 S = Standard. no additional description required
5 EM05 M = Modified, additional description required
ONE END FIXED, 000-_ = Delete Shaft Extension, Position 1 or 2
ONE END SPC-_ = Special Modified Shaft Extension, Position 1 or 2
3 SUPPORTED L
(RADIAL BEARING)) Motor Mounts Without Motor
2 (Position 1 or 2)
1
D 56B5
56B14
= EM05
= EM05
EM05-MSJ TOP VIEW EM05-MSJ-U UPRIGHT EM05-MSJ-I INVERTED EM05-MSJ-UR UPRIGHT ROTATING EM05-MSJ-IR INVERTED ROTATING
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 111 L(min) = travel + 61
Capacity Raise for One Turn Max Input Torque Max Allowable No Load Torque to Max worm speed Max Load at
MODEL Gear Ratio (kN) of Worm (mm) (N-m) Input (kW) Torque (N-m) Raise 1 kN (N-m) at Rated Load (rpm) 1,425 rpm (kN)
EM05-MSJ
5:1 5 0.80 2.25 0.27 0.11 0.45 1,130 4.0
ONLINE
EM1-MSJ TOP VIEW EM1-MSJ-U UPRIGHT EM1-MSJ-I INVERTED EM1-MSJ-UR UPRIGHT ROTATING EM1-MSJ-IR INVERTED ROTATING
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 140 L(min) = travel + 90
76 TYP.
Ø12k6 Ø70
2.5 TYP. 25 36 TYP.
25 M12x1.5-6g
TYP. Clockwise 25
rotation 83.5
raises load
10 + Travel
Ø14h7 Ø70
121 Travel nut position A,
Closed Specify position B
95 83.5 83.5 for opposite
Ø35
31.75 70
Ø70
115 5×5×25N9 L 10
38
10 L
83.5
45 35 Travel Nut
10 + Travel M6x1.0-6H
Ø33.5 4 Holes Eq. SP on Ø35 Position A,
Ø44.44 bolt circle 47.5 Specify
Ø8.8 Closed 25 Position B
40 30
TYP. TYP. 4 Holes For Opposite
Capacity Raise for One Turn Max Input Torque Max Allowable No Load Torque to Max worm speed Max Load at
MODEL Gear Ratio (kN) of Worm (mm) (N-m) Input (kW) Torque (N-m) Raise 1 kN (N-m) at Rated Load (rpm) 1,425 rpm (kN)
EM1-MSJ
5:1 10 0.80 5.19 0.36 0.34 0.52 665 4.7
ONLINE
EM2.5-MSJ TOP VIEW EM2.5-MSJ-U UPRIGHT EM2.5-MSJ-I INVERTED EM2.5-MSJ-UR UPRIGHT ROTATING EM2.5-MSJ-IR INVERTED ROTATING
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 168 L(min) = travel + 92
90 Ø95
TYP. Ø16k6
2.5 TYP. 25 TYP. 29 Clockwise
TYP. rotation 20 + Travel 30
raises load Travel nut 97
M18x1.5-6g position A,
Ø16h7 30
29 Specify
133 position B
Ø95 97 for opposite
140 17.5 Ø50
44.5 Closed
159 Ø95
5×5×25N9 L L Travel nut
97
position A,
73 17.5 Specify
60 47.5 97
44.5 Ø50 position B
60 for opposite
Closed
Ø11 - 4 Holes 20 + Travel
Ø22 C'bore 13 30
4 x R13 52.5 40 Ø48.5
TYP. TYP.
Capacity Raise for One Turn Max Input Torque Max Allowable No Load Torque to Max worm speed Max Load at
MODEL Gear Ratio (kN) of Worm (mm) (N-m) Input (kW) Torque (N-m) Raise 1 kN (N-m) at Rated Load (rpm) 1,425 rpm (kN)
EM2.5-MSJ
6:1 25 1.0 14.9 1.51 0.56 0.59 975 17.0
ONLINE
EM5-MSJ TOP VIEW EM5-MSJ-U UPRIGHT EM5-MSJ-I INVERTED EM5-MSJ-UR UPRIGHT ROTATING EM5-MSJ-IR INVERTED ROTATING
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 207 L(min) = travel + 103
Capacity Raise for One Turn Max Input Torque Max Allowable No Load Torque to Max worm speed Max Load at
MODEL Gear Ratio (kN) of Worm (mm) (N-m) Input (kW) Torque (N-m) Raise 1 kN (N-m) at Rated Load (rpm) 1,425 rpm (kN)
EM5-MSJ
6:1 50 1.17 40.3 1.87 1.13 0.81 445 15.6
ONLINE
EM10-MSJ TOP VIEW EM10-MSJ-U UPRIGHT EM10-MSJ-I INVERTED EM10-MSJ-UR UPRIGHT ROTATING EM10-MSJ-IR INVERTED ROTATING
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 227 L(min) = travel + 120
Ø137
140 TYP. Ø30k6
4 TYP. 36 TYP. 48
TYP. 50 125
Clockwise
rotation
raises load M30x2-6g 15.5 + Travel
50 Travel nut
Ø25h7 position A,
40 Specify
position B 17 Ø76.5
180 Ø137 125
190 L for opposite
222
66 Closed
8×7×36N9 Ø137 L
125
107
Travel nut
52 57.5 17 Ø76.5 125 position A,
73
Specify
80 Closed position B
15.5 + Travel Ø73 50 for opposite
Ø22 - 4 Holes 13
4 x R22 95.5 73 TYP. Ø40 C'bore
TYP.
Capacity Raise for One Turn Max Input Torque Max Allowable No Load Torque to Max worm speed Max Load at
MODEL Gear Ratio (kN) of Worm (mm) (N-m) Input (kW) Torque (N-m) Raise 1 kN (N-m) at Rated Load (rpm) 1,425 rpm (kN)
EM10-MSJ
8:1 100 1.50 97.2 3.65 2.26 0.97 360 25.2
ONLINE
EM20-MSJ TOP VIEW EM20-MSJ-U UPRIGHT EM20-MSJ-I INVERTED EM20-MSJ-UR UPRIGHT ROTATING EM20-MSJ-IR INVERTED ROTATING
For ordering, specify “L” dimension For ordering, specify “L” dimension
L(min) = travel + 285 L(min) = travel + 135
Capacity Raise for One Turn Max Input Torque Max Allowable No Load Torque to Max worm speed Max Load at
MODEL Gear Ratio (kN) of Worm (mm) (N-m) Input (kW) Torque (N-m) Raise 1 kN (N-m) at Rated Load (rpm) 1,425 rpm (kN)
EM20-MSJ
8:1 200 1.50 215 5.60 4.52 1.08 250 35.0
ONLINE
CUBIC JACKS.....................................154-161
ActionJac™ Cubic Ball Screw and Machine Screw Jacks
......................................... Quick Reference
meet international Cubic Jack versatile mounting standards.
156-157
Mounting versatility is further increased with the provision
.........................................Column Strength
for trunnion mounting integral to the Cubic Jack housing.
158-159
Housings are made from high quality corrosion-resistant
...........................................Life Expectancy
aluminum. Cubic Jacks are capable of directly mounting a
160
wide array of motors and gear reducers. Available in true
........................ Reference Number System
metric and inch standards.
161
CUBIC JACKS
Nook worm gear screw jacks are used widely in the solar industry.
Max Worm Lifting Raise for Max Max Worm Max Torque Back
Lifting Turns of Max input Max Speed at Max Load Torque to Tare Drag Back Drive Screw Screw One Turn Input Max Speed at Load at to Raise No Load Drive
Gear Capacity Screw Screw Root Dia Worm for Torque Input Rated Load at 1,750 Raise 1 lb. Torque Holding Gear Capacity Dia lead Root Dia of Worm Torque Input Rated Load 1,425 1 kN Torque Holding
MODEL Ratio (tons) Dia (in) Lead (in) (in) 1” travel (in.-lb.) (hp) (rpm) rpm (lb) (in-lb) (in-lb) Torque MODEL Ratio (kN) (mm) (mm) (mm) (mm) (N·m) (kW) (rpm) rpm (kN) (N·m) (N·m) Torque
0.5C-BSJ 5:1 1
⁄2 5
⁄8 .200 .500 25 9.5 1
⁄3 1,800 1,000 .0095 1 1.0 EM05C- 5:1 5 15.7 5 12.9 1.00 1.21 0.21 1,625 5.0 0.24 0.11 1.0
BSJ
20:1 1
⁄2 5
⁄8 .200 .500 100 4.0 1
⁄6 1,800 1,000 .0040 1 .25 20:1 5 15.7 5 12.9 0.25 0.51 0.09 1,625 5.0 0.10 0.11 0.5
0.5CHL-BSJ EM1C- 5:1 10 20 5 17.5 1.00 2.41 0.38 1,500 10.0 0.24 0.34 2.0
5:1 1
⁄2 5
⁄8 .500 .500 10 24.2 1
⁄3 868 496 .0242 1 2 BSJ
20:1 10 20 5 17.5 0.25 1.14 0.19 1,585 10.0 0.11 0.34 1.0
20:1 1
⁄2 5
⁄8 .500 .500 40 10.2 1
⁄6 1,030 588 .0102 1 1
EM05C- 5:1 5 16 4 10.9 0.80 2.25 0.27 1,130 4.0 0.45 0.11 —
1C-BSJ 5:1 1 3
⁄4 .200 .602 25 19 1
⁄2 1,660 1,895 .0095 3 1.5 MSJ
20:1 5 16 4 10.9 0.20 0.94 0.13 1,130 4.6 0.19 0.11 —
20:1 1 3
⁄4 .200 .602 100 9 1
⁄4 1,750 2,000 .0045 3 .50 EM1C- 5:1 10 20.0 5 17.5 0.80 5.19 0.36 665 4.7 0.52 0.34 —
MSJ
1CHL-BSJ 20:1 10 20.0 5 17.5 0.20 2.44 0.19 730 5.1 0.24 0.34 —
5:1 1 3
⁄4 .500 .602 10 48.2 1
⁄2 654 747 .0241 3 3.5
20:1 1 3
⁄4 .500 .602 40 9 1
⁄4 691 790 .0114 3 1.5
MJC-20 5:1 .5 1
⁄2 .250 .332 20 19 1
⁄3 1,090 631 .019 — —
MJC-25 5:1 .5 5
⁄8 .200 .377 25 21 1
⁄3 1,040 571 .021 — —
NOTES:
MJC-40 5:1 .5 5
⁄8 .125 .457 40 17 1
⁄3 1,260 706 .017 — —
1) The recommended maximum speed is 1,800 rpm providing the operate in this range. For higher or lower operating temperature
MJC-50 5:1 .5 1
⁄2 .100 .359 50 14 1
⁄3 1,560 857 .014 — —
recommended horsepower and temperature are not exceeded. ranges consult Nook Industries.
MJC-80 20:1 .5 1
⁄2 .250 .332 80 8 1
⁄6 1,310 750 .008 — —
2) Input torque is shown as torque to lift one kN of load. Starting 7) Accessories such as boots, limit switches, top plates and clevises
MJC-100 20:1 .5 5
⁄8 .200 .377 100 9 1
⁄6 1,210 667 .009 — — torque is 100% greater than torque shown for Machine Screw Jacks are available.
and 50% greater than the torque shown for Ball Screw Jacks. For
MJC-160 20:1 .5 5
⁄8 .125 .457 160 7 1
⁄6 1,500 857 .007 — — 8) Catalog dimensions are representative only and are subject to
loads less than 25% of rated loads, add tare drag torque.
change without notice. For construction, use only certified prints.
MJC-200 20:1 .5 1
⁄2 .100 .359 200 6 1
⁄6 1,800 1,000 .006 — — 3) Maximum allowable power ratings are based on a 25% duty
9) Units are not to be used as personnel support or movement.
1C-MSJ 5:1 1 3
⁄4 .200 .502 25 45 1
⁄2 700 800 .0225 3 — cycle. For operation at higher duty cycles or repeated use over any
segment of the total travel, temperature must be monitored and 10) End-of-travel stops are not provided.
20:1 1 3
⁄4 .200 .502 100 21 1
⁄4 750 857 .0105 3 —
remain less than 95°C.
Torque to Number Tare
NOTES: 6) All units are suitable for intermittent operation providing that the 4) Overload capacity of the Cubic Jack is as follows: 10% for dynamic
kW raise one x of kN + Drag x RPM
1) The recommended maximum speed is 1,800 rpm provided that housing temperature including ambient is not lower than -20°F or loads, 30% for static loads. per jack =
kN(N •m) to be raised Torque
the recommended horsepower and temperature are not exceeded. higher than +200°F. Factory supplied grease in standard units will
operate in this range. For higher or lower operating temperature 5) Cubic Machine Screw Jacks having gear ratios of 20:1 are self- 9,549
2) Input torque is shown as torque to lift one pound of load. Starting locking and will hold loads without backdriving in the absence of
ranges consult Nook Industries. 11) Starting torque is100% greater than torque shown.
torque is 100% greater than torque shown for Machine Screw Jacks vibrations. All other ratios may require a brake to prevent backdriving.
and 50% greater than torque shown for Ball Screw Jacks. Tare drag 7) Accessories such as boots, top plates and clevises are available. 12) No load torque need only be added if operating under 25% rated
6) All units are suitable for intermittent operation providing that the
CUBIC JACKS
torque should be added for all loads. 8) Catalog dimensions are representative only and are subject to load.
housing temperature including ambient is not lower than -30°C. or
3) Maximum allowable horsepower ratings are based on a 25% duty change without notice. For construction, use only certified prints. higher than +95°C. Factory supplied grease in standard units will
cycle at standard ambient temperature, with 1 minute on 2 minute 9) Units are not to be used as personnel support or movement.
off cycles. For operation at higher duty cycles or repeated use over
any segment of the total travel, temperature must be monitored and 10) End-of-travel stops are not provided.
remain less than 200°F. 11) Tare drag torque need only be added if operating under 25%
4) Overload capacity of the Cubic Jack is as follows: 10% for dynamic rated load.
loads, 30% for static loads. Torque to Number
Horsepower raise one x of pounds x rpm
5) Cubic Machine Screw Jacks having gear ratios of 20:1 are self- pound to be raised
per jack =
locking and will hold loads without backdriving in the absence of
vibration. All other ratios may require a brake to prevent backdriving. 63,025
Column strength is the ability of the lift shaft to hold compressive TO USE THESE CHARTS: 30 MOUNTING CONDITIONS
loads without buckling. With longer screw lengths, column strength
Find a point at which the maximum length “L” intersects the 20 BALL MACHINE
may be substantially lower than nominal jack capacity.
maximum load. Be sure the jack selected is above and to the right SCREW SCREW
JACKS JACKS
If the lift shaft is in tension only, the screw jack travel is limited by of that point. EM1
the available screw material or by the critical speed of the screw.
A
10
CAUTION: chart does not include a design factor.
Refer to the ball screw technical section for critical speed limitations.
Load (kN)
7
If there is any possibility for the lift shaft to go into compression, the The chart assumes proper jack alignment with no bending loads on EM05 ONE END FIXED
5 L L
application should be sized for sufficient column strength. the screw. Effects from side loading are not included in this chart. ONE END FREE
Jacks operating horizontally with long lift shafts can experience
The chart below is used to determine the required jack size in 3
bending from the weight of the screw.
applications where the lift shaft is loaded in compression.
2
C
ONE END FIXED,
1
ONE END
A 50 100 150 250 350 500 SUPPORTED
L L
C 150 300 450 750 1,050 1,500 (CLEVIS
D 200 2,000 ATTACHED TO
3,000 MOUNTING CONDITIONS 400 600 1,000 1,400
GUIDE STRUCTURE)
2,000 1.0–TON BALL MACHINE “L” (mm)
SCREW SCREW Metric Ball Screw Jack
Load (lbs.)
Load (kN)
100 7
A
C
1
3
2
6
3
9
4
12 15
5 10
30
15
45
25 35 50
75 105 150
C 5 EM05 BOTH ENDS FIXED
ONE END FIXED, (TOP PLATE L L
D 4 8 12 16 20 40 60 100 140 200 ATTACHED TO
ONE END 3
SUPPORTED GUIDED
L (in) L L STRUCTURE)
(CLEVIS 2
Inch Ball Screw Jack ATTACHED TO
GUIDE STRUCTURE)
1
A 50 100 150 250 350 500
3,000 ONE END FIXED,
C 150 300 450 750 1,050 1,500
ONE END
2,000 1.0–TON SUPPORTED L L D 200 400 600 1,000 1,400 2,000
(RADIAL BEARING)
“L” (mm)
Load (lbs.)
1,000
CUBIC JACKS
MINI CUBIC JACKS Metric Trapezoidal Screw Jacks
500
300 D
200 BOTH ENDS FIXED
(TOP PLATE L L
100 ATTACHED TO
A 1 2 3 4 5 10 15 25 35 50 GUIDED
STRUCTURE) AVAILABLE LIFT SCREW LENGTHS
C 3 6 9 12 15 30 45 75 105 150
D 4 8 12 16 20 40 60 100 140 200 As a major manufacturer of industrial lead screws, Nook Industries
stocks a wide selection of screws. Nook Industries has the capacity
L (in)
to make long screws for special applications. Rotating screw jacks
Inch Machine Screw Jack
can be built with a larger diameter lift screw for greater column
strength, or a different lead to change the jack operating speed.
ONLINE
2 274,360 342,950
CCW Shaft CW Shaft
1 2,194,880 2,743,600
CUBIC JACKS
EM1C-BSJ 8 21,455 26,819
NO ACCESSORY
5 87,880 109,850 SSE-_ = Standard Shaft Extension, Position 1 or 2
2.5 703,040 878,800 000-_ = Delete Shaft Extension, Position 1 or 2
SPC-_ = Special Modified Shaft Extension, Position 1 or 2
Motor Mounts
NEMA Frames 23, 34, and 48 are available.
Contact Nook Engineering for further informtaion.
0.5C-BSJ & 0.5CHL-BSJ TOP VIEW 0.5C-BSJ-U & 0.5CHL-BSJ-U 0.5C-BSJ-I & 0.5CHL-BSJ-I 0.5C-BSJ-UR & 0.5CHL-BSJ-UR 0.5C-BSJ-UK & 0.5CHL-BSJ-UK 0.5C-BSJ-IK & 0.5CHL-BSJ-IK
UPRIGHT INVERTED UPRIGHT or INVERTED ROTATING UPRIGHT KEYED INVERTED KEYED
0.5 FOR ORDERING: Specify “L”
4.5 3 dimension L (min) = Travel + 5.08
8 -24 UNF-2A
2.25 2.5 + 1.26 Sq
.97 2 × .59
TYP Ø 2.17 .87 + Travel .437 Travel
Clockwise Ø
Rotation .436
.6295 4.97
Raises Load 2×Ø Closed
4.97 .6322 .63
.375 Ø TYP.
.373 Closed Ball nut
3.62 4.22
.941 4.22 position A, 4.22
.938 1×1×3 2.44 Specify position B
8 16 4 2× 4.22
2.36 1.222 1.73 for opposite
4.25 .83 Keyway TYP. L
1.46 1.219
NON-KEYED KEYED
Max Input Max Allowable Tare Drag Backdrive Max Worm Speed Max Load at Max Worm Speed Max Load at
Turns of Worm Torque Input Torque holding torque Torque to raise 1 lb at Rated Load 1,750 rpm Torque to raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio for 1” Travel (in-lb) (hp) (in-lb) (ft-lb) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
0.5-BSJ
5:1 25 9.5 1
⁄3 1 1.0 .0095 1,800 1,000 .0105 1,800 1,000
Capacity: 0.5 tons
Screw: 0631-0200
20:1 100 4.0 1
⁄6 1 .25 .0040 1,800 1,000 .0044 1,080 1,000
0.5HL-BSJ
5:1 10 24.2 1
⁄3 1 2 .0242 868 496 .0266 790 450
Capacity: 0.5 tons
Screw: 0631-0500
20:1 40 10.2 1
⁄6 1 1 .0102 1,030 588 .0112 936 534
Screw Specs: 0.5C-BSJ Ball Nut and Flange 0.5C-BSJ & 0.5CHL-BSJ Options (Standard Steel Parts)
Root diameter (in): 0.500 .822 Top Plate (optional): 9000-00-12 Clevis End (optional): 9001-00-12
Start torque = 1.5 × Running
Ø1
Torque .796 R 1 1 B.C. 1
CUBIC JACKS
3 2 3 2 .312
1 8 -24 UNF-2B Ø
Approximate weight (lbs) 1
4
17 1 .319
“0” Travel: 3.5 Ø2
4
Ø
64 Ø21 Ø
3
2 1
4 4
4 Holes 3
Per inch travel: 0.3 17
on 1.750 BC
1
4
32 5
Grease: 0.3 9 16 13
Ø 4 Holes
32 16
0.5CHL-BSJ Ball Nut and Flange Ø
3 3
4 8 -24 UNF-2B
.700
Motor Mounts
1 Sq. see pg 180-181
Caution: Jack is self-lowering. Lifting screw must be secured to prevent rotation for non-keyed units. 1
3 .796 R
4
1 17
2 D D
4 64
17 4 Holes
32 on 1.750 BC
ONLINE
NON-KEYED KEYED
Max Backdrive
Turns of Max Input Allowable Tare Drag holding Torque to Max Worm Speed at Max Load at Torque to Max Worm Speed at Max Load at
Worm for Torque Input Torque torque raise 1 lb Rated Load 1,750 rpm raise 1 lb Rated Load 1,750 rpm
MODEL Gear Ratio 1” Travel (in-lb) (hp) (in-lb) (ft-lb) A (in) B (in) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
1C-BSJ
5:1 25 19 1
⁄2 3 1.5 5.57 4.57 .0095 1,660 1,895 .0104 1,515 1,731
Capacity: 1 ton
Screw: 0750-0200
20:1 100 9 1
⁄4 3 .5 5.57 4.57 .0045 1,750 2,000 .0049 1,608 1,837
1CHL-BSJ
5:1 10 48.2 1
⁄2 3 3.5 6.62 5.62 .0241 654 747 .0265 595 680
Capacity: 1 ton
Screw: 0750-0500
20:1 40 9 1
⁄4 3 1.5 6.62 5.62 .0114 691 790 .0125 628 718
1C-BSJ Ball Nut and Flange 1C-BSJ & 1CHL Options (Standard Steel Parts)
Screw Specs: .863 Top Plate (optional): 9000-00-11 Clevis End (optional): 9001-00-11
.312
Root diameter (in): 0.602 5 1 1 Ø
CUBIC JACKS
Ø116
.886 R 21 2 - 13 2 .322
Start torque = 1.5 × Running 1 29 2 B.C. UNC-2B
32 3
Torque 19 9
Ø 32 8 3
Ø 232 Ø31 Ø1
1 13 4
Approximate weight (lbs) 4 Holes 2 4 1
16
17 on 2.093 B.C.
“0” Travel: 7.2 32 3
Per inch travel: 0.04 7 8 13
Ø 4 Holes 1 1
Grease: 0.5 16 16 Ø1
4 2
-13 UNC-2B
1CHL-BSJ Ball Nut and Flange Motor Mounts
see pg 180-181
15
Caution: Jack is self-lowering. Lifting screw must be secured to prevent rotation for non-keyed units. Ø 116 .863
17 15 .937 R
2
32 16
9
Ø
19 32
Ø2
32 4 Holes
on 2.093 BC
ONLINE
CUBIC JACKS
* Torque to Raise 1 lb
Mini Jack Standard: MJABC-xx-U UPRIGHT ANTI-BACKLASH MJABC-xx-I INVERTED ANTI-BACKLASH MINI CUBIC JACK Nut and Flange MINI CUBIC JACK Options (Standard Steel Parts)
Start torque = 2 × Running Torque Top Plate (optional): 9000-00-12 Clevis End (optional): 9001-00-12
Approximate weight (lbs) .37 + 9 1
1 Ø 32 4 Holes 2 .312
“0” Travel: 3.0 .36 Travel 1 32 Ø1 1 1 Ø
8 on Ø1.75 B.C. 1 B.C. 3 - 24 UNF-2B .319
Ø2.25 2 1
Per inch travel: 0.2 8 2 1
Grease: 0.5 1 Ø2 1 Ø
3 1
3
.36 Ø2 4 4 4 4
3.57
17
32
9 5 13 3 3 - 24 UNF-2B
Ø 4 Holes Ø
32 16 16 4 8
1.13
Motor Mounts
see pg 180-181
1C-MSJ TOP VIEW 1C-MSJ-U UPRIGHT & INVERTED 1C-MSJ-UR UPRIGHT & INVERTED ROTATING 1C-MSJ-UK UPRIGHT & INVERTED KEYED
6.00 For ordering, specify “L” dimension
1 L(min) = travel + 5.07
3.00 .75 -13 UNC-2A
2
1.33 Clockwise
TYP Rotation .500
Raises Load Ø1.38 .63 Ø
2 × .59 .499
Ø .500 Acme nut
4.41 .498 TYP. .37 .6295 position A,
2×Ø
.6322 4.29
1.253 4.29 Specify position B
5.04 3.07 1.247 Closed for opposite
1 × 1 ×1
8 16 2×
1.14 Keyway TYP. 2.91 L
1.81 1.459 2.087
1.455
2.13 M8×1.25 - 6H - .59 Deep
4 × Nearside
1.24 4 × Farside .39 + Travel Ø1.31 M6 × 1.0 - 6H 2.50 + Travel
1.38 .47 Deep
1.67 4 × Ø .33 Thru 4 Holes Eq Sp
2.48 on Ø1.750 BCD 1.26 Sq.
2.76 1.260
Ø 1.261 - .17 Deep
3.35
NON-KEYED KEYED
Turns of Max Input Max allowable Max Worm Speed Max Load at Max Worm Speed Max Load at
Worm for 1” Torque Input Tare Drag Torque Torque to raise 1 lb at Rated Load 1,750 rpm Torque to raise 1 lb at Rated Load 1,750 rpm
MODEL Gear Ratio Travel (in-lb) (hp) (in-lb) (in-lb) (rpm) (lb) (in-lb) (rpm) (lb)
1C-MSJ
5:1 25 45 1
⁄2 3 .0225 700 800 .0259 608 695
Capacity: 1 ton
Screw: 3⁄4-5
20:1 100 21 1
⁄4 3 .0105 750 857 .0121 651 744
Screw Specs: 1ABC-MSJ-U 1ABC-MSJ-I 1-MSJ Nut and Flange 1-MSJ Options (Standard Steel Parts)
Root diameter (in): 0.502 UPRIGHT ANTI-BACKLASH INVERTED ANTI-BACKLASH Top Plate (optional): 9000-00-11 Clevis End (optional): 9001-00-11
Screw lead (in): 0.200 1
1 Ø
.312
1 2 .322
Start torque = 2 × Running Torque 17 Ø1 8 21 2 - 13
32 17 2 B.C. UNC-2B 3
Approximate weight (lbs) .50
.39 +
9
Ø 64 4 Holes 8 3
Travel 1 32 on 2.094 B.C.
“0” Travel: 5.2 Ø2.75 Ø31 Ø1
1 1
13 4
2 4 16
Per inch travel: 0.3 5
Ø2 8
Grease: 0.5 4.29 .5 3
7 8 13 1
Ø 4 Holes Ø1 1
16 16 4 -13 UNC-2B
2
CUBIC JACKS
Motor Mounts
see pg 180-181
1.38
ONLINE
EM05C-BSJ TOP VIEW EM05C-BSJ-U UPRIGHT EM05C-BSJ-I INVERTED EM05C-BSJ-UR UPRIGHT &
INVERTED ROTATING
115.0 20.0 For ordering, specify “L” dimension
57.5 M10 × 1.5-6g L(min) = travel + 137
2 20.0
25.0
TYP. TYP. Clockwise
Ø 55.0 2 × 15.0 22.0+ Travel
Rotation
Raises Load Ø10k6
15.990
Ø10h7 TYP. 2×Ø
136.0 16.058 20
92.0 23.90 Closed Ball nut
23.83 3 × 3 × 20h9 107.2 position A,
60.0 Keyway TYP. 62.0
108.0 21.0 107.2 Specify position B
37.0 31.05 44.0 for opposite
L
30.95
45.0 M8×1.25 - 6H - 13.0 Deep
4 × Nearside M5 × 0.8 - 6H 9.5
26.0 4 × Farside 22.0 + Travel 10.0 Deep 62
32.5 4 Holes Eq Sp on Ø30.0
4 × Ø 8.5 Thru 40.0
Ø40.00 BCD
52.0 TYP. Closed
65.0 Ø 26.7 22.000
Ø 22.021 - 4.3 Deep
Capacity Raise for One Turn Max Input Torque Max Allowable No Load Backdrive Holding Torque to Max Worm Speed Max Load at
MODEL Gear Ratio (kN) of Worm (mm) (N-m) Input (kW) Torque (N-m) Torque (N-m) Raise 1 kN (N-m) at Rated Load (rpm) 1,425 rpm (kN)
EM05C-BSJ
5:1 5 1.00 1.21 0.21 0.11 1.0 .24 1,625 5.0
Screw Specs: EM05-BSJ Ball Nut and Flange EM05-BSJ Options (Standard Steel Parts)
Screw: MRT 16x5 Top Plate (optional): 9000-EM-12 Clevis End (optional): 9001-EM-12
20
Root diameter (mm): 12.9 Ø45 B.C. 20
Start torque = 1.5 × Running Torque 25 Sq. R 20
M10x1.5-6H
15
Ø15H8
Drag torque (N-m): 0.11 42.5
Ø60 Ø18 55
30
Motor Mounts
see pg 180-181
CUBIC JACKS
Caution: Jack is self-lowering. Lifting screw must be secured to prevent rotation for non-keyed units.
ONLINE
EM1C-BSJ TOP VIEW EM1C-BSJ-U UPRIGHT EM1C-BSJ-I INVERTED EM1C-BSJ-UR UPRIGHT &
INVERTED ROTATING
For ordering, specify “L” dimension
152.0 25 L(min) = travel + 165
76.0
M12×1.5-6g
2.5 TYP 25.0 TYP 33.5 Clockwise
TYP Rotation 2 × 15.0 25.5 + Travel
Raises Load Ø 70.0
Ø14h7 Ø12k6
112.0 15.990
2 × Ø 16.058
31.83 190.0 25
128.0 78.0 31.67 Closed
5 × 5 × 25N9 152.5 Ball nut
29.0 Keyway TYP 74.0 position A,
46.0 2× 152.5
37.05 53.0 Specify position B
54.0 M8×1.25 - 6H - 15 Deep for opposite
36.95 L
4 × Nearside
31.5 4 × Farside
35.0 M6 × 1.0 - 6H 10.0
42.5 4 × Ø 8.5 Thru 12 Deep
25.5 + Travel
63.0 4 Holes Eq Sp Ø35.0
70.0 on Ø44.45 BCD 48
85.0 Closed
32.004
Ø 33.4 Ø 32.029 - 2.5 Deep
Capacity Raise for One Turn Max Input Torque Max Allowable No Load Backdrive Holding Torque to Max Worm Speed Max Load at
MODEL Gear Ratio (kN) of Worm (mm) (N-m) Input (kW) Torque (N-m) Torque (N-m) Raise 1 kN (N-m) at Rated Load (rpm) 1,425 rpm (kN)
EM1-BSJ
5:1 10 1.00 2.41 0.38 0.34 2.0 .24 1,500 10.0
Screw Specs: EM1C-BSJ Ball Nut and Flange EM1C-BSJ Options (Standard Steel Parts)
Screw: MRT 20x5 Top Plate (optional): 9000-EM-11 Clevis End (optional): 9001-EM-11
Root diameter (mm): 17.5 Ø60 B.C. 22
M12x1.5-6H
Start torque = 1.5 × Running Torque Ø36g6 Ø15H8
15
Drag torque (N-m): 0.34 14.5 56 Ø80 Ø32 30
Approximate weight (Kg) 60
Ø6.6
“0” Travel: 3.3 Ø64 (6 holes)
on 49 BCD M12x1.5-6H
Per 100mm travel: 0.23 Ø9 10 Ø32
25
Grease: 0.23 4 Holes
Motor Mounts
see pg 180-181
CUBIC JACKS
Caution: Jack is self-lowering. Lifting screw must be secured to prevent rotation for non-keyed units.
ONLINE
EM05C-MSJ TOP VIEW EM05C-MSJ-U UPRIGHT & INVERTED EM05C-MSJ-UR UPRIGHT &
INVERTED ROTATING
115.0 For ordering, specify “L” dimension
20 M10 × 1.5-6g
57.5 L(min) = travel + 123
2 TYP. 20 TYP. 25.0
TYP. Clockwise
Rotation Ø30.0 2 × 15.0
Raises Load 20.0 Ø10k6
9.0 15.990
Ø 10h7 2×Ø Travel nut
16.058 position A,
100
92.0 23.90 Closed Specify position B
108.0 60.0 23.83
3 × 3 × 20N9 for opposite
62.0
Keyway TYP. 31.05 44.0
37.0 21.0 30.95
L
45.0 M8×1.25 - 6H - 13.0 Deep
4 × Nearside 9.5 + Travel Ø26.7 M5 × 0.8 - 6H
26.0 4 × Farside 4.3 Deep
32.5 4 Holes Eq Sp on
52.0 TYP. 4 × Ø 8.5 Thru Ø40.00 BCD
65.0 22.000
Ø 22.021-.17 Deep
Capacity Raise for One Turn Max Input Torque Max Allowable No Load Torque to Max Worm Speed Max Load at
MODEL Gear Ratio (kN) of Worm (mm) (N-m) Input (kW) Torque (N-m) Raise 1 kN (N-m) at Rated Load (rpm) 1,425 rpm (kN)
EM05C-MSJ
5:1 5 0.80 2.25 0.27 0.11 0.45 1,130 4.0
Screw Specs: EM05-MSJ Nut and Flange EM05-MSJ Options (Standard Steel Parts)
Screw: Tr16x4 Top Plate (optional): 9000-EM-12 Clevis End (optional): 9001-EM-12
Root diameter (mm): 10.9 Ø28 1
2 .312
Start torque = 2 × Running Torque 1 1 B.C. Ø
27 2 3
.319
Ø66 8 -24 UNF-2B 1
Approximate weight (Kg) 2 1
Ø21 3
“0” Travel: 1.36 14 4 Ø
4 1
3
4
Per 100mm travel: 0.12 Ø7 4 Holes 5
Grease: 0.23 on Ø53.00 BC 9 16 13
Ø 4 Holes
32 16
3 3
Ø
4 8 -24 UNF-2B
Motor Mounts
see pg 180-181
CUBIC JACKS
Lifting screw must be secured to prevent rotation for non-keyed units.
Caution: Jack may be self-lowering in some operating conditions.
ONLINE
Capacity Raise for One Turn Max Input Torque Max Allowable No Load Torque to Max Worm Speed Max Load at
MODEL Gear Ratio (kN) of Worm (mm) (N-m) Input (kW) Torque (N-m) Raise 1 kN (N-m) at Rated Load (rpm) 1,425 rpm (kN)
EM1C-MSJ
5:1 10 0.80 5.19 0.36 0.34 0.52 N-m 665 rpm 4.7 kN
20:1 10 0.20 2.44 0.19 0.34 0.24 N-m 730 rpm 5.1 kN
Screw Specs: EM1C-MSJ Options Nut and Flange EM1C-MSJ Options (Standard Steel Parts)
Screw: Tr20x4 Top Plate (optional): 9000-EM-11 Clevis End (optional): 9001-EM-11
Root diameter (mm): 14.9 Ø60 B.C. 22
Start torque = 2 × Running Torque Ø34
33
M12x1.5-6H
Ø15H8
Approximate weight (Kg) 15
Ø80 Ø32 30
“0” Travel: 2.4 Ø75 60
Per 100mm travel: 0.19 14 M12x1.5-6H
Ø7 4 Holes
Grease: 0.23 on Ø90.00 BC Ø9
10
20 Ø32
4 Holes
Motor Mounts
see pg 180-181
CUBIC JACKS
Lifting screw must be secured to prevent rotation for non-keyed units.
Caution: Jack may be self-lowering in some operating conditions.
ONLINE
HANDBRAKES MITER GEAR ASSEMBLIES LINKJAC™ SHAFTING COMPACT LIMIT SWITCHES ROTARY LIMIT SWITCH NOOK SENSOR SYSTEM
page 190 page 191 page 192-193 page 196-197 page 198-199 page 200-201
JACK ACCESSORIES
FLEXIBLE COUPLINGS IN-LINE ENCODERS COUNTERS CONTROL PANELS TRUNNION ADAPTERS BELLOWS BOOTS PILLOW BLOCKS LUBRICATION AND PAINT
page 194-195 page 202 page 203 page 204-205 page 206-207 page 208-209 page 210 page 211-212
available for the jack sizes listed in the table. Non-standard motor ØF
(4 HOLES)
mounts can be designed for special requirements including, special
couplings, small NEMA frame motors, DIN standard motors, stepper B
øH
motor and servomotor designs. See page 190 for Servo Jack motor
mount examples, contact Nook Industries for additional information.
øD
For all other sizes and configurations, contact Nook Engineering. 90B14 115 180 140 96 115 9 95 4.5 12
JACK ACCESSORIES
2.5-BSJ-U 6:1 / X05-1 / SSE-2 / FT / 12.0 / S
No Motor Order Code Mounting Position
The High Efficiency Right-Angle Reducer is a compact, high quality 10:1 3.40 10,000 − − − −
worm gear reducer enclosed in an aluminum casted housing. The CODE Gear Ratio 15:1 2.27 10,000 − − − −
reducer mounts directly to the input side of the jack. Motors mount R5 5:1 5HL-BSJ-6:1 5:1 57.50 1,990 2,990 3,990 5,980 7,970
quill-style to a standard NEMA C-face. The High Efficiency Right- R7 7.5:1 7.5:1 38.33 2,960 4,440 5,920 8,890 10,000
Angle Reducers are non-vented, oil filled, and maintenance free.
R10 10:1 10:1 28.75 3,850 5,780 7,700 10,000 −
They are rated at 85% or greater efficiency - allowing for a smaller
drive and motor when compared with standard efficiency right-angle R15 15:1 15:1 19.17 5,510 8,270 10,000 − −
reducers.
5HL-BSJ-24:1 5:1 14.38 5,040 7,560 − − −
High Efficiency Right-Angle Reducers are available in a variety of 7.5:1 9.58 7,490 10,000 − − −
NEMA motor mounts.
10:1 7.19 9,740 10,000 − − −
Consult the data charts for jack capacity when a Right-Angle Reducer 15:1 4.79 10,000 − − − −
is used. Ratings given on the chart may differ when a Right-Angle
10-BSJ-8:1 7.5:1 13.62 − 11,370 15,160 20,000 −
Reducer is installed on Keyed or Anti-Backlash Machine Screw Jack
models. Special consideration must be given when installing onto a 10:1 10.21 − 15,000 20,000 − −
Double-Clevis Jack due to the additional weight of the reducer. 15:1 6.81 − 20,000 − − −
Max input RPM is 1725rpm. 10-BSJ-24:1 7.5:1 4.54 − 20,000 − − −
10:1 3.40 − 20,000 − − −
BALL SCREW JACKS 15:1 2.27 − 20,000 − − −
10HL-BSJ-8:1 7.5:1 28.75 − 5,380 7,180 10,760 14,350
Dynamic Capacity per Motor Horsepower (lb) ** 10:1 21.56 − 7,100 9,470 14,200 18,930
Jack Reducer
Model-Ratio Ratio Travel Rate* 1
⁄4 1
⁄3 1
⁄2 ⁄4
3
1 11⁄2 15:1 14.38 − 10,170 13,560 20,000 −
2.5-BSJ-6:1 5:1 14.38 3,780 5,000 − − − −
20-BSJ-8:1 7.5:1 14.38 − − − 22,130 29,510
7.5:1 9.58 5,000 − − − − −
10:1 10.78 − − − 29,140 38,860
10:1 7.19 5,000 − − − − −
15:1 7.19 − − − 40,000 −
15:1 4.79 5,000 − − − − −
20-BSJ-24:1 7.5:1 4.79 − − − 40,000 −
2.5-BSJ-24:1 5:1 3.59 5,000 − − − − −
10:1 3.59 − − − 40,000 −
7.5:1 2.40 5,000 − − − − −
15:1 2.39 − − − 40,000 −
10:1 1.80 5,000 − − − − −
20HL-BSJ-8:1 7.5:1 28.75 − − − 11,100 14,800
JACK ACCESSORIES
15:1 1.20 5,000 − − − − −
10:1 21.56 − − − 14,620 19,490
2.5HL-BSJ-6:1 5:1 57.50 950 1,270 1,910 2,860 3,820 5,000
15:1 14.38 − − − 21,180 28,240
7.5:1 38.33 1,400 1,860 2,800 4,190 5,000 −
20HL-BSJ-24:1 7.5:1 9.58 − − − 22,130 29,510
10:1 28.75 1,820 2,430 3,640 5,000 − −
10:1 7.18 − − − 29,140 38,860
15:1 19.17 2,640 3,520 5,000 − − −
15:1 4.79 − − − 40,000 −
* measured in in/min at the max rated rpm of 1,725 rpm * measured in in/min.@ 1,725 rpm
** Full nominal static capacity of jack is retained ** Full nominal static capacity of jack is retained
15 1.20 5,000 − − − − − −
5-MSJ-6:1 5 21.56 − − 2,050 3,080 4,100 6,150 8,210 Dimensions (in)
NEMA
7.5 14.38 − − 3,050 4,570 6,100 9,150 10,000 JACK SIZE FRAME A B C D E F G H J K L M
10 10.78 − − 3,960 5,940 7,930 10,000 − 2.5 56C 5.63 7.60 1.75 3.15 2.81 1.58 5.12 0.43 6.50 0.22 3.19 1.97
5 TON 56C 7.59 10.09 2.19 3.54 3.31 1.97 5.90 0.43 6.50 0.11 4.40 2.36
15 7.19 − − 5,670 8,510 10,000 − −
10/15 TON 56C / 140TC 9.22 11.92 2.60 4.13 4.02 2.46 6.96 0.43 6.50 0.55 3.62 2.83
5-MSJ-24:1 5 5.39 − − 5,360 8,030 − − −
20 TON 56C / 140TC 9.67 12.56 2.88 4.96 4.69 2.95 8.35 0.43 6.50 0.10 2.60 3.38
7.5 3.59 − − 7,960 − − − −
10 2.70 − − 10,000 − − − −
15 1.80 − − 10,000 − − − −
10-MSJ-8:1 7.5 14.38 − − − 4,550 6,070 9,110 12,140
10 10.78 − − − 6,010 8,010 12,020 16,020
15 7.19 − − − 8,610 11,480 17,210 20,000 1 2
10-MSJ-24:1 7.5 4.79 − − − 8,940 11,920 17,880 −
10 3.59 − − − 11,800 15,730 20,000 −
15 2.40 − − − 16,900 20,000 − −
15-MSJ-8:1 7.5 14.38 − − − 4,220 5,620 8,440 11,250
10 10.78 − − − 5,570 7,420 11,130 14,840 3 4
15 7.19 − − − 7,970 10,630 15,950 21,260
15-MSJ-24:1 7.5 5.99 − − − 7,880 10,500 15,750 −
10 3.59 − − − 10,390 13,850 20,780 −
15 2.40 − − − 14,880 19,850 29,770 −
20-MSJ-8:1 7.5 14.38 − − − − − 7,990 10,650 5 6
10 10.78 − − − − − 10,520 14,030
JACK ACCESSORIES
15 7.19 − − − − − 15,240 20,320
20-MSJ-24:1 7.5 4.79 − − − − − 15,940 21,250
10 3.59 − − − − − 20,990 27,990
15 2.40 − − − − − 30,410 40,000
7 8
* measured in in/min.@ 1,725 rpm
** Full nominal static capacity of jack is retained
H
D
G C
5 6
A E
B
BALL SCREW JACKS
JACK ACCESSORIES
10HL-BSJ-8:1 6:1 35.9 1 4,275 10BSR6 10RTR6 X05R6 56C 7.25 9.25 6.29 3.69 3.31 1.750 5.88 .50 6.69
10-MSJ-24:1 6:1 5.99 1 7,000 10BSR6 10RTR6 X05R6 56C 7.25 9.25 6.29 3.69 3.31 1.750 5.88 .50 6.69
20-BSJ-8:1 8:1 13.5 3 35,000 N/A 30RTR8 X18R8 180TC 9.00 11.75 9.00 6.12 5.38 2.875 9.00 .88 9.12 15-MSJ-24:1
12:1 2.99 1 10,000 10BSR12 10RTR12 X05R12 56C 7.25 9.25 6.29 3.69 3.31 1.750 5.88 .50 6.69
20-BSJ-24:1 8:1 4.49 2 40,000 N/A 20RTR8 X18R8 180TC 9.00 11.75 9.00 6.12 5.38 2.875 9.00 .88 9.12
20-MSJ-8:1 8:1 13.5 7 ⁄2
1
31,000 N/A 75RTR8 X21R8 210TC 9.00 11.75 9.00 6.12 5.38 2.875 9.00 .88 9.12
20HL-BSJ8:1 8:1 26.9 5 30,000 N/A 50RTR8 X18R8 180TC 9.00 11.75 9.00 6.12 5.38 2.875 9.00 .88 9.12
8:1 13.5 5 22,500 N/A 50RTR8 X18R8 180TC 9.00 11.75 9.00 6.12 5.38 2.875 9.00 .88 9.12
20HLBSJ-24:1 8:1 8.98 3 35,000 N/A 30RTR8 X18R8 180TC 9.00 11.75 9.00 6.12 5.38 2.875 9.00 .88 9.12
20-MSJ-24:1 8:1 4.49 3 25,000 N/A 30RTR8 X18R8 180TC 9.00 11.75 9.00 6.12 5.38 2.875 9.00 .88 9.12
⁄2
1
05RT [3] 05RW [3] 05RE [3] 05MT [7] 05BS [3] 4 .50 1 ⁄2
1
1 ⁄16
3
1 ⁄8
5
⁄8
5
H044
2-MSJ
3
⁄4 07RT [6] 07RW [6] 07RE [6] 07MT [7] 07BS [6] 6 .50 2 1 ⁄16
9
2 ⁄16
9
⁄4
3
H064
1 10RT [6] 10RW [6] 10RE [6] 10MT [7] 10BS [3] 4 .50 1 ⁄2
1
1 ⁄16
3
1 ⁄8
5
⁄8
5
H044
2.5-MSJ
11⁄2 15RT [6] 15RW [10] – 15MT [9] – 6 .50 2 19⁄16 29⁄16 ⁄4
3
H064
2 20RT [10] 20RW [10] 20RE [10] 20MT [20] – 6 .75 2 1 ⁄16
9
2 ⁄16
9
⁄4
3
H066
3 30RT [15] 30RW [15] 30RE [15] 30MT [20] – 5-MSJ 8 .75 2 ⁄4
1
1 ⁄32
25
2 ⁄16
15
⁄8
7
H086
5 50RT [25] 50RW [25] 50RE [25] 50MT [25] – 10 .75 3 2 ⁄4
1
3 ⁄16
15
1 H106
71⁄2 75RT [35] – – 75MT [40] –
8 1 2 ⁄4
1
1 ⁄32
25
2 ⁄16
15
⁄8
7
H088
* Motor rpm between 1620 and 1680 for Economy motors. For speed critical application please contact Nook Engineering. 10-MSJ
10 1 3 21⁄4 315⁄16 1 H108
SERVO/STEPPER MOTORS 8 1 2 ⁄4
1
1 ⁄32
25
2 ⁄16
15
⁄8
7
H088
15-MSJ
10 1 3 2 ⁄4
1
3 ⁄16
15
1 H108
ActionJac™ Servo or Stepper Jacks offer the ability to attach Custom Motor Adaptors are designed to accommodate any specified
8 1 2 ⁄4
1
1 ⁄32
25
2 ⁄16
15
⁄8
7
H088
a servo or stepper motor to a ball screw or machine screw jack. coupling and motor. Servo or Stepper Jacks can be delivered as a 20-MSJ
Using a servo or stepper motor increases control of acceleration, complete assembly, including a vendor-specified motor. Contact 10 1 3 2 ⁄4
1
3 ⁄16
15
1 H108
deceleration, travel rate and positioning accuracy compared with Nook Industries for further assistance with jack applications requiring
standard NEMA framed motors. servo or stepper motors.
Allen Bradley
HOW TO ORDER A JACK WITH A HANDWHEEL
Baldor EXAMPLE:
Reliance 2.5-MSJ-U 24:1 / H064-1 / SSE-2 / FT / 12.0 / S
JACK ACCESSORIES
Kollmorgen
Mitsubishi Product Code (from chart above) Mounting Position
Below is a partial list of companies we have Siemens
designed planetary gear reducer adapters for:
Applied Motion
Bayside Yasawa
Apex Parker
Alpha Bosch Rexroth
CGI ONLINE
A handbrake is a convenient solution for manually securing machine HOW TO ORDER A JACK WITH A HANDBRAKE Jacks may be used in multiple arrangements by connecting shafting, GB210, GB210S, GB210S-R2
screw jacks. Handbrakes can be used on machine screw jacks 2.5 EXAMPLE: couplings and gear boxes to simultaneously transmit power to the 7 3
5
8 13
ton to the 5 ton capacity. 2.5-MSJ-U 6:1 / HBT-1 / SSE-2 / FT / 12.0 / S input shafts of the jacks. Nook Industries provides gearboxes for 1 Pipe Plug (2)
1
4
15
16
1
16
4 3
use with jacks. Make certain that the total torque and horsepower 8
Handbrakes can be ordered with either a standard shaft extension, Product Code (from chart above) Mounting Position 13
required by the arrangement does not exceed the ratings of the box. 3 3 1
16
an extended shaft extension, or with a handwheel. See page 189 for 4 4
For optimum life and noise levels, operate below 900 rpm. Higher 2
7
handwheel details. Example of counter designations: 8
speeds are permissible at lower torque ratings. Noise levels may
HBT-2 = Handbrake with extended shaft extension, position 2 3
9
Dash number designates mounting position increase at higher speeds. The operating efficiency of a miter gear 5
16
HANDBRAKE AS A KIT box is 90%. 16 - 18 Tapped
mounting holes (8)
4
11
16
Handbrake Kits come with Handbrake, Adjustable Handle, two
1
1
socket head cap screw (SHCS), and two lock washers. To install, Rated Load at 1700 rpm 3 Keyway
16
3
remove two adjacent SHCS, and lock washers securing the End Cap. Continuous Duty Intermittent Duty
16 TYP.
4
Discard SHCS and lock washers. Clean shaft from any debris or Est.
Gear Torque Torque Weight
contamination. Slide the Handbrake over the shaft until fully against GB15
Model Ratio HP (in-lb) HP (in-lb) (lb) 1
the End Cap. Install the provided SHCS and lock washers in place of 11
1
4
8 1
GB210 1:1 7.67 284 14.44 535 61⁄4 5
2
2
16
the two that were removed, securing the Handbrake and End Cap 2
TYP. .999
in place. HBE HBT HB_* GB210S* 1:1 5.75 213.24 10.82 401.32 61⁄4 3 .998
2 D TYP. 1
4 2
8
GB210S-R2* 2:1 3.01 111.54 5.56 206.31 61⁄4
1
GB15 1:1 30.5 1,131 38.33 1,421 26 4
4
Jack Size Kit Part Number
1
2.5-MSJ GB12** 1:1 60.51 2724.13 70.48 3172.91 39 1 STD 4
HB-025 Product Code Shaft Extension 5
2 3 Keyway TYP.
-16 THDS
8 4 Holes
5-MSJ HB-050 HBE standard shaft extension * Spiral bevel gear set 1 NPT pipe plug
both sides 4 3 places
** Rated Load calculated at 1400 rpm (one vented)
HBT extended shaft extension 2
1
1 8
4
HBA with 4” handwheel* 4
GB12
HBB with 6” handwheel*
5
13 5
1 8 13
HBC with 8” handwheel* 6
2
2
16
1 1.2495
2
2
HBD with 10” handwheel* TYP.
1.2480
7 D TYP. 1
2 2
8 4
*See handwheel page 189 to select the correct
size for jack model 4
1
2
1
1 Std 4
6 Keyway TYP.
CAUTION - Handbrakes are only intended to prevent “creep” 2
1 -13 THDS
2 4 Holes 1
due to vibration with machine screw jacks only. They are not Both sides 2 NPT Pipe Plug
3 Places
designed to be used with ball screw jacks. (One vented)
1
2
4
Depending on the magnitude of vibration and application life 4
1
2
cycles, the handbrake may not be sufficient to secure the load. Gears are forged alloy steel. Shafts are stressproof steel ground and GB210, GB210S, and GB210S-R2 are filled with EP-90 Gear lubricant
Handbrakes are not intended to be used where personal injury polished. Clockwise (CW) and counterclockwise (CCW) notations at time of shipment. GB15 and GB12 are shipped dry. Fill with EP-
could occur. indicate direction of shaft rotation when facing outer end of shaft. All 90 Gear Lubricant: Capacity 1 qt.
HANDBRAKE POSITIONS shaft arrangements will operate o pposite direction for that shown. To
JACK ACCESSORIES
order specify model number and desired shaft arrangement.
CW CCW CW CCW
2 2 3 2 3 2 2 2
CW CW CCW CCW
CW CW CW CW CW CW
1 1 1 1 1 1
ActionJac™ LinkJac™ Line Shafting is used to interconnect the input CRITICAL SPEED TORSIONAL TWIST DESIGN INFORMATION
shafts of ActionJac™ Worm Gear Screw Jacks used in a multiple The speed that excites the natural frequency of the screw is referred The degree of twist experienced by LinkJac™ Line Shaft or Tubular The length used in the previously listed formulas is the unsupported
arrangement. The shafts transfer the torque from the motor to the to as the critical speed. Shafting when a given amount of torque is applied. To insure proper length of the shaft. If support bearings are used on the shaft, the
jack or from jack to jack. LinkJac™ is available in either steel Line synchronization of ActionJac™ motion, it is recommended not to length is the longest unsupported length between bearings.
Since the speed can also be affected by shaft straightness and
Shafting available in standard lengths up to 144”, or in aluminum exceed 1° of twist. The theoretical formula to calculate torsional
assembly alignment, it is recommended that the maximum speed be The previously listed formulas give a theoretical value of critical
Tubular Shafting with bonded journals of stainless steel available in twist in degrees is;
limited to 80% of the calculated critical speed value. The theoretical speed and torsional twist. Alignment, straightness and stiffness of
lengths up to 196”. Custom end machining and other diameters are
formula to calculate critical speed in rpm is; the system all contribute to determining the actual value.
available. Contact Nook Industries for information.
NTwist = T × L. The torque in the system is also limited by the torque capacity of
SELECTION: Ct
NSpeed = .6192 × ( π )2 x Cs the coupling.
There are two major concerns when selecting interconnect shaft:
L WHERE:
Allow appropriate spacing between the jack input shaft and the
Critical Speed: How fast will the shaft be turning? WHERE: N = Torsional Twist in degrees LinkJac™ Line Shaft or Tubular Shafting inside the coupling.
Torsional Twist: How much torque will the shafts be transmitting? N = Critical Speed in revolutions per minute L = Length of shaft in inches For some combinations of couplings and jacks, the radius of the
The two characteristics of a LinkJac™ Line Shaft or Tubular Shafting L = Length of unsupported shaft in inches Ct = Value list from table below suggested coupling is larger than the distance from the center of
which can be varied to accommodate these requirements are: the worm shaft to the base.
Cs = Value list from table below T = Torque
• Length of the shaft Nook Industries offers a range of couplings for use with LinkJac™
Line Shaft or Tubular Shafting and ActionJac™ products in both
• Diameter of the shaft Radial support bearings may be needed in order to accommodate floating shaft and supported shaft applications. See pages 190-191
the required input rpm. See page 210 - 211 for radial support bearing for more information.
selection.
When selecting a LinkJac™ Line Shaft or Tubular Shafting, use
the largest diameter or shortest length which satisfies both of the
following equations.
LINE SHAFTING
LJK
L Keyway
OD
L
Keyway
A
Keyway
OD (in) Keyway (in) Length (in) A B Material Ct Cs Weight/in (lb) OD
B
LJ-8 1
⁄2 - - - - Steel 1,235 3.895 × 10 5
0.056
LJ-12 3
⁄4 - - - - Steel 6,250 5.851 × 105 0.125
LJ-16 1 - - - - Steel 19,500 1.168 × 10 6
0.223
JACK ACCESSORIES
LJ-24 11⁄2 - - - - Steel 95,000 1.169 × 106 0.502 Keyway
Metric Tubing OD (in [mm]) Keyway (mm) Length (mm) A (mm) B (mm) Material Ct Cs Weight/in (lb)
LJK-8 1
⁄2 1
⁄8 × 1⁄16 Full Length - - Steel 1,235 3.895 × 105 0.056
LJT-27 1.06 [27] 5 × 2.5 28 35 14h7 Aluminium 3,375 9.798 × 10 5
0.035
LJK-12 3
⁄4 ⁄16 × 3⁄32
3
Full Length - - Steel 6,250 5.851 × 105 0.125
LJT-40 1.57 [40] 6×3 40 45 18h7 Aluminium 12,250 1.504 × 10 6
0.055
LJK-16 1 1
⁄4 × 1⁄8 Full Length - - Steel 19,500 1.168 × 106 0.223
LJT-50 1.99 [50] 6×3 40 55 22h7 Aluminium 25,000 1.907 × 106 0.069
LJK-24 11⁄2 3
⁄8 × 3⁄16 Full Length - - Steel 95,000 1.169 × 106 0.502
LJT-60 2.36 [60] 8 × 3.5 50 55 30h7 Aluminium 43,750 2.312 × 106 0.084
* When adding modified keyways to standard LinkJac™ shafting, please contact Nook Engineering.
FLEXIBLE COUPLINGS C
C-3020-01 111 0.10 12 1.38 1.18 0.43 0.51 1.27 0.45 0.375 1
⁄8 × ⁄16
1
0.375 1
⁄8 × ⁄16
1 P-2200-288 - 210 0.37 2.13 1.89 1.46 1.26 0.98 0.16 0.500 1
⁄8 × ⁄16
1
0.500 1
⁄8 × 1⁄16
C-3025-01 150 0.30 93 2.60 1.57 0.98 0.63 1.81 0.57 0.500 1
⁄8 × 1⁄16 0.500 1
⁄8 × 1⁄16 P-2200-185 - 210 0.37 2.13 1.89 1.46 1.26 0.98 0.16 0.500 1
⁄8 × 1⁄16 0.750 3
⁄16 × 3⁄32
C-3025-05 150 0.30 93 2.60 1.57 0.98 0.63 1.81 0.57 0.500 1
⁄8 × 1⁄16 0.625 3
⁄16 × 3⁄32 P-2200-193 - 210 0.37 2.13 1.89 1.46 1.26 0.98 0.16 0.625 3
⁄16 × ⁄32
3
0.750 3
⁄16 × 3⁄32
C-3025-02 150 0.30 93 2.60 1.57 0.98 0.63 1.81 0.57 0.500 1
⁄8 × 1⁄16 0.750 3
⁄16 × 3⁄32 P-2200-196 - 260 0.71 2.2 2.05 1.61 1.42 1.02 0.16 0.625 3
⁄16 × 3⁄32 0.750 3
⁄16 × 3⁄32
JACK ACCESSORIES
C-3025-03 150 0.30 93 2.60 1.57 0.98 0.63 1.81 0.57 0.625 3
⁄16 × 3⁄32 0.625 3
⁄16 × 3⁄32 P-2200-178 - 210 0.37 2.13 1.89 1.46 1.26 0.98 0.16 0.750 3
⁄16 × 3⁄32 0.750 3
⁄16 × 3⁄32
C-3025-04 150 0.30 93 2.60 1.57 0.98 0.63 1.81 0.57 0.625 3
⁄16 × 3⁄32 0.750 3
⁄16 × 3⁄32 P-2200-182 - 260 0.71 2.2 2.05 1.61 1.42 1.02 0.16 0.750 3
⁄16 × 3⁄32 0.750 3
⁄16 × 3⁄32
C-3025-06 150 0.30 93 2.60 1.57 0.98 0.63 1.81 0.57 0.750 3
⁄16 × 3⁄32 0.750 3
⁄16 × 3⁄32 P-2200-183 - 610 1.64 3.31 2.6 1.81 1.73 1.57 0.16 0.750 3
⁄16 × 3⁄32 1.000 1
⁄4 × 1⁄8
C-3030-01 531 0.62 93 3.07 2.17 1.18 0.71 2.26 0.79 0.750 3
⁄16 × 3⁄32 1.000 1
⁄4 × 1⁄8 P-2200-191 - 610 1.64 3.31 2.6 1.81 1.73 1.57 0.16 0.750 3
⁄16 × ⁄32
3
1.125 1
⁄4 × 1⁄8
C-3030-02 531 0.62 93 3.07 2.17 1.18 0.71 2.26 0.79 1.000 1
⁄4 × 1⁄8 1.000 1
⁄4 × 1⁄8 P-2200-177 - 1,170 3.31 3.46 3.62 1.97 2.56 1.46 0.55 1.000 1
⁄4 × 1⁄8 1.000 1
⁄4 × 1⁄8
Sense (White)
CLSR-4 – Standard CLS w. SPDT limit switches, Reed Switch, Pos 4 Ref. VDC(Red)
JACK ACCESSORIES
CLSH-3 – Standard CLS w. SPDT limit switches, Hall Effect, Pos 3 NOTE: While the 10-turn potentiometer is rated for 10,000 Ohms, POT
Product
as implemented in the compact limit switch assembly, it can not
Code Switch Type Feedback
CLSP-1 – Standard CLS w. SPDT limit switches, Potentiometer, Pos 1 and should not operate over its full range. Minimum and maximum REED SWITCH HALL EFFECT SENSOR
CLSS SPDT –
IMPORTANT: These designation numbers are not complete part resistance values can not be known until the unit is installed and
CLSR SPDT Reed Switch final travel limit adjustments have been made. Therefore, the device
numbers. These assemblies contain gear reducers with ratios that Blue Limit Switch 2 Blue Limit Switch 2
vary according to the model and travel of the jack. If you are ordering CLSH SPDT Hall Effect Sensor connected to the potentiometer should include provisions for Pink Limit Switch 1 Pink Limit Switch 1
a replacement switch assembly, complete information on the jack trimming to compensate for these values. White White
CLSP SPDT Potentiometer
is required. Pulse (Purple)
110 VDC or
5-10 VDC (Black)
Pulse (Black) 100 VAC Pulse (Purple)
.5 Amps max
Gnd. (Green)
JACK ACCESSORIES
A
4CA
DPDT, 10 amps
4 SPDT no
4CE 4 DPDT no 10-TURN POTENTIOMETER:
0-500 OHM, 2 Watt A
PTA 2 SPDT yes CAUTION: Limit switches are not adjusted at the factory. Switches 2
NOTE: While the 10-turn potentiometer is rated for 0-500 Ohms, B
PTC 2 DPDT yes should be set during installation.
as implemented in the rotary limit switch assembly, it can not and
Instructions for setting the limit switch is available online at should not operate over its full range. Minimum and maximum
Must be the same polarity
www.nookindustries.com. resistance values can not be known until the unit is installed and To maintain rating, Switch 1 and 2 can be
final travel limit adjustments have been made, therefore, the device terminals must be common. opposite polarity.
connected to the potentiometer should include provisions for
trimming to compensate for these values.
198 NOOK PRECISION ACTUATORS nookindustries.com
The specifications and data in this publication are believed to be accurate and reliable. However, it is the responsibility of the product user to determine the suitability of
Nook Industries products for a specific application. While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement. 199
JACK ACCESSORIES
NOOK SENSOR SYSTEM (NSS) ™ PATENT PENDING
The Nook Sensor System (NSS) is designed to meet the need for
low cost position sensing on worm-gear screw jacks. It is highly A B Sensor A B Sensor
accurate, with repeatability up to ± .004” (0.1MM). The patented Inch Jack Models (in) (in) Bandwidth (in) Metric Jack Models (mm) (mm) Bandwidth (mm)
design allows users to install and adjust sensors on a single screw 05-BSJ and all MINI JACKS 2.83 1.88 .33 EM05-BSJ and EM05-MSJ 72 48 8
jack and integrate easily with a motion control system. Since there is 1-BSJ and 1-MSJ 2.83 1.88 .33 EM1-BSJ and EM1-MSJ 72 48 8
zero maintenance, the Nook Sensor System helps control screw jack
2-BSJ and 2-MSJ 2.83 2.25 .33 EM2.5-BSJ and EM2.5-MSJ 72 57 8
systems in ways that have never before been possible.
2.5-BSJ and 2.5-MSJ 2.83 2.25 .33 EM5-MSJ 81 86 13
The sensor system is supplied with two PNP or NPN (normally
5-MSJ 3.19 3.38 .5 EM5-BSJ-I 81 86 13
open) switches. For additional switches or to order a normally closed
switch, contact Nook Application Engineers. 5-BSJ-I and 5HL-BSJ-I 3.19 3.38 .5 EM5-BSJ-U 90 86 13
5-BSJ-U and 5HL-BSJ-U 3.56 3.38 .5 EM10-MSJ 90 86 13
10-MSJ 3.83 3.38 .5
HOW TO ORDER THE NOOK SENSOR SYSTEM™
Product Code
P = PNP
N = NPN
A + Travel
The NSS is designed to allow easy field adjustments. Two magnets Movable sensor Magnet Lift shaft
are secured to the end of the lift shaft to ensure a positive response
once it passes near the position sensor. To adjust the position B
sensors simply position the lift shaft in the correct position, loosen
the locking screw, and then slide the movable sensor to the desired
location until the sensor indicates a response. The NSS is supplied Locking screw Movable sensor
with three slots in the stem cover, and two position sensors.
Additional sensors can be added or moved to any of the three slots.
It is also possible to add multiple sensors to the same slot.
MAX OPERATING SPEED WHEN USING THE NOOK SENSOR SYSTEM IS 60 IN/MIN
JACK ACCESSORIES
Nook worm gear screw jacks are used widely in the commercial food industry. Nook worm gear screw jacks used in a conveyor application.
Supply Voltage Channel B Output corresponding position in a counter window. The display value per
line encoder option may be factory installed between the motor and +12VDC (Red wire) (Brown wire)
input shaft revolution is variable and is achieved through a series of
motor adapter or Right-Angle Reducer. This lowcost option requires
gear reductions configured to accommodate different jack ratios,
minimal space, leaving the extension shaft side of the jack free for
lift shaft leads and travel distances. Contact Nook Industries to
clearance, for a rotary limit switch, or for coupling to another jack.
determine actual readout scaling available for your application.
The in-line encoder’s quadrature output design allows detection of Not for use with motorized applications. Long travel may result in
both speed and direction of shaft rotation. counter “rollng over.”
The ActionJac™ in-line encoder option requires an optional motor OUTPUT CHANNEL WAVEFORMS
mount or Right-Angle Reducer.. SPECIFY:
1 Cycle • Determine Mounting Position
• Sensing speed range: 0 -10,000 rpm
90 Deg. • Count Increase or Decreases with Extension of Shaft
• Pulse output: 60 Pulses per revolution Hi (+12 VDC)
• Supply voltage: +5 to 24 Volts DC +/-5% A Lo (0 VDC) EXAMPLE: 2.5-MSJ-U 6:1 / SSE-1 / CTI-2 / FT / 24.5 / S
• Supply current: 60 mA typical, 115 mA maximum Extension Shaft Designation
B
• Output drive capability: 250 mA per channel continuous
Example of counter designations: Increase or
• Maximum load: 50 ohms per channel CTI-2 = Counter increasing with extension of lift shaft, position 2 Decrease with
OUTPUT CHANNEL SCHEMATIC (CHANNELS A & B) Dash number designates mounting position Product Code extension of travel Shaft Extension
The encoder is face mounted between the motor and motor mount Product code (see table to the right) CEI Increase without shaft extension
and will offset the length of the motor .61 inches for NEMA 56 and Supply voltage
CED Decrease without shaft extension
140 frames and .88 inches for NEMA 180 and 210 frames. Optional Pullup
CAUTION - Consult Nook Engineering when adding a counter. Some
3K Resistor
CTI Increase with worm shaft extension
jack configurations may have limited travel.
Channel output
Channel A CTD Decrease with worm shaft extension
Channel B
CAI Increase with 4” handwheel*
Analog common
CAD Decrease with 4” handwheel*
CBI Increase with 6” handwheel*
CBD Decrease with 6” handwheel*
CCI Increase with 8” handwheel*
CCD Decrease with 8” handwheel*
CDI Increase with 10” handwheel*
CEI CTI C I*
CED CTD C D* CDD Decrease with 10” handwheel*
1/2" NPT
JACK ACCESSORIES
HOW TO ORDER AN IN-LINE ENCODER
Specify the Worm Gear Screw Jack reference number, using the
system described on page 31, 69, 103, 123, 141, and 161.
EXAMPLE:
A
2.5-MSJ-U 6:1 / 10BT-1 / 2CA-4E / FT / 24.5 / ES
FRAME-SIZE 56C/140TC 180TC/210TC Product Code
OFFSET A .61 .88
Nook Industries control panels are designed to match the motor Benefits:
when shipped from the factory. The control panels are acceptable • The control matches the motor with no design time required Ø 0.31
to use in most industrial environments (including automotive). TYP 10.00
• The control is acceptable to use in most industrial environments
Functionality of the control panel can be customized to match any (including automotive)
application and spare parts are readily available. • Spare parts are readily available
The control panel interconnects with other safety/control systems. • Functionality of the control can be customized to match any 20.75
application
14.75
• The control interconnects with other safety/control systems
Motor Capacities:
1
⁄4 up to 2 HP 1-phase 115-230V
⁄4 up to 15 HP 3-phase 230-460-575 VAC induction motors with or
1
JACK ACCESSORIES
Contact Nook Engineering for
20 ft Cable
ordering information
Trunnion adapter plates bolt to the jack flange and have precision G
bores for trunnion pins.
J
H J
DESIGN INFORMATION
P
The trunnion pins should be supported to within 1⁄16 inch of the M
C
P
F B F + Travel N
trunnion adapter plate. See the “A” dimension in the table for the C Closed
60,000 psi. P
J
K
K
J
P
J P
C M C
+ Travel
N
C Closed
P
UPRIGHT INVERTED
UPRIGHT INVERTED ROTATING ROTATING
JACK MODEL TRUNNION PART NO. A B C D E F G H J P K M N K M N K K
2.5-MSJ TA-0025 6.50 3.88 1.25 0.7491 - 0.7479 1.25 .13 1.750 2.50 2.32 .56 4.38 1.38 5.75 4.38 .69 2.06 4.38 4.38
5-MSJ TA-0050 8.25 5.75 1.50 0.9991 - 0.9979 1.50 .13 2.188 3.13 2.94 .69 5.44 1.44 7.69 5.44 .63 3.06 5.44 5.44
10-MSJ TA-0100 9.00 7.25 2.00 1.2488 - 1.2472 1.50 .13 2.600 3.00 3.13 .88 5.75 1.75 7.75 5.75 .63 3.12 5.75 5.75
20-MSJ TA-0200 11.25 8.00 2.25 1.4988 - 1.4972 1.75 .13 2.875 4.25 4.25 100 7.75 1.84 10.25 7.75 .63 3.75 7.75 7.75
2.5-BSJ TA-0025 6.50 3.88 1.25 0.7491 - 0.7479 1.25 .13 1.750 2.50 2.32 .56 6.81 2.31 8.19 6.81 1.63 2.06 4.38 4.38
5-BSJ TA-0050 8.25 5.75 1.50 0.9991 - 0.9979 1.50 .13 2.188 3.13 2.94 .69 10.00 2.31 11.88 10.00 1.75 3.06 5.44 5.44
10-BSJ TA-0100 9.00 7.00 2.00 1.2488 - 1.2472 1.38 .13 2.600 3.00 3.13 .88 10.00 2.75 12.25 10.00 1.63 3.37 5.75 5.75
20-BSJ TA-0200 11.25 8.00 2.25 1.4988 - 1.4972 1.75 .13 2.875 4.25 4.25 1.00 15.75 3.63 18.25 15.7 2.38 3.75 7.75 7.75
JACK ACCESSORIES
ONLINE
STANDARD AND SPECIAL BELLOWS BOOTS BELLOWS BOOTS FOR TRANSLATING SCREW JACKS BELLOWS BOOTS FOR ROTATING SCREW JACK
Bellows boots are available for all sizes and configurations of The end cuff is designed to fit standard end fittings, the top plate and Boots for upright rotating and inverted rotating jacks are ordered
ActionJac™ Worm Gear Screw Jacks. A boot protects the lifting the clevis end. When jack travel is greater than 6 inches, lift screw as separate line items. Typical rotating jack applications require two
shaft from contamination and helps retain lubricant to ensure long closed height increases to accommodate the length of the collapsed boots, one between the housing and the travel nut and one from
jack life. boot convolutions. For standard boots the increase in closed height the travel nut to the end of the lift shaft. Each boot for a rotating
is calculated using the formula shown. screw jack is ordered as a separate line item. To order boots for a
Standard boots are sewn from black neoprene-covered nylon fabric
for oil, water and weather resistance and are acceptable for use in rotating screw jack, select the outside diameter D from the chart on
D
-30° to +300°F environments. Optional materials are available for C the left and specify cuff dimensions and travel per the diagram using
specific operating conditions (see chart). W
the reference number as shown below. Installation arrangements
Increase in for rotating worm gear screw jacks vary, therefore boots for rotating
closed height =
Guides are recommended for all horizontal applications where travel jacks must be specified by the customer.
Bellows Boot Metal cover (travel – 6.0") x .1
TEMPERATURE COMMENTS
Standard boots are furnished with tie straps for jacks with greater
Hypalon-Coated Nylon -30° TO +300°F Chemical Resistance,
than 65 inches travel. Tie straps are attached from convolution to Wash Down Max.
JACK MODEL
convolution and help the boot extend uniformly. C D Screw Dia
Silicone Coated Fiberglass -67°F TO +550°F High Temperature Ball Screw Machine Screw Dia. Dia. W (ref.)
SPECIAL END CONFIGURATIONS Aluminum-Coated -65°F TO +700°F High Temperature, 0.5-BSJ All MJ 1.00* 4.00* 5.50 0.63
Fiberglass Hot Chips, Welding
Splatter 1-BSJ 1-MSJ 1.25 4.25 5.75 0.75
Metal cover Contact Nook Contact Nook 2, 2.5 & 3-BSJ 2, 2.5-MSJ 1.50 4.50 6.00 1.16
Engineering for Engineering for
5, 10-BSJ 5-MSJ 2.00 5.00 6.50 1.50 Typical rotating screw jack installations
details details
— 10-MSJ 2.50 5.50 7.00 2.00
Note: Retracted boot length may increase with some
— 15-MSJ 2.75 5.75 7.25 2.25
special materials. Y C
20-BSJ 20-MSJ 3.00 6.00 7.50 2.50
30-BSJ 30-MSJ 4.50 7.50 8.00 3.38
Square Flange Square — 35-MSJ 5.00 8.00 9.50 3.75
Max.
Cuff End Flange Travel
50,75,100-BSJ — 6.00 9.00 10.50 4.00 Extended
length T
Standard configuration
(with cuff both ends)
= 1.1 x T
— 50-MSJ 6.50 9.50 11.00 4.50
(d = D – 3")
— 75-MSJ 7.00 10.00 11.50 5.00
— 100-MSJ 8.00 11.00 12.50 6.00 Retracted
length = .1 x T
B D
HOW TO ORDER BOOTS FOR A TRANSLATING SCREW JACK
JACK ACCESSORIES
Boots may be ordered using the reference number system as shown
on pages 31, 69 103, 123, 141, and 161. EXAMPLE:
BB / 7.50 / 4.00 × 2.0 / 3.00 × 1.50 / 72.00 / G
For special material boots add “M” to the reference number and add Bellows Boot With Guides
the description. Outside Diameter (D) Max. Travel (T)
1st Cuff = B × X 2nd Cuff = C × Y
EXAMPLE:
5-MSJ-U 6:1 / SSE-1 / SSE-2 / FT / 36.0 / BGS
Nook worm gear screw jacks used in a steel press application. B = Standard Boot
G = with Optional Guide(s)
Many applications require longer lift shafts, or jacks that are Support Bearings, you can increase the effective speed of the lift
connected together with a common shaft that is a significant shaft or link shafting. BASE MOUNT RADIAL SUPPORT BEARING
distance apart. Resonance Frequency can cause the lift shaft or
link shaft to oscillate and whip, shortening the life of the lift shaft or There are two styles of Radial support Bearings; Flange Mount and
ITEM# DIA A B C E F G M N P Q
dislodge the link shafting from its coupling. Radial Support Bearings Base Mount. The Flange Mount allows for perpendicular mounting
with respect to the axis of rotation. The Base mount allow for in-line EZCP201-8 .50" 127 65 95 15 31 38 33.3 13 19 12.7
are used to provide radial support for the lift shaft on rotating style
screw jacks, as well as the link shafting products. By adding Radial mounting with respect to the axis or rotation. EZCP202-10 .625" 127 65 95 15 31 38 33.3 13 19 12.7
EZCP204 20mm 127 65 95 15 31 38 33.3 13 19 12.7
EZCP204-12 .75" 127 65 95 15 31 38 33.3 13 19 12.7
EZCP205 25mm 140 70 105 16 34 38 36.6 13 19 14.3
D
A EZCP205-16 1.00" 140 70 105 16 34 38 36.6 13 19 14.3
F
C EZCP206 30mm 165 83 121 18 38.1 48 42.9 17 21 15.9
Q
F
Q EZCP206-20 1.25" 165 83 121 18 38.1 48 42.9 17 21 15.9
L
EZCP208 40mm 184 100 137 19 49.2 54 49.2 17 21 19
EZCP208-24 1.50" 184 100 137 19 49.2 54 49.2 17 21 19
EZCP209 45mm 54 108 146 20 49.2 54 54 17 21 19
C A B
P N EZCP209-28 1.75" 54 108 146 20 49.2 54 54 17 21 19
P
M
EZCP210 50mm 206 114 159 22 51.6 60 57.2 20 25 19
E
EZCP212 60mm 241 138 184 25 65.1 70 69.8 20 25 25.4
JACK ACCESSORIES
EZCF208 40mm 130 102 51.2 49.2 36 15 16 19
EZCP209 EZCF209 20/20HL-BSJ EM-20-BSJ EM20-MSJ G3 EZCF208-24 1.50" 130 102 51.2 49.2 36 15 16 19
EZCP209-28 EZCF209-28 20-MSJ 20SS-MSJ EZCF209 45mm 137 105 52.2 49.2 38 16 16 19
EZCP210 EZCF210 LJT-50 EZCF209-28 1.75" 137 105 52.2 49.2 38 16 16 19
EZCP212 EZCF212 30/30HL-BSJ LJT-60 EZCF210 50mm 143 111 564.6 51.6 40 16 16 19
EZCP212-36 EZCF212-36 25SS-MSJ EZCF212 60mm 175 143 68.7 65.1 48 18 19 25.4
EZCP213-40 EZCF213-40 30-MSJ EZCF212-36 2.25" 175 143 68.7 65.1 48 18 19 25.4
EZCP215-48 EZCF215-48 35-MSJ EZCF213-40 2.50v 187 149 69.7 65.1 50 22 19 25.4
EZCF215-48 3.00" 200 159 78.5 77.8 56 22 19 33.3
JACK ACCESSORIES
BALL SCREW JACK LIFT SHAFT LUBRICANT
INSTALLATION 5) Rotate the worms to adjust the timing of the lift shafts as
ENGLISH TO METRIC METRIC TO ENGLISH
necessary to equally distribute the load. Assemble the load
Alignment of the jack (or jacks) directly affects service life. Jacks
mounting hardware and tighten.
must be properly aligned in all planes so that the main drive shaft Length Torque Length Torque
can be turned without evidence of binding. The following steps are 6) Cycle the jacks from closest to farthest point. For rotating jacks
1 ft = 304.8 mm 1 ft-lb = .001356 kN-m 1 mm = .00328 ft 1 kN-m = 737.3 ft-lb
suggested but may not always be applicable when installing jacks. It with a lift shaft bearing support, loosen the bearing support
is the responsibility of the end user to determine specific installation fasteners and re-tighten to ensure that the lift shaft is parallel 1 ft = .3048 m 1 ft-lb = 1.356 N-m 1 m = 3.28 ft 1 N-m = .737 ft-lb
procedures. to the guide system.
1 ft = .0003048 km 1 ft-lb = 135.6 N-cm 1 km = 3821 ft 1 N-cm = .00737 ft-lb
1) The mounting flange of the jack is a precision-machined Failure to do this could result in lift shaft stress fracture.
1 in = 25400 µm 1 ft-lb = 1356 N-mm 1 m = .0000394 in 1 N-mm = .000737 ft-lb
surface. The worm shaft and lift shaft bearing bores are
7) Cycle the jacks again and verify that no binding occurs.
machined in tight relationship to the mounting flange. 1 in = 25.4 mm 1 ft-lb = .1383 kgf-m 1 mm = .03937 in 1 kgf-m = 7.23 ft-lb
Check the lubrication levels, check the limit switch settings
Better mounting surfaces will make it easier to align the jack to 1 in = .0254 m 1 in-lb = .000113 kN-m 1 m = 39.37 in 1 kN-m = 8847.2 in-lb
(note: rotary limit switches are not factory set), check the
the load.
tightness of all fasteners and put the jacks in service. 1 in = .0000254 km 1 in-lb = .113 N-m 1 km = 39370 in 1N-m = 8.847 ft-lb
The surface(s) to which the jacks are mounted should be flat,
MAINTENANCE 1 in-lb = .01152 kgf-m 1 kgf-m = 86.8 in-lb
smooth and perpendicular to the guides. Note: for rotating
worm gear screw jacks, also ensure that the lift shaft is parallel ActionJac™ Worm Gear Screw Jacks require minimum maintenance.
to the guides. In addition to maintaining lubrication levels in the gearbox, the Weight/Force Weight/Force
following items should be checked: Lifting screws must be kept free 1 lb = .454 kg 1 kg = 2.205 lb
2) Start with the load temporarily supported in a position closest
of contaminants and should be lubricated. Refer to the lubrication
to the jack housing(s). Locate the jack by putting the jack in 1 lb = .454 kgf 1 kgf = 2.205 lb
section on page 212 for appropriate lubrications. If possible, screws
place with the fasteners loosely assembled.
should be booted or returned to retracted position when not in use. 1 lb = 4.45 N 1 N = .225 lb
3) Level the jacks if necessary. For some applications, a piece of
For Machine Screw Jacks, lash between the lift shaft and travel nut 1 lb = .00445 kN 1 kN = 224.8 lb
compliant material such as the rubber used for machine isolation
(or drive sleeve) greater than 1⁄4 the screw pitch indicates the need
bases will help compensate for potential misalignment.
for replacement of the jack lift shaft drive components. Speed Speed
4) Check the level of the load, then, actuate the jacks bringing
For Ball Screw Jacks, the ball screw should be checked periodically 1 ft/sec = .3048 m/sec 1 m/sec = 3.28 ft/sec
the lift shaft or travel nut nearly in contact with the load. Adjust
for spalling of the raceway. In normal operation, ball screw lash does
the position of the jacks so that the jack attachment points 1 in/sec = .0254 m/sec 1 m/sec = 39.37 in/sec
not change significantly over the life of the ball screw.
are centered on the load mounting points. Tighten the jack
mounting screws. If a compliant material is installed, make For all jacks, check the backlash between the worm and worm gear.
sure that the fasteners do not compress the material and that Lash in excess of 30° for ratios 5:1 to 8:1 and 60° for ratios 20:1 and
there is clearance around the fasteners. 32:1 indicates the need to replace the worm and worm gear.
Nook worm gear screw jacks are used widely in the manufacturing industry.
4950 East 49th Street | Cleveland, OH 44125-1016 USA | 216.271.7900 | toll-free: 800.321.7800 | f: 216.271.7020 | email: nook@nookind.com