Professional Documents
Culture Documents
Cree LED / 4400 Silicon Drive / Durham, NC 27703 USA / +1.919.313.5330 / www.cree-led.com
1
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
TABLE OF CONTENTS
Characteristics........................................................................................................................................................................................................ 3
Order Codes Suggested for New Designs - White................................................................................................................................................ 4
Order Codes Suggested for New Designs - Color................................................................................................................................................. 9
Relative Spectral Power Distribution................................................................................................................................................................... 13
Relative Flux vs. Junction Temperature............................................................................................................................................................... 14
Electrical Characteristics...................................................................................................................................................................................... 15
Relative Flux vs. Current....................................................................................................................................................................................... 16
Relative Chromaticity vs. Current and Temperature........................................................................................................................................... 18
Typical Spatial Distribution................................................................................................................................................................................... 19
Thermal Design..................................................................................................................................................................................................... 20
Performance Groups - Luminous Flux................................................................................................................................................................. 21
Performance Groups - Radiant Flux..................................................................................................................................................................... 21
Performance Groups - Chromaticity.................................................................................................................................................................... 22
Performance Groups - Dominant Wavelength.................................................................................................................................................... 26
Performance Groups - Peak Wavelength............................................................................................................................................................ 26
Performance Groups - Forward Voltage.............................................................................................................................................................. 27
Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions..................................................................................................... 28
Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions.............................................................................. 29
Standard Chromaticity Kits.................................................................................................................................................................................. 31
Bin and Order Code Formats................................................................................................................................................................................ 32
Reflow Soldering Characteristics......................................................................................................................................................................... 33
Notes..................................................................................................................................................................................................................... 34
Mechanical Dimensions....................................................................................................................................................................................... 36
Tape and Reel........................................................................................................................................................................................................ 38
Packaging.............................................................................................................................................................................................................. 40
Appendix - Order Codes Not For New Designs................................................................................................................................................... 41
2
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
CHARACTERISTICS
Thermal resistance, junction to solder point - red-orange, red, HE photo red °C/W 6.5
Viewing angle (FWHM) - blue, green, amber, red-orange, red, HE photo red degrees 130
Reverse voltage V 1
Forward voltage (@ 350 mA) - amber, red-orange, red, HE photo red V 2.1 2.5
Note
• Thermal resistance measurement was performed per the JEDEC JESD51-14 standard.
3
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
The following table provides order codes for XLamp XP-E white LEDs. For a complete description of the order code nomenclature, please
see the Bin and Order Code Formats section (page 32).
WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP XPEWHT-L1-0000-00J01
S2 148 WC, WD, WF, WG XPEWHT-L1-0000-00J02
WC, WD, WF, WG, WH, WJ, WN, WP XPEWHT-L1-0000-00J03
WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP XPEWHT-L1-0000-00K01
S3 156 WC, WD, WF, WG XPEWHT-L1-0000-00K02
WC, WD, WF, WG, WH, WJ, WN, WP XPEWHT-L1-0000-00K03
WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP XPEWHT-L1-0000-00L01
S4 164 WC, WD, WF, WG XPEWHT-L1-0000-00L02
WC, WD, WF, WG, WH, WJ, WN, WP XPEWHT-L1-0000-00L03
Notes:
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 34).
• XLamp XP-E LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
4
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
The following tables provide order codes for XLamp XP-E white LEDs. For a complete description of the order code nomenclature, please
see the Bin and Order Code Formats section (page 32). For definitions of the chromaticity kits, please see the Standard Chromaticity
Kits section (page 31).
Minimum Luminous
Chromaticity Order Codes
Flux (lm) @ 350 mA
S4 164 XPEWHT-L1-0000-00L51
51 6200 K S3 156 XPEWHT-L1-0000-00K51
S2 148 XPEWHT-L1-0000-00J51
S4 164 XPEWHT-L1-0000-00L53
53 6000 K S3 156 XPEWHT-L1-0000-00K53
S2 148 XPEWHT-L1-0000-00J53
S4 164 XPEWHT-L1-0000-00L50
50 6200 K S3 156 XPEWHT-L1-0000-00K50
S2 148 XPEWHT-L1-0000-00J50
S4 164 XPEWHT-L1-0000-00LE1
E1 6500 K S3 156 XPEWHT-L1-0000-00KE1
S2 148 XPEWHT-L1-0000-00JE1
S4 164 XPEWHT-L1-0000-00LE2
E2 5700 K S3 156 XPEWHT-L1-0000-00KE2
S2 148 XPEWHT-L1-0000-00JE2
Notes:
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 34).
• XLamp XP-E LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
5
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
Minimum Luminous
Chromaticity Order Codes
Flux (lm) @ 350 mA
S5 172 XPEWHT-L1-0000-00ME3
E3 5000 K S4 164 XPEWHT-L1-0000-00LE3
S3 156 XPEWHT-L1-0000-00KE3
S4 164 XPEWHT-L1-0000-00LF4
F4 4750 K S3 156 XPEWHT-L1-0000-00KF4
S2 148 XPEWHT-L1-0000-00JF4
S4 164 XPEWHT-L1-0000-00LE4
E4 4500 K S3 156 XPEWHT-L1-0000-00KE4
S2 148 XPEWHT-L1-0000-00JE4
S4 164 XPEWHT-L1-0000-00LF5
F5 4250 K S3 156 XPEWHT-L1-0000-00KF5
S2 148 XPEWHT-L1-0000-00JF5
S4 164 XPEWHT-L1-0000-00LE5
E5 4000 K S3 156 XPEWHT-L1-0000-00KE5 XPEWHT-H1-0000-00KE5
S2 148 XPEWHT-L1-0000-00JE5 XPEWHT-H1-0000-00JE5
S3 156 XPEWHT-L1-0000-00KZ5 XPEWHT-H1-0000-00KZ5
Z5 4000 K
S2 148 XPEWHT-L1-0000-00JZ5 XPEWHT-H1-0000-00JZ5
Notes:
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 34).
• XLamp XP-E LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
6
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
Minimum Luminous
Chromaticity Order Codes
Flux (lm) @ 350 mA
Kit CCT Code Flux (lm) 80 CRI Typical 80 CRI Minimum 90 CRI Minimum
Notes:
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 34).
• XLamp XP-E LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
7
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
Minimum Luminous
Chromaticity Order Codes
Flux (lm) @ 350 mA
Kit CCT Code Flux (lm) 80 CRI Typical 80 CRI Minimum 90 CRI Minimum
Notes:
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 34).
• XLamp XP-E LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
8
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
The following tables provide order codes for XLamp XP-E color LEDs. For a complete description of the order code nomenclature, please
see the Bin and Order Code Formats section (page 32).
Notes:
• Cree LED maintains a tolerance of ±7% on flux and power measurements, and ±1 nm on dominant wavelength measurements. See the Measurements
section (page 34).
• XLamp XP-E LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
• Calculated Photosynthetic Photon Flux (PPF) values are for reference only.
9
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
ORDER CODES SUGGESTED FOR NEW DESIGNS - COLOR (TJ = 25 °C) - CONTINUED
Notes:
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 34).
• XLamp XP-E LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
10
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
ORDER CODES SUGGESTED FOR NEW DESIGNS - COLOR (TJ = 25 °C) - CONTINUED
Notes:
• Cree LED maintains a tolerance of ±7% on flux and power measurements, and ±1 nm on dominant wavelength measurements. See the Measurements
section (page 34).
• XLamp XP-E LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
• Calculated Photosynthetic Photon Flux (PPF) values are for reference only.
11
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
ORDER CODES SUGGESTED FOR NEW DESIGNS - COLOR (TJ = 25 °C) - CONTINUED
Notes:
• Cree LED maintains a tolerance of ±7% on flux and power measurements, and ±1 nm on dominant wavelength measurements. See the Measurements
section (page 34).
• XLamp XP-E LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
• Calculated Photosynthetic Photon Flux (PPF) values are for reference only.
12
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
White
100%
80%
Relative Radiant Power
5000 K -
60% 10,000 K CCT
3700 K - 5000
K CCT
40% 2600 K - 3700
K CCT
20%
0%
380 430 480 530 580 630 680 730 780
Wavelength (nm)
XP Color Graph 1 - roboto
blue, green data from: XPEA_Datasheet_Update_220516.xlsx
Color
100%
80% Blue
Relative Radiant Power
Green
60%
Amber
40% Red-Orange
Red
20%
HE Photo Red
0%
380 430 480 530 580 630 680 730 780
Wavelength (nm)
13
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
100%
Relative Luminous Flux
80%
60% White
40%
20%
0%
25 50 75 100 125 150
Junction Temperature (ºC)
Relative Flux Output vs. Junction Temperature
blue, green data from: XPEA_Datasheet_Update_220516.xlsx
Color
120%
100%
Relative Luminous Flux
80%
Blue
Green
60%
Amber
40% Red-Orange,
Red
20%
0%
25 50 75 100 125 150
Junction Temperature (ºC)
14
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
100%
Relative Radiant Flux
80%
40%
20%
0%
25 50 75 100 125 150
900
800
Forward Current (mA)
700
600
500 White
400
300
200
100
0
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
15
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
Electrical Characteristics
ELECTRICAL CHARACTERISTICS (Tj = 25ºC)
(TJ = 25 °C) - CONTINUED
blue, green data from: XPEA_Datasheet_Update_220516.xlsx
Color
1000
900
800
Forward Current (mA)
700 Blue
600 Green
500 Amber
400 Red-Orange,
Red
300 HE Photo Red
200
100
0
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
White
300%
250%
Relative Luminous Flux
200%
150% White
100%
50%
0%
0 100 200 300 400 500 600 700 800 900 1000
16
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
250%
Relative Luminous Flux
200% Blue
Green
150%
Amber
100% Red-Orange,
Red
50%
0%
0 100 200 300 400 500 600 700 800 900 1000
300%
250%
Relative Radiant Flux
200%
150%
HE Photo Red
100%
50%
0%
0 100 200 300 400 500 600 700 800 900 1000
17
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
Delta CCT
RELATIVE CHROMATICITY VS. vs. Current AND TEMPERATURE - WARM WHITE
CURRENT
data from: XPEA_Datasheet_Update_220516.xlsx
0.020
0.015
0.010
0.005
ΔCCx
0.000
ΔCCy
-0.005
-0.010
-0.015
-0.020
0 100 200 300 400 500 600 700 800 900 1000
Delta CCT vs Temp
data from: XPEA_Datasheet_Update_220516.xlsx Current (mA)
0.020
0.015
0.010
0.005
ΔCCx
0.000
ΔCCy
-0.005
-0.010
-0.015
-0.020
25 50 75 100 125 150
Tsp (°C)
18
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
80%
Relative Luminous Intensity
60%
White
40%
20%
0%
-90 -70 -50 -30 -10 10 30 50 70 90
Angle (°)
Typical Spatial Distribution - color
Color
100%
80%
Relative Luminous Intensity
60%
Color
40%
20%
0%
-90 -70 -50 -30 -10 10 30 50 70 90
Angle (°)
19
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
THERMAL DESIGN
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
and optical characteristics.
1100 1100
1000 1000
900 900
Maximum Current (mA)
700 White
700
600 600
500 500
400 400
300 300
Rj-a = 15°C/W
200 200 Rj-a = 10°C/W
Rj-a = 20°C/W Rj-a = 15°C/W
100 100
Rj-a = 25°C/W Rj-a = 20°C/W
0 0
0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160
White Blue
data from: XPEA_Datasheet_Update_220516.xlsx 1100 Graph 9
1100
900 900 G
Maximum Current (mA)
Maximum Current (mA)
800 800 A
700 700
600 600
500 500
400 400
300 300
Rj-a = 20°C/W Rj-a = 20°C/W
200 200
Rj-a = 25°C/W Rj-a = 30°C/W
100 100
Rj-a = 30°C/W Rj-a = 40°C/W
0
0
0 20 40 60 80 100 120 140 160
0 20 40 60 80 100 120 140 160
Ambient Temperature (°C)
Ambient Temperature (°C)
Green Amber
1100 1100
800 800
Red, Red-Orange
700 700
600 600
500 500
400 400
300 300
Rj-a = 20°C/W Rj-a = 20°C/W
200 200
Rj-a = 30°C/W Rj-a = 30°C/W
100 100
Rj-a = 40°C/W Rj-a = 40°C/W
0 0
0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160
20
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
XLamp XP-E LEDs are tested for luminous flux and placed into one of the following luminous‑flux groups:
N3 56.8 62.0
N4 62.0 67.2
P2 67.2 73.9
P3 73.9 80.6
P4 80.6 87.4
Q2 87.4 93.9
Q3 93.9 100
Q4 100 107
Q5 107 114
R2 114 122
R3 122 130
R4 130 139
R5 139 148
S2 148 156
S3 156 164
S4 164 172
S5 172 180
XLamp XP-E HE photo red LEDs are tested for radiant flux and sorted into one of the following radiant‑flux bins:
26 350 375
27 375 400
28 400 425
29 425 450
21
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
White XLamp XP-E LEDs are tested for chromaticity and placed into one of the regions defined by the bounding coordinates on the
following pages.
Region x y Region x y
22
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
23
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
24
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
25
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
Color XLamp XP-E LEDs are tested for dominant wavelength (DWL) and sorted into one of the DWL bins defined below.
B3 465 470
B4 470 475
Blue
B5 475 480
B6 480 485
G2 520 525
Green G3 525 530
G4 530 535
A2 585 590
Amber
A3 590 595
O3 610 615
Red-Orange
O4 615 620
R2 620 625
Red
R3 625 630
XLamp XP-E HE photo red LEDs are tested for peak wavelength (PWL) and sorted into one of the PWL bins defined below.
P2 650 655
P3 655 660
HE Photo Red
P4 660 665
P5 665 670
26
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
XLamp XP-E amber, red-orange and red LEDs are tested for forward voltage and sorted into one of the forward voltage bins defined below.
Forward Voltage Minimum Forward Voltage (V) Maximum Forward Voltage (V)
Group @ 350 mA @ 350 mA
A 1.5 1.75
B 1.75 2.0
C 2.0 2.25
D 2.25 2.5
E 2.5 2.75
F 2.75 3.0
G 3.0 3.25
H 3.25 3.5
J 3.5 3.75
27
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
0.40 0.40
5000 K
5000 K
0.39 0.39
0.38 5700 K
0.38 5700 K
53
3S 3S
51
0.37 0.37
6500 K 6500 K 2T
2T
0.36 0.36 3B
2S 3B 2S
2C 0.35 2C
0.35 1T 1T
3A 8000 K 3A
8000 K 2B 2B
CCy
0.34 0.34 1S
CCy
1S 2D 1C 2D
1C
3R 2A 3R
2A 0T
0.33 0T 0.33 1B
1B
1D 2U 1D 2U
0S 0C ANSI 0S 0C 2R ANSI
0.32 1A
2R 0.32 1A
1U C78.377A 1U C78.377A
0B 0B
0D 0D
0.31 1R
0.31 1R
0A 0A
0U 0U
0.30 0.30
0R 0R
0.29 0.29
0.28 0.28
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCx CCx
0.40
5000 K
0.39
0.38 5700 K
3S
0.37
6500 K 50 2T
0.36 3B
2S
0.35 2C
1T
8000 K 3A
2B
0.34 1S 2D
1C
CCy
2A 3R
0.33 0T
1B
1D 2U
0S 0C 2R ANSI
0.32 1A
1U C78.377A
0B 0D
0.31 1R
0A
0U
0.30
0R
0.29
0.28
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCx
0.40
0.40
5000 K 5000 K
0.39 0.39
0.37
3S
0.37 E2 3S
6500 K 2T 6500 K 2T
0.36 0.36
E1 2S 3B 3B
2S
0.35 2C 2C
1T 0.35 1T
8000 K 3A 3A
2B 8000 K 2B
CCy
CCy
0.34 1S 2D 0.34 1S
1C 1C 2D
2A 3R
0T 2A 3R
0.33 1B 0T
1D 2U 0.33 1B
1D 2U
0S 0C 2R ANSI
0.32 1A 0S 0C 2R ANSI
C78.377A 0.32 1A
1U C78.377A
0B 0D 1U
0.31 0B
1R 0.31 0D
0A 1R
0U 0A
0.30 0U
0R 0.30
0R
0.29
0.29
0.28
0.28
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCx
CCx
28
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
0.46
0.45
2700 K
3000 K
0.44
E8
E7
0.43
3500 K
8C3
8C2
8B3
8B2
0.42 7C3
4000 K 7C2
E6
7B3 8C4
8C1
7B2 8B4
8B1
0.41 4500 K 6C3
7C1
7C4
6C2 7B4 8D3
8D2
8A3
E5
6B3 7B1 8A2
6C4 7D3
0.40 6B2 7D2 8D4
5C3 6C1 7A3
7A2 8A4 8D1
5000 K 5C2 6B4 8A1
6D3 7D4
CCy
E4
6D2 7A4
5B2 5C1 6A3 7A1
6D4
5B4 5D3 6A2
0.38 6D1
5B1 5D2 6A4
E3
4C
5A3 5D4 6A1
0.37 4B 5A2 5D1
3C 5A4 ANSI
4D 5A1 C78.377A
0.36 3B
4A
3D
0.35
3A
0.34
0.33
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCx
0.46
0.45
2700 K
3000 K
0.44
0.43 3500 K
F8
F7
8C3
8C2
8B3
8B2
0.42 7C3
4000 K 7C2 8C4
7B3 8C1
F6
7B2 8B4
8B1
0.41 4500 K 6C3
7C1
7C4
6C2 7B4 8D3
8D2
7B1 8A3
6B3 8A2
6C4 7D3
0.40
F5
6B2 7D2 8D4
5C3 6C1 7A3
7A2 8A4 8D1
5000 K 5C2 6B4 8A1
CCy
6D3 7D4
0.39 5B3 5C4 6B1
6D2 7A4
7D1
7A1
F4
5B2 5C1 6A3
6D4
5B4 5D3 6A2
0.38 5B1 5D2
6D1
4C 6A4
5A3 5D4 6A1
0.37 4B 5A2 5D1
3C 5A4 ANSI
4D 5A1 C78.377A
0.36 3B
4A
3D
0.35
3A
0.34
0.33
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCx
29
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS -
CONTINUED
0.46
0.45
2700 K
3000 K
0.44
Z8
0.43 3500 K
Z7 8C2
8C3
Z6
8B3
8B2
0.42 7C3
4000 K 7C2 8C4
7B3 8C1
7B2 8B4
8B1
Z5
0.41 4500 K 6C3
7C1
7C4
6C2 7B4 8D3
8D2
7B1 8A3
6B3 8A2
6C4 7D3
0.40 5C3 6B2 7D2 8D4
6C1 7A3
7A2 8A4 8D1
5000 K 5C2 6B4 8A1
6D3 7D4
CCy
0.34
0.33
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCx
30
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
The following table provides the chromaticity bins associated with chromaticity kits.
6200 K 51 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S
6000 K 53 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S
Cool
6200 K 50 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D
White
6500 K E1 1A, 1B, 1C, 1D
5700 K E2 2A, 2B, 2C, 2D
5000 K E3 3A, 3B, 3C, 3D
4750 K F4 3C, 3D, 4A, 4B
31
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
XP-E bin codes and order codes are configured in the following manner:
32
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
In testing, Cree LED has found XLamp XP-E LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a
general guideline, Cree LED recommends that users follow the recommended soldering profile provided by the manufacturer of the solder
paste used, and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
tP
TP Critical Zone
TL to TP
Ramp-up
TL tS
Temperature
Tsmax
Tsmin
ts Ramp-down
Preheat
25
t 25˚C to Peak
Time IPC/JEDEC J-STD-020C
Note: All temperatures refer to topside of the package, measured on the package body surface.
33
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
NOTES
Measurements
The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only
and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number
of factors that are not within Cree LED’s control and are not intended or provided as operational specifications for the products. Calculated
values are provided for informational purposes only and are not intended or provided as specifications.
Lumen Maintenance
Cree LED now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen
maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree LED’s lumen maintenance testing and
forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive
current affect the LED junction temperature.
Moisture Sensitivity
Cree LED recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to
soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XP-E LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in
conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree LED recommends sealing any unsoldered
LEDs in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree LED representative or from the Product
Ecology section of the Cree LED website.
REACH Compliance
REACH substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency
(ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree LED
representative to insure you get the most up-to-date REACH SVHC Declaration. REACH banned substance information (REACH Article 67)
is also available upon request.
34
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
NOTES - CONTINUED
UL® Recognized Component
This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED
package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
Intellectual Property
For remote phosphor applications, a separate license to certain Cree LED patents is required.
35
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
OPTICAL
OPTICAL MODEL ORIGIN
F MODEL ORIGIN
2.00
ANODE
SIDE
E
3.45
R1.30 0.58
3.45
5 4 3 2 1
SOLDERMASK
Top View SideVIEW
View MAY BE PRESENT BO
D
TOP VIEW SIDE
3.30
SOLDERMASK CENTER PAD 3.30
2.30 F
3.30 MAY BE PRESENT IS ELECTRICALLY
2.00 2.30
ISOLATED
0.50
0.73 2.30 1.01
0.50 0.50
ANODE CATHODE
0.75
SIDE SIDE
3.30 REF.
E
3.30
3.30
3.30 RECOMMENDED
Bottom View
PCB FOOTPRINT Alternate Bottom View RECOMMENDED STENCIL OP
0.28
2.30
A 1.01
36
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18 THE INFORMATION CONTAINED IN THI
DRAWING IS THE SOLE PROPERTY OF
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29 CREE LED. ANY REPRODUCTION IN
PART OR AS A WHOLE WITHOUT
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. C
0.75
8 7 6 5 4
CATHODE ANODE 0.73 2.30
SIDE SIDE 0.50 0.50
ANODE CATHODE
SIDE SIDE
XLAMP ® XP-E LED
E
3.45
R1.30 0.58 1.30 3.30 RE
MECHANICAL DIMENSIONS (T3.45
A
= 25 °C) - CONTINUED
SOLDERMASK CENTER PAD
MAY BE PRESENT BOTTOM VIEW IS ELECTRICALLY ALTERNATE BO
D
TOP VIEW SIDE VIEW
ISOLATED
3.30
3.30
2.30
0.28
2.30
0.50
1.01
0.75
C
3.30
3.30
0.25
B
TLING
DATE
24AUG22
• ANGULAR: MACH 0.5° BEND 1°
• ONE PLACE DECIMAL 0.5 CHECKED TITLE:
• TWO PLACE DECIMAL 0.05
A • INSIDE BEND RADII EQUAL ENG APPR.
Notes:
MATERIAL
• MACHINE/CASTING RADII 0.50
• RADII AND DIA: 0.10 MFG APPR.
• Cree LED recommends using thermal pad kickouts to maximize component thermal performance.
PROPRIETARY AND CONFIDENTIAL B OPTICAL MODEL ORIGIN TOLERANCING PER:
THIRD ANGLE PROJECTION
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
MATERIAL
SIZE DW
C
A DRAWING INITIATED
CREE LED. ANY REPRODUCTION IN MATERIAL
• Cree LED recommends using white solder mask material to minimize system optical loss.
PART OR AS A WHOLE WITHOUT FINISH
WRITTEN PERMISSION OF CREE LED
REV DESCRIPTION
IS PROHIBITED. FINISH
© 2021 CreeLED, Inc. a subsidiary
SCALE: 2
* This stencil has been8 tested and optimized for the avoidance6 of voiding when using ALPHA® LUMET®4 P30 Maxrel solder 3 paste. For other solder
of SMART Global Holdings, Inc. APPLICATION
7 5 2 2 1
pastes, a “window pane” design for the thermal pad stencil may result in a lower voiding percentage. Contact your local Cree LED Field Applications
Engineer for consultation regarding your specific application.
37
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
All Cree LED carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
Except as noted, all dimensions in mm.
T
Po P2 Do E
Bo
R
W
F
Anode side A A "H"
P1 D1 B Ko
B-B SECTION
Ao (on a place in the
radii)
"I"
Ao
A-A SECTION DETAIL"I" DETAIL"H"
ITEM Ao Bo Ko Po P1 P2 TDo E
Item Ao Bo Ko Po P1 P2 T E F D1 W R
Dim. Dim.
3.75 3.75 5.40 2.10 5.40 4.00 3.35
8.00 4.00
2.00 0.30 8.00 1.75 2.00 5.50 0.36
1.50 1.75
1.50 12.00 8°
ITEM F Do D1 W R
Dim. 5.50 1.50 1.50 12.00 3deg
NOTICE
1) All Cree LED carrier tapes conform to EIA-481D, Automated Component handling Systems Standard
2) Measurement tolerances unless indicated otherwise: .xx = ±.15 mm
2402-M022 XML3
38
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
Feed Direction
END START
Feed Direction
Cover Tape
Pocket Tape
13 mm
7”
39
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
PACKAGING
40
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
The following order codes are active and valid order codes, but higher performance options are also available. Please see page 4 -
page 8 for order codes of XLamp XP-E white LEDs that could serve as alternatives for the order codes set forth below.
WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP XPEWHT-L1-0000-00C01
Q4 100 WC, WD, WF, WG XPEWHT-L1-0000-00C02
WC, WD, WF, WG, WH, WJ, WN, WP XPEWHT-L1-0000-00C03
WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP XPEWHT-L1-0000-00D01
Q5 107 WC, WD, WF, WG XPEWHT-L1-0000-00D02
WC, WD, WF, WG, WH, WJ, WN, WP XPEWHT-L1-0000-00D03
WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP XPEWHT-L1-0000-00E01
R2 114 WC, WD, WF, WG XPEWHT-L1-0000-00E02
WC, WD, WF, WG, WH, WJ, WN, WP XPEWHT-L1-0000-00E03
WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP XPEWHT-L1-0000-00F01
R3 122 WC, WD, WF, WG XPEWHT-L1-0000-00F02
WC, WD, WF, WG, WH, WJ, WN, WP XPEWHT-L1-0000-00F03
Notes:
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 34).
• XLamp XP-E LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
41
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
Minimum Luminous
Chromaticity Order Codes
Flux (lm) @ 350 mA
R3 122 XPEWHT-L1-0000-00F51
R2 114 XPEWHT-L1-0000-00E51
51 6200 K
Q5 107 XPEWHT-L1-0000-00D51
Q4 100 XPEWHT-L1-0000-00C51
R3 122 XPEWHT-L1-0000-00F53
R2 114 XPEWHT-L1-0000-00E53
53 6000 K
Q5 107 XPEWHT-L1-0000-00D53
Q4 100 XPEWHT-L1-0000-00C53
R3 122 XPEWHT-L1-0000-00F50
R2 114 XPEWHT-L1-0000-00E50
50 6200 K
Q5 107 XPEWHT-L1-0000-00D50
Q4 100 XPEWHT-L1-0000-00C50
R3 122 XPEWHT-L1-0000-00FE1
R2 114 XPEWHT-L1-0000-00EE1
E1 6500 K
Q5 107 XPEWHT-L1-0000-00DE1
Q4 100 XPEWHT-L1-0000-00CE1
R3 122 XPEWHT-L1-0000-00FE2
R2 114 XPEWHT-L1-0000-00EE2
E2 5700 K
Q5 107 XPEWHT-L1-0000-00DE2
Q4 100 XPEWHT-L1-0000-00CE2
Notes:
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 34).
• XLamp XP-E LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
42
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
Minimum Luminous
Chromaticity Order Codes
Flux (lm) @ 350 mA
Q5 107 XPEWHT-L1-0000-00DE3
E3 5000 K Q4 100 XPEWHT-L1-0000-00CE3
Q3 93.9 XPEWHT-L1-0000-00BE3
Q5 107 XPEWHT-L1-0000-00DF4
F4 4750 K Q4 100 XPEWHT-L1-0000-00CF4
Q3 93.9 XPEWHT-L1-0000-00BF4
Q5 107 XPEWHT-L1-0000-00DE4
E4 4500 K Q4 100 XPEWHT-L1-0000-00CE4
Q3 93.9 XPEWHT-L1-0000-00BE4
Q5 107 XPEWHT-L1-0000-00DF5
Q4 100 XPEWHT-L1-0000-00CF5
F5 4250 K
Q3 93.9 XPEWHT-L1-0000-00BF5
Q2 87.4 XPEWHT-L1-0000-00AF5
Q5 107 XPEWHT-L1-0000-00DE5
Q4 100 XPEWHT-L1-0000-00CE5 XPEWHT-H1-0000-00CE5
E5 4000 K
Q3 93.9 XPEWHT-L1-0000-00BE5 XPEWHT-H1-0000-00BE5
Q2 87.4 XPEWHT-L1-0000-00AE5 XPEWHT-H1-0000-00AE5
Q4 100 XPEWHT-L1-0000-00CZ5
Z5 4000 K Q3 93.9 XPEWHT-L1-0000-00BZ5 XPEWHT-H1-0000-00BZ5
Q2 87.4 XPEWHT-L1-0000-00AZ5 XPEWHT-H1-0000-00AZ5
Notes:
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 34).
• XLamp XP-E LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
43
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
Minimum Luminous
Chromaticity Order Codes
Flux (lm) @ 350 mA
Kit CCT Code Flux (lm) 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
Q4 100 XPEWHT-L1-0000-00CF6
Q3 93.9 XPEWHT-L1-0000-00BF6 XPEWHT-H1-0000-00BF6
F6 3750 K
Q2 87.4 XPEWHT-L1-0000-00AF6 XPEWHT-H1-0000-00AF6
P4 80.6 XPEWHT-L1-0000-009F6 XPEWHT-H1-0000-009F6
Q4 100 XPEWHT-L1-0000-00CE6
Q3 93.9 XPEWHT-L1-0000-00BE6 XPEWHT-H1-0000-00BE6
E6 3500 K
Q2 87.4 XPEWHT-L1-0000-00AE6 XPEWHT-H1-0000-00AE6
P4 80.6 XPEWHT-L1-0000-009E6 XPEWHT-H1-0000-009E6
Q3 93.9 XPEWHT-L1-0000-00BZ6
Z6 3500 K Q2 87.4 XPEWHT-L1-0000-00AZ6 XPEWHT-H1-0000-00AZ6
P4 80.6 XPEWHT-L1-0000-009Z6 XPEWHT-H1-0000-009Z6
Q3 93.9 XPEWHT-L1-0000-00BF7
F7 3250 K Q2 87.4 XPEWHT-L1-0000-00AF7 XPEWHT-H1-0000-00AF7
P4 80.6 XPEWHT-L1-0000-009F7 XPEWHT-H1-0000-009F7
Q3 93.9 XPEWHT-L1-0000-00BE7
Q2 87.4 XPEWHT-L1-0000-00AE7 XPEWHT-H1-0000-00AE7
P4 80.6 XPEWHT-L1-0000-009E7 XPEWHT-H1-0000-009E7 XPEWHT-P1-0000-009E7
E7 3000 K
P3 73.9 XPEWHT-P1-0000-008E7 XPEWHT-U1-0000-008E7
P2 67.2 XPEWHT-P1-0000-007E7 XPEWHT-U1-0000-007E7
N4 62 XPEWHT-P1-0000-006E7 XPEWHT-U1-0000-006E7
Q2 87.4 XPEWHT-L1-0000-00AZ7 XPEWHT-H1-0000-00AZ7
P4 80.6 XPEWHT-L1-0000-009Z7 XPEWHT-H1-0000-009Z7
Z7 3000 K P3 73.9 XPEWHT-P1-0000-008Z7
P2 67.2 XPEWHT-P1-0000-007Z7 XPEWHT-U1-0000-007Z7
N4 62 XPEWHT-P1-0000-006Z7 XPEWHT-U1-0000-006Z7
Q2 87.4 XPEWHT-L1-0000-00AF8
P4 80.6 XPEWHT-L1-0000-009F8 XPEWHT-H1-0000-009F8
P3 73.9 XPEWHT-L1-0000-008F8 XPEWHT-H1-0000-008F8 XPEWHT-P1-0000-008F8
F8 2850 K
P2 67.2 XPEWHT-P1-0000-007F8 XPEWHT-U1-0000-007F8
N4 62 XPEWHT-P1-0000-006F8 XPEWHT-U1-0000-006F8
N3 56.8 XPEWHT-P1-0000-005F8 XPEWHT-U1-0000-005F8
Q2 87.4 XPEWHT-L1-0000-00AE8
P4 80.6 XPEWHT-L1-0000-009E8 XPEWHT-H1-0000-009E8
P3 73.9 XPEWHT-L1-0000-008E8 XPEWHT-H1-0000-008E8 XPEWHT-P1-0000-008E8
E8 2700 K
P2 67.2 XPEWHT-P1-0000-007E8 XPEWHT-U1-0000-007E8
N4 62 XPEWHT-P1-0000-006E8 XPEWHT-U1-0000-006E8
N3 56.8 XPEWHT-P1-0000-005E8 XPEWHT-U1-0000-005E8
Notes:
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 34).
• XLamp XP-E LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
44
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
Minimum Luminous
Chromaticity Order Codes
Flux (lm) @ 350 mA
Kit CCT Code Flux (lm) 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
Notes:
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 34).
• XLamp XP-E LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
45
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
XLAMP ® XP-E LED
The following order codes are active and valid order codes, but higher performance options are also available. Please see page 9 -
page 10 for order codes of XLamp XP-E color LEDs that could serve as alternatives for the order codes set forth below.
Notes:
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 34).
• XLamp XP-E LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
46
© 2008-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp® are registered CLD-DS18
trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, product, and REV 29
company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.