Professional Documents
Culture Documents
The electrical and dimensional properties of this product are measured by the
Technical and Quality Assurance department at the Eland Cables laboratory. Cable
CONSTRUCTION performance in respect of conductor resistance, construction quality (workmanship),
dimensional consistency, and other parameters are verified to published standards
Drawing Number
and approved product drawings. Conformance to RoHS (Restriction of the use of
148/057/A4 Hazardous Substances) is determined and confirmed.
Material
Hard drawn copper
DIMENSIONS
ELAND NETWORK NOMINAL MINIMUM MINIMUM MINIMUM MINIMUM MINIMUM MAXIMUM MAXIMUM WEIGHT
PART NO. RAIL PART CROSS TENSILE BREAKING ELONGATION ELECTRICAL SPECIFIC RESISTIVITY ELECTRICAL kg/km
NO. / PADS SECTIONAL STRENGTH LOAD FM AT BREAK A200 CONDUCTIVITY CONDUCTIVITY AT 20ºC RESISTANCE R
AREA RM kN % AT 20ºC x μohms*mm2 ohms/km
mm2 N/mm2 m/ohms*mm2 %IACS
The information contained within this datasheet is for guidance only and is subject to change without notice or liability. All the information is provided in good faith and is believed to be correct at the time of
publication. When selecting cable accessories, please note that actual cable dimensions may vary due to manufacturing tolerances.