Professional Documents
Culture Documents
TMSU 1 is an easy to use instrument for The handset has one output for
the detection of leaks in compressed air connecting the headset. The headset is
systems, pneumatics brake systems, an approved ear defender that
vacuum systems, pressurized gas represents the best technology available
storage, and steam traps. It works like a for this kind of instrument.
microphone, but is sensitive only to high
frequency ultrasound. The sensor Application
transforms then the ultrasound into an The TMSU 1 is suitable for detecting,
audible frequency that can be heard tracing and diagnosing the source of all
through the headphones. kinds of leaks, such as compressed air,
Leaks are caused by fluid flowing from a gases, steam and vacuum systems. It
high pressure environment to a low can also be used to verify the correct
pressure environment, creating operation of steam traps.
turbulence. The turbulence generates
high frequency sounds (so called
Note:
ultrasound) that can be detected by
The TMSU 1 is not ATEX approved.
TMSU 1. The sensitive piezoelectric
crystal in the sensor allows the end user
to quickly guide the instrument to the
loudest point which helps locate the leak
location.
Technical data
Designation TMSU 1
Usage time ± 20 hours. This varies based on: including the charge
of the battery in the detector, the level of amplification
used and the quality of the batteries
Spare parts
Designation Description