Professional Documents
Culture Documents
Interfaces
Section Qty.. Cond. Min Typ. Max Unit Comment
18 24 32 VDC
Power Supply, Vcc 2 Current consumption @24 VDC
- 0.5 2 A
Low = 0-2 V
Switch Inputs 8 - 24 - VDC Opto-coupled
High = 12-32 V
4-20 mA Inputs 4 0 4-20 22 mA Accuracy: +/- 0.5 %.
Accuracy: +/- 2.0 %.
PT100 Inputs 4 0 - 800 °C
With optional wire resistance comp
- Vcc-0.5 - V Power supply - 0.5 V
Switch Outputs 12
0 - 0.2 A Current limited
Crank Output 1 0 - 1.8 A Internally fused.
Potential free/Form C contacts.
Config. Relay Outputs 2 0 - 1 A
Internally fused.
0.1 5 10 kHz
Tacho/MPU 1 Magnetic pickup sensor
4 32 32 Vpp
CAN bus #1 1 - 250 - kbps SAE J1939
CAN bus #2 1 - 250 - kbps SAE J1939
Ethernet / Modbus TCP 1 - 10 / 100 - Mbps Auto Crossover
Modbus RTU 1 9600 19 200 115200 baud 8 bit, even parity, 1 stop bit.
1 8 bit, even parity, 1 stop bit
RIO Link Connection - 19 200 - baud
Failsafe biasing, internal termination
1 8 bit, even parity, 1 stop bit
SDU Link Connection - 19 200 - Baud
Failsafe biasing, internal termination
USB Port 1 - - 480 Mbps USB 2.0 Hi-speed Memory Interface
Relay Expansion 1 - - - - For MK-14 Relay Expansion
- Vcc-0.5 - V
24 V Supply Output 1 Current limited
0 - 1 A
4.8 5.0 5.2 V For supply of 0-5 V sensors etc.
5 V Supply Output 1
0 - 0.1 A Current limited
Connectors
● A total of 100 pin screw fastened terminal headers, 5.08 mm
● USB 2.0 Type A Host Port (Service only)
● Ethernet RJ45 with 2 status LEDs.
● Auto-Maskin MK-14 connector for relay expansion
Environmental
Section Condition Min. Typ. Max. Unit Comment
Operating Temperature Operational +5 - +70 °C
Storage Temperature Not powered -30 - +80 °C
Enclosure Ingress
Operational IP56 - - - Front panel (DCU 410E only)
Protection Rating
IEC 60068-2-6 - Sine Sweep
3 25 Hz
1.6 mm Displacement
Vibration Operational
IEC 60068-2-6 - Sine Sweep
25 100 Hz
4.0 g Acceleration
Type approved. See Auto-Maskin web page for type approval certificates.
Validity of Information
Data valid at revision date. Auto-Maskin reserves the right to make improvements and changes of specification at any time.