hacksaw is shown j,
in the blade shoulg
le of plain carbon steg|
Scanned By Camera ScannerThe frame of a hydraulic press
“Zonsisting of two identical steel plates is shown in
Fig. 4.20. The maximum force P acting on the frame is
20 kN. The plates are made of steel 45C8 with tensile
yield strength of 380 N/mm2. The factor of safety is
2.5, Determine the plate thickness.
[S] [LO 2]
Solution :
Given P=20KN Sy, =380 N/mm’
(&) =2.5
Step I: Calculation of issi
erm i
; tis plates permissible tensile
Sve
thoi =
Canis 152N / mm?
@)
Scanned By Camera ScannerFigure 4.22 shows a C-clamp, which
rries a load P of 25 KN. The cross-section of the
clamp is rectangular and the ratio of width to thickness
(b/t) is 2:1. The clamp is made of cast steel of Grade
20-40 (S,, = 400 N/mm?) and the factor of safety is 4.
Determine the dimensions of the cross-section of the
clamp. [M] [LO 2]
Solution
Given P=25kN e=140mm
Su = 400 N/mm? — (fs) = 4 (b/t) = 2
i 140 ee
a4
‘i -yv
‘ y»
Pp
Scanned By Camera Scanner