Professional Documents
Culture Documents
This document describes that how to increase the block size of any SAE
If size alteration alarm is raised run below command to see that which SAE block
size needs to be checked.
DBTSP:TAB=SAACTIONS;
Printout will tell you the block name, SAE number, current value etc.
saaep:sae=1830;
Look for block name in ALEX SIZE ALTERATION EVENTS IN BSC/TRC. SAE block
size range is available in this document. Increase the size of block, for whom
alarm is raised by below command
saaii:Sae=500,block=RTARH,ni=15000;
For example above command will set the block size of block RTARH to 15000.
Please refer to ALEX of SAAII.