Professional Documents
Culture Documents
Procedure:
__ 1. Switch power OFF and disconnect the power
cord.
__ 2. Remove SPDH assembly, REP 5.18. Place it
on a secure surface.
Kit part #: 655N00595 Instruction #: N/A Date: August 2018 Page: 2 of 2
__ 7. Remove the template and turn the SPDH __ 9. Secure the Retaining Brackets in place by
over with only the Counterbalance area just tightening the four Locknuts using a 5.5mm
beyond the edge of the surface. This will deep socket or open end wrench.
allow needed access from underneath.