Professional Documents
Culture Documents
3.Define the following terms a) Active Power b) Power factor c) RMS value d) Average
value of an AC quantity
8. State the importance of high pf. State reasons for low pf.
11.Define the following terms and state the units: a)Magnetic flux density b)Magnetic
field strength c)Reluctance
12.Define and derive the expression of RMS value of sine wave AC.
13.A resistance of 20 ohm is connected in series with capacitance of 500 Micro Farad. AC
voltage of 200 V, 50 Hz is applied to the branch. Find Active power, Reactive power and
Powerfactor.
14.Explain resistive AC circuit & Derive expression for average power drawn.
15.A non inductive resistor of 5 ohm is connected in series with pure inductance of 5mH.
Find power drawn, pf, reactive power, impedance and current if applied voltage is 200V
(rms), 50Hz.
17.Find voltage across 300 ohms and 200 ohms in circuit shown in following figure.
18.A steel ring of mean diameter 10 cm has a saw cut of 2 mm in it. The ring is wound with
300turns of a coil carrying 4A current. Relative permeability of steel is 800.Find flux
density in the air gap.
19.A soft iron ring of mean diameter 15cm is uniformly wound with 170 turns of an insulated
copper wire. 1.8 A dc current is passed in the coil. Find flux density in the ring if relative
permeability of soft iron at that flux density is 600.