MINETEK
Coy
Axial Fan solution at
Tritton Mine
Woe RMU MRSC oaAxial Fan solution
at Tritton Mine
Business Challenge
Aeris Resources has continu
of up to 1,500 mete
jacated near the town of Nyngan in ce
tion from both the Tritton Mir
@ hens
Client
site
Location
Product
‘Application
Scope
Commenced
Completed
|
Tritton ¢
New South Wales, Aust
Fan and electrical component
(19
We didn't think one fan could
ventilate 1,000m underground.
We were preparing for multiple
shutdowns and fan installs.
Tritton Mine
IMAGE: np
TRITTON UNDERGROUND
operationsWhy Minetek was the
obvious solution
th the
Execution
Controlling the fan from the
surface saves us time
planning, operational costs
and wasted power. We can
regulate the fan, see the
operation status all from the
shift boss' desk.
riton Mine
Speed
Choosing MinetekChoosing Minetek Air
The challenging conditions drove several essential requirements
for the ventilation system.
The solution needed to meet the required duty p
diameter and number of fans required also ha
be challenging to install and come with higher
sage, Installing many fans would inter
fo be installed at
ints for ar flow and pressure.
to be considered, as larger fans would
sts during install and ongoing power
‘operations and include muttigle shutdowns
1s boosters would n decline extended
08 that Minetek could offer
Variable power, p ‘and performance withaut the need for VSD,
the surface of the mine, and the integration into the existing software system wore all
elements considered in the decision-making process
Tritton Mine had intial concerns that a single Minetek fan would not be able to me
requirements, as larger or mul 1s WOuld traditionally be used for ofthis
length and depth,
Minetek provided technical data that g the solution would be able to meet the
projects needs
A single fan installation
allowed us to progress
quicker and have the
available power when
we needed it.
Triton Mine
Minetek was able to reduce
power consumption by
% iohoveraen sustainable use of poser 5 5 of,
"2 Save through smart 2
power us
Business drivers delivered
trol saves on
Comparison: Minetek fan as utilized at an
@ of 65% of total installed powe
of operat
Days, comparing to 2 x twin 110k
9 Reduction in reentry
timeOther Projects
Cadia, NSW, Australia
Given:
Nowerest Cadia mine approached Minetek to provide a fan
suitable for extracting dust caused by the dumping and crushing
process underground. Minetek provided a custom ventilation
solution for this underground crusher
Challenge:
The high abr
through the ventilat
incumbent vane axial ventilation fans.
by the airborne dust
rapid degradation of the
fans have cause:
With the current standard operation, the 110kW Single-stage Axial
Fans in use have an operating life sp weeks, until the
ler has degraded and wom too significantly to be operably
effective.
Solution and results:
Minetek proposed a 20kW High Output (HO) axial flow fan as @
tion, to provide both the required duty and
longevity of performance and operation.
more suitabl
‘The fans wer
months.
The Minetek fan was estimated to last almost 7 times longer than
the standard fan, with the robust steel impeller design able to
withstand even the toughest environments without loss of
performance. The mine site ordered five Minetek fans in total at the
smpletion of this trial
tested in a side-by-side comparison for three
Goldfields, WA, Australia
Given:
The customer aimed to increase production and expand
exploration. Debottlenecking the existing primary ventilation circuit
{10 achieve their
Challenge:
Minetek
size and technology combination not seen before in Australia, The
full scope also included the removal of redundant equipment and
installation of the new fans.
commissioned to develop a primary booster fan of a
Solution and results:
Minetek staff worked around the clock to ensure proje
were achieved within the tight timeframe, and managed to remove
the old equipment, install the new fans and commission them in
four days.
Due to their size, for the fans to be tested prior to shipping,
approval had to be granted from the Power Supply Authorities, and
all other fact to be shutdown to
provide enough poy
hi
in the Minetek compl
Not only have we designed a fan
that outperforms the existing Axial
Fan, but we have also supplied one
that is quieter and smaller, with a
unique design that allows the dust
to travel through the equipment with
minimal impact to the structure.
jeremy Sutherland, Minetek Air
Key features of the
fans:
POD: "Performance on Demand” vane inlet
Controls to adjust vent flow a
nd power
49 Impulse bladed impeller equipment with an
yhamiber to ensure optimum fan
performan
—1100KWW/1000V in
run off the renewable power station).
42 1280rr#/sec @ 3700Pa for
production needs with
ability of
mélsec @ 4200KPa,