Professional Documents
Culture Documents
Cree LED / 4400 Silicon Drive / Durham, NC 27703 USA / +1.919.313.5330 / www.cree-led.com
1
© 2011-202 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
TABLE OF CONTENTS
Characteristics........................................................................................................................................................................................................ 3
Order Codes Suggested for New Designs - White................................................................................................................................................ 4
Order Codes Suggested for New Designs - Color............................................................................................................................................... 10
Relative Spectral Power Distribution................................................................................................................................................................... 14
Relative Flux vs. Junction Temperature............................................................................................................................................................... 15
Electrical Characteristics - White......................................................................................................................................................................... 16
Electrical Characteristics - Color.......................................................................................................................................................................... 16
Relative Flux vs. Current - White........................................................................................................................................................................... 17
Relative Flux vs. Current - Color........................................................................................................................................................................... 17
Relative Chromaticity vs. Current......................................................................................................................................................................... 18
Relative Chromaticity vs. Temperature................................................................................................................................................................ 19
Typical Spatial Distribution................................................................................................................................................................................... 19
Thermal Design..................................................................................................................................................................................................... 20
Performance Groups – Luminous Flux............................................................................................................................................................... 21
Performance Groups – Radiant Flux................................................................................................................................................................... 22
Performance Groups – Dominant Wavelength................................................................................................................................................... 22
Performance Groups – Forward Voltage............................................................................................................................................................ 23
Performance Groups – Chromaticity................................................................................................................................................................... 23
Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions..................................................................................................... 27
Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions.............................................................................. 28
Cree LED’s PC Amber Kit Plotted on the 1931 CIE Curve................................................................................................................................... 29
Cree LED’s Standard Chromaticity Kits................................................................................................................................................................ 29
Bin and Order Code Formats................................................................................................................................................................................ 30
Reflow Soldering Characteristics......................................................................................................................................................................... 31
Notes..................................................................................................................................................................................................................... 32
Mechanical Dimensions....................................................................................................................................................................................... 34
Tape and Reel........................................................................................................................................................................................................ 36
Packaging.............................................................................................................................................................................................................. 37
Appendix - Order Codes Not For New Designs................................................................................................................................................... 38
2
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
CHARACTERISTICS
Thermal resistance, junction to solder point - white, royal blue, blue °C/W 6.5
ESD withstand voltage (HBM per Mil-Std-883D) - white, royal blue, blue, green V 8000
Reverse voltage V 1
Forward voltage (@ 350 mA, 25 °C) - amber, red-orange, red V 2.17 2.6
3
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
The following tables provide order codes for XLamp XB-D white LEDs. For a complete description of the order-code nomenclature, please
consult the Bin and Order Formats section (page 30).
Notes:
• For additional order codes NOT recommended for new designs please see the Appendix section starting on page 38 .
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 32).
• XLamp XB-D LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
• Typical CRI for Neutral White, 3700 K - 5000 K CCT is 75.
• Typical CRI for Warm White, 2600 K - 3700 K CCT is 80.
• Minimum CRI for 70 CRI Minimum Cool White is 70.
• Minimum CRI for 80 CRI Minimum White is 80.
* Flux values @ 25 °C are calculated and are for reference only.
** Calculated flux values at 700 mA and 1000 mA are for 85 °C and are for reference only.
4
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
ORDER CODES SUGGESTED FOR NEW DESIGNS - WHITE (TJ = 85 °C) - CONTINUED
XBDAWT-00-0000- XBDAWT-00-0000-
R5 139 156 239 308
000000HE1 00000BHE1
XBDAWT-00-0000- XBDAWT-00-0000- XBDAWT-00-0000-
R4 130 148 224 289
000000GE1 00000BGE1 00000HGE1
E1 6500 K
XBDAWT-00-0000- XBDAWT-00-0000- XBDAWT-00-0000-
R3 122 139 210 271
000000FE1 00000BFE1 00000HFE1
XBDAWT-00-0000-
R2 114 130 196 253
00000HEE1
XBDAWT-00-0000- XBDAWT-00-0000-
R5 139 156 239 308
000000HE2 00000BHE2
XBDAWT-00-0000- XBDAWT-00-0000- XBDAWT-00-0000-
R4 130 148 224 289
000000GE2 00000BGE2 00000HGE2
E2 5700 K
XBDAWT-00-0000- XBDAWT-00-0000- XBDAWT-00-0000-
R3 122 139 210 271
000000FE2 00000BFE2 00000HFE2
XBDAWT-00-0000-
R2 114 130 196 253
00000HEE2
Notes:
• For additional order codes NOT recommended for new designs please see the Appendix section starting on page 38 .
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 32).
• XLamp XB-D LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
• Typical CRI for Neutral White, 3700 K - 5000 K CCT is 75.
• Typical CRI for Warm White, 2600 K - 3700 K CCT is 80.
• Minimum CRI for 70 CRI Minimum Cool White is 70.
• Minimum CRI for 80 CRI Minimum White is 80.
* Flux values @ 25 °C are calculated and are for reference only.
** Calculated flux values at 700 mA and 1000 mA are for 85 °C and are for reference only.
5
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
ORDER CODES SUGGESTED FOR NEW DESIGNS - WHITE (TJ = 85 °C) - CONTINUED
Calculated
Minimum Luminous Flux (lm) Minimum
Chromaticity Order Codes
@ 350 mA* Luminous Flux
(lm)**
Notes:
• For additional order codes NOT recommended for new designs please see the Appendix section starting on page 38 .
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 32).
• XLamp XB-D LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
• Typical CRI for Neutral White, 3700 K - 5000 K CCT is 75.
• Typical CRI for Warm White, 2600 K - 3700 K CCT is 80.
• Minimum CRI for 70 CRI Minimum Cool White is 70.
• Minimum CRI for 80 CRI Minimum White is 80.
* Flux values @ 25 °C are calculated and are for reference only.
** Calculated flux values at 700 mA and 1000 mA are for 85 °C and are for reference only.
6
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
ORDER CODES SUGGESTED FOR NEW DESIGNS - WHITE (TJ = 85 °C) - CONTINUED
Calculated
Minimum Luminous Flux (lm) Minimum
Chromaticity Order Codes
@ 350 mA* Luminous Flux
(lm)**
Notes:
• For additional order codes NOT recommended for new designs please see the Appendix section starting on page 38 .
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 32).
• XLamp XB-D LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
• Typical CRI for Neutral White, 3700 K - 5000 K CCT is 75.
• Typical CRI for Warm White, 2600 K - 3700 K CCT is 80.
• Minimum CRI for 70 CRI Minimum Cool White is 70.
• Minimum CRI for 80 CRI Minimum White is 80.
* Flux values @ 25 °C are calculated and are for reference only.
** Calculated flux values at 700 mA and 1000 mA are for 85 °C and are for reference only.
7
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
ORDER CODES SUGGESTED FOR NEW DESIGNS - WHITE (TJ = 85 °C) - CONTINUED
Calculated
Minimum Luminous Flux (lm) Minimum
Chromaticity Order Codes
@ 350 mA* Luminous Flux
(lm)**
Notes:
• For additional order codes NOT recommended for new designs please see the Appendix section starting on page 38 .
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 32).
• XLamp XB-D LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
• Typical CRI for Neutral White, 3700 K - 5000 K CCT is 75.
• Typical CRI for Warm White, 2600 K - 3700 K CCT is 80.
• Minimum CRI for 70 CRI Minimum Cool White is 70.
• Minimum CRI for 80 CRI Minimum White is 80.
* Flux values @ 25 °C are calculated and are for reference only.
** Calculated flux values at 700 mA and 1000 mA are for 85 °C and are for reference only.
8
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
ORDER CODES SUGGESTED FOR NEW DESIGNS - WHITE (TJ = 85 °C) - CONTINUED
Calculated
Minimum Luminous Flux (lm) Minimum
Chromaticity Order Codes
@ 350 mA* Luminous Flux
(lm)**
Notes:
• For additional order codes NOT recommended for new designs please see the Appendix section starting on page 38 .
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 32).
• XLamp XB-D LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
• Typical CRI for Neutral White, 3700 K - 5000 K CCT is 75.
• Typical CRI for Warm White, 2600 K - 3700 K CCT is 80.
• Minimum CRI for 70 CRI Minimum Cool White is 70.
• Minimum CRI for 80 CRI Minimum White is 80.
* Flux values @ 25 °C are calculated and are for reference only.
** Calculated flux values at 700 mA and 1000 mA are for 85 °C and are for reference only.
9
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
The following tables provide order codes for XLamp XB-D color LEDs. For a complete description of the order-code nomenclature, please
consult the Bin and Order Formats section (page 30).
Minimum Radiant
Royal Blue Flux (mW)
@ 350 mA
Order Codes
Dominant
Kit Code Flux (mW)
Wavelengh (nm)
38 650 XBDROY-00-0000-000000S01
37 625 XBDROY-00-0000-000000R01
01 450 - 465 36 600 XBDROY-00-0000-000000Q01
35 575 XBDROY-00-0000-000000P01
34 550 XBDROY-00-0000-000000N01
38 650 XBDROY-00-0000-000000S02
37 625 XBDROY-00-0000-000000R02
02 450 - 460 36 600 XBDROY-00-0000-000000Q02
35 575 XBDROY-00-0000-000000P02
34 550 XBDROY-00-0000-000000N02
37 625 XBDROY-00-0000-000000R03
36 600 XBDROY-00-0000-000000Q03
03 455 - 465
35 575 XBDROY-00-0000-000000P03
34 550 XBDROY-00-0000-000000N03
38 650 XBDROY-00-0000-000000S04
37 625 XBDROY-00-0000-000000R04
04 450 - 455
36 600 XBDROY-00-0000-000000Q04
35 575 XBDROY-00-0000-000000P04
37 625 XBDROY-00-0000-000000R05
36 600 XBDROY-00-0000-000000Q05
05 455 - 460
35 575 XBDROY-00-0000-000000P05
34 550 XBDROY-00-0000-000000N05
37 625 XBDROY-00-0000-000000R06
06 460 - 465 36 600 XBDROY-00-0000-000000Q06
35 575 XBDROY-00-0000-000000P06
38 650 XBDROY-00-0000-000000S07
07 452.5 - 457.5 37 625 XBDROY-00-0000-000000R07
36 600 XBDROY-00-0000-000000Q07
37 625 XBDROY-00-0000-000000R08
08 457.5 - 462.5 36 600 XBDROY-00-0000-000000Q08
35 575 XBDROY-00-0000-000000P08
Notes:
• For additional order codes NOT recommended for new designs please see the Appendix section starting on page 38 .
• XLamp XB-D LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
10
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
ORDER CODES SUGGESTED FOR NEW DESIGNS - COLOR (TJ = 25 °C) - CONTINUED
Minimum Radiant
Royal Blue Flux (mW)
@ 350 mA
Order Codes
Dominant
Kit Code Flux (mW)
Wavelengh (nm)
38 650 XBDROY-00-0000-000000S09
09 452.5 - 462.5 37 625 XBDROY-00-0000-000000R09
36 600 XBDROY-00-0000-000000Q09
Minimum
Blue Luminous Flux
(lm) @ 350 mA
Order Codes
Dominant
Kit Code Flux (lm)
Wavelengh (nm)
N2 51.7 XBDBLU-00-0000-000000401
M3 45.7 XBDBLU-00-0000-000000301
01 465 - 485
M2 39.8 XBDBLU-00-0000-000000201
K3 35.2 XBDBLU-00-0000-000000Z01
N2 51.7 XBDBLU-00-0000-000000402
M3 45.7 XBDBLU-00-0000-000000302
02 465 - 480
M2 39.8 XBDBLU-00-0000-000000202
K3 35.2 XBDBLU-00-0000-000000Z02
N2 51.7 XBDBLU-00-0000-000000405
M3 45.7 XBDBLU-00-0000-000000305
05 470 - 480
M2 39.8 XBDBLU-00-0000-000000205
K3 35.2 XBDBLU-00-0000-000000Z05
Minimum
Green Luminous Flux
(lm) @ 350 mA
Order Codes
Dominant
Kit Code Flux (lm)
Wavelengh (nm)
R5 139 XBDGRN-00-0000-000000H01
R4 130 XBDGRN-00-0000-000000G01
01 520 - 535 R3 120 XBDGRN-00-0000-000000F01
R2 114 XBDGRN-00-0000-000000E01
Q5 107 XBDGRN-00-0000-000000D01
R5 139 XBDGRN-00-0000-000000H02
R4 130 XBDGRN-00-0000-000000G02
02 520 -530 R3 120 XBDGRN-00-0000-000000F02
R2 114 XBDGRN-00-0000-000000E02
Q5 107 XBDGRN-00-0000-000000D02
Notes:
• For additional order codes NOT recommended for new designs please see the Appendix section starting on page 38 .
• XLamp XB-D LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
11
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
ORDER CODES SUGGESTED FOR NEW DESIGNS - COLOR (TJ = 25 °C) - CONTINUED
Minimum
Green Luminous Flux
(lm) @ 350 mA
Order Codes
Dominant
Kit Code Flux (lm)
Wavelengh (nm)
R5 139 XBDGRN-00-0000-000000H03
R4 130 XBDGRN-00-0000-000000G03
03 525 - 535 R3 120 XBDGRN-00-0000-000000F03
R2 114 XBDGRN-00-0000-000000E03
Q5 107 XBDGRN-00-0000-000000D03
Minimum
PC Amber Luminous Flux
(lm) @ 350 mA Order Codes
Q4 100 XBDBPA-00-0000-000000C01
01 Y2 Q3 93.9 XBDBPA-00-0000-000000B01
Q2 87.4 XBDBPA-00-0000-000000A01
Minimum
Amber Luminous Flux
(lm) @ 350 mA
Order Codes
Dominant
Kit Code Flux (lm)
Wavelengh (nm)
Q2 87.4 XBDAMB-00-0000-000000A01
P4 80.6 XBDAMB-00-0000-000000901
01 585 - 595
P3 73.9 XBDAMB-00-0000-000000801
P2 67.2 XBDAMB-00-0000-000000701
Q2 87.4 XBDAMB-00-0000-000000A03
P4 80.6 XBDAMB-00-0000-000000903
03 590 - 595
P3 73.9 XBDAMB-00-0000-000000803
P2 67.2 XBDAMB-00-0000-000000703
Notes:
• For additional order codes NOT recommended for new designs please see the Appendix section starting on page 38 .
• XLamp XB-D LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
12
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
ORDER CODES SUGGESTED FOR NEW DESIGNS - COLOR (TJ = 25 °C) - CONTINUED
Minimum
Red-Orange Luminous Flux
(lm) @ 350 mA
Order Codes
Dominant
Kit Code Flux (lm)
Wavelengh (nm)
R2 114 XBDRDO-00-0000-000000E01
Q5 107 XBDRDO-00-0000-000000D01
01 610 - 620 Q4 100 XBDRDO-00-0000-000000C01
Q3 93.9 XBDRDO-00-0000-000000B01
Q2 87.4 XBDRDO-00-0000-000000A01
R2 114 XBDRDO-00-0000-000000E02
Q5 107 XBDRDO-00-0000-000000D02
02 610 - 615 Q4 100 XBDRDO-00-0000-000000C02
Q3 93.9 XBDRDO-00-0000-000000B02
Q2 87.4 XBDRDO-00-0000-000000A02
Q4 100 XBDRDO-00-0000-000000C03
03 615 -620 Q3 93.9 XBDRDO-00-0000-000000B03
Q2 87.4 XBDRDO-00-0000-000000A03
Minimum
Red Luminous Flux
(lm) @ 350 mA
Order Codes
Dominant
Kit Code Flux (lm)
Wavelengh (nm)
P4 80.6 XBDRED-00-0000-000000901
01 620 - 630 P3 73.9 XBDRED-00-0000-000000801
P2 67.2 XBDRED-00-0000-000000701
P4 80.6 XBDRED-00-0000-000000902
02 620 - 625 P3 73.9 XBDRED-00-0000-000000802
P2 67.2 XBDRED-00-0000-000000702
Notes:
• For additional order codes NOT recommended for new designs please see the Appendix section starting on page 38 .
• XLamp XB-D LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
13
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
PC Amber data moved from XBD PCA Final Datasheet_180424_jlc.xlsx to tabs on this spreadsheet
100%
80%
Relative Radiant Power
60%
5000 K - 10,000 K CCT
20%
Royal Blue0%data from Prelim XBDROY SE800 Datasheet_3-15-2019-no it isn't, it's from here
380 430 480 530 580 630 680 730 780
Wavelength (nm)
100%
80%
Royal Blue
3700 K - 5000 mK CCT data from:
Relative Radiant Power
40%
Amber
Red-Orange
Red
20%
0%
380 430 480 530 580 630 680 730 780
Wavelength (nm)
14
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
120%
100%
Relative Luminous Flux
White
80% Blue
Green
60%
PC Amber
40% Amber
Red-Orange, Red
20%
120%
100%
Relative Radiant Flux
80%
40%
20%
0%
25 50 75 100 125 150
15
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
1000
900
800
Forward Current (mA)
700
600
500 White
400
300
200
100
0
Electrical Characteristics
2.0
(Tj = 25ºC) 2.5 3.0 3.5 4.0
1000
900
800
Forward Current (mA)
700
Royal Blue, Blue
600
Green
500 PC Amber
400 Amber
Red-Orange, Red
300
200
100
0
2.0 2.5 3.0 3.5 4.0
16
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
300%
250%
Relative Luminous Flux
200%
150% White
100%
50%
0%
0 100 200 300 400 500 600 700 800 900 1000
300%
250%
Relative Luminous Flux
200% Blue
Green
150% PC Amber
Amber
100% Red-Orange, Red
50%
0%
0 100 200 300 400 500 600 700 800 900 1000
17
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
Relative Intensity vs. Current (Tj = 25ºC)
royal blue
300%
250%
Relative Radiant Flux
200%
100%
50%
0%
0 100 200 300 400 500 600 700 800 900 1000
RELATIVE CHROMATICITY
Relative VS. CURRENT
Chromaticity Vs. (WARM WHITE)
Current, WW
0.020
T = 85 °C
J
0.015
0.010
0.005
ΔCCx
0.000
ΔCCy
-0.005
-0.010
-0.015
-0.020
0 100 200 300 400 500 600 700 800 900 1000
Current (mA)
18
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
0.020
I = 350 mA
F
0.015
0.010
0.005
ΔCCx
0.000
ΔCCy
-0.005
-0.010
-0.015
-0.020
0 25 50 75 100 125 150
Tsp (°C)
100%
80%
Relative Luminous Intensity
White
60%
Royal Blue, Blue, Green
PC Amber
40%
Amber, Red-Orange,
Red
20%
0%
-90 -70 -50 -30 -10 10 30 50 70 90
Angle (°)
19
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
THERMAL DESIGN
white
The maximum forward current is determined by the thermal resistanceroyal
between
blue
the LED junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
and optical characteristics.
1200 1200
600 600
400 400
Rj-a = 10°C/W Rj-a = 10°C/W
1200 1200
Blue
Green
1000 1000
Maximum Current (mA)
Maximum Current (mA)
800 800
600 600
400 400
Rj-a = 10°C/W Rj-a = 12°C/W
Rj-a = 15°C/W Rj-a = 15°C/W
200 200
Rj-a = 20°C/W Rj-a = 20°C/W
PC amber Rj-a = 25°C/W Rj-a = 25°C/W
0 amber 0
0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160
1200 1200
PC Amber Amber
1000 1000
Maximum Current (mA)
800 800
600 600
400 400
Rj-a = 10°C/W Rj-a = 10°C/W
Rj-a = 15°C/W Rj-a = 15°C/W
200 200
Rj-a = 20°C/W Rj-a = 20°C/W
Rj-a = 25°C/W Rj-a = 25°C/W
0 0
0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160
20
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
red-orange, red
THERMAL DESIGN - CONTINUED
1200
Red-Orange, Red
1000
Maximum Current (mA)
800
600
400
Rj-a = 10°C/W
Rj-a = 15°C/W
200
Rj-a = 20°C/W
Rj-a = 25°C/W
0
0 20 40 60 80 100 120 140 160
XLamp XB-D LEDs, except royal blue, are tested for luminous flux and placed into one of the following luminous‑flux groups. These
groups, appended with a 0, are used in the Bin Code “Luminous or radiant flux group.”
K2 30.6 35.2
K3 35.2 39.8
M2 39.8 45.7
M3 45.7 51.7
N2 51.7 56.8
N3 56.8 62
N4 62 67.2
P2 67.2 73.9
P3 73.9 80.6
P4 80.6 87.4
Q2 87.4 93.9
Q3 93.9 100
Q4 100 107
Q5 107 114
R2 114 122
R3 122 130
R4 130 139
R5 139 148
S2 143 156
S3 156 164
21
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
Royal blue XLamp XB-D LEDs are tested for radiant flux and sorted into one of the following radiant-flux bins.
34 550 575
35 575 600
36 600 625
37 625 650
38 650 675
39 675 700
40 700 725
Color XLamp XB-D LEDs are tested for dominant wavelength (DWL) and sorted into one of the DWL bins defined below.
22
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
Amber, red-orange, red and royal blue XLamp XB-D LEDs are tested for forward voltage and sorted into one of the forward voltage bins
defined below.
Forward Voltage Minimum Forward Voltage (V) Maximum Forward Voltage (V)
Group @ 350 mA @ 350 mA
B 1.75 2.0
C 2.0 2.25
D 2.25 2.5
E 2.5 2.75
F 2.75 3.0
G 3.0 3.25
H 3.25 3.5
23
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
24
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
25
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
XLamp XB-D PC amber LEDs are placed into the region defined by the following bounding coordinates.
Region x y
0.5469 0.4249
0.5700 0.4100
Y2
0.5900 0.4100
0.5610 0.4390
26
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
0.40 0.40
5000 K 5000 K
0.39 0.39
53
3S 3S
0.37
51
0.37
6500 K 2T 6500 K 2T
0.36 3B
0.36 3B
2S 2S
2C 2C
0.35 1T 0.35 1T
8000 K 3A 8000 K 3A
2B 2B
CCy
0.34
CCy
1S 2D 0.34 1S 2D
1C 1C
2A 3R 2A 3R
0.33 0T 0.33 0T
1B 1B
1D 2U 1D 2U
0S 0C ANSI 0S 0C 2R ANSI
0.32 1A
2R 0.32 1A
1U C78.377A 1U C78.377A
0B 0B
0D 0D
0.31 1R
0.31 1R
0A 0A
0U 0U
0.30 0.30
0R 0R
0.29 0.29
0.28 0.28
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCx CCx
0.40
5000 K
0.39
0.38 5700 K
3S
0.37
6500 K 50 2T
0.36 3B
2S
0.35 2C
1T
8000 K 3A
2B
0.34 1S 2D
1C
CCy
2A 3R
0.33 0T
1B
1D 2U
0S 0C 2R ANSI
0.32 1A
1U C78.377A
0B 0D
0.31 1R
0A
0U
0.30
0R
0.29
0.28
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCx
0.40 0.40
5000 K 5000 K
0.39 0.39
0.37
6500 K
3S
0.37 E2 3S
2T 6500 K 2T
0.36
E1 2S 3B 0.36
2S 3B
0.35 2C
1T 2C
3A 0.35 1T
8000 K 2B
8000 K 3A
CCy
0.34 1S 2B
CCy
1C 2D
0.34 1S 2D
3R 1C
2A
0.33 0T 3R
1B 2A
1D 2U 0.33 0T
1B
1D 2U
0S 0C 2R ANSI
0.32 1A
C78.377A 0S 0C 2R ANSI
1U 0.32 1A
0B 0D C78.377A
0.31 1U
1R 0B
0.31 0D
0A 1R
0U
0.30 0A
0R 0U
0.30
0.29 0R
0.29
0.28
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.28
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCx
CCx
27
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
0.46
0.45
2700 K
3000 K
0.44
E8
E7
0.43
3500 K
8C3
8C2
8B3
8B2
0.42 7C3
4000 K 7C2
E6
7B3 8C4
8C1
7B2 8B4
8B1
0.41 4500 K 6C3
7C1
7C4
6C2 7B4 8D3
8D2
8A3
E5
6B3 7B1 8A2
6C4 7D3
0.40 6B2 7D2 8D4
5C3 6C1 7A3
7A2 8A4 8D1
5000 K 5C2 6B4 8A1
6D3 7D4
CCy
E4
6D2 7A4
5B2 5C1 6A3 7A1
6D4
5B4 5D3 6A2
0.38 6D1
5B1 5D2 6A4
E3
4C
5A3 5D4 6A1
0.37 4B 5A2 5D1
3C 5A4 ANSI
4D 5A1 C78.377A
0.36 3B
4A
3D
0.35
3A
0.34
0.33
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCx
0.46
0.45
2700 K
3000 K
0.44
0.43 3500 K
F8
F7
8C3
8C2
8B3
8B2
0.42 7C3
4000 K 7C2 8C4
7B3 8C1
F6
7B2 8B4
8B1
0.41 4500 K 6C3
7C1
7C4
6C2 7B4 8D3
8D2
7B1 8A3
6B3 8A2
6C4 7D3
0.40
F5
6B2 7D2 8D4
5C3 6C1 7A3
7A2 8A4 8D1
5000 K 5C2 6B4 8A1
CCy
6D3 7D4
0.39 5B3 5C4 6B1
6D2 7A4
7D1
7A1
F4
5B2 5C1 6A3
6D4
5B4 5D3 6A2
0.38 5B1 5D2
6D1
4C 6A4
5A3 5D4 6A1
0.37 4B 5A2 5D1
3C 5A4 ANSI
4D 5A1 C78.377A
0.36 3B
4A
3D
0.35
3A
0.34
0.33
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCx
28
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
0.46
0.45
0.44
Y2
CCy
0.43
0.42
0.41
0.40
0.53
0.54
0.55
0.56
0.57
0.58
0.59
0.60
0.61
CCx
The following table provides the chromaticity bins associated with chromaticity kits, which are specified as part of the order code.
51 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S
53 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S
Cool
50 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D
White
E1 1A, 1B, 1C, 1D
E2 2A, 2B, 2C, 2D
E3 3A, 3B, 3C, 3D
F4 3C, 3D, 4A, 4B
Neutral
E4 4A, 4B, 4C, 4D
White
F5 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4
E5 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4
F6 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4
E6 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4
F7 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4
Warm
White E7 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4
F8 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4
E8 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4
29
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
Bin codes and order codes for XB-D LEDs are configured in the following manner:
Series Series
XBD = XB-D XBD = XB-D
30
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
In testing, Cree LED has found XLamp XB-D LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a
general guideline, Cree LED recommends that users follow the recommended soldering profile provided by the manufacturer of the solder
paste used, and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
tP
TP Critical Zone
TL to TP
Ramp-up
TL tS
Temperature
Tsmax
Tsmin
ts Ramp-down
Preheat
25
t 25˚C to Peak
Time IPC/JEDEC J-STD-020C
Note: All temperatures refer to topside of the package, measured on the package body surface.
31
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
NOTES
Measurements
The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only
and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number
of factors that are not within Cree LED’s control and are not intended or provided as operational specifications for the products. Calculated
values are provided for informational purposes only and are not intended or provided as specifications.
Lumen Maintenance
Cree LED now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen
maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree LED’s lumen maintenance testing and
forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive
current affect the LED junction temperature.
Moisture Sensitivity
Cree LED recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to
soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XB-D LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in
conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of storage condition, Cree LED recommends sealing any unsoldered LEDs
in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree LED representative or from the Product
Ecology section of the Cree LED website.
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree LED representative
to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available
upon request.
32
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
NOTES - CONTINUED
UL® Recognized Component
This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED
package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
33
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
MECHANICAL DIMENSIONS
4 4 4 3 3 3 2 1 21 1 2
REVISONS REVISONS
REVISONS
RMATION
ATION
N REV REVREV DESCRIPTIONDESCRIPTION
DESCRIPTION BY BY BYDATE
DATE DATE
APP'D APP'D
APP'D
D
S PLOT
LOT Top View B B B ADDED Side
ADDED
ADDED
NOTCH View
NOTCH
NOTCH
TO TO BACKSIDE
BACKSIDE
TO BACKSIDE DC DC10/16/12 10/16/12
10/16/12
DC
ED
TO TO
ANY ANYANY
C C C CORRECTED
CORRECTED
CORRECTED
SOLDERPAD SOLDERPAD
SOLDERPAD
DIMENSIONDIMENSION
DC DC
DIMENSION 7/1/15 7/1/15
DC7/1/15
D D D ADDED ADDED
ADDED
ALTERNATE ALTERNATE
ALTERNATE
VIEWS VIEWS
VIEWS DC 8/19/15
DC 8/19/15
DC8/19/15
* The height of XB-D white LEDs is 1.97±0.16 mm for LEDs in the E6-E8, F6-F8, and Z6-Z8 chromaticity regions.
1.84*
4* 1.63 1.631.63 2.292.29
2.29 REF REFREF
2.292.29
2.29 REF REFREF D D D
76 0.760.76 0.46 0.460.46
0.46 0.460.46
2.286
2.2862.286 2.292.29
2.29 REF REFREF 2.292.29
2.29 REF REFREF
2.29 2.292.29
0.39 0.390.39
B B B
34
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED0.85
logo is0.85 0.85 of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of
a trademark, REV 15
UL LLC.
R1.09 R1.09
0.82 0.82
C C
0.65 0.65 0.36 0.36
XLAMP ® XB-D LED 0.92 0.92
PRIMARY
PRIMARY
0.85 0.85
0.25 0.25
0.85 0.85
A
ALL DIM
0.17 0.17
UNLESSUNLESS
OTHE
A A Recommended PCB Solder Pad Recommended Stencil Pattern DIME
DIMENSION
MILLIMEA
MILLIMETERS
(Hatched Area is Opening) TOLERA
TOLERANCE U
RECOMMENDED
RECOMMENDED STENCIL
STENCIL PATTERN
PATTERN .XX ± .X.
RECOMMENDED PCB SOLDER
PAD PAD
.XXX± .X.
RECOMMENDED PCB SOLDER (HATCHED
(HATCHED AREA
AREA IS IS OPENING)
OPENING) X° ± X°.
THIRDTHIRD
ANGLEANGLE PROJECTION
PROJECTION FOR SHE
FOR SHEET ME
.X ± .X 1
.XX ± .X.
.XXX± .X
X°.
X° ± .
SURFAC
SURFACE FIN1
6 6 5 5 4 4 3 3
35
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
6 5 4 3 2 1
NOTICE
6 5 4 3 2 REVISONS 1
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION REV DESCRIPTION BY DATEAPP'D
CONTAINED WITHIN
NOTICE ARE THE PROPRIETARY AND REVISONS
CONFIDENTIAL
CREE INFORMATION
CONFIDENTIAL. THIS OFAND
PLOT CREE,
THEINC. THIS PLOT
INFORMATION A
REV Released DC 10/23/11
BY JL
DATEAPP'D
MAY NOT
CONTAINED BE COPIED,
WITHIN REPRODUCED
ARE WRITTEN
THE OR DISCLOSED
PROPRIETARY AND TO ANY DESCRIPTION
UNAUTHORIZED PERSON
THE WITHOUTCONSENT AB ADDED CATHODE
Released AND ANODE NOTE 2/26/12
DC 10/23/11
CONFIDENTIAL
OF CREE INC. INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSONTHE WRITTEN
WITHOUTCONSENT DETAIL B BC CHANGED POCKET DIMS AND
DC
DC
TOLERANCES
ADDED CATHODE AND ANODE NOTEDC 2/26/12
JL
8/3/12
OF CREE INC.
XLAMP ® XB-D LED SCALE 2 : 1 CD
D
CHANGEDPOCKET
CHANGED POCKETDIMS
DIM TO
ANDINSIDE OF POCKET
DC
DC
CHANGED POCKET DIM TO INSIDE DC
2/1/18 IN BOTTOM VIEW
8/3/12
TOLERANCES
OF POCKET
2/1/18 IN BOTTOM VIEW
D
D D
D
All Cree LED carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
C
1.50 +.10/-.00 Except as noted, all dimensions in mm.
C
C
1.50 +.10/-.00
C
4.00 ±.10 1.75 ±.10
4.00
2.00 ±.10
±.10 CATHODE SIDE 1.75 ±.10
B
B
2.00 ±.10 CATHODE SIDE B
B 2.60+/-0.1mm
4° 2.60+/-0.1mm
12.00 Nominal 4°
12.30
12.00 Max
Nominal
1.5±.1 10.25 ±.1012.30 Max
4.0±.1
10.25 ±.10
8.0±.1
1.75±.10 ANODE SIDE .30 ± .102.5±.1 B
8.00 ±.10 ANODE SIDE .30 ± .10
B Cathode Side 5.50 ±.10 B
8.00 ±.10
B 5.50 ±.10
1.00 ± .10
1.00 ± .10
+.3
12.0
.0
2.05+/-0.1
2.05+/-0.1 SECTION B-B REFERENCE VENDOR PART NUMBER 020246
Loaded Pockets
Trailer Leader
(1,000 Lamps)
160mm (min) of 400mm (min) of
empty pockets empty pockets with
sealed with tape at least 100mm
(20 pockets min.) sealed by tape
(50 empty pockets min.)
Cover Tape
Pocket Tape
13mm
7"
36
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
PACKAGING
Unpackaged Reel
Vacuum-Sealed
Vacuum-Sealed
Moisture Barrier Bag
Moisture Barrier Bag
Label
CREE Binwith
Code Cree Bin
Code,
& Qty,
Barcode LabelLot #
Label with Cree Bin Code,
Label with
Label with Cree Bin
Customer
Quantity, Reel ID Code,
P/N, Qty,Qty,
Lot #, Lot
PO # #
Packaged Reel
Patent Label
Boxed Reel
37
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
The following order codes are active and valid order codes, but higher performance options are also available. Please see page 4 -
page 9 for order codes of XLamp XB-D white LEDs that could serve as alternatives for the order codes set forth below.
Flux (lm)
Kit CCT Code No CRI Minimum 70 CRI Minimum 80 CRI Mimimum
@ 85 °C
Flux (lm)
Kit CCT Code No CRI Minimum 70 CRI Minimum Standard CRI 80 CRI Minimum
@ 85 °C
XBDAWT-00-0000- XBDAWT-00-0000-
R2 114
000000EE3 00000BEE3
XBDAWT-00-0000-
E3 5000 K Q5 107
00000LDE3
XBDAWT-00-0000-
Q4 100
00000LCE3
XBDAWT-00-0000- XBDAWT-00-0000-
Q5 107
00000LDF4 00000HDF4
F4 4750 K
XBDAWT-00-0000-
Q4 100
00000LCF4
XBDAWT-00-0000- XBDAWT-00-0000-
Q5 107
00000LDE4 00000HDE4
E4 4500 K
XBDAWT-00-0000-
Q4 100
00000LCE4
Notes:
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 32).
• XLamp XB-D LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
• Typical CRI for Neutral White, 3700 K - 5000 K CCT is 75.
• Typical CRI for Warm White, 2600 K - 3700 K CCT is 80.
• Minimum CRI for 70 CRI Minimum Cool White is 70.
• Minimum CRI for 80 CRI Minimum White is 80.
38
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
Flux (lm)
Kit CCT Code No CRI Minimum 70 CRI Minimum Standard CRI 80 CRI Minimum
@ 85 °C
XBDAWT-00-0000- XBDAWT-00-0000-
Q5 107
00000LDF5 00000HDF5
XBDAWT-00-0000-
F5 4250 K Q4 100
00000LCF5
XBDAWT-00-0000-
Q3 93.9
00000LBF5
XBDAWT-00-0000- XBDAWT-00-0000-
Q5 107
00000LDE5 00000HDE5
XBDAWT-00-0000-
E5 4000 K Q4 100
00000LCE5
XBDAWT-00-0000-
Q3 93.9
00000LBE5
Flux (lm)
Kit CCT Code No CRI Minimum 70 CRI Minimum Standard CRI 80 CRI Minimum 90 CRI Minimum
@ 85 °C
XBDAWT-00-
Q4 100
0000-00000LCF6
F6 3750 K
XBDAWT-00-
Q3 93.9
0000-00000LBF6
XBDAWT-00-
Q4 100
0000-00000LCE6
E6 3500 K
XBDAWT-00-
Q3 93.9
0000-00000LBE6
XBDAWT-00-
Q4 100
0000-00000LCF7
XBDAWT-00-
F7 3250 K Q3 93.9
0000-00000LBF7
XBDAWT-00-
Q2 87.4
0000-00000LAF7
XBDAWT-00-
Q4 100
0000-00000LCE7
XBDAWT-00-
E7 3000 K Q3 93.9
0000-00000LBE7
XBDAWT-00-
Q2 87.4
0000-00000LAE7
Notes:
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 32).
• XLamp XB-D LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
• Typical CRI for Neutral White, 3700 K - 5000 K CCT is 75.
• Typical CRI for Warm White, 2600 K - 3700 K CCT is 80.
• Minimum CRI for 70 CRI Minimum Cool White is 70.
• Minimum CRI for 80 CRI Minimum White is 80.
39
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
Minimum
Chromaticity Luminous Flux Order Codes
(lm) @ 350 mA
Flux (lm)
Kit CCT Code No CRI Minimum 70 CRI Minimum Standard CRI 80 CRI Minimum 90 CRI Minimum
@ 85 °C
XBDAWT-00-
Q4 100
0000-00000LBF8
XBDAWT-00-
F8 2850 K Q3 93.9
0000-00000LAF8
XBDAWT-00-
Q2 87.4
0000-00000L9F8
XBDAWT-00-
Q3 93.9
0000-00000LBE8
XBDAWT-00-
E8 2700 K Q2 87.4
0000-00000LAE8
XBDAWT-00-
P4 80.6
0000-00000L9E8
Notes:
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 32).
• XLamp XB-D LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
• Typical CRI for Neutral White, 3700 K - 5000 K CCT is 75.
• Typical CRI for Warm White, 2600 K - 3700 K CCT is 80.
• Minimum CRI for 70 CRI Minimum Cool White is 70.
• Minimum CRI for 80 CRI Minimum White is 80.
40
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
The following order codes are active and valid order codes, but higher performance options are also available. Please see page 10 -
page 13 for order codes of XLamp XB-D color LEDs that could serve as alternatives for the order codes set forth below.
Color, TJ = 25 °C
Minimum
Blue Luminous Flux
(lm) @ 350 mA Order Codes
Dominant
Kit Code Flux (lm)
Wavelengh (nm)
Minimum
Green Luminous Flux
(lm) @ 350 mA Order Codes
Dominant
Kit Code Flux (lm)
Wavelengh (nm)
Q4 100 XBDGRN-00-0000-000000C01
01 520 - 535 Q3 93.9 XBDGRN-00-0000-000000B01
Q2 87.4 XBDGRN-00-0000-000000A01
Q4 100 XBDGRN-00-0000-000000C02
02 520 -530 Q3 93.9 XBDGRN-00-0000-000000B02
Q2 87.4 XBDGRN-00-0000-000000A02
Q4 100 XBDGRN-00-0000-000000C03
03 525 - 535 Q3 93.9 XBDGRN-00-0000-000000B03
Q2 87.4 XBDGRN-00-0000-000000A03
Minimum
Amber Luminous Flux
(lm) @ 350 mA Order Codes
Dominant
Kit Code Flux (lm)
Wavelengh (nm)
N4 62 XBDAMB-00-0000-000000601
01 585 - 595
N3 56.8 XBDAMB-00-0000-000000501
N4 62 XBDAMB-00-0000-000000603
03 590 - 595
N3 56.8 XBDAMB-00-0000-000000503
Notes:
• XLamp XB-D LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
41
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.
XLAMP ® XB-D LED
Minimum
Red-Orange Luminous Flux
(lm) @ 350 mA Order Codes
Dominant
Kit Code Flux (lm)
Wavelengh (nm)
P4 80.6 XBDRDO-00-0000-000000901
01 610 - 620
P3 73.9 XBDRDO-00-0000-000000801
P4 80.6 XBDRDO-00-0000-000000902
02 610 - 615
P3 73.9 XBDRDO-00-0000-000000802
P4 80.6 XBDRDO-00-0000-000000903
03 615 -620
P3 73.9 XBDRDO-00-0000-000000803
Minimum
Red Luminous Flux
(lm) @ 350 mA Order Codes
Dominant
Kit Code Flux (lm)
Wavelengh (nm)
N4 62 XBDRED-00-0000-000000601
01 620 - 630 N3 56.8 XBDRED-00-0000-000000501
N2 51.7 XBDRED-00-0000-000000401
N4 62 XBDRED-00-0000-000000602
02 620 - 625 N3 56.8 XBDRED-00-0000-000000502
N2 51.7 XBDRED-00-0000-000000402
Notes:
• XLamp XB-D LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
42
© 2011-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and CLD-DS45
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp® is a registered trademark of Cree LED. UL® and the UL logo are registered trademarks of REV 15
UL LLC.