Professional Documents
Culture Documents
00 356 Tipo 530.09.276 en 01 03.16 Si Ucrn5
00 356 Tipo 530.09.276 en 01 03.16 Si Ucrn5
T I P O 4 D O O R S
ČESKÁ
1
NAVIGATION . . . . . . . . . . . . . . . 32 ENTERING THE COORDINATES . 46 LOCATION . . . . . . . . . . . . . . . . . 59
SWITCHING ON . . . . . . . . . . . . . 32 PLANNING A ROUTE USING A CHANGING THE HOME
GPS RECEPTION . . . . . . . . . . . . 32 MAP . . . . . . . . . . . . . . . . . . . . . . 47 LOCATION . . . . . . . . . . . . . . . . . 59
SAFETY SETTINGS . . . . . . . . . . 32 PLANNING A ROUTE USING ADDING A LOCATION TO THE
ASSISTANCE FOR USING THE FAVOURITES . . . . . . . . . . . . . . . 47 FAVOURITES LIST . . . . . . . . . . . 59
NAVIGATION SYSTEM . . . . . . . . 33 SEARCHING FOR A PARKING ADD A LOCATION FROM THE MAP
LOT . . . . . . . . . . . . . . . . . . . . . . 49 TO FAVOURITES . . . . . . . . . . . . . 59
SCREEN CONTENTS . . . . . . . . 33 SEARCHING FOR A SERVICE ADDING A LOCATION TO
Uconnect™ 5" Nav LIVE
2
IMPORTANT NOTICES . . . . . . . . 63
IMPORTANT INFORMATION ON
COPYRIGHTS . . . . . . . . . . . . . . . 64
VOICE COMMANDS . . . . . . . . . 65
USE OF THE VOICE
COMMANDS . . . . . . . . . . . . . . . 65
USE OF STEERING WHEEL
3
4
Uconnect™ 5" Nav LIVE
INTRODUCTION
The vehicle is equipped with an infotelematic system designed according to the specific characteristics of the passenger
compartment, with a customised design that matches the style of the dashboard.
The system is installed in an ergonomic position for the driver and passenger and controls can be quickly identified from the
graphics on the front making the device easy to use.
All data contained in this publication are purely indicative. FCA Italy S.p.A. can modify the specifications of the object
described in this publication at any time, for technical or marketing purposes. For further information, contact a Fiat
Dealership.
5
TIPS, CONTROLS the display is sensitive to scratching, MULTIMEDIA DEVICES:
AND GENERAL liquids and detergents. The display SUPPORTED AUDIO
FILES AND FORMATS
INFORMATION should not come into contact with
pointed or rigid objects which could For USB and iPod sources the system
damage its surface. Do not press can play files with the following
TIPS
on the display when cleaning it. extensions and formats:
Road safety never use alcohol, petrols and .MP3 (32 – 320 kbps);
Uconnect™ 5" Nav LIVE
Learn how to use the various system derivatives to clean the display lens. .WAV (8/16 bit, 8-48 KHz);
functions before setting off. prevent any liquid from entering the .WMA (5 – 320Kbps) mono and
Read the instructions for the system system: this could damage it beyond stereo provided that they are
carefully before setting off. repair. non-lossless;
1) 2) .AAC (8 – 96 kHz) mono and stereo;
Important notes
.M4A (8 – 96 kHz) mono and stereo;
Reception conditions In the event of a failure, the system
should only be checked and repaired at .M4B (8 – 96 kHz) mono and stereo;
Reception conditions change
a Fiat Dealership. .MP4 (8 – 96 kHz) mono and stereo.
constantly while driving. Reception may
be interfered with by the presence of If the temperature is particularly low, the For all sources (AUX and iPod), the
mountains, buildings or bridges, display may take a while to reach system can also play the following
especially when you are far away from optimum brightness. Playlist formats:
the broadcaster. If the vehicle is stopped for a while and .M3U
IMPORTANT The volume may be the external temperature is very high,
.WPL
increased when receiving traffic the system may go into “thermal
bulletins. protection” mode, suspending NOTE It makes no difference whether
operation until the temperature in the the suffixes are written in capital or
Care and maintenance passenger compartment returns to small letters.
acceptable levels. NOTE It is recommended to load only
Observe the following precautions to
ensure the system is fully operational: unprotected music files, with supported
extensions. If the external audio device
1) 2)
has other formats (e.g. .exe, .cab,
.inf, etc.) problems might arise during
playing of tracks.
6
NOTES ON TRADEMARKS EXTERNAL AUDIO Entering the secret code
iPod, iTunes and iPhone are registered SOURCES
When the system is switched on, if the
trademarks of Apple Inc. Other electronic devices (e.g. iPod, code is requested, the display will
PDA, etc.) can be used on the vehicle. show "Please enter Anti-Theft Code"
All other trademarks are the property of
their respective owners. Some of them may cause followed by the screen showing a
electromagnetic interference however. keypad to enter the secret code.
Disconnect these devices if the system
7
In case of loss of the car radio 2 x 165 mm front Full-Range
passport, contact the Fiat Dealership, speakers ;
taking an ID document and the car 2 x 130 mm rear Full-Range
ownership documents. speakers .
Medium level audio system
IMPORTANT NOTES
6 loudspeakers:
Uconnect™ 5" Nav LIVE
8
QUICK GUIDE
9
FRONT PANEL CONTROL SUMMARY TABLE
10
CONTROLS ON STEERING WHEEL
The controls for the main system functions are present on the steering wheel to make control easier.
The activation of the function selected is controlled, in some cases, by how long the button is pressed (short or long press) as
described in the table below.
11
STEERING WHEEL CONTROL SUMMARY TABLE
Button Interaction
Short press (phone mode): selection of next/previous call or SMS (only with call browsing
active)
12
CONTROLS BEHIND THE STEERING WHEEL
Buttons Interaction
Button 1 (steering wheel left side)
Brief button press: search for next radio station or selection of USB/iPod
next track.
Brief button press: search for previous radio station or selection of USB/
iPod next track.
Lower button
Long button press: scan of lower frequencies until released/fast forward of
USB/iPod track.
Button 2 (steering wheel right side)
Increasing volume
Upper button Brief button press: single volume increase
Long button press: fast volume increase
Central button Activation/deactivation of Mute function
Decreasing volume
Lower button Brief button press: single volume decrease
Long button press: fast volume decrease
13
SWITCHING THE Each tuning mode can have a specific In the middle: display of the name of
SYSTEM ON AND set of presets. the current radio station and the
OFF buttons for selecting the previous or
SELECTING A next radio station.
RADIO (TUNER) MODE FREQUENCY BAND At the bottom: display of the following
The system is switched on/off by Briefly press the "AM/FM" button to buttons:
pressing the (ON/OFF) button/knob. switch from AM to FM and vice versa.
Uconnect™ 5" Nav LIVE
4 F1B1000C
14
PREVIOUS/NEXT RADIO Incomplete radio station selection
STATION SEARCH ("OK")
Briefly press buttons or on Press the "OK" button on the display to
the display: when the button is released tune to the radio station selected and
the previous or the next radio station close the "Direct Tune" screen (manual
is displayed. tuning).
When searching forwards, if the system
15
Selection of the previous/next radio SETTING THE "Speed/Volume" (speed-dependent
station by: PRESELECTIONS automatic volume control);
turning the BROWSE ENTER Presets are available in all system "Loudness" (for versions/markets,
button/knob; modes and are activated by touching where provided);
briefly pressing the or one of the preset buttons located in the
upper area of the display. "Auto-On Radio";
buttons on the display;
If you are tuned to a radio station that To exit the "Audio" menu, press the
Uconnect™ 5" Nav LIVE
16
Then press the /Done button to Then press the /Done button to Auto-On Radio
return to the "Audio" menu. return to the "Audio" menu. Allows you to set the radio behaviour
Balance/Fader when the ignition key is turned to MAR.
Volume/Speed
Press the "Balance/Fader" button to The options are radio on, radio off or
balance the sound from the front and Press the "Volume/Speed" button to restore status when the ignition key was
rear seat speakers. choose between "Off" and "1, 2 or 3". last turned to STOP.
9 F1B1004C
8 F1B1003C
17
MEDIA MODE TRACK FAST
FORWARD/REWIND
AUDIO SOURCE Press and hold down the button to
SELECTION fast forward the selected track or keep
This chapter describes the interaction the button pressed to fast rewind
modes concerning the operation of the track.
Bluetooth®, AUX and USB. The fast forward/rewind will stop once
Uconnect™ 5" Nav LIVE
TRACK SELECTION
(Browse)
If no source is selected, the screen
Use this function to scroll through and
disappears after a few seconds and the
select the tracks on the active device.
display shows the main screen
fig. 10 again. The choices available depend on the
device connected.
Note Applications used on portable
devices may be not compatible with the For example, on a USB/iPod or
10 F1B2020C
Uconnect™ system Bluetooth® device you can also scroll
through the list of artists, genres and
Press the "Support" button fig. 10 to albums available depending on the
TRACK CHANGE
select the desired audio source among (previous/next) information present on the same tracks.
those available: AUX, USB or
Briefly press the button or turn the NOTE A few Bluetooth® devices do
Bluetooth®.
BROWSE ENTER button/knob not offer the possibility of scrolling
clockwise to play the next track or tracks through all categories.
briefly press the button or turn the Within each list, the "ABC" button
BROWSE ENTER button/knob allows the user to skip to the desired
anticlockwise to return to the beginning letter in the list.
of the selected track or to the beginning
of the previous track if this has been NOTE This button might be disabled for
played for less than 3 seconds. some Apple®devices.
18
NOTE Not all Bluetooth® devices TRACK INFORMATION Bluetooth® SOURCE
enable you to scroll the information on DISPLAY
the tracks. To review the list of audio Press the "Info" button to display the This mode is activated by pairing a
Bluetooth® devices and supported information on the track being listened Bluetooth® device containing music
functions, visit the www.fiat.it website to for devices that support the function. tracks with the system.
(for Italy) or the www.fiat.com website Press the "X" button to exit the screen.
(for other countries) or call Customer PAIRING A Bluetooth®
19
if the pairing procedure is completed USB/iPod SOURCE AUX SOURCE
successfully, a screen is displayed.
Answer "Yes" to the question to pair the To activate the USB/iPod mode insert To activate AUX mode, insert an
Bluetooth® audio device as favourite the corresponding device (USB or iPod) appropriate device in the AUX socket
(the device will have priority over all in the USB port located in the central on the vehicle.
other devices to be paired console. When a device is inserted using the
subsequently). If "No" is selected, the If a USB/iPod device is inserted with the AUX output socket the system starts
Uconnect™ 5" Nav LIVE
priority is determined according to system on, this starts playing the reproducing the AUX source
the order of connection. The last device tracks present on the device. connected, if it is already being played.
connected will have the highest
Adjust the volume using the
priority;
button/knob on the front panel or
an audio device can also be paired using the volume adjustment control on
by pressing the PHONE button the connected device.
on the front panel and by selecting
For the "Audio source selection"
"Settings" or, from the "Settings" menu,
function, see the "Media mode"
selecting "Phone/Bluetooth".
chapter.
WARNING If the Bluetooth®
connection between mobile phone and IMPORTANT NOTES
system is lost, consult the mobile
phone handbook. The functions of the device connected
with the AUX socket are directly
managed by the device itself: it is not
possible to change track/folder/playlist
or control playing start/end/pause
with the controls on the front panel or
on the steering wheel.
Do not leave the cable of your portable
player connected to the AUX socket
after disconnection, to avoid possible
hiss from the speakers.
20
PHONE MODE display and call contacts from the To consult the list of mobile phones and
registers of previous calls; supported functions, visit the
PHONE MODE pair up to 10 phones/audio devices www.fiat.it website (for Italy) or the
ACTIVATION to make access and connection easier www.fiat.com website (for other
Press the PHONE button on the front and quicker; countries) or call Customer Service on
panel to activate the Phone mode. 00800.3428.0000 (the number may
transfer calls from the system to the vary depending on the country: please
21
select "Yes" to start the pairing Note On some mobile phones, to make For further details, consult your mobile
procedure, then search for the the SMS voice reading function phone owner's handbook.
Uconnect™ device on the mobile available, the SMS notification option WARNING The names in the
phone (if "No" is selected, the Phone on the phone must be enabled; this phonebook not containing phone
main screen is displayed); option is usually available on the phone, numbers or name and surname will not
when prompted by the mobile in the Bluetooth® connections menu be displayed.
phone, use its keypad to enter the PIN for a device registered as Uconnect™.
Uconnect™ 5" Nav LIVE
code shown on the system display After enabling this function on the
mobile phone, it must be disconnected CONNECTION/
or confirm on the mobile phone the PIN DISCONNECTION OF A
displayed; and reconnected with the Uconnect™ MOBILE PHONE OR A
system in order to make it effective. Bluetooth® AUDIO
from the "Phone" screen you can DEVICE
always pair a mobile phone by pressing Note After updating the phone
the "Settings" button: press the "Add software, for proper operation, it is
recommended to remove the phone Connection
Device" button and proceed as
described above; from the list of devices linked to the The system connects automatically to
radio, delete the previous system the paired mobile phone with the
during the pairing stage a screen is pairing also from the list of Bluetooth® highest priority.
displayed showing the progress of devices on the phone and make a
the operation; To select a mobile phone or a specific
new pairing.
Bluetooth® audio device, proceed
when the pairing procedure is as follows:
completed successfully, a screen is STORING NAMES/
displayed: answer "Yes" to the question NUMBERS IN THE press the MEDIA button on the front
to pair the mobile phone as favourite MOBILE PHONE panel, then "Support" and "Bluetooth";
(the mobile phone will have priority over PHONEBOOK select "Phone/Bluetooth" on the
all other mobile phones to be paired Before pairing your mobile phone, you display;
subsequently). If no other devices are must make sure you have stored the
select the "Paired Phones" or "Paired
paired, the system will consider the first names you want to contact in the
Audio" list using the corresponding
associated device as favourite. phonebook on your mobile phone so
button on the display;
that you can call them using the
Note The priority is determined
vehicle's hands-free system. select the specific device (mobile
according to the order of connection for
phone or Bluetooth® device);
mobile phones which are not set as If your phonebook does not contain any
favourites. The last phone connected names, enter new names for the most press the "Connect" button;
will have the highest priority. frequently used numbers.
22
during the connection stage a screen select "Phone/Bluetooth" on the the device selected is moved to the
is displayed showing the progress of display; top of the list.
the operation; select the "Paired Phones" or "Paired
the device connected is highlighted Audio" list using the corresponding TRANSMISSION OF
in the list. button on the display; PHONE DATA
(PHONEBOOK AND
select the device (mobile phone or RECENT CALLS)
Disconnection
23
Depending on the amount of items selecting the icon (mobile phone Recent calls
downloaded from the phonebook, a phonebook); The list of the last calls made for each
slight delay can occur before the last selecting "Recent Calls"; of the following call types can be
names downloaded can be used. Up to displayed:
then the phonebook downloaded selecting the icon;
previously (if present) will be available. pressing the "Redial" button. Calls received;
Only the phonebook of the mobile Calls made;
Uconnect™ 5" Nav LIVE
phone currently connected to the Dialling the phone number using Calls without a reply;
system can be accessed. the "keyboard" icon on the display
All calls.
The phonebook downloaded from the Enter the phone number using the
graphic keypad displayed. To access these types of call, press the
mobile phone can neither be modified
"Recent Calls" button on the Phone
nor be deleted through the system: Proceed as follows:
menu main screen.
changes will be transmitted and press the PHONE button on the front
updated in the system when the mobile panel;
phone is next connected. MANAGING AN
press the button on the display INCOMING CALL
and use the numbered buttons to enter
DELETION OF PHONE the number; Call controls
DATA (PHONEBOOK AND
RECENT CALLS) press the "Call" button to make a The buttons on the display allow the
Select "Delete Phone Data" on the call. following phone call functions to be
display to delete the list of recent calls managed:
and the phonebook copy. Dialling the phone number using Answer;
the mobile phone
End;
MAKING A PHONE CALL It is possible to dial a phone number
with the mobile phone and continue Ignore;
The operations described below can
only be accessed if supported by using the system (never allow yourself Put on hold/resume;
the mobile phone in use. to be distracted while driving). Deactivate/activate the microphone;
For all functions available, refer to the When a phone number is dialled with Transfer the call;
mobile phone owner's handbook. the keypad of the mobile phone, the
audio of the call is played over your Switch from one call to the other;
A call can be made by: vehicle's sound system. Conference/merge two active calls.
24
Answer a call Pressing the button will display the Check whether the telephone in use
When a phone call is received on the last 10 calls (missed/ received/ made). supports the management of a second
mobile phone, the system deactivates Using the / buttons, you can call and the "Conference" mode.
the audio system (if active) and displays select the desired number from the last
a screen. 10 calls and call back by pressing the ENDING A CALL
Press the "Answer" button or the button again. Press the "End" button or the
button on the steering wheel
25
ACTIVATION/ When a text message is received, the SMS MESSAGE OPTIONS
DEACTIVATION OF THE display will show a screen where the
MICROPHONE options "Listen", "Call" or "Ignore" can Default SMS messages are stored in
During a call the microphone can be be selected. the system memory and can be sent to
deactivated pressing the button on answer a received message or as a
Press the button to access the list new message.
the front panel or the "Mute" button
of SMS messages received by the
on the display. When receiving an SMS, the systems
mobile phone (the list displays a
Uconnect™ 5" Nav LIVE
When the microphone is deactivated it maximum of 60 messages received). also allows the same message to
is still possible to listen to the call in be forwarded.
progress. SMS message reader activation/
To reactivate the microphone, press the deactivation
corresponding button again. The SMS message automatic reading
function can be activated/deactivated
TRANSFERRING A CALL by pressing the corresponding button
on the display, which is shown after
The ongoing calls can be transferred
pressing the phone selection button.
from the mobile phone to the system
and vice versa without ending the calls. On some mobile phones, to make the
To transfer the call, press the "Transfer" SMS voice reading function available,
button. the SMS notification option on the
phone must be enabled; this option is
usually available on the phone, in the
SMS MESSAGE READER Bluetooth® connections menu for
The system can read the messages a device registered as Uconnect™.
received by the mobile phone. After enabling this function on the
To use this function the mobile phone mobile phone, it must be disconnected
must support the SMS exchange and reconnected with the Uconnect™
function through Bluetooth®. system in order to make it effective.
If this function is not supported by the
phone, the corresponding button is
deactivated (greyed out).
26
APPS MODE driving and "Navigation mode" SETTINGS
information. Press the button on the front panel
Press the APPS button to access a
to display the main "Settings" menu
radio menu which shows all the
TRIP (see fig. 14 ).
application functions of the system,
such as: clock, external temperature, Press the "Trip" button fig. 13 to access NOTE The menu items displayed vary
compass, trip. the screens containing the Trip according to the versions.
13 11086J0001EM
14 F1B1080C
EXTERNAL
TEMPERATURE The menu includes the following items:
27
Audio; "Touchscreen Beep": press the "Fuel Consumption": allows you to
Phone / Bluetooth; relevant button to activate/deactivate select the units of measurement for fuel
the acoustic signal when the buttons on consumption. If the unit of
Configurat. SiriusXM (for versions/ the display are pressed. measurement for distance is "km",
markets where provided); "km/l" or "l/100 km" can be selected,
"Display Trip B" (for versions/
Radio Setup; markets, where provided): press the while if the unit of measurement for
relevant button to activate/deactivate distance is "mi" (miles), "mpg" is set
Restore settings
Uconnect™ 5" Nav LIVE
28
Clock & Date The "am" and "pm" buttons are “Rear View camera" (where
Use this function to set the clock. available in "12h" mode. provided): this function can be used to
carry out the following adjustments:
The options available are: Show Time Status - "Active Guidelines" (where provided):
"Set Time & Format"; In the Clock menu it is possible to permits the activation of dynamic grids
"Display Clock"; select "Show Time Status" which allows that indicate the route of the vehicle
clock status display to be activated/ on the display.
29
"Fwd Coll. Sensitivity" (for versions/ "Rear Park Assist vol." (for "Rain sensor" (for versions/markets,
markets, where provided): this function versions/markets, where provided): this where provided): this function can be
can be used to select the "readiness" function can be used to select the used to activate/deactivate the
of the system to intervene, on the basis volume of the acoustic warnings automatic operation of the wipers in the
of distance from the obstacle. provided by the rear Park Assist event of rain.
The options available are "Near", system. Brakes
"Med", "Far". "Park Assist vol." (for versions/ (for versions/markets, where provided)
Uconnect™ 5" Nav LIVE
30
“Headlights Off Delay" (for versions/ "Auto Unlock on Exit": permits the "Keyless Entry" (for versions/markets,
markets, where provided): headlight automatic unlocking of the doors when where provided): permits the activation
deactivation delay after switching off the exiting the vehicle; of the automatic door closing strategy.
vehicle setting; "Flash Lights w/Lock" (for versions/
"Courtesy Lights" (for versions/ markets, where provided): permits Vehicle Shutdown Options
markets, where provided): the activation of flashing when This function can be used to make the
activation/deactivation of the courtesy the doors are locked; following adjustments:
31
"Skip Channel": permits the selection Restore settings NAVIGATION
of satellite radio channels to be Use this function to restore the settings
skipped; for display, time, date, audio and radio SWITCHING ON
"Subscription Information": displays to the default values set by the
Sirius subscription information. manufacturer. Press the "NAV" button to activate the
navigation mode.
Radio Setup
Uconnect™ 5" Nav LIVE
GPS RECEPTION
This function can be used to configure
the following options: When Uconnect™ Radio Nav 5" is
"Traffic Announcement": activation/ started for the first time, the system
deactivation of automatic tuning to may require several minutes to
traffic announcements ("TA" function); determine the GPS position and display
the current position on the map.
"Altern. Frequency": activation/
Afterwards the position will be found
deactivation of the automatic tuning to
much more quickly, usually a few
the strongest signal for the station
seconds are needed.
selected ("AF" function);
The presence of high buildings (or
"Regional": activation/deactivation of
similar obstacles) may sometimes
automatic tuning to a station which
interfere with the GPS reception.
broadcasts regional news ("REG"
function);
SAFETY SETTINGS
"Playing DAB Announcements" (for
versions/markets, where provided): We advise to use the safety settings to
activation/deactivation of automatic make driving as safe as possible.
tuning to DAB announcements and
Here are a few options included in the
selection of announcement categories
safety settings:
of interest from those available.
Show safety warnings;
Alert if speed limits are exceeded.
For safer driving, use voice commands
to control navigation.
32
ASSISTANCE FOR USING SCREEN CONTENTS If a route is planned, the map display is
THE NAVIGATION zoomed out to show the area around
SYSTEM the current location.
MAP DISPLAY
For more information, visit If a route is planned, the map will show
www.tomtom.com/support. The map display is shown when there is the full route. When you start driving,
no route planned. When Uconnect™ the navigation view is displayed.
5" Nav finds the GPS position, it
33
3. Map symbols. The map uses 6. Main menu button. Select the NAVIGATION VIEW
symbols to indicate destination and button to open the Main menu;
saved places: Navigation view is used to show
7. Zoom buttons. Select the zoom indications along the route toward the
– Destination buttons to zoom in or out;
– Home. You can set the Home destination. Navigation view is
position in Favourites. For further 8. The route, if any was planned. displayed when you start driving. The
information on Favourites, see Select the route to delete it, to change current position and details, including
3D buildings in some cities, are
Uconnect™ 5" Nav LIVE
34
5. Speed panel. This panel shows
the following information, if available:
– Speed limit for the current position
– Name of the street you are on. If
you are driving at more than 5 km/h
(3 miles/hour) above the speed
limit, the speed panel turns red. If
35
Tip: if the destination is in a different For a full list of the type of traffic issues, if the remaining distance is below
time zone, the arrival information panel see section Traffic issues in Chapter 10 km (6 miles), the full distance is
will show a plus (+) or a minus (-) sign "Traffic". displayed. The destination icon is
and the time difference in hours and The lower part of the route bar shows moved down to the gallon symbol when
half hours. The arrival time is in the the current position and the distance you approach your destination.
destination local time. until the next problem along the route. The upper half of the route bar shows
If the route includes stopovers, select In addition, you can choose to show twice the distance of the lower half,
Uconnect™ 5" Nav LIVE
this panel to toggle between displaying current time, if the setting is activated. as shown in the following examples:
information on the next stop and on Note: to make the route bar more a remaining distance of 50 km on the
the final destination, or vice versa. readable, some traffic issues may not route bar is divided into 34 km (21
You can choose the information to be displayed. However, these would be miles) in the upper half and 16 km (9
display in the arrival information panel. minor issues which will only cause miles) in the lower half;
Read Chapter "Settings". short delays. a remaining distance of 10 km on the
The bar includes symbols that show the The route bar shows also status route bar is divided into 6.6 km (4
following information: messages, such as Find fastest route. miles) in the upper half and 3.3 km (2
the next two stopovers along the miles) in the lower half;
route; DISTANCES AND ROUTE The route bar is continuously updated
BAR while driving.
the next two Petrol stations along the
route; The travelling distance shown on the
TomTom Speed cameras and Danger route bar depends on the length of the NAVIGATION BUTTONS
areas. Read Chapter "Speed cameras" route or the remaining distance on
In the map display or navigation view,
and Chapter "Danger areas". the route.
tap the "Main menu" button to open the
You can choose the information about if the remaining distance exceeds menu.
the route to be displayed. 50 km (31 miles) only the next 50 km
The following navigation buttons are
(31 miles) are displayed. The destination
The symbols are shown in the order in available in the main menu:
icon is not displayed;
which they appear along the way. "Search": Select this button to
if the remaining distance is between search for an address, a place
Above the symbols, you can see the 10 km (6 miles) and 50 km (31 miles),
delay, expressed in minutes, caused by or a point of interest, then
the full distance is displayed. The plan a route toward the
accidents and other traffic issues along destination icon is displayed as fixed on
the route, including information location.
top of the route bar;
provided by the system.
36
"Current route": Select this Tap this button to return to the Tap this button to increase the
button to cancel or change the previous screen. screen brightness and display
planned route. Tap this button to return to the the map in brighter colours.
"Favourites": Select this button map display or navigation
to show the saved places. view. USING THE ACTIONS
For further information, see Tap this button to deactivate
Chapter "Favourites". voice instructions. You will To control Uconnect™ 5" Nav, use the
37
TRAFFIC 2. Traffic issue that concerns the
route in your direction. A symbol or a
ABOUT RDS-TMC number at the beginning of the issue
indicates its type or the delay in
The Traffic Message Channel (TMC), minutes, for example 11 minutes. The
also known as RDS-TMC, transmits colour of the issue indicates the traffic
traffic information as a radio signal and speed compared to the maximum
Uconnect™ 5" Nav LIVE
21 POPUPTRAFFIC
38
The displayed information includes: TRAFFIC ISSUES ADVANCED LANE
GUIDANCE
the type of accident: general, The map view and the route bar show
accident, roadworks, closed lanes or traffic issues and warnings. The NOTE: Lane guidance is not available
bad weather, for example a strong symbols shown in a circle are traffic for all road intersections or in all
storm or snow; issues. The system checks whether a countries.
the seriousness of the issue (slow faster route is available in order to The advance lane indicator helps you
recalculate your route in case of traffic
route.
Note: to make the route bar more Lane closed Tip: to close the lane image, select any
readable, some traffic issues may not point on the screen or press the Back
be displayed. However, these would be button.
Road closed
minor issues which will only cause
short delays.
39
To disable lane images, select the PLANNING A ROUTE USING THE SEARCH
Settings button from the main menu
and then select Appearance. Deselect Tap “Search in the Main menu” to start
SEARCHING FOR A the search. A search screen is
the setting Show preview of motorway DESTINATION
exits. displayed with the keyboard and the
The search function allows you to find following buttons:
and reach all kinds of places. You
Uconnect™ 5" Nav LIVE
40
Tip: if you hold down a letter on the In the town or city: Select 5. Button 123?!. Tap this button to
keyboard, you can access any available this option to use a town or a use numbers and symbols on the
additional characters. For example, city as the central point of keyboard. Tap button =\< to go from
hold down letter "e" to access the the search. You must enter the numbers to other symbols and vice
characters 3 e è é ê ë and others. name of the city or town using versa. To go back to the general
Tip: to change the text, select an the keyboard. When the city keyboard, tap button ABC;
already written word to place to cursor, is chosen from the list of 6. Keyboard layout button. Tap
41
The corresponding address and city are PLANNING A ROUTE - ZIP
displayed in the Address list and the CODE SEARCH
POI, the type of POIs and the locations
Important: in the interest of safety and
are displayed in the Point of Interest
to avoid distractions while driving, you
lists.
should always plan the route before you
start driving.
Uconnect™ 5" Nav LIVE
2. To plan a route towards the space and type the house number,
destination, select the "Guide" button for example "1017CT 35". For the other
Tip: to display more results, hide the countries, the zip codes are based on
. A route is planned and the
keyboard or scroll down the list of the area and provide a list of
indications to get to your destination
results. corresponding cities, countries and
start. When you start driving, the
Tip: you can choose whether the navigation view is displayed streets in the search results.
results are displayed on the map or in a automatically; Note: the search includes the entire
list by selecting the button list/map map. To change the search mode,
Tip: if the destination is in a different
. select the button on the right of the
time zone, the arrival information panel
1. If a result is selected, it is will show a plus (+) or a minus (-) sign search box. You can change the area in
displayed on the map. You can use the and the time difference in hours and which to search, for example, along
pop-up menu to add the location to half hours. The arrival time is in the the route or in a city. When you perform
"Favourites". If a route has already been destination local time. a search using a zip code, the results
planned, you can add the location to depend on the type of zip code used by
Tip: you can add a stopover to an the country in which you are searching.
the current route;
already planned route.
The type of zip codes used are the
following:
42
Zip codes that lead to a street or part This type of zip code is very useful to
of a street; reduce the number of search results. If,
Zip codes that lead to an area which for example, you search for Neustadt
may include, for example, a city, various in Germany, you will get a long list
towns in a rural area or a of possible results. Adding a space
neighbourhood in a big city. followed by the zip code for an area,
you can limit the results to the Neustadt
When a zip code is entered for an area, 2. Choose a city among those shown 3. Select the POI of the city centre.
you may obtain results regarding in the Address list. The location of the city centre is shown
multiple countries. on the map;
Note: if a search is performed using an
area zip code, the results will not
include a specific address.
43
PLANNING A ROUTE - 2. Select a POI category, for example
POI SEARCH "Restaurant" or a single POI, for
example "Cesare's pizzeria". If you
Important: in the interest of safety and
choose a POI category, only POIs from
to avoid distractions while driving, you
that category will show up. Now you
should always plan the route before you
can select a single POI. The location is
start driving.
shown on the map;
Uconnect™ 5" Nav LIVE
44
Legal services - Column for Museum Exhibition centre
Car rental
Other services electric car
Opera Cultural centre
Eating and Drinking Car rental Car repair
parking lots services Recreational
Nightclub
Fast food centre
Mini market Other services
restaurant
45
3. Enter the coordinates. You can Tip: if the destination is in a different
Bus station Service station enter any of the following types of time zone, the arrival information panel
coordinates: will show a plus (+) or a minus (-) sign
Column for – Decimal values, for example: N and the time difference in hours and
Tollbooth
electric car
51.51000 W 0.13454 or 51.51000 half hours. The arrival time is in the
Parking area Truck station -0.13454. Tip: for decimal values, destination local time.
you don't need to use a letter to Tip: you can add a stopover to an
Uconnect™ 5" Nav LIVE
Town Centre indicate latitude and longitude. For already planned route.
locations west of the Meridian 0
PLANNING A ROUTE - and for locations south of the
equator, use a minus sign (-) before PLANNING A ROUTE
SEARCH BY ENTERING USING A MAP
THE COORDINATES the coordinate.
– Degrees, minutes and seconds, for Important: in the interest of safety and
Important: in the interest of safety and example: N 51°30′31″ W 0°08′34″ to avoid distractions while driving, you
to avoid distractions while driving, you – Standard GPS coordinates, for should always plan the route before you
should always plan the route before you example: N 51 30.525 W 0 08.569. start driving.
start driving. Note: the bar below the
To plan a route using the map, access
To plan a route using a pair of coordinates turns red if the
the map display and proceed as
coordinates, access the search screen coordinates entered are not
follows:
and proceed as follows: recognized by Uconnect™ 5" Nav.
1. Move the map and zoom in the
1. Select the search type button on
display until the destination you want to
the right of the search box ; 4. Choose a suggestion for the
reach is displayed;
2. Select "Latitude Longitude"; destination. The location is shown on
the map; 2. Once the destination is found on
the map, select it by holding a finger on
5. To plan a route towards the
the screen for about a second. A
destination, select the "Guide" button
pop-up menu will be displayed,
. A route is planned and the
indicating the nearest address;
indications to get to your destination
start. When you start driving, the
navigation view is displayed
automatically.
46
Tip: you can use the selected location
in other ways, for example add it to
"Favourites" by selecting the button
from the pop-up menu.
Tip: if the destination is in a different
time zone, the arrival information panel
will show a plus (+) or a minus (-) sign
30 SELECTPOINT
time of your destination.
Tip: you can add a stopover to an
3. Select the location you wish to go
3. To plan a route towards the already planned route.
to, for example "Home". The selected
destination, select the "Guide" button location is shown on the map with a
. A route is planned and the PLANNING A ROUTE pop-up menu;
indications to get to your destination USING FAVOURITES
start. When you start driving, the
Important: in the interest of safety and
navigation view is displayed
to avoid distractions while driving, you
automatically.
should always plan the route before you
Tip: you can also select a map symbol start driving.
to open the pop-up menu, then select
To go to an item saved in Favourites
the "Guide" button to plan a route to
from the current position, proceed
reach that location.
as follows:
1. Select the "Main menu" button to
33 MELOCATION
open the corresponding menu ;
2. Select "Favourites" . A list of all
saved locations will be displayed; 4. To plan a route towards the
destination, select the "Guide" button
. A route is planned and the
indications to get to your destination
start. When you start driving, the
navigation view is displayed
31 PLACESSYMBOLS automatically.
47
Tip: if the destination is in a different
time zone, the arrival information panel
will show a plus (+) or a minus (-) sign
and the time difference in hours and
half hours. The arrival time is in the
destination local time.
Tip: you can add a stopover to an
Uconnect™ 5" Nav LIVE
SEARCHING FOR A
PARKING LOT
If a route has been planned, the parking To change the search mode, select the
Important: in the interest of safety and lots near the destination will be button on the right of the search box.
to avoid distractions while driving, you displayed on the map. If a route has not That way you can change the search
should always plan the route before you been planned, the parking lots near scope, for example near the current
start driving. the current position will be displayed on position or within the entire map.
To search for a parking lot, do the the map.
following: You can change the screen to display a
1. Select the "Main menu" button to list of the parking lots by pressing this
open the corresponding menu ; button .
2. Select "Parking lots" . The map You can select a parking lot from the list
with the discovered parking lots will to find it on the map.
be displayed; Tip: you can display the list of results
by using the scroll bar on the right
of the screen.
36 6J-SEARCHAREA
48
2. Select "Service station" . The
map with the discovered service
stations will be displayed;
4. To plan a route towards the If you want to change the search mode,
destination, select the "Guide" button select the button on the right of the
38 6J-PETROLSTATION
. A route is planned and the search box. That way you can change
indications to get to your destination the search scope, for example near
start. When you start driving, the If a route has been planned, the the current position or within the entire
navigation view is displayed available service stations will be map.
automatically. displayed on the map. If a route has not
been planned, the service stations
Tip: using the pop-up menu, you can
near the current position will be
add a parking lot as a stopover along
displayed on the map.
the route.
You can change the screen to display a
list of the service stations by pressing
SEARCHING FOR A
SERVICE STATION this button .
You can select a service station from
Important: in the interest of safety and the list to find it on the map.
to avoid distractions while driving, you
Tip: you can display all results using the 40 6J-PETROLSEARCH
should always plan the route before you
start driving. scroll bar on the right of the screen.
3. Select a service station from the
To search for a service station, proceed
map or list. A pop-up menu will appear
as follows:
on the map with the service station
1. Select the "Main menu" button to name;
open the corresponding menu ;
49
CHANGING YOUR Change type of route Select
ROUTE this button the change the
type of route used to plan the
CURRENT ROUTE MENU route. The route will be
recalculated using the new
If a route or a track has been planned, type of route.
click the button "Current route" in Reorder stopovers Select
Uconnect™ 5" Nav LIVE
the main menu to open the respective this button to display the list of
menu. stopovers for the current
41 6J-PETROLSELECT
route. You can change the
The following buttons are available in
the menu: order of the stopovers along
4. To plan a route towards the Delete route Select this the route.
destination, select the "Guide" button button to delete the currently Show route or track
. A route is planned and the planned route. The Current preview Select this button to
indications to get to your destination route menu will be closed and display a preview of the
start. When you start driving, the you will return to map display. planned route or track.
navigation view is displayed Stop route preview Select
Find alternative This button
automatically. this button to stop the preview
shows up when a route is
Tip: using the pop-up menu, you can planned. Select this button to of the planned route.
add a service station as a stopover show up to three alternative
along the route. The service stations set routes on the map display. SEARCHING FOR AN
as stopovers along the route are Avoid toll roads and others ALTERNATIVE ROUTE
indicated by a blue icon. Select this button to avoid
Important: in the interest of safety and
certain types of characteristics
to avoid distractions while driving, you
along the route you are
should always plan the route before you
planning. These characteristics
start driving.
include ferryboats, toll roads
and unpaved roads. To find an alternative route, do the
following:
1. Plan a route as usual;
2. Select the "Main menu" button to
open the corresponding menu;
50
3. Select "Current route", then select TYPES OF ROUTE Toll roads
Find alternative. You will see up to Ferries and car shuttle trains
three alternative routes on the map Select "Change type of route" to
display. Each alternative route shows change the type of planned route Carpool lanes
different travel times in a balloon; towards your current destination. The
Unpaved roads
route will be recalculated using the new
type of route. Note: carpool lanes are also known as
HOV lanes (High Occupancy Vehicle)
51
4. Select "Add to Current route" . SPEED CAMERAS the distance from the speed camera
The route will be recalculated to include is indicated on the route bar;
the stop. ABOUT SPEED CAMERAS a warning sound is played while you
approach the camera;
DELETING A STOPOVER The Speed camera service warns about
the locations of the following speed while you are approaching a camera
FROM THE ROUTE
cameras: or driving in an average speed check
1. In the main menu, select "Current
Uconnect™ 5" Nav LIVE
4. Use the down and up arrow to The warnings are played when you
change the order of the stopovers. The approach a speed camera and there
route is recalculated with the stopovers are different types of them:
in the changed order. a symbol displayed on the route bar
and on the route on the map;
52
Symbol on the map Symbol on the route bar Description
53
Symbol on the map Symbol on the route bar Description
Accident black spot: this type of warning
is shown in areas with a high percentage of
road accidents. You will be warned at the
beginning and end of the accident black
spot. The current speed is displayed while
driving in an accident black spot. Visual
Uconnect™ 5" Nav LIVE
54
CHANGING THE WAY YOU Tip: to deactivate all sound warnings, DANGER AREAS
ARE WARNED select "Settings", "Sounds and
To change the way you receive warnings", then deselect "Warning INFORMATION ABOUT
speed camera warnings, sounds". DANGER AREAS AND
select the button "Sounds and RISK AREAS
warnings" from the "Settings"
menu. If you are in France, the "Danger areas"
service signals danger areas and risk
55
specific locations are not available while you are approaching an area of
but when you approach a danger area, this type or driving in the area, the
the corresponding icon is displayed; speed is being monitored. If you are
the minimum length of the danger driving at more than 5 km/h (3
areas varies depending on the type of miles/hour) above the speed limit, the
road: 300 metres for roads in built-up route bar turns red. If you are driving at
areas, 2 km for secondary roads and less than 5 km/h (3 miles/hour) above
Uconnect™ 5" Nav LIVE
WARNINGS ABOUT
DANGER AREAS AND
RISK AREAS
56
The warning sounds are played for these types of areas:
To change the signalling methods for danger and risk areas, select "Sounds and warnings" from the "Settings" menu.
57
CHANGE THE WAY YOU FAVOURITES
ARE WARNED
To change the way you receive ABOUT FAVOURITES
speed camera warnings,
select the button "Sounds and The "Favourites" section is a simple
warnings" from the "Settings" way to select a location without having
menu. to search for it every time. You can
Uconnect™ 5" Nav LIVE
3. Select "Danger areas"; Recent destination: click this To select a "Home" location, do one of
button to select your destination from a the following:
4. Select whether you always want to
list of places you have recently used
be warned or warned only when you enlarge the map location you want to
as destinations. It includes stops.
are speeding. Select "Never" to turn off select. Hold down to select the
the warning; You can add a location to "My location then click on the home location
locations" directly from "My locations" symbol;
5. Click the "Back" button.
by selecting a location from the map,
Tip: to deactivate all sound warnings, searching for a location or marking
select "Settings", "Sounds and a location.
warnings", then deselect "Warning
The home location, marked locations
sounds".
and added locations are shown in a list
in "Favourites" and marked by an
indicator on the map. 44 6J-LOCATION
58
click the "Search" button and search 4. To select a new home location, do 4. Change the name of the location
for a location. Select a location to set one of the following: to recognize it easily;
it as Home. Select "Set home". – Enlarge the map location you want 5. Select "Done" to save the location
to select. Hold down to select the in the Favourites list.
CHANGING THE HOME location then click on the home
LOCATION location symbol
– Select the "Search" button and ADD A LOCATION FROM
THE MAP TO
59
6. Select "Done" to save the location 1. Make sure that the current SETTINGS
in the Favourites list. The added position is the location you want to
location is shown on the map by a mark; APPEARANCE
marker. 2. Select the current location symbol Select "Settings" in the main
or the speed panel in navigation view menu, then click on
ADDING A LOCATION TO to mark a location. Once marked, "Appearance".
FAVOURITES USING the location is saved in "Favourites".
Uconnect™ 5" Nav LIVE
60
SHOW ON ROUTE AUTOZOOM Read the instructions in advance
Select "Settings" in the main out loud. For example, if this setting
You can choose to show the following is enabled, you can hear the
menu, then click on
items on the route bar: instructions in advance, such as "In
"Appearance".
Parking lots. Select this setting to 2 km, take the exit on the right" or
show parking lots; Select "Autozoom" to change the "Further ahead, turn left".
Service stations. Select this option settings of this navigation view function
61
Shortest route: the shortest From this screen, you can change the SAFETY WARNINGS
distance between the locations you set. settings of sounds and warnings. Select "Settings" in the main
This may not be the fastest route, menu, then click on "Sounds
especially if the shortest route is TYPE OF WARNING and warnings".
through a city centre;
Most ecological route - the most You can choose the type of sound Select "Safety warnings". You can set
fuel-efficient route for your journey; warning you want to receive while the reporting method by types of
Uconnect™ 5" Nav LIVE
62
You can restore the system from this HELP APPENDIX
screen: Select "Help" from the "Main
Restore. Select this option to delete menu" or from the "Settings" SAFETY INFORMATION
all settings and saved places and menu. AND IMPORTANT
restore the original settings of NOTICES
the Uconnect™ 5" Nav device. This The following settings are available on
Safety messages
includes language, item, warning and this screen.
63
Special attention has been paid in the IMPORTANT The software included in this product is
preparation of this document. Due INFORMATION ON protected by copyright and its use is
to the continual product development, COPYRIGHTS authorised according to a LPG. A copy
some information may not be of the license is available in the License
completely up to date. The information © 2015 TomTom. All rights reserved. section. After the product has been
in this document is subject to change TomTom and the "two hands" logo are sent, the relevant source code can be
without notice. registered trademarks owned by requested within three years. For further
Uconnect™ 5" Nav LIVE
64
VOICE COMMANDS to guarantee correct operation of the tune to a specific AF/FM radio
voice commands for the connected frequency;
USE OF THE VOICE mobile phone, make sure that the play a track on a USB storage
COMMANDS phonebook has been completely device/iPod/MP3;
downloaded (or updated) by the
Please follow the suggestions below to Uconnect™ system: usually 5-10 play an album on a USB storage
be sure that the voice commands are seconds after pairing the phone with device/iPod/MP3;
65
VOICE SESSION STATUS of four alternatives.
MULTIPLE CHOICE
66
GLOBAL VOICE COMMANDS
Note: For languages not supported by the system, voice commands are not available.
67
PHONE VOICE COMMANDS
50 11086J0008EM
68
51
11086J0009EM
69
52
11086J0010EM
53
11086J0011EM
71
54
F1B2027C
Uconnect™ 5" Nav LIVE
55 F1B2028C
Note: If the name and surname fields have special characters of languages not supported by the system (e.g. Greek) the voice
commands will not be available.
73
RADIO AM/FM/DAB VOICE COMMANDS
56 F1B1565C
74
57
F1B1566C
75
58 F1B1567C
76
59
11086J0012EM
77
60 11086J0013EM
Note: If the fields indicated at point 10 have special characters of languages not supported by the system (e.g. Greek) the
voice commands will not be available.
78
NAVIGATION VOICE COMMANDS
79
CUSTOMER SERVICE NUMBER LIST
The following table shows the specific Customer Service numbers for each country.
00800.3428.0000
Belgium This number is not available for 0800.55111 +39.02.444.12.041
some mobile system operators.
00800.3428.0000
Denmark This number is not available for 80.60.88.00 +39.02.444.12.041
some mobile system operators.
France 00800.3428.0000 0800.3428.00 +39.02.444.12.041
Germany 00800.3428.0000 0800.3428.000 +39.02.444.12.041
800.11500.800
Greece This number is not available for +30 210 99 88 542
some mobile system operators.
Ireland 00800.3428.0000 1800.3428.00 +39.02.444.12.041
Italy 00800.3428.0000 800.3428.00 +39.02.444.12.041
00800.3428.0000
Luxembourg This number is not available for 800.28111
some mobile system operators.
Morocco 0801000005
Netherlands 00800.3428.0000 +39.02.444.12.041
Poland 00800.3428.0000 +39.02.444.12.041
Portugal 00800.3428.0000 +39.02.444.12.041
United Kingdom 00800.3428.0000 +39.02.444.12.041
Spain 00800.3428.0000 900.3428.00 +39.02.444.12.041
80
Country Universal Freephone Number National Freephone Number Toll number
00800.3428.0000
Sweden This number is not available for 020100502 +39.02.444.12.041
some mobile system operators.
Switzerland 00800.3428.0000 +39.02.444.12.041
81
REGULATORY INFORMATION
62 J0A0910
82
Uconnect™ 5" Nav LIVE
63 J0A0911
83
Uconnect™ 5" Nav LIVE
84
COP TIPO UConnect 3 Radio GB.qxp 14/10/15 09:59 Pagina 1
T I P O 4 D O O R S
ENGLISH
The data contained in this publication is intended merely as a guide. Fiat Chrysler Automobiles reserves the right to modify 3” Radio
the models and versions described in this booklet at any time for technical and commercial reasons.
If you have any further questions please consult your FIAT dealer.
Printed in recycled paper without chlorine.