Professional Documents
Culture Documents
STEEL SHEET
East Japan Works (Chiba)
Characteristics
thickness from 1.2mm to 25.4mm and widths from 600mm to 2,300mm, which is the world’s
widest hot rolled strip. Advanced production technologies ensure high dimensional accuracy.
1
Manufacturing process
���������������
Chiba No.3 continuous hot strip mill ������
������ ��������������
����������
��������
������������������
����
�������������
Manufacturing process
Manufacturing process
���������
Chiba No.3 continuous hot strip mill
���������������
���������������
�����������������
������������ ���������
Fukuyama No.1 mill realizes the world highest cooling speed by “Super -OLAC H”
Super -OLAC H at Fukuyama realizes the theoretically marginal world’s highest cooling speed
(700°C/sec at 3mm thickness) and uniform cooling over the strip surface. The new facility features high
accuracy cooling rate control and improves uniformity of material quality such as high strength, high
toughness, stable weldability and formability.
“Super -OLAC H” is an abbreviation of Super On-L ine A ccelerated C ooling for H ot Strip Mill.
“Super -OLAC H” in Fukuyama No.1 continuous hot strip mill
2 3
Products, characteristics and application
JFE produces various kinds of products based on the public standards (Japanese Industrial Standard, The Japan
Iron and Steel Federation Standard, foreign standards and ship’s classification standards) and JFE standard.
● Public Standard
Japanese Industrial Standard (JIS)
G3116 SG
gas cylinders 500 l for LPG, acetylene and propane gases.
G4401 Carbon tool steels SK Carbon tools steel made by hot rolling and forging.
G4404 Alloy tool steels SKS Alloy tools steel made by hot rolling and forging.
C2555 Steel sheets and strip for pole core PCYH For magnetic pole of rotating electric machine.
4
Foreign Standards Ship's Class Standard
Classification JFE Steel produces the products based on
ASTM Standard following society’s standards.
BS Standard Society
DIN Standard NK, ABS, BV, CR, LR, DNV
EN Standard
ISO Standard
SAE Standard
API Standard
● JFE Standard
Classification Designation Page Characteristics and Application
Hot rolled steel sheets Quality with wide range of formability. Various types of hot rolled steels are
JFE-HA 6
for automobile use available.
Hot rolled steel sheets JFE-HDN Because of good formability same as cold rolled one, press formability is
with good press JFE-HEN 8 improved. Low carbon steel is suitable to extra deep drawing parts like
formability JFE-HFN compressor chambers.
Hot rolled anti-sea
High corrosion resistance against seawater splashes. It is applicable to port
water corrosion steel JFE-MARIN 9
facilities, quays, off shore structures.
sheets
Hot rolled corrosion High corrosion resistance to sulfuric or hydrochloric acid. It is suitable to
Hot rolled checkered With simple and beautiful stripe patterns , it has good anti-slip and good water-cut
JFE-HCP 14
plate property with good weldability and formability.
Hot rolled steel sheets
for electric resistance JFE-HP 16 By specifying finer strength levels than JIS, it is suitable to various application.
welded pipe and tube
Hot rolled
Having superior atmospheric corrosion resistance and corrosion resistance, it has
atmospheric corrosion
JFE-HCUP 17 also sufficient strength, weldability and formability for structural uses. Stabilized
resistance steel
rust after two years has no progress. It is applied to exposed parts of buildings.
sheets
5
JFE Standard (1)
● Dimension tolerance JIS G 3131 for thickness and JIS G 3193 for width are applied.
● Available product size range Available product size comes to negotiation.
Hot rolled sheets for automobile use JFE-HA
Reference: 1. The values in parentheses are reference values.
JFE prepares various kinds of hot rolled high strength steels for automobile use with the general process- 2. BHT means the increase in tensile strength during the baking process.
ing quality to the quality having same formability as those of cold rolled sheets. 3. The YR means the ratio of the yield point to the tensile strength.
4. Rolling or Transverse in the column of Testing Direction indicates test piece taken for the tensile test
in the rolling direction or transverse to the rolling direction.
● Mechanical Properties 5. The bend test is available depending on a demand.
Tensile Test
Hole
Applied Thickness longation (%) min Expanding
Tensile
Classification Designation mm Yield Point Thickness mm Ratio Other Specification
Strength Testing
(min.-max.) min. Test Piece %
min. 1.2 ≦ 1.6 ≦ 2.0 ≦ 2.5 ≦ 3.2 ≦ 4.0 ≦ 6.3 ≦ 8.0 ≦ Direction
(N/mm2) min.
(N/mm2) < 1.6 < 2.0 < 2.5 < 3.2 < 4.0 < 6.3 < 8.0 ≦ 14.0
440 1.2-14.0 255 440 28 29 30 32 33 34 35 35 Rolling ̶
Commercial
JFE-HA… 490 1.4-14.0 305 490 (24) 25 26 26 27 27 28 28 JIS No.5 Transverse ̶
quality
540 1.4-14.0 345 540 (21) 22 23 23 24 24 25 25 Transverse ̶
440 1.2-14.0 305 440 25 26 27 27 28 28 29 29 Rolling ̶
490 1.4-14.0 345 490 (21) 22 23 23 24 24 25 25 Transverse ̶
High yield ratio type 540 1.4-14.0 400 540 (18) 19 20 20 21 21 22 22 Transverse ̶
JFE-HA…R JIS No.5
(HSLA) 590 1.4-14.0 430 590 (16) 17 18 18 19 19 20 20 Transverse ̶
690 1.4-14.0 585 690 (14) 14 15 16 17 17 18 19 Transverse ̶
780 1.4-14.0 665 780 (13) (13) 14 14 15 15 16 17 Transverse ̶
540 1.4-6.0 (YR ≦ 75%) 540 23 24 25 25 26 26 ̶ ̶ Transverse ̶
Low yield ratio type
JFE-HA…D 590 1.4-6.0 (YR ≦ 75%) 590 21 22 23 23 24 24 ̶ ̶ JIS No.5 Transverse ̶
(DP)
780 2.0-4.0 (YR ≦ 75%) 780 ̶ ̶ 16 16 17 17 ̶ ̶ Transverse ̶
440 1.4-6.0 305 440 28 29 30 32 33 34 ̶ ̶ Rolling 80
Excellent stretch flange 490 1.4-6.0 325 490 21 22 23 24 25 25 ̶ ̶ Transverse 60
formability type A JFE-HA…SA JIS No.5
( Equivalent JFS A )
540 1.4-6.0 345 540 21 22 23 23 24 24 ̶ ̶ Transverse 60
JFE Standard
JFE Standard
590 1.4-6.0 400 590 18 19 20 21 22 22 ̶ ̶ Transverse 55
440 1.4-6.0 305 440 28 29 30 32 33 34 ̶ ̶ Rolling 100
Excellent stretch flange 490 1.4-6.0 325 490 21 22 23 24 25 25 ̶ ̶ Transverse 80
formability type B JFE-HA…SB JIS No.5
( Equivalent JFS B )
540 1.4-6.0 345 540 21 22 23 23 24 24 ̶ ̶ Transverse 80
590 1.4-6.0 400 590 18 19 20 21 22 22 ̶ ̶ Transverse 75
High elongation type
JFE-HA…E 590 1.8-3.2 390 590 ̶ 25 26 27 28 ̶ ̶ ̶ JIS No.5 Transverse ̶
(Retained austenite)
440 1.6-6.0 305 440 ̶ 29 30 32 33 33 ̶ ̶ Rolling ̶
490 2.0-6.0 325 490 ̶ 22 23 24 25 25 ̶ ̶ Transverse ̶
High corrosion
JFE-HA…C 540 2.0-4.0 355 540 ̶ 21 22 23 24 24 ̶ ̶ JIS No.5 Transverse ̶
resistance type
590 2.0-4.0 420 590 ̶ 19 20 21 22 22 ̶ ̶ Transverse ̶
780 2.0-4.0 ̶ 780 ̶ ̶ 14 14 15 15 ̶ ̶ Transverse ̶
440 1.6-6.0 305 440 ̶ 29 30 32 33 33 ̶ ̶ Rolling 80
High corrosion resistance 490 2.0-6.0 325 490 ̶ ̶ 23 24 25 25 ̶ ̶ Transverse 60
type with excellent stretch JFE-HA…CS 540 2.0-4.0 355 540 ̶ ̶ 22 23 24 24 ̶ ̶ JIS No.5 Transverse 60
flange formability 590 2.0-4.0 420 590 ̶ ̶ 20 21 22 22 ̶ ̶ Transverse 55
780 2.0-4.0 ̶ 780 ̶ ̶ 14 14 15 15 ̶ ̶ Transverse 45
Extra stretch flange
formability type JFE-HA…NANO 780 1.4-4.5 685 780 14 14 15 15 16 16 ̶ ̶ JIS No.5 Transverse 60
NANOHITEN ™
High fatigue strength type JFE-HA…H 780 2.3-6.0 500 780 ̶ ̶ 16 16 17 17 ̶ ̶ JIS No.5 Transverse ̶
370 1.2-4.5 205 370 33 34 35 35 36 37 ̶ ̶ Rolling ̶ 10%Pre-StrainBHT ≧ 40MPa
Bake hardenability type 440 1.2-4.5 265 440 28 29 30 32 33 34 ̶ ̶ Rolling ̶ 10%Pre-StrainBHT ≧ 40MPa
JFE-HA…BHT JIS No.5
(TS Increase) 490 1.4-4.5 315 490 24 25 26 26 27 27 ̶ ̶ Transverse ̶ 10%Pre-StrainBHT ≧ 40MPa
590 1.4-4.5 400 590 16 17 18 18 19 19 ̶ ̶ Transverse ̶ 10%Pre-StrainBHT ≧ 40MPa
6 7
JFE Standard (2)
● Characteristics
Classification Designation Reference
● Mechanical Properties
Tensile Test
Applied
Thickness Yield Tensile Elongation min. (%)
Designation mm Point Strength
Thickness mm
min. min.
(min.-max.) 1.2 ≦ 1.6 ≦ 2.0 ≦ 2.5 ≦ 3.2 ≦ 4.0 ≦ 6.3 ≦ 8.0 ≦
(N/mm2) (N/mm2) < 1.6 < 2.0 < 2.5 < 3.2 < 4.0 < 6.3 < 8.0 ≦ 14.0
Reference JIS No.5 test piece for the tensile test taken to the rolling direction.
● Dimension tolerance
JIS G 3131 for thickness and JIS G 3193 for width are applied.
8
Hot rolled anti-sea water corrosion steel sheets JFE-MARIN
JFE-MARIN offers superior weldability and toughness as a structural material for welding, combined with
excellent corrosion resistance. The synergistic effects of alloying elements provide corrosion resistance not
only in sea water, but also at the splash line, which is most susceptible to seawater corrosion. Suitable for
port and harbor facilities, quays, and offshore structures.
JFE Standard
● Chemical Composition
Chemical Composition (wt%)
Designation
C Si Mn P S Cu Ni Cr Nb Sol.Al
0.15 0.55 1.50 0.030 0.030 0.20 0.40 0.50 0.10 0.15
JFE-MARIN
Max Max Max Max Max ∼ 0.50 Max ∼ 0.80 Max ∼ 0.55
● Mechanical Properties
Tensile Test
Applied Thickness
Designation mm Yield Point min. Tensile Strength Elongation min.
(min.-max.) Test Piece
(N/mm2) min. (N/mm2) (%)
● Dimension tolerance
JIS G 3193 is applied.
9
JFE Standard (3)
● Chemical Composition
Chemical Composition (wt%)
Designation
C Si Mn P S Cu Ni Cr Mo Sb Sn
0.14 0.55 0.30 0.030 0.020 0.25 0.50 0.05 0.10
JFE-ASA400D ̶ ̶
max. max. - 0.70 max. max. - 0.50 max. - 0.20 max.
0.14 0.55 0.30 0.030 0.020 0.25 0.50 0.50 0.10
JFE-ASA400H ̶ ̶
max. max. - 0.70 max. max. - 0.50 max. - 1.00 max.
0.14 0.55 0.30 0.030 0.020 0.25 0.50 0.50 0.10 0.05 0.10
JFE-ASA400W
max. max. - 0.70 max. max. - 0.50 max. - 1.00 max. - 0.20 max.
0.17 0.55 0.30 0.030 0.020 0.25 0.50 0.05 0.10
JFE-ASA440D ̶ ̶
max. max. - 0.70 max. max. - 0.50 max. - 0.20 max.
0.17 0.55 0.30 0.030 0.020 0.25 0.50 0.50 0.10
JFE-ASA440H ̶ ̶
max. max. - 0.70 max. max. - 0.50 max. - 1.00 max.
0.17 0.55 0.30 0.030 0.020 0.25 0.50 0.50 0.10 0.05 0.10
JFE-ASA440W
max. max. - 0.70 max. max. - 0.50 max. - 1.00 max. - 0.20 max.
● Mechanical Properties
Tensile Test
Applied Elongation min. (%) Test Piece
Thickness Tensile
Designation Yield Point
mm Strength Thickness mm Thickness mm Testing
min.
(min.-max.) min. Direction
(N/mm2) 5< 5<
(N/mm2) ≦5 ≦5
JFE Standard
≦ 16 ≦ 16
● Dimension tolerance
JIS G 3193 is applied.
● Available product size range
Available product size comes to negotiation.
● Chemical Composition and applied environment of D, H, W type
Designation Chemicals Applied environment
Resistance against sulfuric acid corrosion is less than that of JFE-ASA ・・・ D. Considered on
JFE-ASA…H Cr-Cu-Ni
the strength in comparatively high temperature atmosphere.
10
Hot rolled steel sheets for high temperature atmosphere JFE-HHCR
Hot rolled steel sheets for high temperature atmosphere have good formability at room temperature,
combined with high temperature oxidation resistance and heat resistance at temperatures of 450-600°C.
Suitable for applications which require heat resistance and formability, such as boiler skin casings,
chimneys, and ducts.
● Chemical Composition
Chemical Composition (wt%)
Designation
C Si Mn P S
● Mechanical Properties
Tensile Test
Applied Thickness
Tensile Elon-gation
Designation mm Yield Point Testing
Strength min. Test Piece
(min.-max.) (N/mm2) Direction
(N/mm2) (%)
Rolling
JFE-HHCR 1.2-12.7 ̶ 330 ∼ 430 37 JIS No.5
direction
● Dimension tolerance
JIS G 3193 is applied.
JFE Standard
● Available product size range
Available product size comes to negotiation.
● Dimension tolerance
JIS G 3193 is applied.
● Flatness tolerance
The half of the value in Table 9 of JIS G 3193 is the aiming of flatness.
Details come to negotiation.
● Available product size range
Available product size comes to negotiation.
11
JFE Standard (4)
● Characteristics
1. Superior anti-fish tail property
2. Good adhesionability
3. Less distortion and residual strain during baking
4. Superior formability
5. Superior weldability
● Chemical Composition
Applied Thickness Chemical Composition (wt%)
Designation mm
(min.-max.) C Si Mn P S Others
JFE-HPE 1.2 - 13.0 0.10 max. 0.10 max. 0.70 max. 0.035 max. 0.035 max. Special additives
● Dimension tolerance
JIS G 3131 is applied
Designation C Si Mn P S SolAl Ti
12
Hot rolled high strength steel sheets JFE-HITEN
Used as-rolled in applications which require high strength with specified tensile strength levels.
Also has superior formability and weldability. High strength contributes to weight reduction.
● Chemical Composition
Chemical Composition (wt%)
Designation
C Si Mn P S
JFE-HITEN490 0.18 max. 0.50 max. 1.50 max. 0.035 max. 0.035 max.
JFE-HITEN540 0.20 max. 0.50 max. 1.60 max 0.035 max. 0.035 max.
JFE-HITEN590 0.20 max. 0.50 max. 1.60 max 0.035 max. 0.035 max.
JFE-HITEN690 0.20 max. 0.60 max. 2.00 max. 0.030 max. 0.015 max.
JFE-HITEN780 0.20 max. 0.60 max. 2.00 max. 0.020 max. 0.010 max.
● Mechanical Properties
Tensile Test
Applied
Thickness Elongation (%) min.
Tensile
Designation mm Yield Point
Strength Thickness mm
min.
min.
(min.-max.) (N/mm2) 1.6 ≦ 2.3 ≦ 3.0 ≦ 6.3 ≦ 8.0<
(N/mm2)
< 2.3 < 3.0 < 6.3 ≦ 8.0 ≦ 10.0
JFE Standard
JFE-HITEN490 305 490 22 22 24 25 25
1.6-10.0
JFE-HITEN540 345 540 20 20 22 23 23
Refernce : 1. JIS No.5 test piece for the tensile test taken transverse to the rolling direction.
2. JIS No.3 test piece for the bend test taken transverse to the rolling direction.
3. The bend test is available depending on a demand.
● Dimension tolerance
JIS G 3193 is applied.
13
JFE Standard (5)
● Mechanical Properties
Tensile Test
Applied
Elongation
Thckness Tensile Test Piece
Yield Point min. (%)
Designation mm Strength Testing
min. Thickness mm Thickness mm
min. Direction
(min.-max.) (N/mm2) 5< 5<
(N/mm2) ≦5 ≦5
≦ 13 ≦ 13
JFE-HCP-1 ̶ ̶ ̶ ̶ ̶ ̶ ̶
JFE-HCP-3 ̶ ̶ ̶ ̶ ̶ ̶ ̶
2.3-13.0
JFE Standard
3.2 26.48 44.3 78.7 123 443 26.83 44.9 79.7 125 ̶
4.5 36.69 61.3 109 170 613 37.04 61.9 110 172 619
6 48.46 81.0 144 225 810 48.81 81.6 145 227 816
8 64.16 107 191 298 1,073 64.51 108 192 300 1,079
9 72.01 120 214 334 1,204 72.36 121 215 336 1,210
12 95.56 160 284 444 1,598 95.91 160 285 446 1,604
14
Single-striped surface pattern Triple-striped surface pattern
of JFE-HCP-1 and JFE-HCP400-1 of JFE-HCP-3 and JFE-HCP400-3
�� ��� �� �
���
���
�
��
�
����
��
��
�
�
��
����
��
�
�� �� �� ���� ����
● Dimension tolerance
JIS G 3193 is applied.
JFE Standard
����
����
������� ��������
������� ��������
����
���������������(��)
����
��� ���������������
���
���
�������
��� ������ ������� �������
���
� ��� ���� ���� ���� ����
�����������(��)
15
JFE Standard (6)
Hot rolled steel sheets for electric resistance welded pipe and tube JFE-HP
By specifying finer strength levels than JIS, it is suitable to various applications.
● Chemical Composition
Chemical Composition (wt%)
Designation
C Si Mn P S Al total
JFE-HP290 0.10 max. 0.35 max. 0.50 max. 0.035 max. 0.035 max. ̶
JFE-HP320 0.18 max. 0.35 max. 0.60 max. 0.035 max. 0.035 max. ̶
JFE-HP340 0.18 max. 0.35 max. 0.60 max. 0.035 max. 0.035 max. ̶
JFE-HP370 0.25 max. 0.35 max. 0.30 - 0.90 0.035 max. 0.035 max. ̶
JFE-HP410 0.25 max. 0.35 max. 0.30 - 0.90 0.035 max. 0.035 max. ̶
JFE-HP440 0.30 max. 0.35 max. 0.30 - 1.00 0.035 max. 0.035 max. ̶
JFE-HP490 0.30 max. 0.35 max. 0.30 - 1.00 0.035 max. 0.035 max. ̶
JFE-HP540 0.23 max. 0.35 max. 1.50 max. 0.035 max. 0.035 max. 0.080 max.
● Mechanical Properties
Tensile Test
Applied Elongation min. (%)
Thickness Yield Tensile
Designation Thickness mm Test Piece
mm Point Strength
and Testing
(min.-max.) min. min.
11.2 ≦ 1.6 ≦ 3.0 ≦ 6.0 ≦ 13.0 ≦ Direction
(N/mm2) (N/mm2)
< 1.6 < 3.0 < 6.0 < 13.0 ≦ 16
JFE Standard
● Dimension tolerance
JIS G 3132 is applied for thickness tolerance and JIS G 3193 is applied for other tolerances.
Strip thickness thicker than 13mm comes to negotiation.
16
Hot rolled atmospheric corrosion resistance steel sheets JFE-HCUP
Superior atmospheric corrosion resistance and general corrosion resistance, combined with adequate
strength, weldability, and formability for structural applications. Rust stabilizes and does not progress after
approximately 2 years. Suitable for exposed parts of buildings and structures.
● Chemical Composition
Chemical Composition (wt%)
Designation
JFE Standard
C Si Mn P S Cu Ni Cr
● Mechanical Properties
Tensile Test
Applied
Thickness Thickness Tensile Elon-
Yield Point
Designation mm Strength gation Testing
min. Test Piece
mm min. min. Direction
(min.-max.) (N/mm2)
(N/mm2) (%)
1.6 ≦
345 480 22 JIS No.5
≦ 6.0 Rolling
JFE-HCUP 1.6-16.0
6.0 < direction
355 490 15 JIS No.1A
≦ 16.0
Reference: 1. JIS No.3 test piece for the bend test can be used in case of sheet thickness equal to or less than 5mm.
2. In case of the sheet thicker than 6.0mm of JFE-HCUP, maximum Mn content becomes 0.60%.
3. The bend test is available depending on a demand.
● Dimension tolerance
JIS G 3193 is applied.
17
Available product size range
����
����
����
���������������(��)
���������������
��� �������
�������
���
�������
�������
������ �������
��� �������
���
� ��� ���� ���� ���� ����
�����������(��)
Available product size range
�������������������:��������������
����
����
����
������
����
���������������(��)
���������������
��� �������
�������
�������
���
�������
�������
������ �������
���
�������
���
� ��� ���� ���� ���� ����
�����������(��)
As there may be minor changes of the available product size range according to standard, application and
method of working, contact and negotiation will be welcomed.
Size outside the available range is subject to negotiation. Available size for cut-length sheets or slit coil is
also subject to negotiation.
18
�������������������:��������������
������� ��������
����
������
����
���������������(��)
���� ���������������
����
���
�������
�������
������ �������
���
� ��� ���� ���� ���� ����
�����������(��)
������
����
���� �����
���������������(��)
���� ���������������
���
��� �������
�������
���
�������
���
� ��� ���� ���� ���� ����
�����������(��)
As there may be minor changes of the available product size range according to standard, application and
method of working, contact and negotiation will be welcomed.
Size outside the available range is subject to negotiation. Available size for cut-length sheets or slit coil is
also subject to negotiation.
19
Available product size range
Pickled coil
�������������������:������������������������
������ �������
���
������ �������
���
���������������(��)
���������������
���
���
�������
�������
������ �������
�������
���
� ��� ���� ���� ����
�����������(��)
Available product size range
�������������������:������������������������
������ �������
���
������ �������
���
���������������(��)
���������������
���
�������
�������
���
�������
�������
������ �������
�������
���
� ��� ���� ���� ����
�����������(��)
As there may be minor changes of the available product size range according to standard, application and
method of working, contact and negotiation will be welcomed.
Size outside the available range is subject to negotiation. Available size for cut-length sheets or slit coil is
also subject to negotiation.
20
�������������������:������������������������
���
������ �������
���
���������������(��)
�������
��� ���������������
�������
���
������ �������
���
� ��� ���� ���� ����
�����������(��)
���
������ �������
���
���������������(��)
������
���
���������������
�������
��� �������
������
�������
������
���
� ��� ���� ���� ����
�����������(��)
As there may be minor changes of the available product size range according to standard, application and
method of working, contact and negotiation will be welcomed.
Size outside the available range is subject to negotiation. Available size for cut-length sheets or slit coil is
also subject to negotiation.
21
Dimensional tolerance (1)
Notes: (1) The value shall be applied to the steel sheet and coil up to and excluding 1,600mm in width.
(2) The value shall be applied to the steel sheet and coil up to and excluding 2,000mm in width.
Remarks: 1. The thickness shall be measured at any point on the steel sheet and coil not less than 20mm from a side edge.
For the steel sheet and coil under 40mm in width, measurement shall be made at the mid width there of.
2. The value specified in Table shall not be applied to to the irregular portions of both ends of the steel coil.
3. The tolerances on the thickness of the steel sheet which is not manufactured from the steel coil may be
agreed between the purchaser and supplier.
Dimensional tolerance
Table : Thickness tolerance specified in JIS G 3132 (Tensile strength 490N/mm2 and more ),
JIS G 3116 (Tensile strength 490N/mm2 and more ) and JIS G 3134
Strip width Tolerance mm
mm
Strip thickness 1,200 ≦ 1,500 ≦ 1,800 ≦
< 1,200
mm < 1,500 < 1,800 < 2,300
< 1.60 ± 0.14 ± 0.15 ± 0.16(3) ̶
1.60 ≦ , < 2.00 ± 0.16 ± 0.19 ± 0.20 ̶
2.00 ≦ , < 2.50 ± 0.18 ± 0.22 ± 0.23 ± 0.25(4)
2.50 ≦ , < 3.15 ± 0.20 ± 0.24 ± 0.26 ± 0.29
3.15 ≦ , < 4.00 ± 0.23 ± 0.26 ± 0.28 ± 0.30
4.00 ≦ , < 5.00 ± 0.26 ± 0.29 ± 0.31 ± 0.32
5.00 ≦ , < 6.00 ± 0.29 ± 0.31 ± 0.32 ± 0.34
6.00 ≦ , < 8.00 ± 0.32 ± 0.33 ± 0.34 ± 0.38
8.00 ≦ , < 10.0 ± 0.35 ± 0.36 ± 0.37 ± 0.44
10.0 ≦ , < 12.5 ± 0.38 ± 0.40 ± 0.41 ± 0.49
12.5 ≦ , ≦ 13.0 ± 0.41 ± 0.44 ± 0.45 ± 0.54
Notes: (3) The value shall be applied to the steel sheet and coil up to and excluding 1,600mm in width.
(4) The value shall be applied to the steel sheet and coil up to and excluding 2,000mm in width.
Remarks: 1. The thickness shall be measured at any point not less than 20mm inside from a side edge of the steel strip.
For the steel strip under 40mm in width, measurement shall be made at the mid width of the steel strip.
2. The value specified in Table shall not be applied to the irregular portions of both ends of
the steel strip.
22
Table :Thickness tolerance specified in JIS G 3193
Reference : 1. Either plus or minus side of the thickness tolerances given in Table may be limited on request. The total tolerances in
this case shall be equal to those given in Table.
2. Thickness shall be measured at any point on the steel strip not less than 25mm from a side edge for the mill edge
strip 50mm or over in width and cut lengths therefrom, and on the center line for those less than 50mmin width. For
the cut edge steel strip 30mm or over in width and cut lengths therefrom, measurement shall be made at any point no
less than 15mmfrom a side edge, and on the center line for those less than 30mm in width.
Thickness shall be measured at any point inward the scheduled cutting line concerning width for the as-rolled steel
plate (with untrimmed edge), and any point not less than 15mm from the aforementioned line for the cut edge plate.
Dimensional tolerance
23
Dimensional tolerance (2)
Tolerance mm
Mill edge Cut edge
Width Thickness A B C
mm mm Steel sheets as rolled Steel coils and steel Normal cut Resheared or
(steel sheets with sheets in cut length edge fine cut edge Slitted edge
untrimmed edge) therefrom
+ − + −
< 3.15 5 2.0 ±0.3
3.15 ≦ , < 6.00 5 3.0 ±0.5
< 160 ̶ ±2 0 0
6.00 ≦ , < 20.00 10 4.0 ̶
20.00 ≦ 10 ̶ ̶
< 3.15 5 2.0 ±0.4
160 ≦ 3.15 ≦ , < 6.00 5 3.0 ±0.5
̶ ±2 0 0
< 250 6.00 ≦ , < 20.00 10 4.0 ̶
20.00 ≦ 15 ̶ ̶
< 3.15 5 2.0 ±0.5
250 ≦ 3.15 ≦ , < 6.00 0 5 3.0 ±0.5
±5 0 0
< 400 6.00 ≦ , < 20.00 + Not specified 10 4.0 ̶
20.00 ≦ 15 ̶ ̶
< 3.15 10 3.0 ±0.5
400 ≦ 3.15 ≦ , < 6.00 0 +20 10 3.0 ±0.5
0 0
< 630 6.00 ≦ , < 20.00 + Not specified 0 10 5.0 ̶
20.00 ≦ 15 ̶ ̶
< 3.15 10 4.0
630 ≦ 3.15 ≦ , < 6.00 0 +25 10 4.0
0 0 ̶
< 1,000 6.00 ≦ , < 20.00 + Not specified 0 10 6.0
20.00 ≦ 15 ̶
Dimensional tolerance
● Length tolerance
Table : Length tolerance specified in JIS G 3193.
24
Packaging and labeling
● Packaging
Products are packaged according to applicable standards and preserved in a properly controlled envi-
ronment until shipment.
● Hot-Rolled Coil
Steel Hoop
Seal
Protecting Piece
Seal
Waterproof Paper
Labels showing the product standard, dimensions, weight, and product serial no. are attached to the
product
25
Excerpts from public standards (1)
● Mechanical Properties
Elongation % Bendability
Inside Radius
Tensile Thickness Thickness Thickness Thickness Thickness Tensile
Symbol Strength 1.2mm or 1.6mm or 2.0mm or 2.5mm or 3.2mm or Thickness Test Bending Thickness Test
N/mm2 over to over to over to over to over to 4.0mm or Piece Thickness
Angle up to Piece
and excl. and excl. and excl. and excl. and excl. over 3.2mm
Excerpts from public standards
and excl.
1.6mm 2.0mm 2.5mm 3.2mm 4.0mm or over
3.2mm
Flat on Thickness
SPHC 270 min. 27min. 29min. 29min. 29min. 31min. 31min. 180°
itself × 0.5
No.5 in No.3 in
SPHD 270 min. 30min. 32min. 33min. 35min. 37min. 39min. rolling ̶ ̶ ̶ rolling
direction direction
SPHE 270 min. 31min. 33min. 35min. 37min. 39min. 41min. ̶ ̶ ̶
26
JIS G 3101 – 1995 Rolled Steels for General Structure
● Chemical Composition
Unit : %
Chemical Composition
Symbol
C Mn P S
SS 330
SS 400 ̶ ̶ 0.050max. 0.050max.
SS 490
Remarks : Alloy elements other than those given in the above table
may be added as necessary.
● Mechanical Properties
Yield point or Yield
Bendability
Strength N/mm2
Tensile Elon-
Thickness of rolled Thickness of rolled steel Test
Symbol Strength gation
steel mm mm Piece Angle of Inside Test
N/mm2 %
16 or Over 16 Bending Radius Piece
under up to 40
5 or under in thickness No.5 26min.
330
Half of
SS 330 205min. 195min. to Over 5 up to 16 in thickness No.1A 21min. 180° No1
thickness
430
Over 16 up to 50 in thickness No.1A 26min.
Remarks : 1. The values given in the table shall not be applied to the both ends of the steel coil.
2. No.3 test piece may be used for the bend test for the steel product 5mm or under in thickness.
27
Excerpts from public standards (2)
● Mechanical Properties
Yield Point or Proof Stress Tensile Strength
Elongation
N/mm2 N/mm2
Thickness of
Symbol Thickness of steel mm
Excerpts from public standards
steel mm
Thickness of steel
Test Piece %
Over 16 mm
16 or under 100 or under
up to 40
28
JIS G 3113 – 1990 Hot-Rolled Steel Plates, Sheets and Strip for Automobile Structural Uses
● Mechanical Properties
Yield Point N/mm2 Elongation (rolling direction) % Bendability
No.1 A
No.5 Test Piece Test Inside Radius
Tensile Thickness Thickness Thickness Piece
Symbol Strength up to 6mm or 8mm or
Bending Test
N/mm2 and excl. over to over to Thickness Thickness Thickness Thickness Thickness
Thickness
and excl. and incl. 1.6 or 2.0 or 2.5 or 3.15 or 4.0 or Thickness Angle Thickness Piece
6mm up to
8mm 14mm overto over to over to over to over to 6.3mm 2.0mm
and excl.
and excl. and excl. and excl. and excl. and excl. or over or over
2.0mm
2.0mm 2.5mm 3.15mm 4.0mm 6.3mm
Flat on Thickness
SAPH 310 310min. (185)min. (185)min. (175)min. 33min. 34min. 36min. 38min. 40min. 26min. 180°
itself × 1.0
No.3
Thickness Thickness
SAPH 370 370min. 225min. 225min. 215min. 32min. 33min. 35min. 36min. 37min. 25min. 180° trans-
× 0.5 × 1.0
versely
Thickness Thickness
SAPH 400 400min. 255min. 235min. 235min. 31min. 32min. 34min. 35min. 36min. 24min. 180° to rolling
× 1.0 × 1.0
direction
Thickness Thickness
JIS G 3116 – 2000 Steel sheets, plates and strip for gas cylinders
● Chemical Composition
Unit : %
Chemical Composition
Symbol
C Si Mn P S
SG 255 0.20 max. ̶ 0.30 max. 0.040 max. 0.040 max.
SG 295 0.20 max. 0.35 max. 1.00 max. 0.040 max. 0.040 max.
SG 325 0.20 max. 0.55 max. 1.50 max. 0.040 max. 0.040 max.
SG 365 0.20 max. 0.55 max. 1.50 max. 0.040 max. 0.040 max.
Remarks : Alloying elements other than those shown in the table may be added if necessary.
● Mechanical Properties
Bendability
Yield Point or Tensile Tensile
Elongation
Symbol Proof Stress Strength Test
% Bending
N/mm2 N/mm2 Piece Inside Radius Test Piece
Angle
29
Excerpts from public standards (3)
SPA-H 0.12 max. 0.25 to 0.75 0.20 to 0.50 0.070 to 0.150 0.040 max. 0.25 to 0.60 0.30 to 1.25 0.65 max.
Remarks : 1. For the steel over 6.0mm in thickness, the upper limit of manganese content shall be 0.60%.
2. Alloy elements other than those in the above table may be added as required.
● Mechanical Properties
Note (1) For SPA-H steel sheet and strip of 6.0mm and under in thickness, inside radius for bend ability may be 1.0 times
as large as the thickness subject to agreement between the parties concerned.
Excerpts from public standards
JIS G 3132 – 1990 Hot-Rolled Carbon Steel Strip for Pipes and Tubes
● Chemical Composition Unit : %
Chemical Composition
Symbol
C Si Mn P S
SPHT 1 0.10 max. 0.35 max. (1) 0.50 max. 0.040 max. 0.040 max.
SPHT 2 0.18 max. 0.35 max. 0.60 max. 0.040 max. 0.040 max.
SPHT 3 0.25 max. 0.35 max. 0.30 to 0.90 0.040 max. 0.040 max.
SPHT 4 0.30 max. 0.35 max. 0.30 to 1.00 0.040 max. 0.040 max.
Note (1) The maximum silicon content may be modified to 0.04% max. by agreement between the purchaser and the supplier.
● Mechanical Properties
Elongation % Bendability
Inside Radius
Tensile 1.2mm or 1.6mm or 3.0mm or 6.0mm or Tensile
Symbol Strength over to over to over to over up to Test Bending Over 3.0mm up Test
N/mm2 and excl. and excl. and excl. and incl. Piece 3.0mm or under
Angle to and incl. 13mm in Piece
1.6mm in 3.0mm in 6.0mm in 13mm in in thickness
thickness thickness thickness thickness thickness
SPHT 1 270min. 30min. 32min. 35min. 37min. 180° Flat on itself Thickness × 0.5
No.5
No.3
SPHT 2 340min. 25min. 27min. 30min. 32min. Test Piece 180° Thickness × 1.0 Thickness × 1.5 taken in
taken in
SPHT 3 410min. 20min. 22min. 25min. 27min. 180° Thickness × 1.5 Thickness × 0.5 rolling
rollin
direction
direction
SPHT 4 490min. 15min. 18min. 20min. 22min. 180° Thickness × 1.5 Thickness × 2.0
Remarks : The values given in the above table are not applicable to the irregular portions at the either end of the steel strip.
30
JIS G 3134 – 1990 Hot Rolled High Strength Steel Sheets with Improved Formability for Automobile
Structural Uses
● Chemical Composition
The chemical composition shall be agreed upon by the purchaser and supplier, if necessary.
● Mechanical Properties
Elongation % Bendability
Thickness Thickness
SPFH 490 490min. 325min. 22min. 23min. 24min. 25min.
× 0.5 × 1.0
Thickness Thickness
SPFH 540 540min. 355min. 21min. 22min. 23min. 24min.
× 1.0 × 1.5
No.5 No.3
test piece test piece
Thickness Thickness
SPFH 590 590min. 420min. 19min. 20min. 21min. 22min. taken in 180° taken in
× 1.5 × 1.5
transverse transverse
direction direction
Thickness Thickness
Thickness Thickness
SPFH 590 Y 590min. 325min. ̶ 22min. 23min. 24min.
× 1.5 × 1.5
31
Excerpts from public standards (4)
● Tensile Requirements
36 58-80
23 min. ̶
[250] [400-550]
Remarks : For plates wider than 24in.[600mm], the elongation requirement
is reduced two percentage points.
ASTM A283 - 2000 Low and Intermediate Tensile Strength Carbon Steel Plates
Excerpts from public standards
Chemical Composition
Symbol
C Si Mn P S Cu
Grade A 0.14 max. 0.40 max. 0.90 max. 0.035 max. 0.040 max. 0.20 min. ,when required
Grade B 0.17 max. 0.40 max. 0.90 max. 0.035 max. 0.040 max. 0.20 min. ,when required
Grade C 0.24 max. 0.40 max. 0.90 max. 0.035 max. 0.040 max. 0.20 min. ,when required
Grade D 0.27 max. 0.40 max. 0.90 max. 0.035 max. 0.040 max. 0.20 min. ,when required
● Mechanical Requirements
45-60
Grade A 24[165] 30 min. ̶
[310-415]
50-65
Grade B 27[185] 28 min. ̶
[345-450]
55-75
Grade C 30[205] 25 min. ̶
[380-515]
60-80
Grade D 33[230] 23 min. ̶
[415-550]
Remarks : For plates wider than 24in. [600mm], the elongation requirement
is reduced two percentage points.
32
ASTM A572 - 2001 High-Strength Low-Alloy Columbium-Vanadium Structural Steel
1 0.005-0.05 ̶ ̶ ̶ ̶
● Tensile Requirements
Yield Point min. ksi Tensile Strength min. ksi Min. Elongation %
Symbol
[MPa] [MPa] in 2 in [50mm]
ASTM A606 - 2001 Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and
Cold-Rolled, with Improved Atmospheric Corrosion Resistance
● Chemical Requirements ● Tensile Requirements
Unit : %
Chemical Composition Yield point min Tensile Strength Elongation min.
Bending Property
C Mn S ksi [MPa] min. ksi [MPa] % in 2in.[50mm]
0.22 (0.26) max. 1.25 (1.30) max. 0.04 (0.06) max. 50 [340] 70 [480] 22 2½t
Remarks : The figures in ( ) is product analysis.
33
Excerpts from public standards (5)
Grade 0.25 0.90 0.035 0.04 0.20 0.20 0.15 0.06 0.008 0.008
̶ ̶ ̶ ̶
40[275] max. max. max. max. max. max. max. max. max. max.
Grade 0.25 1.35 0.035 0.04 0.20 0.20 0.15 0.06 0.008 0.008
̶ ̶ ̶ ̶
45[310] max. max. max. max. max. max. max. max. max. max.
Grade 0.25 1.35 0.035 0.04 0.20 0.20 0.15 0.06 0.008 0.008
̶ ̶ ̶ ̶
50[345] max. max. max. max. max. max. max. max. max. max.
Grade 0.25 1.35 0.035 0.04 0.20 0.20 0.15 0.06 0.008 0.008
̶ ̶ ̶ ̶
55[380] max. max. max. max. max. max. max. max. max. max.
Grade 0.22 1.35 0.04 0.04 0.20 0.20 0.15 0.06 0.01 0.005
HSLAS Class 1 ̶ ̶ ̶ ̶
45[310] max. max. max. max. max. max. max. max. min. min.
Grade 0.15 1.35 0.04 0.04 0.20 0.20 0.15 0.06 0.01 0.005
Class 2 ̶ ̶ ̶ ̶
45[310] max. max. max. max. max. max. max. max. min. min.
Grade 0.23 1.35 0.04 0.04 0.20 0.20 0.15 0.06 0.01 0.005
Class 1 ̶ - ̶ ̶
50[340] max. max. max. max. max. max. max. max. min. min.
Grade 0.15 1.35 0.04 0.04 0.20 0.20 0.15 0.06 0.01 0.005
Class 2 ̶ ̶ ̶ ̶
50[340] max. max. max. max. max. max. max. max. min. min.
Grade 0.25 1.35 0.04 0.04 0.20 0.20 0.15 0.06 0.01 0.005
Class 1 ̶ ̶ ̶ ̶
55[380] max. max. max. max. max. max. max. max. min. min.
Grade 0.15 1.35 0.04 0.04 0.20 0.20 0.15 0.06 0.01 0.005
Class 2 ̶ ̶ ̶ ̶
55[380] max. max. max. max. max. max. max. max. min. min.
Grade 0.26 1.50 0.04 0.04 0.20 0.20 0.15 0.06 0.01 0.005
Class 1 ̶ ̶ ̶ -
60[410] max. max. max. max. max. max. max. max. min. min.
Grade 0.15 1.50 0.04 0.04 0.20 0.20 0.15 0.06 0.01 0.005 0.020
Class 2 ̶ ̶ ̶
60[410] max. max. max. max. max. max. max. max. min. min. max.
Grade 0.26 1.50 0.04 0.04 0.20 0.20 0.15 0.06 0.01 0.005 0.012
Class 1 ̶ ̶ ̶
65[450] max. max. max. max. max. max. max. max. min. min. max.
Grade 0.15 1.50 0.04 0.04 0.20 0.20 0.15 0.06 0.01 0.005 0.020
Class 2 ̶ ̶ ̶
65[450] max. max. max. max. max. max. max. max. min. min. max.
Grade 0.26 1.65 0.04 0.04 0.20 0.20 0.15 0.06 0.01 0.005 0.012
Class 1 ̶ ̶ ̶
70[480] max. max. max. max. max. max. max. max. min. min. max.
Grade 0.15 1.65 0.04 0.04 0.20 0.20 0.15 0.06 0.01 0.005 0.020
Class 2 ̶ ̶ ̶
70[480] max. max. max. max. max. max. max. max. min. min. max.
Grade
50[340]
0.15 1.65 0.020 0.025 0.20 0.20 0.15 0.06
HSLAS-F 60[410] ̶ ̶ ̶ ̶ ̶ ̶
max. max. max. max. max. max. max. max.
70[480]
80[550]
34
● Mechanical Property Requirements
Elongation in 2in.[50mm] min.
Yield Tensile
Type Strength Strength Under 0.064
Designation Grade For CS, Under 0.230 Under 0.097
Class min. min. [1.6mm] to
DS [6.0mm] to [2.5mm] to
ksi [MPa] ksi [MPa] 0.025
Grades 0.097 [2.5mm] 0.064 [1.6mm]
[0.65mm]
35
Excerpts from public standards (6)
SAE Standard
J403- 2000
●Chemical Composition Unit : %
Chemical Composition
UNS No. SAE No.
C Mn P, max. S, max.
G 10050 1005 0.06 max. 0.35 max. 0.030 0.050
G 10060 1006 0.08 max. 0.25 - 0.40 0.030 0.050
G 10080 1008 0.10 max. 0.30 - 0.50 0.030 0.050
G 10090 1009 0.15 max. 0.60 max. 0.030 0.050
G 10100 1010 0.08 - 0.13 0.30 - 0.60 0.030 0.050
G 10120 1012 0.10 - 0.15 0.30 - 0.60 0.030 0.050
G 10130 1013 0.11 - 0.16 0.30 - 0.60 0.030 0.050
G 10150 1015 0.13 - 0.18 0.30 - 0.60 0.030 0.050
G 10160 1016 0.13 - 0.18 0.60 - 0.90 0.030 0.050
G 10170 1017 0.15 - 0.20 0.30 - 0.60 0.030 0.050
G 10180 1018 0.15 - 0.20 0.60 - 0.90 0.030 0.050
G 10190 1019 0.15 - 0.20 0.30 - 0.60 0.030 0.050
G 10200 1020 0.18 - 0.23 0.30 - 0.60 0.030 0.050
G 10210 1021 0.18 - 0.23 0.60 - 0.90 0.030 0.050
G 10220 1022 0.18 - 0.23 0.70 - 1.00 0.030 0.050
G 10230 1023 0.20 - 0.25 0.30 - 0.60 0.030 0.050
G 10250 1025 0.22 - 0.28 0.30 - 0.60 0.030 0.050
G 10260 1026 0.22 - 0.28 0.60 - 0.90 0.030 0.050
Excerpts from public standards
36
Correspondence with JFE standards to public standards
Designation
Classification
JFE's standard JIS ASTM Others
Anti-sea Water
JFE-MARIN
Corrosion Steel Sheets
to public standards
Steel Sheets in High
LFE-HHCR
Temperature Atmosphere
37
�����������������
http://www.jfe-steel.co.jp/en/
TOKYO HEAD OFFICE �������������������������������������������������������������������������������������
���������������������������� ���������������������
Notice
�����������������������������������������������������������������������������������������������������������������������������������������������
�������������������������������������������������������������������������������������������������������������������������������������������
��������������������������������������������������������������������������������������������������������������������������������������������������������
���������������
����������������