Professional Documents
Culture Documents
ABS
4. Measure the voltage between the ABS fail-safe relay connector terminal No. 1 and body ground.
Is there battery voltage?
YES - Go to step 5.
NO - Repair open in the wire between the underhood fuse/relay box and the ABS fail-safe relay.
https://my.alldata.com/repair/#/repair/article/38017/component/3926/itype/425/nonstandard/1545262/selfRefLink/true 1/6
10/3/2019 ABS (ALL Diagnostic Trouble Codes ( DTC )) - ALLDATA Repair
5. Connect ABS fail-safe relay connector terminal No. 1 to No. 2 with a jumper wire.
6. Disconnect the modulator unit connector.
https://my.alldata.com/repair/#/repair/article/38017/component/3926/itype/425/nonstandard/1545262/selfRefLink/true 2/6
10/3/2019 ABS (ALL Diagnostic Trouble Codes ( DTC )) - ALLDATA Repair
9. Measure the voltage between modulator unit connector terminal No. 2 and body ground.
Is there battery voltage?
YES - Repair short to power in the wire between the ABS fail-safe relay, TCS relay, modulator unit, and under-hood
ABS relay box.
NO - Go to step 10.
10. Disconnect ABS/TCS control unit connector A (26P).
11. Turn the ignition switch ON (II).
https://my.alldata.com/repair/#/repair/article/38017/component/3926/itype/425/nonstandard/1545262/selfRefLink/true 3/6
10/3/2019 ABS (ALL Diagnostic Trouble Codes ( DTC )) - ALLDATA Repair
13. Check for continuity between ABS/TCS control unit connector A (26P) terminal No. 25 and body ground.
Is there continuity?
YES - Repair short to body ground in the wire between the ABS/TCS control unit and the ABS fail-safe relay.
NO - Go to step 14.
14. Check for continuity between ABS fail-safe relay connector terminal No. 3 and body ground.
Is there continuity?
YES - Go to step 15.
NO - Check for an open in the wire between the ABS fail-safe relay and body ground. If the wire is OK, check for
poor ground at G201.
https://my.alldata.com/repair/#/repair/article/38017/component/3926/itype/425/nonstandard/1545262/selfRefLink/true 4/6
10/3/2019 ABS (ALL Diagnostic Trouble Codes ( DTC )) - ALLDATA Repair
15. Connect ABS fail-safe relay connector terminals No. 3 and No. 4 with a jumper wire.
16. Check for continuity between ABS/TCS control unit connector A (26P) terminal No. 25 and body ground.
Is there continuity?
YES - If the problem recurs, replace the ABS/TCS control unites
NO - Repair open in the wire between the ABS/TCS control unit and the ABS fail-safe relay.
https://my.alldata.com/repair/#/repair/article/38017/component/3926/itype/425/nonstandard/1545262/selfRefLink/true 5/6
10/3/2019 ABS (ALL Diagnostic Trouble Codes ( DTC )) - ALLDATA Repair
https://my.alldata.com/repair/#/repair/article/38017/component/3926/itype/425/nonstandard/1545262/selfRefLink/true 6/6