Professional Documents
Culture Documents
Cree LED / 4400 Silicon Drive / Durham, NC 27703 USA / +1.919.313.5330 / www.cree-led.com
1
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
CHARACTERISTICS
Reverse voltage V 1
* Thermal resistance measurement was performed per the JEDEC JESD51-14 standard.
2
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
ORDER CODES SUGGESTED FOR NEW DESIGNS - XP-L HIGH DENSITY (TJ = 85 °C)
The following tables provide order codes for XLamp XP-L High Density LEDs. For a complete description of the order code nomenclature,
please see the Bin and Order Code Formats section (page 24). For definitions of the chromaticity kits, please see the Standard
Chromaticity Kits section (page 23).
Notes
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 26).
• XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
3
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
ORDER CODES SUGGESTED FOR NEW DESIGNS - XP-L HIGH DENSITY (TJ = 85 °C) - CONTINUED
Notes
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 26).
• XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
4
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
ORDER CODES SUGGESTED FOR NEW DESIGNS - XP-L HIGH DENSITY (TJ = 85 °C) - CONTINUED
Notes
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 26).
• XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
5
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
ORDER CODES SUGGESTED FOR NEW DESIGNS - XP-L HIGH DENSITY (TJ = 85 °C) - CONTINUED
Notes
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 26).
• XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
6
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
ORDER CODES SUGGESTED FOR NEW DESIGNS - XP-L HIGH DENSITY (TJ = 85 °C) - CONTINUED
Notes
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 26).
• XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
7
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
ORDER CODES SUGGESTED FOR NEW DESIGNS - XP-L HIGH INTENSITY (TJ = 85 °C)
The following tables provide order codes for XLamp XP-L High Intensity LEDs. For a complete description of the order code nomenclature,
please see the Bin and Order Code Formats section (page 24). For definitions of the chromaticity kits, please see the Standard
Chromaticity Kits section (page 23).
Notes
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 26).
• XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
8
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
ORDER CODES SUGGESTED FOR NEW DESIGNS - XP-L HIGH INTENSITY (TJ = 85 °C) - CONTINUED
Notes
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 26).
• XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
9
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
ORDER CODES SUGGESTED FOR NEW DESIGNS - XP-L HIGH INTENSITY (TJ = 85 °C) - CONTINUED
Notes
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 26).
• XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
10
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
100%
80%
Relative Radiant Power
60%
5000 K - 8300 K CCT
20%
0%
380 430 480 530 580 630 680 730 780
Wavelength (nm)
120%
110%
100%
90%
Relative Luminous Flux
80%
70%
60%
50%
40%
30%
20%
10%
0%
25 50 75 100 125 150
11
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
3000
2500
Forward Current (mA)
2000
1500
1000
500
250%
200%
Relative Luminous Flux
150%
100%
50%
0%
0 500 1000 1500 2000 2500 3000
12
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
0.020
0.016
XP-L High Density
0.012
0.008
0.004
ΔCCx
0.000
ΔCCy
-0.004
-0.008
-0.012
-0.016
-0.020
0 500 1000 1500 2000 2500 3000
0.020
0.016
XP-L High Intensity
0.012
0.008
0.004
ΔCCx
0.000
ΔCCy
-0.004
-0.008
-0.012
-0.016
-0.020
0 500 1000 1500 2000 2500 3000
Current (mA)
13
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
0.020
0.016
XP-L High Density
0.012
0.008
0.004
ΔCCx
0.000
ΔCCy
-0.004
-0.008
-0.012
-0.016
Relative Chromaticity
-0.020 Vs. Temperature, HI, ww
25 50 75 100 125 150
Tsp (°C)
0.020
0.016
XP-L High Intensity
0.012
0.008
0.004
ΔCCx
0.000
ΔCCy
-0.004
-0.008
-0.012
-0.016
-0.020
25 50 75 100 125 150
Tsp (°C)
14
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
Typical
TYPICAL SPATIALSpatial Radiation
DISTRIBUTION Pattern
100%
80%
Relative Luminous Intensity
60%
XP-L High Density
XP-L High Intensity
40%
20%
0%
-90 -70 -50 -30 -10 10 30 50 70 90
Angle (º)
THERMAL DESIGN
Thermal Design
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
Coolproduct
White to be designed in a manner that minimizes thecoeff
after temp thermal resistance from the solder point to ambient in order to optimize lamp life
change
and optical characteristics.
3500
3000
Maximum Current (mA)
2500
2000
1500
Rj-a = 4°C/W
1000
Rj-a = 7°C/W
500 Rj-a = 10°C/W
Rj-a = 15°C/W
0
0 20 40 60 80 100 120 140 160
15
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
XLamp XP-L LEDs are tested for luminous flux and placed into one of the following luminous‑flux groups:
T3 220 240
T4 240 260
T5 260 280
T6 280 300
U2 300 320
U3 320 340
U4 340 360
U5 360 380
U6 380 400
V2 400 420
V3 420 440
V4 440 460
V5 460 480
V6 480 500
W2 500 520
W3 520 540
16
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
17
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
18
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
19
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
0.40 0.40
5000 K 5000 K
0.39 0.39
53
3S 3S
0.37
6500 K 51 2T
0.37
6500 K 2T
0.36 3B 0.36 3B
2S 2S
0.35 2C 2C
1T 0.35 1T
8000 K 3A 8000 K 3A
2B 2B
0.34
CCy
CCy
1S
1C 2D 0.34 1S 2D
1C
2A 3R 2A 3R
0.33 0T 0.33 0T
1B 1B
1D 2U 1D 2U
0S 0C ANSI 0S 0C ANSI
0.32 1A
2R 0.32 1A
2R
1U C78.377A 1U C78.377A
0B 0B
0D 0D
0.31 1R 0.31 1R
0A 0A
0U 0U
0.30 0.30
0R 0R
0.29 0.29
0.28 0.28
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCx CCx
0.40
0.40
5000 K
5000 K
0.39
0.39
0.38 5700 K
0.38 5700 K
3S
50
0.37 3S
0.37
6500 K 2T 6500 K 2T
0.36 3B 0.36
E1
2S 3B
2S
0.35 2C
1T 0.35 2C
1T
8000 K 3A
2B 8000 K 3A
2B
CCy
0.34 1S 2D
1C 0.34 1S 2D
1C
CCy
2A 3R
0T 2A 3R
0.33 1B 0.33 0T
1D 2U 1B
1D 2U
0S 0C 2R ANSI
0.32 1A 0.32
0S 0C 2R ANSI
1A
1U C78.377A C78.377A
0B 1U
0D 0B
0.31 0D
1R 0.31 1R
0A
0U 0A
0.30 0.30
0U
0R
0R
0.29 0.29
0.28 0.28
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCx CCx
0.40
5000 K
0.39
0.38 5700 K
0.37 E2 3S
6500 K 2T
0.36 3B
2S
0.35 2C
1T
8000 K 3A
2B
CCy
0.34 1S 2D
1C
2A 3R
0.33 0T
1B
1D 2U
0S 0C 2R ANSI
0.32 1A
1U C78.377A
0B
0.31 0D
1R
0A
0U
0.30
0R
0.29
0.28
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCx
20
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
0.46
0.45
2700 K
3000 K
0.44
E8
E7
0.43
3500 K
8C3
8C2
8B3
8B2
0.42 7C3
4000 K 7C2
E6
7B3 8C4
8C1
7B2 8B4
8B1
0.41 4500 K 6C3
7C1
7C4
6C2 7B4 8D3
8D2
8A3
E5
6B3 7B1 8A2
6C4 7D3
0.40 6B2 7D2 8D4
5C3 6C1 7A3
7A2 8A4 8D1
5000 K 5C2 6B4 8A1
6D3 7D4
CCy
E4
6D2 7A4
5B2 5C1 6A3 7A1
6D4
5B4 5D3 6A2
0.38 6D1
5B1 5D2 6A4
E3
4C
5A3 5D4 6A1
0.37 4B 5A2 5D1
3C 5A4 ANSI
4D 5A1 C78.377A
0.36 3B
4A
3D
0.35
3A
0.34
0.33
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCx
0.46
0.45
2700 K
3000 K
0.44
0.43 3500 K
F8
F7
8C3
8C2
8B3
8B2
0.42 7C3
4000 K 7C2 8C4
7B3 8C1
F6
7B2 8B4
8B1
0.41 4500 K 6C3
7C1
7C4
6C2 7B4 8D3
8D2
7B1 8A3
6B3 8A2
6C4 7D3
0.40
F5
6B2 7D2 8D4
5C3 6C1 7A3
7A2 8A4 8D1
5000 K 5C2 6B4 8A1
CCy
6D3 7D4
0.39 5B3 5C4 6B1
6D2 7A4
7D1
7A1
F4
5B2 5C1 6A3
6D4
5B4 5D3 6A2
0.38 5B1 5D2
6D1
4C 6A4
5A3 5D4 6A1
0.37 4B 5A2 5D1
3C 5A4 ANSI
4D 5A1 C78.377A
0.36 3B
4A
3D
0.35
3A
0.34
0.33
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCx
21
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS -
CONTINUED
0.46
0.45
2700 K
3000 K
0.44
Z8
0.43 3500 K
Z7 8C2
8C3
Z6
8B3
8B2
0.42 7C3
4000 K 7C2 8C4
7B3 8C1
7B2 8B4
8B1
Z5
0.41 4500 K 6C3
7C1
7C4
6C2 7B4 8D3
8D2
7B1 8A3
6B3 8A2
6C4 7D3
0.40 5C3 6B2 7D2 8D4
6C1 7A3
7A2 8A4 8D1
5000 K 5C2 6B4 8A1
6D3 7D4
CCy
0.34
0.33
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCx
22
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
The following table provides the chromaticity bins associated with chromaticity kits.
6200 K 51 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S
6000 K 53 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S
Cool
6200 K 50 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D
White
6500 K E1 1A, 1B, 1C, 1D
3750 K F6 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4
3500 K E6 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4
3250 K F7 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4
3000 K E7 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4
Warm
White
3000 K Z7 7A3, 7B4, 7C1, 7D2
2850 K F8 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4
2700 K E8 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4
23
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
XP-L bin codes and order codes are configured in the following manner:
Series Series
XPL = XP-L XPL = XP-L
Class Class
0 = High density 0 = High density
H = High intensity H = High intensity
24
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
In testing, Cree LED has found XLamp XP-L LEDs to be compatible with JEDEC J‑STD‑020C, using the parameters listed below. As a
general guideline, Cree LED recommends that users follow the recommended soldering profile provided by the manufacturer of the solder
paste used, and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
tP
TP Critical Zone
TL to TP
Ramp-up
TL tS
Temperature
Tsmax
Tsmin
ts Ramp-down
Preheat
25
t 25˚C to Peak
Time IPC/JEDEC J-STD-020C
Note: All temperatures refer to the topside of the package, measured on the package body surface.
25
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
NOTES
Measurements
The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only
and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number
of factors that are not within Cree LED’s control and are not intended or provided as operational specifications for the products. Calculated
values are provided for informational purposes only and are not intended or provided as specifications.
Lumen Maintenance
Cree LED now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen
maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree LED’s lumen maintenance testing and
forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive
current affect the LED junction temperature.
Moisture Sensitivity
Cree LED recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to
soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XP-L LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in
conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree LED recommends sealing any unsoldered
LEDs in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree LED representative or from the Product
Ecology section of the Cree LED website.
REACH Compliance
REACH substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency
(ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree LED
representative to insure you get the most up-to-date REACH Declaration. REACH banned substance information (REACH Article 67) is
also available upon request.
26
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
NOTES - CONTINUED
UL® Recognized Component
This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED
package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
27
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
MECHANICAL DIMENSIONS
Alternate bottom views of the XP-L High Density LED are shown in the diagrams below.
Anode
28
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
6 5 5 4 4 3 3 2
TICE NOTICE REVISONS
TIAL.CREE
THIS PLOT AND
CONFIDENTIAL. THIS THE INFORMATION
PLOT AND THE INFORMATION REV DESCRIPTION
HIN ARE THEWITHIN
CONTAINED PROPRIETARY AND AND
ARE THE PROPRIETARY
REV
NFORMATION
CONFIDENTIAL OF CREE, OF
INFORMATION INC. THIS
CREE, PLOT
INC. THIS PLOT G AD
PIED,MAY
REPRODUCED OR DISCLOSED TO TOANY
PERSON THEMECHANICAL
WITHOUT
WRITTEN
UNAUTHORIZED DIMENSIONS
NOT BE COPIED, REPRODUCED
PERSONCONSENT
WITHOUT
OR DISCLOSED
- CONTINUED
THE WRITTEN CONSENT
ANY
OF CREE INC.
3.45 3.30
ANODE Anode
C
1.30 1.30
TICAL OPTICAL OPTICAL
ENCE OPTICAL REFERENCE REFERENCE REFERENCE
1.0 1.0
3.50 Intensity
XP-L High Density & High 3.30 3.20
.30 .50 .72
.50 .30 .72
.50 .50
.50
.64
.90
B
.25
.25
3.30 .25
.75
.40
.50
.70 .96
1.50 ALL DIMENSIONS ARE ± .13MM UNLESS O
ALL DIMENSION
1.30
1.30 1.01 RECOMMENDED STENCIL OPENINGS
2.30 UNLESS OTHERWISE DRAWN SPECIFIED DATE
BY
D. CRONIN 3/13/15SPECIFIED D. CRONIN
DRAWN BY
A RECOMMENDED COPPER LAYOUT RECOMMENDED SOLDER PAD DIMENSIONS ARE IN UNLESS OTHERWISE
3.30 3.30
(SOLDER RESIST PATTERN) MILLIMETERS AND AFTER CHECKFINISH. DATE
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
CHECK
Notes: 1.6
SURFACE FINISH:
X
SURFACE FINISH:
.5
SCALE
1.6 22.000
• Cree LED6recommends5 using thermal pad kickouts
5
to maximize
4 component thermal4performance.
3 3 2
• Cree LED recommends using white solder mask material to minimize system optical loss.
* This stencil has been tested and optimized for the avoidance of voiding when using ALPHA® LUMET® P30 Maxrel solder paste. For other solder
pastes, a “window pane” design for the thermal pad stencil may result in a lower voiding percentage. Contact your local Cree LED Field Applications
Engineer for consultation regarding your specific application.
29
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
A
B
TAPE AND REEL
All Cree LED carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
6
NOTICE
5 4 A 3
CREE
CREE CONFIDENTIAL.
CONFIDENTIAL.
NOTICE
NOTICE
THIS
THIS PLOT
PLOT AND
AND THE
THE INFORMATION
INFORMATION
POCKET SIZE
XPLAWT-00-xxxx-xxxxxxxxx SECTION A-A
CONTAINED
CONTAINED WITHIN
WITHIN ARE
ARE THE
THE PROPRIETARY
PROPRIETARY AND
AND 6 5 4 3
Ao - 23.60
: 1 mm [.142"]
CONFIDENTIAL
CONFIDENTIAL INFORMATION
INFORMATION OF
OF CREE,
CREE, INC.
INC. THIS
THIS PLOT
PLOT
NOTICE
MAY
MAY NOT
2.00 [.079]
NOTBEBE COPIED,
COPIED, REPRODUCED
REPRODUCED OR
OR DISCLOSED
DISCLOSED TO
TO ANY
ANY
D UNAUTHORIZED
Ø1.50 SCALE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
UNAUTHORIZED PERSONWITHOUT
PERSON WITHOUT THE THE WRITTEN
WRITTEN CONSENT
CONSENT CONTAINED WITHIN ARE THE PROPRIETARY AND
P2
High Density
OF
OF CREE
CREE INC.
INC.
POCKET SIZE
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT
OF CREE INC.
THE WRITTEN CONSENT
+.10
-.00 Bo - POCKET
3.60 mmSIZE
[.142"]
4.00 [.157] POCKET SIZE
2.00 [.079]
2.00 [.079] Ø1.50 1.75 [.069] Ao--
Ao 3.60mm
3.60 mm[.142"]
[.142"]
Ø1.50
Ko - 3.00 mm
Ao -[.118"]
DD
Po DETAILE1B
P2
P2 D 2.00 [.079] +.10
+.10 Ø1.50 3.60 mm [.142"]
CATHODEP2 SIDE SCALE 2 : 1
-.00
-.00 +.10 Bo--
Bo 3.60mm
3.60 mm[.142"]
[.142"]
4.00 [.157]
4.00 [.157] -.00 Bo - 3.60 mm [.142"]
4.00 [.157] 1.75 [.069]
1.75 [.069]
Po
Po Po
E1
E1
1.75 [.069] Ko--
Ko 3.0
3.00
3.00
°
mm
mmKo3.60[.118"]
-[.118"]
[.142]
3.00 mm [.118"]
CATHODESIDE
CATHODE SIDE CATHODE SIDE
E1 Bo
12.00 [.472]
5.50 [.217]F NOMINAL C
3.60 [.142]
3.60 [.142] 3.60 [.142]
10.25 3.0 °°
3.0 3.0 ° Bo
C 12.30 [.484] Bo
Bo
[.404] 12.00
12.00 [.472]
[.472] 12.00 [.472]
Ø1.50 5.50 MAX
[.217]F
5.50
5.50 [.217]F
[.217]F E2 NOMINAL
NOMINAL
NOMINAL C
[.059] W CC
10.25
C
D1 10.25
10.25 12.30 [.484]
CC 12.30[.484]
12.30 [.484] [.404]
MIN MAX
[.404]
[.404] Ø1.50 E2
Ø1.50
Ø1.50 MAX
MAX
[.059] W
E2
E2
[.059]
[.059] D1 W W
ANODE SIDE
D1
D1 MIN
MIN
MIN .30 [.012]
8.00 [.315] ANODE SIDE
P T
ANODESIDE
ANODE SIDE 8.00 [.315] .30 [.012]
4.0±.1 P 1.5±.1 T
8.00 [.315]
8.00 [.315] 3.00 [.118]
8.0±.1
.30 [.012]
.30 [.012] Anode Side B
PP 1.75±.10 Ko TT
2.5±.1
B
3.00 [.118] B
Cathode
Ko Side
B
Ko
Ko 3.0 °
BB
+.3
12.0
.0
3.0 °°
3.0
3.60 [.142]
3.60 [.142] User Feed Direction
MILLIMETERS AND AFTER FINISH. CHECK MILLIMETERS
DATE AND AFTER FINISH. CHECK DATE
Durham, N.C 27703 Durham, N.C 27703
Phone (919) 313-5300
Ao END START
Phone (919) 313-5300
TOLERANCE UNLESS SPECIFIED: TOLERANCE UNLESS SPECIFIED:
ENDAo
Fax (919) 313-5558
.XX ± .25 Fax (919) 313-5558
A
.XX ± .25
START
APPROVED DATE
APPROVED DATE
.XXX ± .125 TITLE A
.XXX ± .125 X° ± .5 °
TITLE
X° THIRD
± .5 ° PROJECTION
ANGLE Carrier Tape, XPL
THIRD ANGLE PROJECTION
FOR SHEET METAL PARTS ONLY MATERIAL
DRAWN
DRAWN BYBY
FOR SHEET METAL PARTS ONLY
.X
DATE
DATE ± 1.5
Carrier Tape, XPL
MATERIAL
UNLESS
UNLESS OTHERWISE
OTHERWISE SPECIFIED
SPECIFIED .XX ± .75 SIZE DRAWING NO. REV.
.X ± ARE IN1.5
AA D.D.
C
CRONIN 5/16/14 4600 Silicon Drive
CRONIN 5/16/14
2402-00040
4600 Silicon Drive
DIMENSIONS
DIMENSIONS ARE IN
.XX ± .75 .XXX ± SIZE
.25 DRAWING NO. Durham, N.C 27703 REV.
A
C
FINAL PROTECTIVE FINISH Durham, N.C 27703
MILLIMETERS
MILLIMETERS ANDAND AFTER
.XXX AFTER
FINISH.
± FINISH.
X° ± .5 °
2402-00040
CHECK
CHECK DATE
DATE
(919) 313-5558 A
.25 FINAL PROTECTIVE FINISH Phone
Phone (919)
(919) 313-5300
313-5300
TOLERANCE
TOLERANCE X°UNLESS
UNLESS SPECIFIED:
± SPECIFIED:
.5 ° SURFACE FINISH: 1.6 SCALE
Fax 1.000
Fax (919) 313-5558
SHEET OF
1 /1
.XX ± ± .25.25
.XX A
1 /1 A
APPROVED
APPROVED DATE
DATE SCALE
6 5 4 SURFACE FINISH:
.XXX
.XXX
1.6
± ± .125.125 3 TITLE
TITLE 1.000 2 SHEET OF
1
X°X° ± ± .5 .5° °
6 5 4 3 2 CarrierTape,
Carrier Tape,XPL
XPL
1
Loaded Pockets
THIRD
THIRD ANGLE
ANGLE PROJECTION
PROJECTION MATERIAL
FOR
FOR SHEET
SHEET METAL
METAL PARTS
PARTS ONLY
ONLY MATERIAL
CC
SIZE
Cover Tape
Pocket Tape
13mm
7"
30
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
B
A
TAPE AND REEL - CONTINUED
POCKET SIZE
XP-L High Intensity
SECTION A-AmmSIZE
POCKET
Ao - POCKET
3.70 SIZE
[.146"]
XPLAWT-H0-xxxx-xxxxxxxxx SCALE 2 : 1
Ao
Bo --
Ao 3.70 mm
3.70 mm [.146"]
[.146"]
High Intensity
2.00 [.079]
+.10 +.0039 Bo
Ko--
Bo 3.70 mm [.146"]
1.20mm
3.70 [.146"]
[.047"] POCKET SIZE
P2 Ø 1.50 -.00[.0591-.0000]Do
DETAIL B
2.00 [.079]
2.00 [.079]
+.10 +.0039 Ko --
Ko 1.20 mm
1.20 mm [.047"]
[.047"]
Ao - 3.70 mm [.146"]
4.00 [.157] P2
P2 ØØSCALE
1.50+.102+.0039
1.50 : 1 -.00[.0591-.0000]Do
-.00[.0591-.0000]Do
1.75 [.069]
Po
4.00 [.157]
4.00 [.157] CATHODE SIDE
E1 Bo - 3.70 mm [.146"]
Po
Po 1.75 [.069]
1.75 [.069]
CATHODESIDE
CATHODE SIDE
2.00 [.079] E1
E1 +.10 +.0039 Ko - 1.20 mm [.047"]
P2 Ø 1.50 -.00[.0591-.0000]Do
4.00 [.157] 3.0°
Po 1.75 [.069]
12.00 [.472]
5.50 [.217]F NOMINAL E1 3.0°
3.0°
CATHODE SIDE
12.00 [.472]
12.00 [.472]
5.50 [.217]F
5.50 [.217]F 10.25 3.70 [.146]
12.30 [.484]
NOMINAL
NOMINAL
[.404] Bo
Ø 1.50 MAX
E2
10.25
10.25 3.70 [.146]
[.146]
[.059] 12.30W
12.30 [.484]
[.484] 3.70 3.0°
[.404]
[.404] Bo
MAX
MAX 12.00 [.472] Bo
ØØD1 1.50
1.50 E2
E2
MIN
[.059] 5.50 [.217]F
WW NOMINAL
[.059]
D1D1 10.25
ANODE SIDE MIN
MIN 12.30 [.484] 3.70 [.146]
[.404] Bo
Ø 1.50 MAX
E2
ANODE
ANODE SIDE
SIDE [.059] W .30 [.012]
8.00 [.315]
P D1 T
[.315] 4.0±.1
8.00 [.315]
8.00 MIN 1.5±.1 .30 [.012]
.30 [.012] Anode Side
PP 8.0±.1 TT
1.75±.10 ANODE SIDE 2.5±.1
1.20 [.047]
Cathode Side
Ko .30 [.012]
8.00 [.315]
1.20 [.047]
1.20 [.047] T
P
3.0° Ko
Ko
+.3
12.0
.0 3.0°
3.0°
1.20 [.047]
3.70 [.146] Ko
Ao
Anode Side
3.0°
3.70 [.146]
3.70 [.146] (denoted by + and circle)
Ao
Ao
User Feed Direction
END 3.70 [.146] START
Ao
Loaded Pockets
Trailer Leader
(1,000 Lamps)
160mm (min) of 400mm (min) of
empty pockets empty pockets with
sealed with tape at least 100mm
(20 pockets min.) sealed by tape
(50 empty pockets min.)
Cover Tape
Pocket Tape
13mm
7"
31
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
PACKAGING
32
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
The following order codes are active and valid order codes, but higher performance options are also available. Please see page 3 for
order codes of XLamp XP-L High Density LEDs that could serve as alternatives for the order codes set forth below.
Note
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 26).
33
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
The following order codes are active and valid order codes, but higher performance options are also available. Please see page 4 and
page 5 for order codes of XLamp XP-L High Density LEDs that could serve as alternatives for the order codes set forth below.
Minimum Luminous
Chromaticity Order Codes
Flux (lm) @ 1050 mA
Kit CCT Code Flux (lm) 70 CRI Minimum 75 CRI Typical 80 CRI Minimum
V4 440 XPLAWT-00-0000-000BV40E3
E3 5000 K V3 420 XPLAWT-00-0000-000BV30E3
V2 400 XPLAWT-00-0000-000BV20E3
V4 440 XPLAWT-00-0000-000BV40F4
F4 4750 K V3 420 XPLAWT-00-0000-000BV30F4
V2 400 XPLAWT-00-0000-000BV20F4
V4 440 XPLAWT-00-0000-000BV40E4
E4 4500 K V3 420 XPLAWT-00-0000-000BV30E4
V2 400 XPLAWT-00-0000-000BV20E4
V4 440 XPLAWT-00-0000-000BV40F5
F5 4250 K V3 420 XPLAWT-00-0000-000BV30F5
V2 400 XPLAWT-00-0000-000BV20F5
V4 440 XPLAWT-00-0000-000BV40E5
V3 420 XPLAWT-00-0000-000BV30E5
E5 4000 K V2 400 XPLAWT-00-0000-000BV20E5 XPLAWT-00-0000-000HV20E5
U6 380 XPLAWT-00-0000-000BU60E5 XPLAWT-00-0000-000LU60E5 XPLAWT-00-0000-000HU60E5
U5 360 XPLAWT-00-0000-000HU50E5
V3 420 XPLAWT-00-0000-000BV30Z5
V2 400 XPLAWT-00-0000-000BV20Z5 XPLAWT-00-0000-000HV20Z5
Z5 4000 K
U6 380 XPLAWT-00-0000-000BU60Z5 XPLAWT-00-0000-000LU60Z5 XPLAWT-00-0000-000HU60Z5
U5 360 XPLAWT-00-0000-000HU50Z5
V2 400 XPLAWT-00-0000-000HV20F6
F6 3700 K U6 380 XPLAWT-00-0000-000LU60F6 XPLAWT-00-0000-000HU60F6
U5 360 XPLAWT-00-0000-000LU50F6 XPLAWT-00-0000-000HU50F6
Note
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 26).
34
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
The following order codes are active and valid order codes, but higher performance options are also available. Please see page 6 and
page 7 for order codes of XLamp XP-L High Density LEDs that could serve as alternatives for the order codes set forth below.
Minimum Luminous
Chromaticity Order Codes
Flux (lm) @ 1050 mA
Kit CCT Code Flux (lm) 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
V2 400 XPLAWT-00-0000-000HV20E6
E6 3500 K U6 380 XPLAWT-00-0000-000LU60E6 XPLAWT-00-0000-000HU60E6
U5 360 XPLAWT-00-0000-000LU50E6 XPLAWT-00-0000-000HU50E6
U6 380 XPLAWT-00-0000-000HU60Z6
Z6 3500 K
U5 360 XPLAWT-00-0000-000LU50Z6 XPLAWT-00-0000-000HU50Z6
U6 380 XPLAWT-00-0000-000HU60F7
F7 3250 K U5 360 XPLAWT-00-0000-000LU50F7 XPLAWT-00-0000-000HU50F7
U4 340 XPLAWT-00-0000-000LU40F7 XPLAWT-00-0000-000HU40F7
U6 380 XPLAWT-00-0000-000HU60E7
U5 360 XPLAWT-00-0000-000LU50E7 XPLAWT-00-0000-000HU50E7
U4 340 XPLAWT-00-0000-000LU40E7 XPLAWT-00-0000-000HU40E7
E7 3000 K
U3 320 XPLAWT-00-0000-000PU30E7
U2 300 XPLAWT-00-0000-000PU20E7 XPLAWT-00-0000-000UU20E7
T6 280 XPLAWT-00-0000-000PT60E7 XPLAWT-00-0000-000UT60E7
U5 360 XPLAWT-00-0000-000HU50Z7
U4 340 XPLAWT-00-0000-000LU40Z7 XPLAWT-00-0000-000HU40Z7
Z7 3000 K U3 320 XPLAWT-00-0000-000PU30Z7
U2 300 XPLAWT-00-0000-000PU20Z7 XPLAWT-00-0000-000UU20Z7
T6 280 XPLAWT-00-0000-000PT60Z7 XPLAWT-00-0000-000UT60Z7
U5 360 XPLAWT-00-0000-000HU50F8
U4 340 XPLAWT-00-0000-000LU40F8 XPLAWT-00-0000-000HU40F8
U3 320 XPLAWT-00-0000-000PU30F8
F8 2850 K
U2 300 XPLAWT-00-0000-000PU20F8 XPLAWT-00-0000-000UU20F8
T6 280 XPLAWT-00-0000-000PT60F8 XPLAWT-00-0000-000UT60F8
T5 260 XPLAWT-00-0000-000PT50F8 XPLAWT-00-0000-000UT50F8
U5 360 XPLAWT-00-0000-000HU50E8
U4 340 XPLAWT-00-0000-000LU40E8 XPLAWT-00-0000-000HU40E8
U3 320 XPLAWT-00-0000-000PU30E8
E8 2700 K
U2 300 XPLAWT-00-0000-000PU20E8
T6 280 XPLAWT-00-0000-000PT60E8 XPLAWT-00-0000-000UT60E8
T5 260 XPLAWT-00-0000-000PT50E8 XPLAWT-00-0000-000UT50E8
Note
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 26).
35
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
Minimum Luminous
Chromaticity Order Codes
Flux (lm) @ 1050 mA
Kit CCT Code Flux (lm) 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
U4 340 XPLAWT-00-0000-000HU40Z8
U3 320
Z8
2700 K U2 300 XPLAWT-00-0000-000PU20Z8
T6 280 XPLAWT-00-0000-000PT60Z8 XPLAWT-00-0000-000UT60Z8
T5 260 XPLAWT-00-0000-000PT50Z8 XPLAWT-00-0000-000UT50Z8
Note
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 26).
36
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
The following order codes are active and valid order codes, but higher performance options are also available. Please see page 8 for
order codes of XLamp XP-L High Intensity LEDs that could serve as alternatives for the order codes set forth below.
Note
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 26).
37
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
The following order codes are active and valid order codes, but higher performance options are also available. Please see page 9 for
order codes of XLamp XP-L High Intensity LEDs that could serve as alternatives for the order codes set forth below.
Minimum Luminous
Chromaticity Order Codes
Flux (lm) @ 1050 mA
Kit CCT Code Flux (lm) 70 CRI Minimum 75 CRI Typical 80 CRI Minimum
Note
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 26).
38
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.
XLAMP ® XP-L LED
The following order codes are active and valid order codes, but higher performance options are also available. Please see page 10 for
order codes of XLamp XP-L High Intensity LEDs that could serve as alternatives for the order codes set forth below.
Minimum Luminous
Chromaticity Order Codes
Flux (lm) @ 1050 mA
Kit CCT Code Flux (lm) 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
U5 360 XPLAWT-H0-0000-000LU50E6
E6 3500 K U4 340 XPLAWT-H0-0000-000LU40E6 XPLAWT-H0-0000-000HU40E6
U3 320 XPLAWT-H0-0000-000LU30E6 XPLAWT-H0-0000-000HU30E6
U4 340 XPLAWT-H0-0000-000LU40F7 XPLAWT-H0-0000-000HU40F7
F7 3250 K U3 320 XPLAWT-H0-0000-000LU30F7 XPLAWT-H0-0000-000HU30F7
U2 300 XPLAWT-H0-0000-000LU20F7 XPLAWT-H0-0000-000HU20F7
U4 340 XPLAWT-H0-0000-000LU40E7 XPLAWT-H0-0000-000HU40E7
U3 320 XPLAWT-H0-0000-000LU30E7 XPLAWT-H0-0000-000HU30E7
U2 300 XPLAWT-H0-0000-000LU20E7 XPLAWT-H0-0000-000HU20E7
E7 3000 K
T6 280 XPLAWT-H0-0000-000PT60E7
T5 260 XPLAWT-H0-0000-000PT50E7 XPLAWT-H0-0000-000UT50E7
T4 240 XPLAWT-H0-0000-000PT40E7 XPLAWT-H0-0000-000UT40E7
U4 340 XPLAWT-H0-0000-000LU40F8
U3 320 XPLAWT-H0-0000-000LU30F8 XPLAWT-H0-0000-000HU30F8
U2 300 XPLAWT-H0-0000-000LU20F8 XPLAWT-H0-0000-000HU20F8
F8 2850 K T6 280 XPLAWT-H0-0000-000PT60F8
T5 260 XPLAWT-H0-0000-000PT50F8
T4 240 XPLAWT-H0-0000-000PT40F8 XPLAWT-H0-0000-000UT40F8
T3 220 XPLAWT-H0-0000-000PT30F8
U4 340 XPLAWT-H0-0000-000LU40E8
U3 320 XPLAWT-H0-0000-000LU30E8 XPLAWT-H0-0000-000HU30E8
U2 300 XPLAWT-H0-0000-000LU20E8 XPLAWT-H0-0000-000HU20E8
E8 2700 K T6 280 XPLAWT-H0-0000-000PT60E8
T5 260 XPLAWT-H0-0000-000PT50E8
T4 240 XPLAWT-H0-0000-000PT40E8 XPLAWT-H0-0000-000UT40E8
T3 220 XPLAWT-H0-0000-000PT30E8
Note
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 26).
39
© 2014-2022 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are CLD-DS97
registered trademarks, and the Cree LED logo is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. Other trademarks, REV 7A
product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship
or association.