Re] ere MLL rata
MODEL Pere
@Standard Dimensions
MBushingmount type
‘Model 22HHP-10
(Bushingmount)
‘Note:Dimensions of sha
Pan
cae
ft and bushing are equal to those of model
22HP series with whewound restive element and please refer
to those dimensions and noes,
lServomount type (bronze bearing incoperated)
‘Model 22HHPS-10
(Servomount)
Standard Model Nos.
Bushingmount type:
Sctum models: 22HHP-5 _22HHP-5M
22HHP-5E —D2HHP-SN
10-turn models: 22HHP-10 22HHP-10M
22HHP-10E 22HHP-10N,
‘Servomount ty
Scum models: 22HHPS-5
10-turn models: 22HHPS-10
@General Specifications
Standard Resistance
Values
41k,2k,5k,10k,20k,0k (02) (5-urn)
2k 8k, 10%,20k, 60%, 100k (£2)(10-turm)
Total Resistance
Tolerance Standard Class ++10% (K)
Precision Class +5% (J)
Independent Linearity
Tolerance:
Standard Class £0.35% 0.2596
Precision Class-t0.2% 0.1%
Essential infinite
Below 0.05% against input voltage
urn)
Below 0.015% against input voltage
Gown)
Resolution:
Output Smoothness:
@Special Specifications Available
Contact Resistance
Variation:
Power Rating:
Electrical Travel:
Mechanical Travel:
Ingulation Resistance:
Dielectric Strength:
Starting Torque:
Max. Torque exerted on
fastening the mounting
nut to the bushing:
Bolow 5% C.RLV. (Sturn)
Below 3% C.RLV. (10-turn)
1.0W (6-turn)
2.OW (10-tumn)
360" x n +5" (n: No, of turns)
+10;
Sh4n No. of turns)
360°xn
‘Over 100M at 1,090V.0.c
+ minute at 1,000V.A.C.
Below SmNm (S0gf-cm)
‘Approx. 0.9N-m (&kgf-em)
500V
£100p.pm/C
Below 1.0N-m (10kgt-em)
(In case of panel thickness with
‘over 2.5mm. the rotating torque
may become heavier.)
‘Approx. 20g (Bushingmount)
‘Approx. 30g (Servomount)
(Both S-tum and 10-urn)
Shaft with front and rear extension (Rear shaft with 6mm dia. and 15mm length), 3-turn type, Mult-ganged (Available
up to 10 gangs), With high torque, Special shatt dia. (3mm, ¢3.175mm, 44mm, 6.5mm), Special machining on
the shaft, With plastic shatt, Metal bushing type (22HHPM with ant-rotation pin), Simple sealed housing, Extra taps
(Available up to 1 tap only for 10-turn), Stipping-clutch incorporated type.