Jalan Palem F 10-11
ay Taman Bukit Lagadar, Margaasih
Kab. Bandung 40216
Be 1A Email: info@beta-uas.id
FLIGHT INFORMATION
Pilot name
Ivan Luther.
Assisting operators
suum (M- Bara
Registration number
Date of flight
\g - 0B-| 9022
Site location
Rrambanan, Suman, DIA.
Drone model name
OYE vhavtom 4X Malki syeuta]
Drone ID
Drone weight
Purpose of flight
Lenk A Vee kehee Mentoring
a TofS| Jalan Palem F 10-11
Taman Bukit Lagadar, Margaasih
os Kab. Bandung 40216
BETA :
&
7
info@beta-uas.id
Seaman sani
Cee eee aa
Baa Cae ae REMARKS
ENVIRONMENT CONDITION
Weather condition Cloud 4-
Temperature 2o°d |
Home altitude
Wind speed ae
Wind direction |
‘Take-off and landing area
UAS PREPARATION (VISUAL CHECK)
Wing and spar tube Chepk for cracks,
Fuselage Check for cracks.
Airborne system Mv Check for any damages_|
Tighten spinner and
check for any damages
Assembly UAS airframe
YARIS Aang Geno)
Motor and Propelle! Me
Main battery level ea Use battery checker
Main battery voltage Us® battery checker
Wireless telemetry battery level \gO__%
Remote control battery voltage
GCS battery level (OO _%| Minimum 4 hour
Attached main batte Tighten the Velcro
GROUND PREPARATION
V Place on top of table if
GCS positioned properly mane
‘Setup telemetry tripod on level ground vw
‘Attach wireless telemetry to tripod Vv
Wireless telemetry antennas are positioned vA
in V-shaped 1
Pilot, Assistant,
( ) ( )
Date: am | 2of5Atm
Jalan Palem F 10-11
Taman Bukit Lagadar, Margaasih
- Kab. Bandung 40216
BeTA i
Setup base GPS tripod on level ground Me If benchmark available
Attach base GPS to tripod using extension ee
pole } >
Base GPS positioned is leveled and centered
Base GPS is set on application (if required) | DJ 6S¥F0 _| Set on ReachView 3 app
Remote control antenna attached A
GCS software workin: ri Mo
Camera type mult So '
Camera SD card plugged M
Camera lens cover is opened Ss
Camera lens are cleaned properly v
Open the canopy and install the camera. %
Tighten the camera to the mounting system cA Tighten the Velera
WA Connect the power and
Connect camera to UAS system
UAV tilt motor propellers placed horizontally.
DLS cable
GaN Nehiantaie AON
‘Tum on GCS and wireless ground telemetry
‘Tum on remote control and UAS.
the UAS should stop
beeping if initialization is
successful
Attach the airframe canopy
QGroundGontrol connected
Calibrating compass and reboot UAS
Mission upload
Clear the latest mission
Remove airspeed cover
Calibrating camera (if required)
SIS) SSIS] < |
~ Set CRP on ground
- Hold the UAS 1 m above CRP and point
the camera to GRP.
= Open the web interface, press OR
Until no beep sound
Pilot,
Assistant,
30f5Jalan Palem F 10-11
‘Taman Bukit Lagadar, Margaasih
Kab. Bandung 40216
BETA Email: info@beta-uas.id
Battery Indicator at GCS checked wv
GPS satellite are 3D FIX 4ue >8 satellites; HDOP<1
IMU indicator checked Ma
Compass indicator checked Y Check UAS direction
Airspeed working correctly ee
Stabilize respond properly Se
Check remote control mode Mc Check on GCS
UAS direction to headwind Via
Motor working properly ew ‘Check when arming UAS.
Pilot, Assistant,
( wean UH.)
)
Date:
40f5Jalan Palem 10-11
‘Taman Bukit Lagadar, Margaasin
Kab. Bandung 40216
“Email: info@beta-uas.id
ese a mnie eas
EEE
Naty Dee REMARKS
CTS ethan
‘Set CRP on ground and point it to camera Camera 1 rh above CRP
ce, press OR
Disconnect GCS communication Me
Power off the UAS
Power off the remote control Va |
Power off the wireless telemetry Vv,
Disassembly the UAS
isassembly the
UAS CONDITION ('
wing howd
Fuselage Gov 4
Spar tube tod
Airbome system owd
Motor and propel! cod
ie asd
Distance travelled eauiicn
Time in Air AS =A,
Main battery level eo %
Main ba voltage
Pw e
Import photos fror
Reach RS2 and M2 data extracted Ve
Pilot, Assistant,
( evan UH,
a eee