we
Number
Chapiee
SSR Tem
Number
Reference
Number
Description of the em
‘Additonal
Specification
Tait
Proposed
Completed
Rate for 2020-
21 excluding
GST
In Rs
Proposed
Labour
Rate for
2020.21
excluding
‘cst
307
Caling and
roofing
‘Ar dneted by
Engineer in
charge
[ACOUSTICAL WALL PANELING FABRIC WRAPPED OF Siz
Js00xs00/1200x25qM
providing and Fixing of Acoustical Wall Panel with square edges made of fibre glass
subsrae 25mm thick. wreppe on the front side with an acoustically transparent fri us pet
ne approved shade (Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame
Peanut and She). The panel shall be clasitid for Fre Class A, as pee ASTM E84. The
| Acoustical Wal Panel shall be of sizes 600x600mm (Nominal) or 600x1200cum (Nomina)
and shall achieve an NRC of 0.85 (Average value of Absorption Co-fficent readings taken
st 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) with mm airgap as pr ASTM C23 to be fixed
to wall ona fumework of wooden battens and using Wall pans! Impales (supplied by the
manufsctre) or by using construction adhesives (as per the ineretons laid down by the
manufacturer) The fibreglass substrate shal havea recycle content of 85%,
nstalatin:An appropriate vapour bari (by others) shall be appliednsalled on the vertical
surface before the installation to properly seal aginst enty of any moisture. Vapour barrier,
fey oxhers) shall be installed as per Manufacturer's recommendation. Install wooden batten
esd (provided by others) of section S0aS0mm ores approved by the Arhitsct onthe said
walparition to prove level and plumb surface. The Impalers shall be fixed tothe bateas
sing seletapping seems, 3 nos im cate of 6O0x6Umm and 4 ns, in case of 60! 200n
Sia based constuction adhesive (by other) to be dabbed on tothe projecting clmsens
Re dresed by
Engineer in
charge
Square
Metre
7
TF
Calingaad
‘roofing
sass
‘Ar decal by
Engineer in
charge
ICHANNELLED WALL PANELING OF SIZE: 192X2S00X15MM
Providing and Fixing Channeled porforted pancls of width 192mm, thicknes of 1Smm and
lengih 2400 mn, made of « Mostre resistant ire bosnd substrate with laminated facing ae
ler he approved shade (Portland Maple, See Ree, Siam Wood & Mystique Walnut, Interior
White, Aumine Pear!) and a melamine balancing layer onthe reverse side. Tho boards shal
lave a special pecfration pattem where the reverse surface has a "Helmbelt2™ Cured
pcrforaion with consecutive 3mm wide groove followed by 15mm or 21mm of visible pane
[G-13/ G-21), The eiges ofthe panel shall be “Yongue-and-grooved” to fx spoval clip for
installation and seamless visual. The back ofthe perforate pane shal have sound absorbing
non-woven Soundtex aovsticel eee hot pressed to achieve NRC of 5. for G-21 and 0.5
ar G-13. (Average vale of Absorption Co-tiient readings taken a 250 Hz, 500 Ha, 1000,
2 and 2000 Hz) as per ASTM C423 and Humidity Resistance (RH) of 70% with camber
ims ess han Ln/1000num snd bow less than Lmmy300mum, The panel shall be mounted on
special aluminium spines (kee) using inside clips provided by Manuficturer and approved
by the Archie’ nginceria-Chare.
Ae dete by
Engincerin
charge
Su
Metre
Page 400