BUILDING DRAWING
This paper has TWO sections: Working Drawing, and Sketch and Design OR 3D Solid Model
Design Drawing.
Answer ONE question from Working Drawing, and ONE sstion from Sketch and Design OR
om ign
3D Solid Model Design Drawing. an ™ mm
Sani MAY use EITHER the Traditional Drawing Method OR the Computer-Aided Drafting
lethod.
Di
Worl jin
Answer ONE question from this section.
Do NOT spend more than 2 hours on this question.
1 ‘The outline of a floor plan for a three-bedroom residence is shown in Figure 1, on the enclosed
sheet. The building is to be covered with a gable roof as shown in the drawing.
(a) Draw toa scale of 1:50, the FULL SECTIONAL DRAWING A-A to include:
(Foundation details
Gi) Floor construction
Gi) Wall details
(iv) Roof details
(v) Atleast THREE vertical dimensions
Show clearly ALL sectional details.
(b) Draw, to a scale of 1:20, the sectional wall detai] at “B” to show the foundation to roof
detail and to include the window detail. The eave is of open construction.
Show clearly ALL construction details.
Label all main construction members.
Print a suitable title and scale used at the base of EACH drawing.
Dimensions not given are left to the candidate’s discretion.
Specifications:
Doors: External — flush door, 900 wide x 2000 high
Internal ~ flush door, 750 wide x 2000 high
Windows: W, - Awning type, 1200 wide x 1200 high
W, - Glass louvres, 600 wide x 600 high
Walls: External ~ concrete blocks - 150 mm thick with 10 mm plaster on both
sides
Internal — concrete blocks — 100 mm thick with 10 mm plaster on both
sides
Foundation: Reinforced concrete, continuous strip footing, 200 mm thick x 600 mm
wide
Roof: Gable roof with 450 mm overhangCARIBBEAN EXAMINATIONS COUNCIL
SECONDARY EDUCATION CERTIFICATE
EXAMINATION
TECHNICAL DRAWING
OPTION - BUILDING DRAWING
Paper 03/1 — General Proficiency
PRACTICAL
3950 457s 3000 3200
ROOF OUTLINE
we
9750
DINING ROOM
|
|
|
!
MASTER MASTER ||
BEDROOM BaTH ||
|
|
!
|
|
4575
8525 6200
14725
DRAWING NOT TO SCALE
Figure 1 - FLOOR PLANFloor:
-3-
100 mm thick concrete reinforced slabs
20 mm thick sand/cement screed
50 mm sand blinding
150 mm thick hardcore
Height of finished floor to top of ring beam - 2800 mm.
(80 marks)
2 The outline of a floor plan for a residence, consisting of three bedrooms, two bathrooms, living
room, dining room, kitchen and a porch is shown in Figure 1, on the enclosed sheet.
@)
@)
Draw to a scale of 1:50, the completed floor plan to show:
Wall thicknesses
(i) All doors and windows
(ii) Kitchen appliances and base cupboards
(iv) Bathroom fixtures
(v) Names of all rooms
(vi) 10 main external dimensions
(vii) 2 overall dimensions
‘The foundation for the building consists of simple strip footings beneath the foundation
wall. Draw, to a scale of 1:50 and in accordance with standard drawing practice, the
foundation plan for the building. Label and dimension foundation and footings.
Show clearly ALL construction details. Print a suitable title and scale used at the base of.
EACH drawing.
Dimensions not given are left to the candidate’s discretion.
Specifications:
Doors: External — flush door, 900 wide x 2000 high
Internal — flush door, 750 wide x 2000 high
Windows: W, - Awning type, 1200 wide x 1200 high
W, — Glass louvres, 600 wide x 600 high
Walls: External — concrete blocks, 150 mm thick with 10 mm plaster on both
eal concrete blocks, 100 mm thick with 10mm plaster on both sides
Foundation: Reinforced concrete, continuous strip footing, 200 mm thick x 600 mm
wide .
Foundation wall 200 x 200 x 400 mm, foundation block filled with
concrete.
(80 marks)y “
Sketch and Design OR 3D Solid Model Design Drawing
Answer ONE question from this section.
3. Make a neat, well proportioned sketch to show the sectional view of a reinforced concrete, straight
flight external stair. Include hatching to show material representation and show ALL steel
reinforcement. Label ALL main components of the stair. (20 marks)
4.
Draw a neat, well proportioned, 3 dimensional pictorial sketch to illustrate an elevation of a
casement window. Label ALL members clearly.
(20 marks)
END OF TEST