Jalan Palem F 10-11
‘Taman Bukit Lagadar, Margaasih
Kab. Bandung 40216
Email: info@beta-uas.id
FLIGHT INFORMATION
Pilot name
a }
Funes
Assisting operators
el hata
Registration number
Date of flight
\4- 63 - logale
Site location
Yrambanan , Semen , Dit |
Drone model name
DIL hone 4 + Maylk camre
Drone ID
Drone weight
Purpose of flight
Lond & Vegeraher Menuhry,
Dates...
cen lof 5Jalan PalemF 10-11
Taman Bukit te Lagadar, Mrgaasih
Bandung 40216
cn info@beta-uas.id
at
BEA |
PRE-FLIGHT CHECKLIST
Se
item
LN ataid VALUE LIN
ENVIRONMENT CONDITION
Weather condition |
Temperature |
Home altitude | £ why,
Wind speed ms
Wind direction |
Take-off and landing area
UAS PREPARATION (VISUAL CHECK)
Wing and spar tube | Check for cracks
Fuselage for cracks
Airborne system ck for any damages
Motor and Propeller Vv Tigt fier stom cae
‘Assembly UAS airframe
BATTERY PREPARATION
Main battery level CP,
Main battery voltage
Wireless telemetry battery level ERG:
Remote control battery voltage
GCS battery level
felfelO Noes
GCS positioned properly ‘eo
‘Sotup telemetry tripod on level ground
Attach wireless telemetry to tripod uM
Wireless telemetry antennas are positioned -
in V-shaped
Pilot,
Date:Jalan Palem F 10-11
Am, ‘Taman Bukit Lagadar, Margaasih
S Kab. Bandung 40216
BETA Email:info@beta-uas.id
Setup base GPS tripod on level ground v if benchmark available
Attach base GPS to tripod using extension}
pole
Base GPS positioned is leveled and centered
Base GPS is set on application (if required) ‘Set on ReachView 3 app
Vv
Remote control antenna attached
GCS software workit er
CSTW
Camera type
Connect camera to UAS system
FINAL PREPARATION
UAV tilt motor propellers placed horizontally
or the
Camera SD card plugged WG
Camera lens cover is opened MA
Camera lens are cleaned properly v
Open the canopy and install the camera. WA
| Tighten the camera to the mounting system v Tighten the Velcro
v ject the power and
Calibrating compass and reboot UAS
Mission upload
Clear the latest mission
Remove airspeed cover
‘Turn on GCS and wireless ground telemetry Me
the UAS should | stop
Turn on remote control and UAS Ma beeping if initialization is
successful
Attach the airframe canopy v
QGroundControl connected a
v
v
v
Calibrating camera (if required)
= Set CRP on ground
- Hold the UAS 1 m above CRP and point
the camera to CRP
= Open the web interface, press QR
Until no beep sound,
Pilot,
op
Mh |
Cc | Ay )
30f5alm
Bet A
Jalan Palem F 10-11
‘Taman Bukit Lagadar, Margaasih
Kab. Bandung 40216
Email: info@beta-uas.id
Battery Indicator at GCS checked
GPS satellite are 3D FIX
>8 Satellites; HDOP<1
IMU indicator checked
Compass indicator checked
Check UAS direction
Airspeed working correctly
£20
uw
v
Stabilize respond properly
Check remote control mode Check on GCS
UAS direction to headwind
Motor working properly Check when arming UAS
Pilot, adler, i
q
Bye )
Date:..
40f5Jalan Palem F 10-11
‘Taman Bukit Lagadar, Margaasih
Kab. Bandung 40216
Email: info@beta-uas.id
ema tcnimey seer
SE
coon
aay ans Sc)
CAMERA CALIBRATION
Set CRP on ground and point it to camera
POST-FLIGHT
Disconnect GCS communication
Power off the UAS |
Power off the remote control
Power off the wireless telemetry
Disassembly the UAS vw
Disassembly the Reach RS2
Ue ue UUAmer erg)
Wing
Fuselage vw
Spar tube | vw
Airborne system | v
Motor and propeller | wi
Wd
Distance travelled
Time in Air e-[s me
Main battery level EG)
Main battery voltage
De 59) ed
Import photos from memory _ Va
Reach RS2 and M2 data extracted
Pilot,
Date: | an