Professional Documents
Culture Documents
Merged SP
Merged SP
00
Computer program for the Strength Design of Reinforced Concrete Sections
Copyright - 1988-2022, STRUCTUREPOINT, LLC.
All rights reserved
y
x
Licensee stated below acknowledges that STRUCTUREPOINT (SP) is not and cannot be responsible for either the accuracy or adequacy of the material
supplied as input for processing by the spColumn computer program. Furthermore, STRUCTUREPOINT neither makes any warranty expressed nor implied
with respect to the correctness of the output prepared by the spColumn program. Although STRUCTUREPOINT has endeavored to produce spColumn error
free the program is not and cannot be certified infallible. The final and only responsibility for analysis, design and engineering documents is the licensee's.
Accordingly, STRUCTUREPOINT disclaims all responsibility in contract, negligence or other tort for any analysis, design or engineering documents prepared
in connection with the use of the spColumn program. Licensed to: SIMBADDA, Cubicle. License ID: -XXXXX
STRUCTUREPOINT - spColumn v6.00 Page | 2
Licensed to: SIMBADDA, Cubicle. License ID: -XXXXX 12/5/2022
D:\CUBICLE PROJECT\2022\Laporan Struktur\Gudang LPG\SP COLUMN\Kolom K1.col 9:39 AM
Contents
1. General Information .........................................................................................................................................3
2. Material Properties...........................................................................................................................................3
2.1. Concrete...................................................................................................................................................3
2.2. Steel .........................................................................................................................................................3
3. Section.............................................................................................................................................................3
3.1. Shape and Properties...............................................................................................................................3
3.2. Section Figure ..........................................................................................................................................4
4. Reinforcement .................................................................................................................................................4
4.1. Bar Set: ASTM 615M ...............................................................................................................................4
4.2. Confinement and Factors .........................................................................................................................4
4.3. Arrangement.............................................................................................................................................4
4.4. Bars Provided...........................................................................................................................................5
5. Factored Loads and Moments with Corresponding Capacities .......................................................................5
List of Figures
Figure 1: Column section.....................................................................................................................................4
STRUCTUREPOINT - spColumn v6.00 Page | 3
Licensed to: SIMBADDA, Cubicle. License ID: -XXXXX 12/5/2022
D:\CUBICLE PROJECT\2022\Laporan Struktur\Gudang LPG\SP COLUMN\Kolom K1.col 9:39 AM
1. General Information
File Name D:\CUBICLE
PROJECT\2022\Laporan
S...\Kolom K1.col
Project Gudang LPG
Column 38 x 38
Engineer hesty
Code ACI 318-14
Bar Set ASTM 615M
Units Metric
Run Option Investigation
Run Axis X - axis
Slenderness Not Considered
Column Type Structural
2. Material Properties
2.1. Concrete
Type Standard
f'c 25 MPa
Ec 23500 MPa
fc 21.25 MPa
εu 0.003 mm/mm
β1 0.85
2.2. Steel
Type Standard
fy 420 MPa
Es 200000 MPa
εyt 0.0021 mm/mm
3. Section
3.1. Shape and Properties
Type Rectangular
Width 380 mm
Depth 380 mm
Ag 144400 mm2
Ix 1.73761e+009 mm4
Iy 1.73761e+009 mm4
rx 109.697 mm
ry 109.697 mm
Xo 0 mm
Yo 0 mm
STRUCTUREPOINT - spColumn v6.00 Page | 4
Licensed to: SIMBADDA, Cubicle. License ID: -XXXXX 12/5/2022
D:\CUBICLE PROJECT\2022\Laporan Struktur\Gudang LPG\SP COLUMN\Kolom K1.col 9:39 AM
y
x
4. Reinforcement
4.1. Bar Set: ASTM 615M
Bar Diameter Area Bar Diameter Area Bar Diameter Area
mm mm2 mm mm2 mm mm2
#10 9.50 71.00 #13 12.70 129.00 #16 15.90 199.00
#19 19.10 284.00 #22 22.20 387.00 #25 25.40 510.00
#29 28.70 645.00 #32 32.30 819.00 #36 35.80 1006.00
#43 43.00 1452.00 #57 57.30 2581.00
4.3. Arrangement
Pattern Sides different
Bar layout Rectangular
Cover to Transverse bars
Clear cover ---
Bars ---
y
x
fs=0 fs=0
(Pmax) (Pmax)
fs=0.5fy fs=0.5fy
fs=0 fs=0
380 x 380 mm
fs=0.5fy fs=0.5fy
Code: ACI 318-14
Units: Metric
-1000
STRUCTUREPOINT - spColumn v6.00 (TM). Licensed to: SIMBADDA, Cubicle. License ID: -XXXXX
y
x
Licensee stated below acknowledges that STRUCTUREPOINT (SP) is not and cannot be responsible for either the accuracy or adequacy of the material
supplied as input for processing by the spColumn computer program. Furthermore, STRUCTUREPOINT neither makes any warranty expressed nor implied
with respect to the correctness of the output prepared by the spColumn program. Although STRUCTUREPOINT has endeavored to produce spColumn error
free the program is not and cannot be certified infallible. The final and only responsibility for analysis, design and engineering documents is the licensee's.
Accordingly, STRUCTUREPOINT disclaims all responsibility in contract, negligence or other tort for any analysis, design or engineering documents prepared
in connection with the use of the spColumn program. Licensed to: SIMBADDA, Cubicle. License ID: -XXXXX
STRUCTUREPOINT - spColumn v6.00 Page | 2
Licensed to: SIMBADDA, Cubicle. License ID: -XXXXX 12/5/2022
D:\CUBICLE PROJECT\2022\Laporan Struktur\Gudang LPG\SP COLUMN\Kolom K2.col 9:50 AM
Contents
1. General Information .........................................................................................................................................3
2. Material Properties...........................................................................................................................................3
2.1. Concrete...................................................................................................................................................3
2.2. Steel .........................................................................................................................................................3
3. Section.............................................................................................................................................................3
3.1. Shape and Properties...............................................................................................................................3
3.2. Section Figure ..........................................................................................................................................4
4. Reinforcement .................................................................................................................................................4
4.1. Bar Set: ASTM 615M ...............................................................................................................................4
4.2. Confinement and Factors .........................................................................................................................4
4.3. Arrangement.............................................................................................................................................4
4.4. Bars Provided...........................................................................................................................................5
5. Factored Loads and Moments with Corresponding Capacities .......................................................................5
List of Figures
Figure 1: Column section.....................................................................................................................................4
STRUCTUREPOINT - spColumn v6.00 Page | 3
Licensed to: SIMBADDA, Cubicle. License ID: -XXXXX 12/5/2022
D:\CUBICLE PROJECT\2022\Laporan Struktur\Gudang LPG\SP COLUMN\Kolom K2.col 9:50 AM
1. General Information
File Name D:\CUBICLE
PROJECT\2022\Laporan
S...\Kolom K2.col
Project Gudang LPG
Column 15 x 25
Engineer hesty
Code ACI 318-14
Bar Set ASTM 615M
Units Metric
Run Option Investigation
Run Axis X - axis
Slenderness Not Considered
Column Type Structural
2. Material Properties
2.1. Concrete
Type Standard
f'c 25 MPa
Ec 23500 MPa
fc 21.25 MPa
εu 0.003 mm/mm
β1 0.85
2.2. Steel
Type Standard
fy 420 MPa
Es 200000 MPa
εyt 0.0021 mm/mm
3. Section
3.1. Shape and Properties
Type Rectangular
Width 250 mm
Depth 300 mm
Ag 75000 mm2
Ix 5.625e+008 mm4
Iy 3.90625e+008 mm4
rx 86.6025 mm
ry 72.1688 mm
Xo 0 mm
Yo 0 mm
STRUCTUREPOINT - spColumn v6.00 Page | 4
Licensed to: SIMBADDA, Cubicle. License ID: -XXXXX 12/5/2022
D:\CUBICLE PROJECT\2022\Laporan Struktur\Gudang LPG\SP COLUMN\Kolom K2.col 9:50 AM
y
x
4. Reinforcement
4.1. Bar Set: ASTM 615M
Bar Diameter Area Bar Diameter Area Bar Diameter Area
mm mm2 mm mm2 mm mm2
#10 9.50 71.00 #13 12.70 129.00 #16 15.90 199.00
#19 19.10 284.00 #22 22.20 387.00 #25 25.40 510.00
#29 28.70 645.00 #32 32.30 819.00 #36 35.80 1006.00
#43 43.00 1452.00 #57 57.30 2581.00
4.3. Arrangement
Pattern Sides different
Bar layout Rectangular
Cover to Transverse bars
Clear cover ---
Bars ---
y
x
fs=0 fs=0
(Pmax) (Pmax)
fs=0.5fy fs=0.5fy
fs=0 fs=0
250 x 300 mm
fs=0.5fy fs=0.5fy
Code: ACI 318-14
Units: Metric
Time: 09:50:38
(Pmin) (Pmin)
-400
STRUCTUREPOINT - spColumn v6.00 (TM). Licensed to: SIMBADDA, Cubicle. License ID: -XXXXX