Professional Documents
Culture Documents
Select one:
a. VRRP
b. RFN
c. VSRP
d. BFD
Question 2
Complete
1.00 points out of 1.00
Flag question
Question text
Which SNMP mechanism is used to alert administrators of network error conditions?
Select one:
a. traps
b. puts
c. gets
d. sets
Question 3
Complete
1.00 points out of 1.00
Flag question
Question text
What are the three types of IPv6 address classes? (Choose three.)
Select one or more:
a. broadcast
b. directcast
c. anycast
d. dualcast
e. multicast
f. unicast
Question 4
Complete
1.00 points out of 1.00
Flag question
Question text
Which protocol allows multiple VLANs to span switches over a single physical linkSelect one:
a. Layer 3
b. Layer 2
c. Layer 4
d. Layer 1
Question 5
Complete
1.00 points out of 1.00
Flag question
Question text
Which protocol allows multiple VLANs to be managed by a single STP instance?
Select one:
Question 6
Complete
1.00 points out of 1.00
Flag question
Question text
Which port does Telnet use?
Select one:
a. UDP 37
b. TCP 23
c. TCP 21
d. TCP 79
Question 7
Complete
1.00 points out of 1.00
Flag question
Question text
Which network is 192.168.28.140/29 a member of?
Select one:
a. 192.168.28.128
b. 192.168.28.134
c. 192.168.28.136
d. 192.168.28.130
Question 8
Complete
1.00 points out of 1.00
Flag question
Question text
Which protocol is used to send error and control messages for routed packets?
Select one:
a. IGMP
b. DHCP
c. IS-IS
d. ICMP
Question 9
Complete
0.00 points out of 1.00
Flag question
Question text
Which service provides a list of rendezvous points to PIM sparse-mode routers?
Select one:
a. DVMRP
b. ICMP Snooping
c. BSR
d. ECMP
Question 10
Complete
0.00 points out of 1.00
Flag question
Question text
What are two reasons to deploy LAGs? (Choose two.)
Select one or more:
b. improve redundancy
d. increase throughput
Question 11
Complete
1.00 points out of 1.00
Flag question
Question text
Which protocol provides the IP address of a fully qualified domain name?
Select one:
a. HTTP
b. LLDP
c. DNS
d. FDP
Question 12
Complete
1.00 points out of 1.00
Flag question
Question text
What is the function of QoS policing?
Select one:
Question 13
Complete
0.00 points out of 1.00
Flag question
Question text
Which fiber optic cable requires lasers for reliable transmission?
Select one:
a. Single-mode
b. Multi-mode
c. Breakout-mode
d. Multi-fiber
Question 14
Complete
1.00 points out of 1.00
Flag question
Question text
Which protocol allows multiple VLANs to span switches over a single physical link?
Select one:
a. 802.1p
b. 802.11ac
c. 802.1q
d. 802.1s
Question 15
Complete
1.00 points out of 1.00
Flag question
Question text
What are two types of LAGs? (Choose two.)
Select one or more:
a. MAC-based
b. static
c. dynamic
d. round-robin
e. layer 3
Question 16
Complete
1.00 points out of 1.00
Flag question
Question text
A subnet mask of /26 will allow for how many hosts?
Select one:
a. 64
b. 126
c. 62
d. 26
Question 17
Complete
0.00 points out of 1.00
Flag question
Question text
A DSCP value of 27 maps to which CoS value?
Select one:
a. 4
b. 5
c. 3
d. 2
Question 18
Complete
1.00 points out of 1.00
Flag question
Question text
Which protocol maintains an STP instance for each VLAN configured in the network?
Select one:
Question 19
Complete
1.00 points out of 1.00
Flag question
Question text
How many multicast IP addresses are there for each multicast MAC address?
Select one:
a. 8
b. 16
c. 64
d. 32
Question 20
Complete
0.00 points out of 1.00
Flag question
Question text
What is the common name of the switch used as a reference point for loop avoidance by all other
switches in the network?
Select one:
a. root bridge
b. master bridge
c. designated bridge
d. primary bridge
Which port does Telnet use?
Select one:
a. UDP 37
b. TCP 79
c. TCP 23
d. TCP 21
Question 2
Complete
0.00 points out of 1.00
Flag question
Question text
Which two sub-layers is the Data Link layer broken into? (Choose two.)
Select one or more:
Question 3
Complete
1.00 points out of 1.00
Flag question
Question text
What is the broadcast address for 192.168.40.129/23?
Select one:
a. 192.168.41.255
b. 192.168.255.255
c. 192.168.40.255
d. 192.168.40.0
Question 4
Complete
1.00 points out of 1.00
Flag question
Question text
Which two parts make up an IP address? (Choose two.)
Select one or more:
a. host
b. socket
c. port
d. mask
e. network
Question 5
Complete
0.00 points out of 1.00
Flag question
Question text
In an 803.ad which value identifies the ports that belong to the same LAG?
Select one:
a. mode
b. port ID
c. admin key
d. sync
Question 6
Complete
1.00 points out of 1.00
Flag question
Question text
How many bits in the 802.1Q Ethernet frame are used to define the VLAN ID?
Select one:
a. 2
b. 24
c. 12
d. 8
Question 7
Complete
1.00 points out of 1.00
Flag question
Question text
What is the most preferred attribute for BGP?
Select one:
a. origin code
b. shortest AS-Path
c. highest local-preference
d. highest MED
Question 8
Complete
1.00 points out of 1.00
Flag question
Question text
Which two routing protocols are link-state types? (Choose two.)
Select one or more:
a. BGP
b. IS-IS
c. DVMRP
d. OSPF
e. RIP
Question 9
Complete
1.00 points out of 1.00
Flag question
Question text
What is the common name of the 802.1w protocol?
Select one:
a. SSTP
b. MSTP
c. RSTP
d. STP
Question 10
Complete
1.00 points out of 1.00
Flag question
Question text
Which OSI layer is responsible for routing data through the network?
Select one:
a. Layer 3
b. Layer 4
c. Layer 2
d. Layer 1
Question 11
Complete
1.00 points out of 1.00
Flag question
Question text
Which technology passes electrical power along with data on Ethernet cabling?
Select one:
a. IEEE 1100
b. PoE
c. PoS
d. MPLS
Question 12
Complete
0.00 points out of 1.00
Flag question
Question text
Which protocol provides authentication for users connected to a network port?
Select one:
a. AAA
b. 802.1X
c. NAT
d. L2TP
Question 13
Complete
0.00 points out of 1.00
Flag question
Question text
Which type of route has the lowest default Administrative Distance?
Select one:
a. Static
b. eBGP
c. IS-IS
d. OSPF
Question 14
Complete
1.00 points out of 1.00
Flag question
Question text
Which VLAN do all interfaces belong to by default?
Select one:
a. 1
b. 1100
c. 0
d. 4095
Question 15
Complete
1.00 points out of 1.00
Flag question
Question text
Which protocol enables standardized discovery of network devices?
Select one:
a. LDP
b. LLDP
c. FDP
d. LACP
Question 16
Complete
0.00 points out of 1.00
Flag question
Question text
Which field in an 802.1Q Ethernet frame indicates the frame priority level?
Select one:
a. Preamble
b. CoS
c. Precedence
d. DSCP
Question 17
Complete
0.00 points out of 1.00
Flag question
Question text
Which term is used to describe when multiple smaller networks are combined together to form one
larger network?
Select one:
a. supernetting
b. internetting
c. subnetting
d. multinetting
Question 18
Complete
1.00 points out of 1.00
Flag question
Question text
Which protocol provides the ability to emulate many different WAN technologies over a single
Ethernet/IP network?
Select one:
a. MPLS
b. PoS
c. Frame Relay
d. ATM
Question 19
Complete
0.00 points out of 1.00
Flag question
Question text
Which field in the Ethernet frame headers contains the unique address of the station that is
transmitting the frame?
Select one:
a. Source IP
b. Source MAC
c. Source Port
d. Source Socket
Question 20
Complete
0.00 points out of 1.00
Flag question
Question text
Which two LSA types are generated exclusively by ABRs? (Choose two.)
Select one or more:
a. Summary
b. ASBR - Summary
c. Router
d. External
e. Network
a. IGMP
b. RPF
c. BSR
d. RP
What are the two BPDU types used by 802.1D? (Choose two.)
Select one or more:
a. election
d. configuration
e. synchronization
Next
How many bits in the 802.1Q Ethernet frame are used to define the VLAN ID?
Select one:
a. 24
b. 2
c. 12
d. 8