Professional Documents
Culture Documents
Cree LED / 4001 E. Hwy. 54, Suite 2000 / Durham, NC 27709 USA / +1.919.313.5330 / www.cree-led.com
1
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
TABLE OF CONTENTS
Characteristics........................................................................................................................................................................................................ 3
Flux Characteristics, High Density EasyWhite® Order Codes and Bins............................................................................................................... 4
Flux Characteristics, High Density ANSI White Order Codes and Bins................................................................................................................ 7
Flux Characteristics, High Density Broadcast Order Codes and Bins............................................................................................................... 10
Flux Characteristics, High Intensity EasyWhite® Order Codes and Bins........................................................................................................... 11
Flux Characteristics, High Intensity ANSI White Order Codes and Bins............................................................................................................ 14
Flux Characteristics, High Intensity Broadcast Order Codes and Bins.............................................................................................................. 16
Relative Spectral Power Distribution................................................................................................................................................................... 17
Relative Flux vs. Junction Temperature............................................................................................................................................................... 17
Electrical Characteristics (TJ = 85 °C).................................................................................................................................................................. 18
Relative Flux vs. Current (TJ = 85 °C)................................................................................................................................................................... 19
Relative Chromaticity vs Current (Warm White)................................................................................................................................................. 20
Relative Chromaticity vs Temperature (Warm White)......................................................................................................................................... 21
Typical Spatial Distribution................................................................................................................................................................................... 21
Thermal Design..................................................................................................................................................................................................... 22
Performance Groups - Luminous Flux (TJ = 85 °C)............................................................................................................................................. 23
Performance Groups - Chromaticity.................................................................................................................................................................... 23
EasyWhite® Chromaticity Regions Plotted on the 1931 CIE Curve.................................................................................................................... 27
ANSI Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions........................................................................................... 28
Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions.............................................................................. 29
Bin and Order-Code Format.................................................................................................................................................................................. 30
Reflow Soldering Characteristics......................................................................................................................................................................... 31
Notes..................................................................................................................................................................................................................... 32
Mechanical Dimensions....................................................................................................................................................................................... 34
Electrical Configuration........................................................................................................................................................................................ 36
Tape and Reel........................................................................................................................................................................................................ 37
Packaging.............................................................................................................................................................................................................. 39
2
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
CHARACTERISTICS
XHP70.3 LEDs are tested and binned in the 12‑V configuration. See the Mechanical Dimensions section on page 34 for pad layout
options.
Reverse voltage V 1
Note:
◊ Thermal resistance measurement was performed per the JEDEC JESD51-14 standard. See the Thermal Resistance Measurement application note
for more details.
* Data for the 6‑V configuration is calculated and for reference only.
3
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
The following table provides order codes for XLamp XHP70.3 High Density LEDs. For a complete description of how the flux and
chromaticity groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section
(page 30).
XHP70D-00-0000-
P4 1965 2164
0D0BP450E
XHP70D-00-0000-
70 P2 1830 2015 50E
0D0BP250E
XHP70D-00-0000-
N4 1710 1883
0D0BN450E
XHP70D-00-0000-
P2 1830 2015
0D0HP250G
XHP70D-00-0000-
N4 1710 1883
0D0HN450G
5000 K 80 50G
XHP70D-00-0000-
N2 1590 1751
0D0HN250G
XHP70D-00-0000-
M4 1485 1635
0D0HM450G
XHP70D-00-0000-
N2 1590 1751
0D0UN250G
XHP70D-00-0000-
90 M4 1485 1635 50G
0D0UM450G
XHP70D-00-0000-
M2 1380 1520
0D0UM250G
Notes
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 32).
• XLamp XHP70.3 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
• Flux values @ 25 °C are calculated and for reference only.
4
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
FLUX CHARACTERISTICS, HIGH DENSITY EASYWHITE® ORDER CODES AND BINS - CONTINUED
XHP70D-00-0000-
P4 1965 2164
0D0BP445E
XHP70D-00-0000-
70 P2 1830 2015 45E
0D0BP245E
XHP70D-00-0000-
N4 1710 1883
0D0BN445E
XHP70D-00-0000-
N4 1710 1883
0D0HN445G
XHP70D-00-0000-
4500 K 80 N2 1590 1751 45G
0D0HN245G
XHP70D-00-0000-
M4 1485 1635
0D0HM445G
XHP70D-00-0000-
M4 1485 1635
0D0UM445G
XHP70D-00-0000-
90 M2 1380 1520 45G
0D0UM245G
XHP70D-00-0000-
K4 1290 1420
0D0UK445G
XHP70D-00-0000-
P4 1965 2164
0D0BP440E
XHP70D-00-0000-
70 P2 1830 2015 40E
0D0BP240E
XHP70D-00-0000-
N4 1710 1883
0D0BN440E
XHP70D-00-0000- XHP70D-00-0000-
N4 1710 1883
0D0HN440H 0D0HN440G
XHP70D-00-0000- XHP70D-00-0000-
4000 K 80 N2 1590 1751 40H 40G
0D0HN240H 0D0HN240G
XHP70D-00-0000- XHP70D-00-0000-
M4 1485 1635
0D0HM440H 0D0HM440G
XHP70D-00-0000- XHP70D-00-0000-
M4 1485 1635
0D0UM440H 0D0UM440G
XHP70D-00-0000- XHP70D-00-0000-
90 M2 1380 1520 40H 40G
0D0UM240H 0D0UM240G
XHP70D-00-0000- XHP70D-00-0000-
K4 1290 1420
0D0UK440H 0D0UK440G
Notes
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 32).
• XLamp XHP70.3 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
• Flux values @ 25 °C are calculated and for reference only.
5
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
FLUX CHARACTERISTICS, HIGH DENSITY EASYWHITE® ORDER CODES AND BINS - CONTINUED
XHP70D-00-0000-
P2 1830 2015
0D0BP235E
XHP70D-00-0000-
70 N4 1710 1883 35E
0D0BN435E
XHP70D-00-0000-
N2 1590 1751
0D0BN235E
XHP70D-00-0000- XHP70D-00-0000-
N4 1710 1883
0D0HN435H 0D0HN435G
XHP70D-00-0000- XHP70D-00-0000-
3500 K 80 N2 1590 1751 35H 35G
0D0HN235H 0D0HN235G
XHP70D-00-0000- XHP70D-00-0000-
M4 1485 1635
0D0HM435H 0D0HM435G
XHP70D-00-0000- XHP70D-00-0000-
M4 1485 1635
0D0UM435H 0D0UM435G
XHP70D-00-0000- XHP70D-00-0000-
90 M2 1380 1520 35H 35G
0D0UM235H 0D0UM235G
XHP70D-00-0000- XHP70D-00-0000-
K4 1290 1420
0D0UK435H 0D0UK435G
XHP70D-00-0000-
P2 1830 2015
0D0BP230E
XHP70D-00-0000-
70 N4 1710 1883 30E
0D0BN430E
XHP70D-00-0000-
N2 1590 1751
0D0BN230E
XHP70D-00-0000- XHP70D-00-0000-
N2 1590 1751
0D0HN230H 0D0HN230G
3000 K 80 30H 30G
XHP70D-00-0000- XHP70D-00-0000-
M4 1485 1635
0D0HM430H 0D0HM430G
XHP70D-00-0000- XHP70D-00-0000-
M2 1380 1520
0D0UM230H 0D0UM230G
XHP70D-00-0000- XHP70D-00-0000-
90 K4 1290 1420 30H 30G
0D0UK430H 0D0UK430G
XHP70D-00-0000- XHP70D-00-0000-
K2 1200 1321
0D0UK230H 0D0UK230G
XHP70D-00-0000- XHP70D-00-0000-
M4 1485 1635
0D0HM427H 0D0HM427G
80 27H 27G
XHP70D-00-0000- XHP70D-00-0000-
M2 1380 1520
0D0HM227H 0D0HM227G
XHP70D-00-0000- XHP70D-00-0000-
2700 K K4 1290 1420
0D0UK427H 0D0UK427G
XHP70D-00-0000- XHP70D-00-0000-
90 K2 1200 1321 27H 27G
0D0UK227H 0D0UK227G
XHP70D-00-0000- XHP70D-00-0000-
J4 1120 1233
0D0UJ427H 0D0UJ427G
Notes
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 32).
• XLamp XHP70.3 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
• Flux values @ 25 °C are calculated and for reference only.
6
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
FLUX CHARACTERISTICS, HIGH DENSITY ANSI WHITE ORDER CODES AND BINS
The following table provides order codes for XLamp XHP70.3 High Density LEDs. For a complete description of how the flux and
chromaticity groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page
30).
Notes
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 32).
• XLamp XHP70.3 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
• Flux values @ 25 °C are calculated and for reference only.
7
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
FLUX CHARACTERISTICS, HIGH DENSITY ANSI WHITE ORDER CODES AND BINS - CONTINUED
Notes
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 32).
• XLamp XHP70.3 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
• Flux values @ 25 °C are calculated and for reference only.
8
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
FLUX CHARACTERISTICS, HIGH DENSITY ANSI WHITE ORDER CODES AND BINS - CONTINUED
Notes
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 32).
• XLamp XHP70.3 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
• Flux values @ 25 °C are calculated and for reference only.
9
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
The following table provides order codes for XLamp XHP70.3 High Density Broadcast LEDs. For a complete description of how the flux
and chromaticity groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section
(page 30).
Notes
• TLCI refers to the European Broadcast Union’s Television Lighting Consistency Index 2012, which aids broadcasters in assessing the
colorimetric quality of lighting in their production environment. Cree LED maintains a tolerance of ±2 on TLCI measurements. See the Measurements
section (page 32).
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 32).
• XLamp XHP70.3 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
• Flux values @ 25 °C are calculated and for reference only.
10
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
The following table provides order codes for XLamp XHP70.3 High Intensity LEDs. For a complete description of how the flux and
chromaticity groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page
30).
XHP70D-H0-0000-
P2 1830 2015
0D0BP250E
70 50E
XHP70D-H0-0000-
N4 1710 1883
0D0BN450E
XHP70D-H0-0000-
N2 1590 1751
0D0HN250G
5000 K 80 50G
XHP70D-H0-0000-
M4 1485 1635
0D0HM450G
XHP70D-H0-0000-
M4 1485 1635
0D0UM450G
90 50G
XHP70D-H0-0000-
M2 1380 1520
0D0UM250G
XHP70D-H0-0000-
P2 1830 2015
0D0BP245E
70 45E
XHP70D-H0-0000-
N4 1710 1883
0D0BN445E
XHP70D-H0-0000-
N2 1590 1751
0D0HN245G
4500 K 80 45G
XHP70D-H0-0000-
M4 1485 1635
0D0HM445G
XHP70D-H0-0000-
M2 1380 1520
0D0UM245G
90 45G
XHP70D-H0-0000-
K4 1290 1420
0D0UK445G
Notes
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 32).
• XLamp XHP70.3 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
• Flux values @ 25 °C are calculated and for reference only.
11
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
FLUX CHARACTERISTICS, HIGH INTENSITY EASYWHITE® ORDER CODES AND BINS - CONTINUED
XHP70D-H0-0000-
P2 1830 2015
0D0BP240E
70 40E
XHP70D-H0-0000-
N4 1710 1883
0D0BN440E
XHP70D-H0-0000- XHP70D-H0-0000-
N2 1590 1751
0D0HN240H 0D0HN240G
80 40H 40G
XHP70D-H0-0000- XHP70D-H0-0000-
M4 1485 1635
0D0HM440H 0D0HM440G
XHP70D-H0-0000- XHP70D-H0-0000-
4000 K M2 1380 1520
0D0UM240H 0D0UM240G
90 40H 40G
XHP70D-H0-0000- XHP70D-H0-0000-
K4 1290 1420
0D0UK440H 0D0UK440G
XHP70D-H0-0000- XHP70D-H0-0000-
K4 1290 1420
0D0ZK440H 0D0ZK440G
XHP70D-H0-0000- XHP70D-H0-0000-
95 K2 1200 1321 40H 40G
0D0ZK240H 0D0ZK240G
XHP70D-H0-0000- XHP70D-H0-0000-
J4 1120 1233
0D0ZJ440H 0D0ZJ440G
XHP70D-H0-0000-
N4 1710 1883
0D0BN435E
70 35E
XHP70D-H0-0000-
N2 1590 1751
0D0BN235E
XHP70D-H0-0000- XHP70D-H0-0000-
N2 1590 1751
0D0HN235H 0D0HN235G
80 35H 35G
XHP70D-H0-0000- XHP70D-H0-0000-
M4 1485 1635
0D0HM435H 0D0HM435G
XHP70D-H0-0000- XHP70D-H0-0000-
K4 1290 1420
0D0UK435H 0D0UK435G
3500 K 90 35H 35G
XHP70D-H0-0000- XHP70D-H0-0000-
K2 1200 1321
0D0UK235H 0D0UK235G
XHP70D-H0-0000- XHP70D-H0-0000-
K2 1200 1321
0D0ZK235H 0D0ZK235G
XHP70D-H0-0000- XHP70D-H0-0000-
J4 1120 1233
0D0ZJ435H 0D0ZJ435G
95 35H 35G
XHP70D-H0-0000- XHP70D-H0-0000-
J2 1040 1145
0D0ZJ235H 0D0ZJ235G
XHP70D-H0-0000- XHP70D-H0-0000-
H4 970 1068
0D0ZH435H 0D0ZH435G
Notes
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 32).
• XLamp XHP70.3 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
• Flux values @ 25 °C are calculated and for reference only.
12
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
FLUX CHARACTERISTICS, HIGH INTENSITY EASYWHITE® ORDER CODES AND BINS - CONTINUED
XHP70D-H0-0000-
N4 1710 1883
0D0BN430E
70 30E
XHP70D-H0-0000-
N2 1590 1751
0D0BN230E
XHP70D-H0-0000- XHP70D-H0-0000-
N2 1590 1751
0D0HN230H 0D0HN230G
80 30H 30G
XHP70D-H0-0000- XHP70D-H0-0000-
M4 1485 1635
0D0HM430H 0D0HM430G
XHP70D-H0-0000- XHP70D-H0-0000-
K4 1290 1420
0D0UK430H 0D0UK430G
3000 K 90 30H 30G
XHP70D-H0-0000- XHP70D-H0-0000-
K2 1200 1321
0D0UK230H 0D0UK230G
XHP70D-H0-0000- XHP70D-H0-0000-
K2 1200 1321
0D0ZK230H 0D0ZK230G
XHP70D-H0-0000- XHP70D-H0-0000-
J4 1120 1233
0D0ZJ430H 0D0ZJ430G
95 30H 30G
XHP70D-H0-0000- XHP70D-H0-0000-
J2 1040 1145
0D0ZJ230H 0D0ZJ230G
XHP70D-H0-0000- XHP70D-H0-0000-
H4 970 1068
0D0ZH430H 0D0ZH430G
XHP70D-H0-0000- XHP70D-H0-0000-
M4 1485 1635
0D0HM427H 0D0HM427G
80 27H 27G
XHP70D-H0-0000- XHP70D-H0-0000-
M2 1380 1520
0D0HM227H 0D0HM227G
XHP70D-H0-0000- XHP70D-H0-0000-
K2 1200 1321
0D0UK227H 0D0UK227G
90 27H 27G
XHP70D-H0-0000- XHP70D-H0-0000-
J4 1120 1233
0D0UJ427H 0D0UJ427G
2700 K
XHP70D-H0-0000- XHP70D-H0-0000-
J4 1120 1233
0D0ZJ427H 0D0ZJ427G
XHP70D-H0-0000- XHP70D-H0-0000-
J2 1040 1145
0D0ZJ227H 0D0ZJ227G
95 27H 27G
XHP70D-H0-0000- XHP70D-H0-0000-
H4 970 1068
0D0ZH427H 0D0ZH427G
XHP70D-H0-0000- XHP70D-H0-0000-
H2 900 991
0D0ZH227H 0D0ZH227G
Notes
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 32).
• XLamp XHP70.3 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
• Flux values @ 25 °C are calculated and for reference only.
13
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
FLUX CHARACTERISTICS, HIGH INTENSITY ANSI WHITE ORDER CODES AND BINS
The following table provides order codes for XLamp XHP70.3 High Intensity LEDs. For a complete description of how the flux and
chromaticity groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page
30).
Notes
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 32).
• XLamp XHP70.3 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
• Flux values @ 25 °C are calculated and for reference only.
14
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
FLUX CHARACTERISTICS, HIGH INTENSITY ANSI WHITE ORDER CODES AND BINS - CONTINUED
Notes
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 32).
• XLamp XHP70.3 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
• Flux values @ 25 °C are calculated and for reference only.
15
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
The following table provides order codes for XLamp XHP70.3 High Intensity Broadcast LEDs. For a complete description of how the flux
and chromaticity groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section
(page 30).
Notes
• TLCI refers to the European Broadcast Union’s Television Lighting Consistency Index 2012, which aids broadcasters in assessing the
colorimetric quality of lighting in their production environment. Cree LED maintains a tolerance of ±2 on TLCI measurements. See the Measurements
section (page 32).
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 32).
• XLamp XHP70.3 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
• Flux values @ 25 °C are calculated and for reference only.
16
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
100%
80%
Relative Radiant Power
60%
6500 K, 68 CRI
3000 K, 80 CRI
40%
20%
0%
380 430 480 530 580 630 680 730 780
Wavelength (nm)
120%
100%
Relative Luminous Flux
80%
60%
40%
20%
0%
25 50 75 100 125 150
17
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
7200
6400
5600
Forward Current (mA)
4800
4000
6V
3200
2400
1600
800
0
Electrical Characteristics
5.00 (Tj = 85°C)
5.25 5.50 5.75 6.00 6.25
3600
3200
2800
Forward Current (mA)
2400
2000
12 V
1600
1200
800
400
0
10.0 10.5 11.0 11.5 12.0 12.5
18
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
300%
250%
Relative Luminous Flux
200%
150% 6V
100%
50%
0%
300%
250%
Relative Luminous Flux
200%
150% 12 V
100%
50%
0%
0 400 800 1200 1600 2000 2400 2800 3200 3600
19
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
0.020
0.016
0.012 6V
0.008
0.004
ΔCCx
0.000
ΔCCy
-0.004
-0.008
-0.012
-0.016
-0.020
0 800 1600 2400 3200 4000 4800 5600 6400 7200
0.020
0.016
0.012 12 V
0.008
0.004
ΔCCx
0.000
ΔCCy
-0.004
-0.008
-0.012
-0.016
-0.020
0 400 800 1200 1600 2000 2400 2800 3200 3600
Current (mA)
20
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
0.020
0.016
0.012
0.008
0.004
ΔCCx
0.000
ΔCCy
-0.004
-0.008
-0.012
-0.016
-0.020
25 50 75 100 125 150
Tj (°C)
100%
80%
Relative Luminous Intensity
60%
HD
HI
40%
20%
0%
-90 -70 -50 -30 -10 10 30 50 70 90
Angle (º)
21
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
THERMAL DESIGN
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
and optical characteristics.
7500
7000
6500
6000
Maximum Current (mA)
5500
5000
4500
4000
6V
3500
3000
2500
Rj-a = 0.5°C/W
2000
Rj-a = 1°C/W
1500
1000
Rj-a = 2°C/W
500 Rj-a = 3°C/W
0
0 20 40 60 80 100 120 140 160
3750
3500
3250
3000
Maximum Current (mA)
2750
2500
2250
2000
12 V
1750
1500
1250 Rj-a = 0.5°C/W
1000
Rj-a = 1°C/W
750
Rj-a = 2°C/W
500
250 Rj-a = 3°C/W
0
0 20 40 60 80 100 120 140 160
Ambient Temperature (ºC)
22
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
XLamp XHP70.3 LEDs are tested for luminous flux and placed into one of the following luminous-flux groups.
H2 900 970
H4 970 1040
J2 1040 1120
J4 1120 1200
K2 1200 1290
K4 1290 1380
M2 1380 1485
M4 1485 1590
N2 1590 1710
N4 1710 1830
P2 1830 1965
P4 1965 2100
Q2 2100 2260
XLamp XHP70.3 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates.
Code CCT x y
0.3777 0.3739
0.3797 0.3816
40H 4000 K
0.3861 0.3855
0.3838 0.3777
0.4022 0.3858
0.4053 0.3942
35H 3500 K
0.4125 0.3977
0.4091 0.3891
0.4287 0.3975
0.4328 0.4064
30H 3000 K
0.4390 0.4086
0.4347 0.3996
0.4524 0.4048
0.4574 0.4140
27H 2700 K
0.4633 0.4154
0.4581 0.4062
23
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
24
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
25
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
26
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
0.44
2700 K
ANSI C78.377 Quadrangle
0.43 3000 K
EasyWhite 5-Step
0.42 EasyWhite 3-Step
3500 K
EasyWhite 2-Step
0.41
4000 K
0.40
4500 K
0.39
0.38 5000 K
0.37
5700 K
CCy
0.36
6500 K
0.35
0.34
8000 K
0.33
0.32
0.31
0.30
0.29
0.28
0.27
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCx
27
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
ANSI STANDARD COOL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
0.40
5000 K
0.39
0.38 5700 K
0.37
6500 K 2T
0.36
2S
DT
0.35 2C
1T
8000 K 2B
CCy
0.34 1S 2D
1C
2A
0.33 0T
1B
1D 2U
0S 0C 2R ANSI
0.32 1A
1U C78.377A
0B 0D
0.31 1R
0A
0U
0.30
0R
0.29
0.28
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCx
0.40 0.40
5000 K 5000 K
0.39 0.39
0.37
6500 K
DV 2T
0.37
6500 K 2T
3S
0.36 0.36
E1
2S 2S 3B
0.35 2C 2C
1T 0.35 1T
8000 K 8000 K 3A
2B 2B
CCy
CCy
0.34 1S 2D 0.34 1S 2D
1C 1C
2A 2A 3R
0.33 0T 0T
1B 0.33 1B
1D 2U 1D 2U
0S 0C 2R ANSI 0S 0C 2R ANSI
0.32 1A 0.32 1A
1U C78.377A 1U C78.377A
0B 0D 0B 0D
0.31 1R 0.31 1R
0A 0A
0U 0U
0.30 0.30
0R 0R
0.29 0.29
0.28 0.28
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCx CCx
0.40
5000 K
0.39
0.38 5700 K
0.37 E2 3S
6500 K 2T
0.36 3B
2S
0.35 2C
1T
8000 K 3A
2B
CCy
0.34 1S 2D
1C
2A 3R
0.33 0T
1B
1D 2U
0S 0C 2R ANSI
0.32 1A
1U C78.377A
0B
0.31 0D
1R
0A
0U
0.30
0R
0.29
0.28
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCx
28
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
0.45
0.44
2700 K
0.43 3000 K
0.42
E7
3500 K
7C
0.41 E6 7B
4000 K
6C
0.40
E5 6B 7D
4500 K 5C 7A
CCy
0.39 5000 K
6D
0.38
E4 5B
6A
ANSI
4C 5D C78.377A
0.37 E3 4B 5A
3C
4D
0.36 3B
4A
3D
0.35
3A
0.34
0.33
0.33
0.36
0.40
0.43
0.46
0.50
0.32
0.34
0.35
0.37
0.38
0.39
0.41
0.42
0.44
0.45
0.47
0.48
0.49
CCx
29
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
Bin codes and order codes for XHP70.3 LEDs are configured in the following manner:
30
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
In testing, Cree LED has found XLamp XHP70.3 LEDs to be compatible with JEDEC J‑STD‑020C, using the parameters listed below. As a
general guideline, Cree LED recommends that users follow the recommended soldering profile provided by the manufacturer of the solder
paste used, and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
tP
TP Critical Zone
TL to TP
Ramp-up
TL tL
Temperature
Tsmax
Tsmin
ts Ramp-down
Preheat
25
t 25˚C to Peak
Time
Note: All temperatures refer to the topside of the package, measured on the package body surface.
31
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
NOTES
Measurements
The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications
only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a
number of factors that are not within Cree LED’s control and are not intended or provided as operational specifications for the products.
Calculated values are provided for informational purposes only and are not intended or provided as specifications.
Lumen Maintenance
Cree LED now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen
maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree LED’s lumen maintenance testing and
forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive
current affect the LED junction temperature.
Moisture Sensitivity
Cree LED recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to
soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XHP70.3 LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life
in conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree LED recommends sealing any unsoldered
LEDs in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree LED representative or from the Product
Ecology section of the Cree LED website.
REACH Compliance
REACH substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency
(ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree LED
representative to insure you get the most up-to-date REACH SVHC Declaration. REACH banned substance information (REACH Article 67)
is also available upon request.
32
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
NOTES - CONTINUED
UL® Recognized Component
This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED
package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
33
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
4 3
7.00
OPTICAL MODEL ORIG
XLAMP ® XHP70.3 LED
ANODE SIDE
7.00
CATHODE SIDE
MECHANICAL DIMENSIONS
4 3 2 6.80 1
5.40
7.00
OPTICAL MODEL ORIGIN 4.00
0.56
ANODE SIDE
4 3
3.15
7.00
6.80
B
7.00
CATHODE SIDE
A CATHODE
SIDE
OPTICAL MODEL OR
R3.76
7.00
OPTICAL MODEL ORIGIN B4.49 CENTER PAD IS
ELECTRICALLY
SOLDERMASK MAY
BE PRESENT
ISOLATED
TOP VIEW SIDE VIEW
BOTTOM VIEW
Top View Side View Bottom View
6.80 4 3
ANODE SIDE
5.40
OPTICAL MODEL ORIGIN
4.00
TOP VIEW
XHP70.3 High Intensity
4 3 2 1
3.15
6.80
4.00
7.00
0.56 0.70
6.80
A CATHODE
SIDE
A
3.15
6.80
7.00
CENTER PAD IS
ELECTRICALLY
SOLDERMASK MAY B
BE PRESENT
ISOLATED
A 2610-700002 XHP70D
BOTTOM VIEW
4 3 2 1
ANODE SIDE 1.00
OPTICAL MODEL ORIGIN CENTER PAD IS SOLDERMASK MAY
ELECTRICALLY BE PRESENT
TOP VIEW SIDE VIEW ISOLATED
BOTTOM VIEW
Top View Side View
Bottom View
6.80
4.00
4 3
0.70
3.15
6.80
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC.
CLD-DS266
REV 6 34 A
XLAMP ® XHP70.3 LED
4 3 2
3.15
3.15
6.80
0.70 0.70
4.00
6.80
0.70
6.80
B B
6.80
6.80
6.80
6.80
3.15
3.15
3.15
6.80
6.80
6.80 6.80
3.15
RECOMMENDED
RECOMMENDED
Recommended 6VPCB
6‑V PCB6V PCB FOOTPRINT
FOOTPRINT
Footprint RECOMMENDED
RECOMMENDED 12V
12V PCB
Recommended PCB
PCBFOOTPRINT
FOOTPRINT
12‑V Footprint RECOMME
RECOMMENDED
PCB SOLDE
PCB SOLDER MA
(center pad is electrically isolated) (center pad is connected to anode and
6.70 6.70
6.80
cathode and is not electrically isolated)
0.83
24X
0.83
24X
0.24 0.24
0.11
0.41
0.11
0.41
4X
4X
0.70 0.70
RECOMMENDED 6V PCB FOOTPRINT RECOMMENDED 12V PCB FOOTPRINT
2 1
6.70
6.80
0.83
24X
0.24
0.11
0.41
4X
0.70 4.00
0.70
6.76
6.76
0.55
3.15 0.55
8X
8X
A A
0.50
0.50
B
6.80
6.80
6.76
0.80
0.55
0.80
0.31
0.31
8X
0.70 0.70
A 16X 16X 28X 28X
0.50
RECOMMENDED
RECOMMENDED STENCIL
STENCIL OPENING
OPENING 261
2610-70
4 4 3 30.70 0.80
2 2
0.31
28X
16X
CB FOOTPRINT RECOMMENDED 6V AND 12V RECOMMENDED STENCIL OPENING
PCB SOLDER MASK
Recommended 6‑VOPENING
& 12‑V Recommended Stencil Openings
PCB Solder Mask Opening 6 V & 12 V Configurations
(solid area is open) 4 (solid 3
area is open) 2
2610-700002 XHP70D
35
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
2 1
NEGATIVE B
ELECTRICAL CONFIGURATION
12 V
6V SOLDER PAD LINK
NEGATIVE B
NEGATIVE A POSITIVE A
NEGATIVE B POSITIVE B
POSITIVE A
6V
NEGATIVE A POSITIVE A
NEGATIVE B POSITIVE B
36
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
All Cree LED carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
All dimensions are ±.13 mm unless otherwise indicated.
Dim. 7.40 7.40 4.60 4.00 12.00 2.00 0.36 1.75 7.50 1.50 1.50 16.00 5°
Dim. 7.60 7.60 1.70 4.00 12.00 2.00 0.30 1.75 7.50 1.50 1.50 16.00 3°
37
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
Feed Direction
END START
Feed Direction
Cover Tape
Pocket Tape
13 mm
13”
38
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6
XLAMP ® XHP70.3 LED
PACKAGING
39
© 2021-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree CLD-DS266
LED logo are registered trademarks Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 6