DRAWING FOR MOTORIZED BICYCLE BRAKE SYSTEM
MOTORIZED BICYCLE BRAKE SYSTEM
SNO] _PARTNAME IENO| PART NAME SNO| PART NAME
= ieee eel ante [OR commer oT
WORKING PRINCIPLE
This project consists of motor, break pad, limit switch and control unit. The fixed
break pad is connected in the one side of disc break and another side a motor with
rotating break pad is fixed. Then the limit switch is fixed in the break lever. When we
press the break lever the limit switch activate and sends signal to the control unit. Then
the transmitter transmits the signal to the receiver. When the receiver receives signal
from the transmitter it will switch ON the motor. Then motor rotates the break pad and
the wheel gets stopped.MOTORIZED BICYCLE BRAKE SYSTEM
SYNOPSIS:
The objective of this project is to break the vehicle by wireless control. This
section discusses the principal aspects of a wireless cycle brake, as an example of a
safety critical wireless sensor network system that, despite making use of wireless
communication. We consider a cycle brake, where the communication between the
brake handle and the brake shoe is wireless. The wireless design has led us to use a
number of components, the receiver, and transmitter, motor and break pad.
BLOCK DIAGRAM:
Leo
Display
I
j_
| Driver
Lt circuit FH Relay
por
Micro Moar
Controller For Brak, BOT,
Driver
[Circuit [-}ReleyMERITS
> Simple and efficient.
> Less expensive.
> Avoid break failure.
DEMERITS
> It requires separate electrical power to operate this breaking.
APPLICATIONS
> Applicable in all types of bicycles.