Professional Documents
Culture Documents
PRELIMINARY
Cree® XLamp® XP-L LEDs
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, Cree, Inc.
XLamp® and SC5 Technology® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, 4600 Silicon Drive
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship Durham, NC 27703
or association. USA Tel: +1.919.313.5300
XLAMP ® XP-L LED
PRELIMINARY
CHARACTERISTICS
Reverse voltage V -5
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
2
XLAMP ® XP-L LED
PRELIMINARY
FLUX CHARACTERISTICS - XP-L HIGH DENSITY (TJ = 85 °C)
The following table provides order codes for XLamp XP-L High Density LEDs. For a complete description of the order code nomenclature,
please see the Bin and Order Code Formats section (page 27). For definitions of the chromaticity kits, please see the Cree’s Standard
Chromaticity Kits section (page 26).
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
• Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
3
XLAMP ® XP-L LED
PRELIMINARY
FLUX CHARACTERISTICS - XP-L HIGH DENSITY (TJ = 85 °C) - CONTINUED
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
• Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
4
XLAMP ® XP-L LED
PRELIMINARY
FLUX CHARACTERISTICS - XP-L HIGH DENSITY (TJ = 85 °C) - CONTINUED
Minimum Luminous
Chromaticity Order Codes
Flux (lm) @ 1050 mA
Flux Flux
Kit CCT Code (lm) @ (lm) @ 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
85 °C 25 °C*
XPLAWT-00-0000- XPLAWT-00-0000-
V3 420 468
000LV30E6 000HV30E6
XPLAWT-00-0000- XPLAWT-00-0000-
V2 400 446
000LV20E6 000HV20E6
E6 3500 K
XPLAWT-00-0000- XPLAWT-00-0000-
U6 380 424
000LU60E6 000HU60E6
XPLAWT-00-0000- XPLAWT-00-0000-
U5 360 401
000LU50E6 000HU50E6
XPLAWT-00-0000- XPLAWT-00-0000-
V2 400 446
000LV20Z6 000HV20Z6
XPLAWT-00-0000- XPLAWT-00-0000-
Z6 3500 K U6 380 424
000LU60Z6 000HU60Z6
XPLAWT-00-0000- XPLAWT-00-0000-
U5 360 401
000LU50Z6 000HU50Z6
XPLAWT-00-0000- XPLAWT-00-0000-
V2 400 446
000LV20F7 000HV20F7
XPLAWT-00-0000- XPLAWT-00-0000-
U6 380 424
000LU60F7 000HU60F7
F7 3250 K
XPLAWT-00-0000- XPLAWT-00-0000-
U5 360 401
000LU50F7 000HU50F7
XPLAWT-00-0000- XPLAWT-00-0000-
U4 340 379
000LU40F7 000HU40F7
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
• Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
5
XLAMP ® XP-L LED
PRELIMINARY
FLUX CHARACTERISTICS - XP-L HIGH DENSITY (TJ = 85 °C) - CONTINUED
Minimum Luminous
Chromaticity Order Codes
Flux (lm) @ 1050 mA
Flux Flux
Kit CCT Code (lm) @ (lm) @ 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
85 °C 25 °C*
XPLAWT-00-0000- XPLAWT-00-0000-
V2 400 446
000LV20E7 000HV20E7
XPLAWT-00-0000- XPLAWT-00-0000-
U6 380 424
000LU60E7 000HU60E7
XPLAWT-00-0000- XPLAWT-00-0000-
U5 360 401
000LU50E7 000HU50E7
XPLAWT-00-0000- XPLAWT-00-0000-
E7 3000 K U4 340 379
000LU40E7 000HU40E7
XPLAWT-00-0000- XPLAWT-00-0000-
U3 320 357
000PU30E7 000UU30E7
XPLAWT-00-0000- XPLAWT-00-0000-
U2 300 334
000PU20E7 000UU20E7
XPLAWT-00-0000- XPLAWT-00-0000-
T6 280 312
000PT60E7 000UT60E7
XPLAWT-00-0000- XPLAWT-00-0000-
U6 380 424
000LU60Z7 000HU60Z7
XPLAWT-00-0000- XPLAWT-00-0000-
U5 360 401
000LU50Z7 000HU50Z7
XPLAWT-00-0000- XPLAWT-00-0000-
U4 340 379
000LU40Z7 000HU40Z7
Z7 3000 K
XPLAWT-00-0000- XPLAWT-00-0000-
U3 320 357
000PU30Z7 000UU30Z7
XPLAWT-00-0000- XPLAWT-00-0000-
U2 300 334
000PU20Z7 000UU20Z7
XPLAWT-00-0000- XPLAWT-00-0000-
T6 280 312
000PT60Z7 000UT60Z7
XPLAWT-00-0000-
V2 400 446
000LV20F8
XPLAWT-00-0000- XPLAWT-00-0000-
U6 380 424
000LU60F8 000HU60F8
XPLAWT-00-0000- XPLAWT-00-0000-
U5 360 401
000LU50F8 000HU50F8
XPLAWT-00-0000- XPLAWT-00-0000-
U4 340 379
000LU40F8 000HU40F8
F8 2850 K
XPLAWT-00-0000- XPLAWT-00-0000-
U3 320 357
000PU30F8 000UU30F8
XPLAWT-00-0000- XPLAWT-00-0000-
U2 300 334
000PU20F8 000UU20F8
XPLAWT-00-0000- XPLAWT-00-0000-
T6 280 312
000PT60F8 000UT60F8
XPLAWT-00-0000- XPLAWT-00-0000-
T5 260 290
000PT50F8 000UT50F8
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
• Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
6
XLAMP ® XP-L LED
PRELIMINARY
FLUX CHARACTERISTICS - XP-L HIGH DENSITY (TJ = 85 °C) - CONTINUED
Minimum Luminous
Chromaticity Order Codes
Flux (lm) @ 1050 mA
Flux Flux
Kit CCT Code (lm) @ (lm) @ 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
85 °C 25 °C*
XPLAWT-00-0000-
V2 400 446
000LV20E8
XPLAWT-00-0000- XPLAWT-00-0000-
U6 380 424
000LU60E8 000HU60E8
XPLAWT-00-0000- XPLAWT-00-0000-
U5 360 401
000LU50E8 000HU50E8
XPLAWT-00-0000- XPLAWT-00-0000-
U4 340 379
000LU40E8 000HU40E8
E8 2700 K
XPLAWT-00-0000- XPLAWT-00-0000-
U3 320 357
000PU30E8 000UU30E8
XPLAWT-00-0000- XPLAWT-00-0000-
U2 300 334
000PU20E8 000UU20E8
XPLAWT-00-0000- XPLAWT-00-0000-
T6 280 312
000PT60E8 000UT60E8
XPLAWT-00-0000- XPLAWT-00-0000-
T5 260 290
000PT50E8 000UT50E8
XPLAWT-00-0000-
U6 380 424
000LU60Z8
XPLAWT-00-0000- XPLAWT-00-0000-
U5 360 401
000LU50Z8 000HU50Z8
XPLAWT-00-0000- XPLAWT-00-0000-
U4 340 379
000LU40Z8 000HU40Z8
Z8 2700 K U3 320 357
XPLAWT-00-0000- XPLAWT-00-0000-
U2 300 334
000PU20Z8 000UU20Z8
XPLAWT-00-0000- XPLAWT-00-0000-
T6 280 312
000PT60Z8 000UT60Z8
XPLAWT-00-0000- XPLAWT-00-0000-
T5 260 290
000PT50Z8 000UT50Z8
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
• Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
7
XLAMP ® XP-L LED
PRELIMINARY
FLUX CHARACTERISTICS - XP-L HIGH INTENSITY (TJ = 85 °C)
The following table provides order codes for XLamp XP-L High Intensity LEDs. For a complete description of the order code nomenclature,
please see the Bin and Order Code Formats section (page 27). For definitions of the chromaticity kits, please see the Cree’s Standard
Chromaticity Kits section (page 26).
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
• Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
8
XLAMP ® XP-L LED
PRELIMINARY
FLUX CHARACTERISTICS - XP-L HIGH INTENSITY (TJ = 85 °C) - CONTINUED
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
• Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
9
XLAMP ® XP-L LED
PRELIMINARY
FLUX CHARACTERISTICS - XP-L HIGH INTENSITY (TJ = 85 °C) - CONTINUED
Flux Flux
Kit CCT Code (lm) @ (lm) @ 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
85 °C 25 °C*
XPLAWT-H0-0000- XPLAWT-H0-0000-
U5 360 401
000LU50E6 000HU50E6
XPLAWT-H0-0000- XPLAWT-H0-0000-
E6 3500 K U4 340 379
000LU40E6 000HU40E6
XPLAWT-H0-0000- XPLAWT-H0-0000-
U3 320 357
000LU30E6 000HU30E6
XPLAWT-H0-0000- XPLAWT-H0-0000-
U4 340 379
000LU40F7 000HU40F7
XPLAWT-H0-0000- XPLAWT-H0-0000-
F7 3250 K U3 320 357
000LU30F7 000HU30F7
XPLAWT-H0-0000- XPLAWT-H0-0000-
U2 300 334
000LU20F7 000HU20F7
XPLAWT-H0-0000- XPLAWT-H0-0000-
U4 340 379
000LU40E7 000HU40E7
XPLAWT-H0-0000- XPLAWT-H0-0000-
U3 320 357
000LU30E7 000HU30E7
XPLAWT-H0-0000- XPLAWT-H0-0000-
U2 300 334
000LU20E7 000HU20E7
E7 3000 K
XPLAWT-H0-0000- XPLAWT-H0-0000-
T6 280 312
000PT60E7 000UT60E7
XPLAWT-H0-0000- XPLAWT-H0-0000-
T5 260 290
000PT50E7 000UT50E7
XPLAWT-H0-0000- XPLAWT-H0-0000-
T4 240 268
000PT40E7 000UT40E7
XPLAWT-H0-0000- XPLAWT-H0-0000-
U4 340 379
000LU40F8 000HU40F8
XPLAWT-H0-0000- XPLAWT-H0-0000-
U3 320 357
000LU30F8 000HU30F8
XPLAWT-H0-0000- XPLAWT-H0-0000-
U2 300 334
000LU20F8 000HU20F8
XPLAWT-H0-0000-
F8 2850 K T6 280 312
000PT60F8
XPLAWT-H0-0000- XPLAWT-H0-0000-
T5 260 290
000PT50F8 000UT50F8
XPLAWT-H0-0000- XPLAWT-H0-0000-
T4 240 268
000PT40F8 000UT40F8
XPLAWT-H0-0000-
T3 220 245
000PT30F8
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
• Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
10
XLAMP ® XP-L LED
PRELIMINARY
FLUX CHARACTERISTICS - XP-L HIGH INTENSITY (TJ = 85 °C) - CONTINUED
Flux Flux
Kit CCT Code (lm) @ (lm) @ 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
85 °C 25 °C*
XPLAWT-H0-0000-
U4 340 379
000LU40E8
XPLAWT-H0-0000- XPLAWT-H0-0000-
U3 320 357
000LU30E8 000HU30E8
XPLAWT-H0-0000- XPLAWT-H0-0000-
U2 300 334
000LU20E8 000HU20E8
XPLAWT-H0-0000-
E8 2700 K T6 280 312
000PT60E8
XPLAWT-H0-0000- XPLAWT-H0-0000-
T5 260 290
000PT50E8 000UT50E8
XPLAWT-H0-0000- XPLAWT-H0-0000-
T4 240 268
000PT40E8 000UT40E8
XPLAWT-H0-0000-
T3 220 245
000PT30E8
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
• Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
11
XLAMP ® XP-L LED
Relative Spectral Power
PRELIMINARY
RELATIVE SPECTRAL POWER DISTRIBUTION
100
80
Relative Radiant Power (%)
20
0
380 430 480 530 580 630 680 730 780
Wavelength (nm)
120
100
Relative Luminous Flux (%)
80
60
40
20
0
25 50 75 100 125 150
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
12
XLAMP ® XP-L LED
PRELIMINARY
Electrical Characteristics (Tj = 85°C) after Vf change
ELECTRICAL CHARACTERISTICS (TJ = 85 °C)
3000
2500
Forward Current (mA)
2000
1500
1000
500
Relative Intensity
2.5
vs. 2.6Current
2.7
(TjForward
=2.885°C) 2.9
Voltage (V)
3.0 3.1 3.2
250
200
Relative Luminous Flux (%)
150
100
50
0
0 500 1000 1500 2000 2500 3000
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
13
XLAMP ® XP-L LED
0.020
0.016
XP-L High Density
0.012
0.008
0.004
ΔCCx
0.000
ΔCCy
-0.004
-0.008
-0.012
-0.016
-0.020
0 500 1000 1500 2000 2500 3000
Relative Chromaticity Vs. Current, HI, ww
Current (mA)
0.020
0.016
XP-L High Intensity
0.012
0.008
0.004
ΔCCx
0.000
ΔCCy
-0.004
-0.008
-0.012
-0.016
-0.020
0 500 1000 1500 2000 2500 3000
Current (mA)
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
14
XLAMP ® XP-L LED
0.020
0.016
XP-L High Density
0.012
0.008
0.004
ΔCCx
0.000
ΔCCy
-0.004
-0.008
-0.012
-0.016
-0.020
Relative Chromaticity
25 Vs. Temperature,
50 HI, ww 75 100 125 150
Tsp (°C)
0.020
0.016
XP-L High Intensity
0.012
0.008
0.004
ΔCCx
0.000
ΔCCy
-0.004
-0.008
-0.012
-0.016
-0.020
25 50 75 100 125 150
Tsp (°C)
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
15
XLAMP ® XP-L LED
PRELIMINARY
Typical Spatial Radiation Pattern
TYPICAL SPATIAL DISTRIBUTION
100
Relative Luminous Intensity (%)
80
60
XP-L High Density
XP-L High Intensity
40
20
0
-90 -70 -50 -30 -10 10 30 50 70 90
Angle (º)
THERMAL DESIGN
Thermal Design
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
Cool White after temp coeff change
and optical characteristics.
3500
3000
Maximum Current (mA)
2500
2000
1500
Rj-a = 4°C/W
1000
Rj-a = 7°C/W
500 Rj-a = 10°C/W
Rj-a = 15°C/W
0
0 20 40 60 80 100 120 140 160
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
16
XLAMP ® XP-L LED
PRELIMINARY
PERFORMANCE GROUPS – LUMINOUS FLUX
XLamp XP-L LEDs are tested for luminous flux and placed into one of the following luminous‑flux groups:
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
17
XLAMP ® XP-L LED
PRELIMINARY
PERFORMANCE GROUPS – CHROMATICITY
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
18
XLAMP ® XP-L LED
PRELIMINARY
PERFORMANCE GROUPS – CHROMATICITY (CONTINUED)
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
19
XLAMP ® XP-L LED
PRELIMINARY
PERFORMANCE GROUPS – CHROMATICITY (CONTINUED)
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
20
XLAMP ® XP-L LED
PRELIMINARY
CREE’S STANDARD CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE
0.40
5000 K
0.39
0.38 5700 K
3S
0.37
6500 K 2T
0.36 3B
2S
2C
0.35 1T
8000 K 3A
2B
CCy
0.34 1S 2D
1C
2A 3R
0.33 0T 1B
1D 2U
0S 0C 2R ANSI
0.32 1A
1U C78.377A
0B 0D
0.31 1R
0A
0U
0.30
0R
0.29
0.28
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCx
Neutral White
0.44
0.43 3500 K
6T
0.42
4000 K
6S
0.41 4500 K 5T 6C3
6C2
6B3
0.40 5S 6C4
5C3 6B2
6C1
5000 K 5C2 6B4
4T 6D3
0.39 5B3 5C4 6B1
6D2
4S 5B2 5C1 6A3
6D4
5B4 6A2
CCy
5D3 6D1
0.38 3T
4C 5B1 5D2 6A4
5A3 5D4 6A1
3S 6U
0.37 4B 5A2 5D1
3C 5A4
5A1 6R
4D 5U
0.36 3B
4A
5R
3D
0.35 4U
3A
4R ANSI
0.34 3U C78.377A
3R
0.33
0.32
0.44
0.42
0.43
0.39
0.40
0.41
0.37
0.38
0.35
0.36
0.33
0.34
CCx
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
21
XLAMP ® XP-L LED
PRELIMINARY
CREE’S STANDARD CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE - CONTINUED
0.45
2700 K
3000 K
0.44
0.43 3500 K
8C3
8C2
8B3
8B2
0.42 7C3
4000 K 7C2 8C4
7B3 8C1
7B2 8B4
8B1
0.41 4500 K 6C3
7C1
7C4
6C2 7B4 8D3
8D2
7B1 8A3
6B3 8A2
6C4 7D3
0.40 5C3 6B2 7D2
8D4
CCy
3C
5A4 ANSI
5A1
4D C78.377A
0.36 3B
4A
3D
0.35
3A
0.34
0.33
0.47
0.49
0.43
0.45
0.48
0.34
0.36
0.38
0.40
0.42
0.44
0.46
0.33
0.35
0.37
0.39
0.41
CCx
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
22
XLAMP ® XP-L LED
PRELIMINARY
CREE’S STANDARD COOL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
0.40 0.40
5000 K 5000 K
0.39 0.39
53
3S 3S
0.37
6500 K 51 2T
0.37
6500 K 2T
0.36 3B 0.36 3B
2S 2S
0.35 2C 2C
1T 0.35 1T
8000 K 3A 8000 K 3A
2B 2B
0.34
CCy
CCy
1S
1C 2D 0.34 1S 2D
1C
2A 3R 2A 3R
0.33 0T 0.33 0T
1B 1B
1D 2U 1D 2U
0S 0C ANSI 0S 0C ANSI
0.32 1A
2R 0.32 1A
2R
1U C78.377A 1U C78.377A
0B 0B
0D 0D
0.31 1R 0.31 1R
0A 0A
0U 0U
0.30 0.30
0R 0R
0.29 0.29
0.28 0.28
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCx CCx
0.40
0.40
5000 K
5000 K
0.39
0.39
0.38 5700 K
0.38 5700 K
3S
50
0.37 3S
0.37
6500 K 2T 6500 K 2T
0.36 3B 0.36
E1
2S 3B
2S
0.35 2C
1T 0.35 2C
1T
8000 K 3A
2B 8000 K 3A
2B
CCy
0.34 1S 2D
1C 0.34 1S 2D
1C
CCy
2A 3R
0T 2A 3R
0.33 1B 0.33 0T
1D 2U 1B
1D 2U
0S 0C 2R ANSI
0.32 1A 0.32
0S 0C 2R ANSI
1A
1U C78.377A C78.377A
0B 1U
0D 0B
0.31 0D
1R 0.31 1R
0A
0U 0A
0.30 0.30
0U
0R
0R
0.29 0.29
0.28 0.28
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCx CCx
0.40
5000 K
0.39
0.38 5700 K
0.37 E2 3S
6500 K 2T
0.36 3B
2S
0.35 2C
1T
8000 K 3A
2B
CCy
0.34 1S 2D
1C
2A 3R
0.33 0T
1B
1D 2U
0S 0C 2R ANSI
0.32 1A
1U C78.377A
0B
0.31 0D
1R
0A
0U
0.30
0R
0.29
0.28
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCx
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
23
XLAMP ® XP-L LED
PRELIMINARY
CREE’S STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
0.46
0.45
2700 K
3000 K
0.44
E8
E7
0.43
3500 K
8C3
8C2
8B3
8B2
0.42 7C3
4000 K 7C2
E6
7B3 8C4
8C1
7B2 8B4
8B1
0.41 4500 K 6C3
7C1
7C4
6C2 7B4 8D3
8D2
8A3
E5
6B3 7B1 8A2
6C4 7D3
0.40 6B2 7D2 8D4
5C3 6C1 7A3
7A2 8A4 8D1
5000 K 5C2 6B4 8A1
6D3 7D4
CCy
E4
6D2 7A4
5B2 5C1 6A3 7A1
6D4
5B4 5D3 6A2
0.38 6D1
5B1 5D2 6A4
E3
4C
5A3 5D4 6A1
0.37 4B 5A2 5D1
3C 5A4 ANSI
4D 5A1 C78.377A
0.36 3B
4A
3D
0.35
3A
0.34
0.33
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCx
0.46
0.45
2700 K
3000 K
0.44
0.43 3500 K
F8
F7
8C3
8C2
8B3
8B2
0.42 7C3
4000 K 7C2 8C4
7B3 8C1
F6
7B2 8B4
8B1
0.41 4500 K 6C3
7C1
7C4
6C2 7B4 8D3
8D2
7B1 8A3
6B3 8A2
6C4 7D3
0.40
F5
6B2 7D2 8D4
5C3 6C1 7A3
7A2 8A4 8D1
5000 K 5C2 6B4 8A1
CCy
6D3 7D4
0.39 5B3 5C4 6B1
6D2 7A4
7D1
7A1
F4
5B2 5C1 6A3
6D4
5B4 5D3 6A2
0.38 5B1 5D2
6D1
4C 6A4
5A3 5D4 6A1
0.37 4B 5A2 5D1
3C 5A4 ANSI
4D 5A1 C78.377A
0.36 3B
4A
3D
0.35
3A
0.34
0.33
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCx
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
24
XLAMP ® XP-L LED
PRELIMINARY
CREE’S STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS -
CONTINUED
0.46
0.45
2700 K
3000 K
0.44
Z8
0.43 3500 K
Z7 8C2
8C3
Z6
8B3
8B2
0.42 7C3
4000 K 7C2 8C4
7B3 8C1
7B2 8B4
8B1
Z5
0.41 4500 K 6C3
7C1
7C4
6C2 7B4 8D3
8D2
7B1 8A3
6B3 8A2
6C4 7D3
0.40 5C3 6B2 7D2 8D4
6C1 7A3
7A2 8A4 8D1
5000 K 5C2 6B4 8A1
6D3 7D4
CCy
0.34
0.33
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCx
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
25
XLAMP ® XP-L LED
PRELIMINARY
CREE’S STANDARD CHROMATICITY KITS
The following table provides the chromaticity bins associated with chromaticity kits.
6200 K 51 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S
6000 K 53 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S
Cool 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D
6200 K 50
White
6500 K E1 1A, 1B, 1C, 1D
3750 K F6 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4
3500 K E6 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4
3250 K F7 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4
3000 K E7 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4
Warm
White 7A3, 7B4, 7C1, 7D2
3000 K Z7
2850 K F8 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4
2700 K E8 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
26
XLAMP ® XP-L LED
PRELIMINARY
BIN AND ORDER CODE FORMATS
XP-L bin codes and order codes are configured in the following manner:
Series Series
XPL = XP-L XPL = XP-L
Class Class
0 = High density 0 = High density
H = High intensity H = High intensity
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
27
XLAMP ® XP-L LED
PRELIMINARY
REFLOW SOLDERING CHARACTERISTICS
In testing, Cree has found XLamp XP-L LEDs to be compatible with JEDEC J‑STD‑020C, using the parameters listed below. As a general
guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used,
and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
tP
TP Critical Zone
TL to TP
Ramp-up
TL tS
Temperature
Tsmax
Tsmin
ts Ramp-down
Preheat
25
t 25˚C to Peak
Time IPC/JEDEC J-STD-020C
Note: All temperatures refer to the topside of the package, measured on the package body surface.
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
28
XLAMP ® XP-L LED
PRELIMINARY
NOTES
Measurements
The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only
and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number
of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated
values are provided for informational purposes only and are not intended or provided as specifications.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
Moisture Sensitivity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XP-L LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in
conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs
in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Ecology section of the Cree website.
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative
to insure you get the most up-to-date REACh Declaration. REACh banned substance information (REACh Article 67) is also available upon
request.
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
29
XLAMP ® XP-L LED
PRELIMINARY
NOTES - CONTINUED
UL® Recognized Component
This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED
package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
30
XLAMP ® XP-L LED
PRELIMINARY
MECHANICAL DIMENSIONS
Alternate bottom views of the XP-L High Density LED are shown in the diagrams below.
Anode
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
31
XLAMP ® XP-L LED
6 6 5 5 5 4 4 4 3 3 3 2 2
TICE NOTICE NOTICE REVISONS
TIAL. THIS PLOT
E CONFIDENTIAL. AND THE INFORMATION
THIS PLOT ANDPLOT
THE INFORMATION
PRELIMINARY
CREE CONFIDENTIAL. THIS AND THE INFORMATION REV REVDESCRIPTION
REV DES
HIN ARE
TAINED THE PROPRIETARY
WITHIN
CONTAINED ARE AND
THE PROPRIETARY
WITHIN ARE AND
THE PROPRIETARY AND
NFORMATION
FIDENTIAL OF CREE,
INFORMATION
CONFIDENTIAL INC.
OFTHIS PLOT
CREE,
INFORMATION INC. THIS INC.
OF CREE, PLOT THIS PLOT
PIED,
Y NOTREPRODUCED
BE COPIED,
MAY NOT BE OR DISCLOSED
REPRODUCED
COPIED, ORTO ANYOR DISCLOSED
DISCLOSED
REPRODUCED TO ANY TO ANY
PERSON
THEWITHOUT
UTHORIZED WRITTEN
PERSON
UNAUTHORIZED CONSENT
THE WITHOUT
WRITTEN
PERSON CONSENTCONSENT
THEWITHOUT
WRITTEN
CREE INC.
OF MECHANICAL
CREE INC. DIMENSIONS - CONTINUED
Anode
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
32
A
XLAMP ® XP-L LED
PRELIMINARY
B
TAPE AND REEL
All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
6
NOTICE
5 4 A 3
CREE
CREE CONFIDENTIAL.
CONFIDENTIAL.
NOTICE
NOTICE
THIS
THIS PLOT
PLOT AND
AND THE
THE INFORMATION
INFORMATION
POCKET SIZE
XPLAWT-00-xxxx-xxxxxxxxx SECTION A-A
CONTAINED
CONTAINED WITHIN
WITHIN ARE
ARE THE
THE PROPRIETARY
PROPRIETARY AND
AND 6 5 4 3
Ao - 23.60
: 1 mm [.142"]
CONFIDENTIAL
CONFIDENTIAL INFORMATION
INFORMATION OF
OF CREE,
CREE, INC.
INC. THIS
THIS PLOT
PLOT
NOTICE
MAY
MAY NOT
2.00 [.079]
NOTBEBE COPIED,
COPIED, REPRODUCED
REPRODUCED OR
OR DISCLOSED
DISCLOSED TO
TO ANY
ANY
D UNAUTHORIZED
Ø1.50 SCALE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
UNAUTHORIZED PERSONWITHOUT
PERSON WITHOUT THE THE WRITTEN
WRITTEN CONSENT
CONSENT CONTAINED WITHIN ARE THE PROPRIETARY AND
P2
High Density
OF
OF CREE
CREE INC.
INC.
POCKET SIZE
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT
OF CREE INC.
THE WRITTEN CONSENT
+.10
-.00 Bo - POCKET
3.60 mmSIZE[.142"]
4.00 [.157] POCKET SIZE
2.00 [.079]
2.00 [.079] Ø1.50 1.75 [.069] Ao--
Ao 3.60mm
3.60 mm[.142"]
[.142"]
Ø1.50
Ko - 3.00 mm [.118"]
DD
Po DETAILE1B
P2
P2 D 2.00 [.079] +.10
+.10 Ø1.50 Ao - 3.60 mm [.142"]
CATHODEP2 SIDE SCALE
-.00
-.00 2 :1 +.10 Bo--
Bo 3.60mm
3.60 mm[.142"]
[.142"]
4.00 [.157]
4.00 [.157] -.00 Bo - 3.60 mm [.142"]
4.00 [.157] 1.75 [.069]
1.75 [.069]
Po
Po Po
E1
E1
1.75 [.069] Ko--
Ko 3.0
3.00
3.00
°
mm
mmKo3.60[.118"]
-[.118"]
[.142]
3.00 mm [.118"]
CATHODESIDE
CATHODE SIDE CATHODE SIDE
E1 Bo
12.00 [.472]
5.50 [.217]F NOMINAL C
3.60 [.142]
3.60 [.142] 3.60 [.142]
10.25 3.0 °°
3.0 3.0 ° Bo
C 12.30 [.484] Bo
Bo
[.404] 12.00
12.00 [.472]
[.472] 12.00 [.472]
Ø1.50 5.50 MAX
[.217]F
5.50
5.50 [.217]F
[.217]F E2 NOMINAL
NOMINAL
NOMINAL C
[.059] W CC
10.25
C
D1 10.25
10.25 12.30 [.484]
CC 12.30[.484]
12.30 [.484] [.404]
MIN MAX
[.404]
[.404] Ø1.50 E2
Ø1.50
Ø1.50 MAX
MAX
[.059] W
E2
E2
[.059]
[.059] D1 WW
ANODE SIDE
D1
D1 MIN
MIN
MIN .30 [.012]
8.00 [.315] ANODE SIDE
P T
ANODESIDE
ANODE SIDE 8.00 [.315] .30 [.012]
4.0±.1 P 1.5±.1 T
.30 [.012]
.30 [.012]
8.00 [.315]
8.00 [.315] 3.00 [.118]
8.0±.1 TT
Anode Side B
B
PP 1.75±.10 Ko 2.5±.1
3.00 [.118] B
Cathode
Ko Side
B
Ko
Ko 3.0 °
BB
+.3
12.0
.0
3.0 °°
3.0
3.60 [.142]
3.60 [.142] User Feed Direction
MILLIMETERS AND AFTER FINISH. CHECK MILLIMETERS
DATE AND AFTER FINISH. CHECK DATE
Durham, N.C 27703 Durham, N.C 27703
Phone (919) 313-5300
Ao END START
Phone (919) 313-5300
TOLERANCE UNLESS SPECIFIED: TOLERANCE UNLESS SPECIFIED:
ENDAo
Fax (919) 313-5558
.XX ± .25 Fax (919) 313-5558
A
.XX ± .25
START
APPROVED DATE
APPROVED DATE
.XXX ± .125 TITLE A
.XXX ± .125 X° ± .5 °
TITLE
X° THIRD
± .5 ° PROJECTION
ANGLE Carrier Tape, XPL
THIRD ANGLE PROJECTION
FOR SHEET METAL PARTS ONLY MATERIAL
DRAWN
DRAWN BYBY
FOR SHEET METAL PARTS ONLY
.X
DATE
DATE ± 1.5
Carrier Tape, XPL
MATERIAL
UNLESS
UNLESS OTHERWISE
OTHERWISE SPECIFIED
SPECIFIED .XX ± .75 SIZE DRAWING NO. REV.
.X ± ARE IN1.5
AA D.D.
C
CRONIN 5/16/14 4600 Silicon Drive
CRONIN 5/16/14
2402-00040
4600 Silicon Drive
DIMENSIONS
DIMENSIONS ARE IN
.XX ± .75 .XXX ± SIZE
.25 DRAWING NO. Durham, N.C 27703 REV.
A
C
FINAL PROTECTIVE FINISH Durham, N.C 27703
MILLIMETERS
MILLIMETERS ANDAND AFTER
.XXX AFTER
FINISH.
± FINISH.
X° ± .5 °
2402-00040
CHECK
CHECK DATE
DATE
(919) 313-5558 A
.25 FINAL PROTECTIVE FINISH Phone
Phone (919)
(919) 313-5300
313-5300
TOLERANCE
TOLERANCE X°UNLESS
UNLESS SPECIFIED:
± SPECIFIED:
.5 ° SURFACE FINISH: 1.6 SCALE
Fax 1.000
Fax (919) 313-5558
SHEET OF
1 /1
.XX
.XX ± ± .25
.25 A
1 /1 A
APPROVED
APPROVED DATE
DATE SCALE
6 5 4 SURFACE FINISH:
.XXX
.XXX
1.6
± ± .125.125 3 TITLE
TITLE 1.000 2 SHEET OF
1
X°X° ± ± .5 .5° °
6 5 4 3 2 CarrierTape,
Carrier Tape,XPL
XPL
1
Loaded Pockets
THIRD
THIRD ANGLE
ANGLE PROJECTION
PROJECTION MATERIAL
FOR
FOR SHEET
SHEET METAL
METAL PARTS
PARTS ONLY
ONLY MATERIAL
CC
SIZE
Cover Tape
Pocket Tape
13mm
7"
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
33
B XLAMP ® XP-L LED
PRELIMINARY
A
TAPE AND REEL - CONTINUED
POCKET SIZE
XP-L High Intensity
SECTION A-AmmSIZE
POCKET
Ao - POCKET
3.70 SIZE
[.146"]
XPLAWT-H0-xxxx-xxxxxxxxx SCALE 2 : 1
Ao
Bo --
Ao 3.70 mm
3.70 mm [.146"]
[.146"]
High Intensity
2.00 [.079]
+.10 +.0039 Bo
Ko--
Bo 3.70 mm [.146"]
1.20mm
3.70 [.146"]
[.047"] POCKET SIZE
P2 Ø 1.50 -.00[.0591-.0000]Do
DETAIL B
2.00 [.079]
2.00 [.079]
+.10 +.0039 Ko --
Ko 1.20 mm
1.20 mm [.047"]
[.047"]
Ao - 3.70 mm [.146"]
4.00 [.157] P2
P2 ØØSCALE
1.50+.102+.0039
1.50 : 1 -.00[.0591-.0000]Do
-.00[.0591-.0000]Do
1.75 [.069]
Po
4.00 [.157]
4.00 [.157] CATHODE SIDE
E1 Bo - 3.70 mm [.146"]
Po
Po 1.75 [.069]
1.75 [.069]
CATHODESIDE
CATHODE SIDE
2.00 [.079] E1
E1 +.10 +.0039 Ko - 1.20 mm [.047"]
P2 Ø 1.50 -.00[.0591-.0000]Do
4.00 [.157] 3.0°
Po 1.75 [.069]
12.00 [.472]
5.50 [.217]F NOMINAL E1 3.0°
3.0°
CATHODE SIDE
12.00 [.472]
12.00 [.472]
5.50 [.217]F
5.50 [.217]F 10.25 3.70 [.146]
12.30 [.484]
NOMINAL
NOMINAL
[.404] Bo
Ø 1.50 MAX
E2
10.25
10.25 3.70 [.146]
[.146]
[.059] 12.30W
12.30 [.484]
[.484] 3.70 3.0°
[.404]
[.404] Bo
MAX
MAX 12.00 [.472] Bo
ØØD1 1.50
1.50 E2
E2
MIN
[.059] 5.50 [.217]F
WW NOMINAL
[.059]
D1D1 10.25
ANODE SIDE MIN
MIN 12.30 [.484] 3.70 [.146]
[.404] Bo
Ø 1.50 MAX
E2
ANODE
ANODE SIDE
SIDE [.059] W .30 [.012]
8.00 [.315]
P D1 T
MIN 1.5±.1
[.315] 4.0±.1
8.00 [.315]
8.00 .30 [.012]
.30 [.012]
PP TT Anode Side
1.75±.10 ANODE SIDE 8.0±.1 2.5±.1
1.20 [.047]
Cathode Side
Ko .30 [.012]
8.00 [.315]
1.20 [.047]
1.20 [.047] T
P
3.0° Ko
Ko
+.3
12.0
.0 3.0°
3.0°
1.20 [.047]
3.70 [.146] Ko
Ao
Anode Side
3.0°
3.70 [.146]
3.70 [.146]
(denoted by + and circle)
Ao
Ao
User Feed Direction
END 3.70 [.146] START
Ao
Loaded Pockets
Trailer Leader
(1,000 Lamps)
160mm (min) of 400mm (min) of
empty pockets empty pockets with
sealed with tape at least 100mm
(20 pockets min.) sealed by tape
(50 empty pockets min.)
Cover Tape
Pocket Tape
13mm
7"
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
34
XLAMP ® XP-L LED
PRELIMINARY
PACKAGING
Unpackaged Reel
Vacuum-Sealed
Vacuum-Sealed
Moisture Barrier Bag
Moisture Barrier Bag
Label
CREE Binwith
Code Cree Bin
Code,
& Qty,
Barcode LabelLot #
Label with Cree Bin Code,
Label with
Label with Cree Bin
Customer
Quantity, Reel ID Code,
P/N, Qty,Qty,
Lot #, Lot
PO # #
Packaged Reel
Patent Label
Boxed Reel
Copyright © 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or
vendor endorsement, sponsorship or association.
35