Professional Documents
Culture Documents
78d12ag TN3 R
78d12ag TN3 R
, LTD
78DXXA LINEAR INTEGRATED CIRCUIT
3-TERMINALS 1A POSITIVE
VOLTAGE REGULATOR 1
TO-252
DESCRIPTION
The UTC 78DXXA family is monolithic fixed voltage regulator 1
integrated circuit. They are suitable for applications that required
TO-252-3
supply current up to 1 A.
FEATURES
1
* Peak output current up to 1A. SOT-223
* Fixed output voltage of 5V, 6V, 7V, 8V, 9V, 10V, 12V, 15V and
18V available.
* Thermal overload shutdown protection.
* Short circuit current limiting. 1
* Output transistor SOA protection. TO-251
IIIC.CC
ORDERING INFORMATION
Lead Free
78DXXAL-AA3-R
78DXXAL-TM3-T
78DXXAL-TN3-R
78DXXAL-TN3-T
78DXXAL-TNA-R
78DXXAL-TNA-T
Ordering Number
SOT-223
TO-251
TO-252
TO-252
TO-252-3
TO-252-3
Pin Assignment
1
I
I
I
I
I
I
G
G
G
G
G
G
2 3
O
O
O
O
O
O
Packing
Tape Reel
Tube
Tape Reel
Tube
Tape Reel
Tube
www.unisonic.com.tw 1 of 9
Copyright © 2013 Unisonic Technologies Co., Ltd QW-R101-010,P
78DXXA LINEAR INTEGRATED CIRCUIT
MARKING INFORMATION
PACKAGE VOLTAGE CODE MARKING
SOT-223 05: 5V
06: 6V
08: 8V
09: 9V
10: 10V
12: 12V
TO-251 15: 15V
TO-252 18: 18V
TO-252-3
INPUT
1
Z2
R13 R17 R9 T12
T14
T10 T8 T9
R19
R18
R12
R14 T13
T11
OUTPUT
T5 R11 R10
3
T6
R8
R15 R5
T4
Z1
T15
R4
R6
T7
R7
R1 R2 C1
R16
T3
T1 T2
R3 GND
2
APPLICATION CIRCUIT
Note: Bypass capacitors are recommended for optimum stability and transient response and should be located
as close as possible to the regulators.
ELECTRICAL CHARACTERISTICS
(TJ=25°C, CI =0.33uF, CO=0.1uF, PD≤15W, unless otherwise specified)
For 78D05A (VIN =10V, IOUT =0.5A)
PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT
IOUT =5mA~1.0A 4.80 5.0 5.20 V
Output Voltage VOUT
VIN =7.5~20V, IOUT =5mA~1.0A 4.75 5.25 V
IOUT =5mA~1.0A 50 mV
Load Regulation ΔVOUT
IOUT =0.25A~0.75A 25 mV
VIN =7~25V 50 mV
Line Regulation ΔVOUT
VIN =7.5~20V, IOUT =1.0A 50 mV
Quiescent Current IQ IOUT≤1.0A 8.0 mA
VIN =7.5~20V 1.0 mA
Quiescent Current Change ΔIQ
IOUT =5mA~1.0A 0.5 mA
Output Noise Voltage eN 10Hz≤f≤100kHz 40 μV
Temperature coefficient of VOUT ΔVOUT/ΔT IOUT =5mA -0.6 mV/°C
Ripple Rejection RR VIN =8~18V,f=120Hz 62 80 dB
Peak Output Current IPEAK 1.8 A
Short-Circuit Current ISC VIN =35V 250 mA
Dropout Voltage VD 2.0 V
Output Voltage vs. Input Voltage Circuit Operating Current vs. Input Voltage
6 6 V =5V
VOUT=5V OUT
1 1
0 0
0 1 2 3 4 5 6 7 8 0 1 2 3 4 5 6 7 8
Input Voltage, VIN (V) Input Voltage, VIN (V)
Bias Current vs. Junction Temperature Output Voltage vs. Junction Temperature
6 5.5
5.4 VIN=10V
5 IOUT=5.0mA
Output Voltage, VOUT (V)
5.3
Bias Current, IB (mA)
5.2
4
VIN=10V 5.1
IOUT=0A
3 5.0
4.9
2
4.8
4.7
1
4.6
0 4.5
-25 -5 15 35 55 75 95 115 135 155 -25 -5 15 35 55 75 95 115 135 155
Junction Temperature, TJ (°C) Junction Temperature, TJ (°C)
Dropout Voltage, VD (V)
Output Voltage
Deviation (mV)
Output Voltage
Deviation (mV)
Input Voltage
Change (V)
Load Current
(mA)
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.